Willem Eprom Programmer Manual 435165

Willem EPROM Programmer PCB5.0C Manual

-1-

Willem EPROM Programmer Manual

一、Overview Willem Eprom programmer can be use to 

Upgrading, Programming BIOS chip, Repairing PC motherboard BIOS chip.



VCD, DVD, Color TV, Copier, Fax machine, Printer main board maintaining or reparing.



Car memory device code reading, writing



MCU development: programming for MCS-51 series, AVR series and PIC series MCU. Programming for over 1500 IC devices, includes EPROM , EEPROM , FLASH , PIC , AVR , MCS-51 , MCS-48, 27Cxx , 28Cxx 28Fxx , 29Fxx , AT29Cxxx , 24Cxx , 93Cxx , PIC16xxx ,DS12xx ,AT89Cxx , AT89Cx051 , AT25xxx , AT90Sxxx , EPROM16bit , 29Fx00 , 28Fx00

New dual powered (USB/AC) Willem EPROM Programmer latest design PCB5.0 C *** The Latest Version Available *** Features and Advantages: Can program EPROM, EEPROM, FLASH Burner (Vpp 12.5V, 21V, 25V); s CHIPS (EPROM, EEPROM, FLASH, I2C, PIC, MCS-51, AVR, 93Cxx, ISP) and more; This hardware version (PCB5.0C) is more STABLE than version PCB3B; It can program up to 20% faster than Willem EPROM Programmer (PCB3.5C) / (PCB4C) and 50% faster than the PCB3B+; Takes power from a USB port or from an optional external power supply (not supplied); You can choose between Version PCB3B and PCB5.0 using jumper setting if required. Latest Version 0.98D8 - adds extensive

for Winbond flash chips and PIC Micro family

This NEW PCB5.0C has adapters PLCC32 (s 3.3V devices) and Firmware Hub /LPC on -board Software Features : 

Windows based programming software 98 / ME / NT / 2000 / XP

Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

-2

Latest !! Software version 0.98D8 can run on The hardware PCB3.5/PCB4C/ PCB4.5C / PCB5.0C only.



No The hardware PCB3B, Enhanced Willem and Willem Ver.4 & Ver4.5



Software willem for PCB45C/ PCB5.0C version0.98D8 for over PICs microchip more than Software 0.97ja. -. Add PIC microchip 12bit (FLASH memory) PIC12F508/509 , PIC10F200/202/204/206 , PIC16F505 , PIC16F54/57 -. Add PIC18Fxxx PIC18F242 , 18F248 , 18F252 , 18F258 , 18F442 , 18F448 , 16F452 , 16F458 PIC18F1220 , 18F2220 , 18F4220 , 18F1320 , 18F2320 , 18F4320 PIC18F6520 , 18F6620 , 18F6720 , 18F8520 , 18F8620 , 18F8720 PIC18F2331 , 18F2431 , 18F4331 , 18F4431 PIC18F6525 , 18F6621 , 18F8525 , 18F8621 PIC18F6585 , 18F6680 , 18F8585 , 18F8680 PIC18F2439 , 18F2539 , 18F4439 , 18F4539 PIC18F6410 , 18F8410 , 18F6490 , 18F8490 -. Add PIC18Fxxx PIC18F2410 , PIC18F2420 , PIC18F2455 PIC18F2510 , PIC18F2515 , PIC18F2520 , PIC18F2525 , PIC18F2550 , PIC18F2585 PIC18F2610 , PIC18F2620 , PIC18F2680 PIC18F4410, PIC18F4420 , PIC18F4455 PIC18F4510 , PIC18F4515 , PIC18F4520 , PIC18F4525 , PIC18F4550 , PIC18F4585 PIC18F4610 , PIC18F4620 , PIC18F4680 -. Add Find and edit value OSCCAL (PIC12F629/675 , PIC16F630/676) -. Add Edit config at address 0x2008,0x2009 (PIC12F635/683 , PIC16F636/684/688 , PIC16F785) -. Fixed Programming PIC all -. Test on chip PIC12F675 , PIC16F676 , PIC16F684 ,PIC16F767, PIC16F74 PIC16F872 , PIC16F876 , PIC16F877, PIC16F876A, PIC16F873A, PIC16F819 PIC16F84 , PIC16F84A , PIC16F628, PIC16F628A, eprom PIC12C509JW , PIC16C505JW , PIC16C711JW , PIC16CE625JW PIC18F458 , PIC18F4320 , PIC18LF258 , PIC18F4539 , PIC18F4431 -. Fixed Write/read/ EEPROM 18F4550 -. Fixed Bug program 18Fxxx run on Windows XP/2000 (test PIC18F4539 , PIC18F2680 , PIC18F2431 , PIC18F258 , PIC18F4220 , PIC18F4550) -. Add find OSCCAL 10Fx00, 12F50x, 12F6xx (test PIC10F202, 12F509, 12F675) -. Fixed Programm AT89C8253 (Want modify Adapter MCS-51) (test on AT89S8253)

Production control by an engineer who developed "Willem EPROM Programmer Version PCB3b (Standard/Universal) " and developed software Free (Now!! 0.97ja) , 0.97j , 0.97i+ , 0.98i , 0.97i , 0.97h , 0.97g Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

-3The package includes :

1.Device Programming EPROM, EEPROM, FLASH Burner (Vpp

12.5V,21V,25V)

2.Software willem (included in CD) 3.Manual using the Program Willem EPROM (included in CD) 4.Computer cable (DB25) 5.USB power cable

二、Willem Programmer ed Device List

ed Device List Memory/MCU

Model # 27C64,27C128, 27C256,27C512,27C010,27C020, 27C040, 27C1001 M27C1001,M27C2001, M27C4001 27C080,M27C801,M87C257

1.EPROM

( Fixed on 5V Vcc, and Vpp is adjustble among 12V,15V,21V,25V ) 16 bit EPROM(DIP40) (1-4Mbit)

27C1024 (27C210), 27C2048 (27C2002), 27C4096 (27C4002) Eprom 16bit DIP40 adaptor is needed

16 bit EPROM(DIP42) (4-32Mbit)

M27C400(DIP40), 27C800, 27C160, 27C322 Eprom 16bit DIP42 adaptor is needed

W27E512, W27E010, W27C010, W27C020, W27C040 SST27SF256, SST27SF512, SST27SF010, SST27SF020 2.Erasable EPROM MX26C4000 Vcc = 3.3-3.6V SST37VF512, SST37VF010, SST37VF020, SST37VF040

3.EEPROM

28C65, 28C64, 28C128, 28C256, 28C512, 28C010, 28C020, 28C040 M28C16A/17A (DIP28) 28C16, XLS2816 (DIP24) AT28C64B, AT28C256, AT28C512, AT28C010, AT28C020, AT28C040

4.FLASH Memory

28F64, 28F128, 28F256, 28F512, 28F010, 28F020 MX26C1000, MX26C2000, MX28F1000, MX28F2000 Am28F256A, Am28F512A, Am28F010A, Am28F020A intel: i28F001BX, 28F004, 28F008, 28F016 SST28SF040A, LE28F4001 29F64, 29F128, 29F256, 29F512, 29F010, 29F020, 29F040, 29F080 29F001,29F002, 29F004, 29F008, 29F016, 29F032 AT29C256, AT29C512, AT29C010A, AT29C020, AT29C040, AT29C040A W29EE512, W29EE011, W29EE012, W29C020(128),W29C040 PH29EE010(W29EE011)

Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

-4-

ASD AE29F1008 (AT29C010), AE29F2008 (AT29C020) AT49F512, AT49F010, AT49F020, AT49F040 SST39SF010, SST3S9F020, SST39SF040 AT49F001, AT49F002, AT49F008A Am29F512, Am29F010, Am29F020, Am29F040.HY29F080 29F002, 29F002T, Pm29F002T with TSOP48 Adapter:

Am29F400, Am29F800, 29F160, 29F320 (read/write byte mode) HY29F200, HY29F400, HY29F800, AT49F2048A, AT49F4096A, AT49F8192A

with TSOP48 i28F200,i28F400, i28F800, i28F160 (TSOP48) Adapter (Vpp12V): 28F001(DIP32 or PLCC32) with 29LV200, 29LV400, 29LV800, 29LV160, 29LV320 (read/write byte mode) TSOP48LV Adapter: Firmware Hub: with Firmware 82802AB, 82802AC, AT49LW040, AT49LW080 Hub/LPC SST49LF002A, SST49LF003A, SST49LF004A, SST49LF008A (PLCC32) adapter: LPC flash: SST49LF020, SST49LF040 5. Serial (I2C)EEPROM

24C02, 24C04, 24C08, 24C16, 85C72, 85C82, 85C92 24C32, 24C64, 24C128, 24C256, 24C512 (allC/LC series) PCF8572,8572, PCF8582, 8582, PCF8592, 8592

6.Microwire EEPROM

8 mode:93C06, 93C46, 93LC46, 93C56, 93C57, 93C66, 93C76, 93C86,93C13,93C14 16 mode:AT59C11, AT59C22, AT59C13 CAT35C102, CAT35C104, CAT35C108 93C06A ,93C46X,93C56,93C66,93C76,93C86 (NS)

7.PIC embedded MCU

Without 40Pin adaptor: 16C84, 16F84, 16F84A ,16F627,16F628,16F627A,16F628A,16F648A 16F818,16F819 12C508/A, 12C509/A, 12CE518, 12CE519, 16C505 16C620 16C621, 16C622, 16CE623, 16CE624, 16CE625, 16C710/711 16F630,16F676 With 40Pin adaptor: 16F870,16F871,16F872,16F873,16F874,16F874,16F876,16F877,16F873A,16F874A,16F876A,16F877A

with PIC embedded 16F871,16F874,16F877, 16F870,16F872,16F873,16F876 MCU adapter:

8.SPI EEPROM

Atmel:AT25010,020, 040 (A8-A0) AT25080, 160, 320, 640, 128, 256 (A15-A0) ST:W95010....256, Microchip 25x010 - 25x640 25010,25020,25040 25C080,25C160,25C320,25C640,25C128,25C256,25C512 AT25HP256,AT25HP512 AT25HP1024 CAT64LCxxx (16 Data I/O) CAT64LC010, CAT64LC020, CAT64LC040

9.Test SRAM,Lossless SRAM Function

DS1220,DS1225Y, DS1230Y/AB, DS1245Y/AB, DS1249Y/AB 6116, 6264, 62256, 62512, 628128

Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

-5-

10. Atmel MCU with AtmelAT89 adapter

89 series: Atmel:AT89C51,52,55, AT89LV51,52,55 AT89S8252 (8K+2K), AT89S53, AT89LS8252,AT89LS53 AT89C1051,AT89C2051,AT89C4051 (20pin) AT89C51RC (32KB), AT89C55WD (6.2V) SST89C54/58, SI89C52 Intel:i87C51, i87C51FA, i87C51FB i8xC51,i8xC52,i8xC54,i8xC58 90 series: AT90S1200,AT90S2313 with AVR DIP40 adapter: AT90S8515 ,AT90S4414, ,AT90S4434, AT90S8535

11. Atmel MCU with AVR DIP28 adapter: AT90S2333,AT90S4433

with Atmel AT89 PLCC44 adapter:

P8048AH, P8049AH,P8050AH, P8042AH (Vea = 12V) P8041, P8042 OTP (read//Progam) P8748,P8749H,P8742H(Vea = 18V) EPROM (read//Progam) D8748,D8749,D8742,D8741, D8742(Vea = 18V)

This multi-function programmer enhanced version has build-in FWH/LPC,PLCC32,P28F002BC adaptor, no need to buy additional adaptor, it directly s Intel810,815,845 main board N82802AB,SST49LF002,SST49LF004 and 3.3V MCU...

Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

-6-

三、Installation and system settings

1、Hardware structure introduced ： ①Socket ZIF：Series 27, Series 28, Series 29, 39/49 series

BIOS chip and chip PLCC

conversion of the Series Block, ATMEL 89 MCU conversion blocks. ②Parallel：By cable Connected to the computer parallel port. ③④⑤⑥DIP socket： 24 series, PIC MCU chip, 25 series, 93 series of memory; ATMEL

AVR MCU chip conversion Block, PHILIPS MCU chip conversion blocks . ⑦Outlet：Used to connect power adapter. 8 DIP switch：在对 Series 27, Series 28, Series 29, 39/49 series BIOS chips, such as ○

reading and writing before the operation, the need for this switch to the appropriate location. Specific location of the light displ ay software. 9 Jumper：A small number of special chips, need to adjust jumper. (Jumper specific ○

method detailed in the first three jumper settings or software display)

10 LED：Green ○

LED that the programmer power state, said red LED chip Vpp power state,

yellow LED chip programming that state. 2、Hardware Installation:

Installation steps are as follows: 1, shut down the computer power supply. 2, the end of the cable into the parallel port on the computer. Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

-7-

3, at the other end of the cable into the programming of the 25-hole outlet. Note: The cable is directional, will not be able to insert anti -inserted. 4, USB cable into the computer on one end, the other end inserted on the programmer. 5, J10 short jumper to end VUSB. At this time programming for the green power light should be lit, that the programmer has been connected to power. Hardware connecting finished. Note: 1, the computer's parallel port to the BIOS settings for the E or E + EPP; 2, the programmer to use the on-line cable is dedicated, can not be used for other equipment, can not replace the other cables. 3、Software installation:

Operation of setup.exe with a floppy disk installation process, will appear on the screen to install the screen: Click on the installation of "Next" button, select the default order on it, will be the programmer's control procedures installed in C: \ Program Files \, and on the desktop-generated programming for the shortcut Icon, double-click the shortcut icon, you can run the programmer-control procedures. 5、Hardware detection:

Launch control procedures, the procedures in the menu bar of the "Help" item, click on "test hardware" items. If normal, a "Hardware present" tips. If not connect power or right, there will be "hardware error: check power & conn ection" of the tips, then you have to check carefully whether the programmer and computer connections, and power is normal.

四、The programming instructions for use

Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

-81、the menu bar:

The procedure screen, the first of the menu bar, the meaning is as follows: file ： Open, save and exit . edit ：Edit the data in the cache. device ：Choose chips. action ：Read; programming / testing; validity testing and empty check; erase; reader

configuration bit; programming targeted largest chip signature. help ：Help text. 2、Sidebar:

（Left to right in the order ） 1、Open the file 2、Save the file 3、Clear the cache of data 4、Read out the data in the chip and saved to the cache 5、Validation Program Data 6、Chip blank check 7、Read Electronic ID 8、Read LockBit 9、Corresponding hardware version PCB5.0C 10、Program Chip 11、Erase chip

3、Window select button:

Device：Programming window. All the programming operation, are carried out under this

window. Buffer： Data Buffer Test H/W：Programming Test

4、The status bar

五、BIOS chip programming Steps： 1, manually select chip models; 2, in accordance with procedures showed that the DIP switch settings diagram, set up DIP switches and other jumpers; 3, chip demand placed on diagram; 4, click the write button, to write the chip. Write an intel 82802AB chip as an example:

Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

-91、Chip select and set up:

First models to choose chips, Two ways: 1, the menu bar "device" option to choose 2, chips selected area, press the select button chip choice (Figure circle in the box that chip select button). Chip parameters： Size&checksum：Chip capacity and data validation of the

buffer. Shift&pattem adress ： Chip address range and the

highest addresses. tWP：Write pulse width tWC：Write delay time. 2、DIP switch settings：

According to the plans in the state of DIP switches, the programmer DIP switch settings. 3、Chips in: Switch set up to determine chip position. The BIOS chip, 32 feet on the ZIP in the socket. Special type of chip, the need to use the corresponding conversion, with the choice of intel82802AB chip, suggesting that we need to FWH / LPC conversion Block, as required, the chip FWH / LPC conversion blocks. Insert, attention should be paid the same direction. Dual-inline package insert ZIP chip socket, is the direction, the gap between the chip upward direction; Note: 1, procedures are displayed parameters of the chip, if there is no special circumstances, does not require adjustment. 2, different chips, switch different settings. 3, launched after the driver, select a good chip models, the chip can plug into the programmer. 4, EPROM chips, need to adjust jumper, according to the specific procedures can be prompted to adjust. 4、 read the chip content and programming: ① read out the chips in: Chip and choose the correct place, you can click on the toolbar "read" button and read out the content of chips. Read out the contents stored in the buffer zone, if the data in the buffer zone will cover these data, you can click on the following procedures screen "buffer" items, dragging the rolling of the buffer zone to view the data. Read the chip procedures in the process of programming on a bright yellow light that has been working with chip voltage. ② programming chips: Choose the right place and type of chip, click on the Toolbar's "open file" button, Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

- 10 -

to write the document read to the buffer zone. The document ca n be ed from the Internet you upgrade the document, you also can be saved before the backup files. Then, click on the toolbar "program" button, the data into the buffer chip. Note that some chip can be written into the air, you can use the "erase" function chips erased the contents, then the use of "air check" to detect whether the chip is empty. After the program, the program will automatically check into the data. In the chip programmed in the process of bright yellow light if the chip also needs Vpp programming voltage, the red indicator light will be bright . 5、Copy chips:

First choice of chip types, and then plug in the original chip, the use of "read" the original function read out the data chip, chip and then put on target, the use of "programming" function can be written into the data. Note: 1, if the wrong choice of models chips, or into the wrong position may burn chips. 2, some chips, such as SST39SF020 chips, need to be erased, in order to properly write. 3, some chips, the choice of models, the process will remind you that in the chip programming, to U cooling process, virus detection procedures for the closure, so as not to affect the right into the chip. 4, drivers occupy less on system resources, in the chip operation in the process of opening another window for other operations. The following is the content of programming on the chip and a set of parameters for advanced s, we can use the following operation, if the chip normal programming, not to carry out the following adjustments to the primary s, and do not adjust the following parameters. R / C delay time: adjustment programming pulse delay. If your computer speed, the programmer is not working properly, could be delayed for a point value. Skip Write 0xFF: choice of programming when it is FF Skip content of bytes. Fast Programming: choice is not fast programming. Printer Port: choice of programming-connect the parallel port. Is usually LPT1 (0X378). Offset: Programming began setting the address. Check Type: CRC can choose 32 or 16 cumulative manner.

六、EPROM chip programming operation EPROM chips on the operation, and common BIOS chip similar, the main difference is that the programming on a jumper to make the appropriate settings. Below us to write a 27 C16 (programming voltage of 12.5 V) chip for example, tell us specific instructions: 1、 Select chip and the setting up of:

Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

- 11 -

Press the "chip select button" option corresponding to the chip models. DIP switch procedure shows that the adjustment diagram, as shown, can be seen from the map, EPROM

chips, DIP switch settings and Flash ROM chip is different. Control this map, the programmer on the DIP switch settings. For EPROM chips, ZIP socket jumper right of the location, have also changed, according to the procedures for prompt, and make the appropriate adjustments. Some of the programming voltage chips higher, at this time, the program wi ll prompt you adjust programming for the right edge of the two jumpers, to get a higher Vpp programming voltage. Specific operations, according to procedures set up to the tips. The two jumpers, should not be adjusted at will, or will cause irreparable con sequences chip.

2、Determine the location of chips:

DIP switches set up, and then determine the location of chips. Chip to 32 feet on the ZIP socket, the direction of chip gap, the same is upward. Capacity of less than 1 M chip, the pin number less than 32 feet, chips at the bottom, ZIP placed at the bottom of the socket.

3、Programming:

According to read data files, programming can be. Programming with a red indicator light, said the programmer has provided the corresponding programming voltage Vpp. Note: If you choose the wrong type chips, jumper settings error into the wrong position or may burn EPROM chips. Other detailed information, please visit the Web site: www.ischip.cn

Website:

www.ischip.cn

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

- 12 Common motherboard chip models:

Manufacturers

Model

AMD

ASD

Atmel

CATALYST

Intel

Macronix

Mosel-Vitelic

SST

SGS－THOMSON

Winbond

Website:

www.ischip.cn

Memory

VPP

Am29F010

1M

Am29F002

2M

Am29F040

4M

Am28F010（A）

1M

VPP=12.0 V

Am28F020（A）

2M

VPP=12.0 V

Am28F040

4M

VPP=12.0 V

AE29F010A

1M

AE29F020

2M

AE29F040

4M

AE29F1008

1M

AE29F2008

2M

AT29C010A

1M

AT29C020

2M

AT29C040

4M

AT49F001

1M

AT49F002

2M

AT49F004

4M

CAT28F001BX-T/B

1M

VPP=12.0 V

CAT28F010

1M

VPP=12.0 V

CAT28F020

2M

VPP=12.0 V

i28F001BX-T/B

1M

VPP=12.0 V

i28F010

1M

VPP=12.0 V

i28F020

2M

VPP=12.0 V

MX28F1000P

1M

VPP=12.0 V

MX28F2000P/T

2M

VPP=12.0 V

MX29F001(N)T/B

1M

MX29F002(N)T/B

2M

F／V29C51001T/B

1M

F／V29C51002T/B

2M

PH29EE010

1M

PH29EE020

2M

PH28SF040

4M

PH39SF010

1M

PH39SF020

2M

M28F256(A)

256K

VPP=12.0 V

M28F512

512K

VPP=12.0 V

M28F001

1M

VPP=12.0 V

M29F002T／NT／B

2M

W29EE011

1M

W29C010

1M

W29C020

2M

W29C040

4M

Email: [email protected]

Willem EPROM Programmer PCB5.0C Manual

- 13 Chip substitution of knowledge:

BIOS chips above the logo in two strings, such as: Am29F010 AT29C020, and the number of chips in front of the type related to 28 series of EEPROM chip; figures beh ind the string with the size of the memory chips, such as that of its 010,001 1 M for the chips, 020,002 note is 2 M chips; 1 M chip into the BIOS file for the length of 128 K, 2M chips for the 256 K. Chip substitution principle is: as long as memory size , the same package, you can substitute, chip manufacturers and types can be ignored. However, the use of 28 series of chips (such as 29 series to replace the chip, because the two different programming voltage, so you can use, but not on the motherboard programming, such as the need to upgrade BIOS, can be programmed). For example: We can use a substitution AT29C020 chip on the motherboard original SST39SF020 or W29C020 chip; AT29C010 with a chip on the motherboard replacement of the original SST29EE010 or W29EE011 chip.

Website:

www.ischip.cn

Email: [email protected]