252812643-illustrated-parts-manual-mark-andy-2200.pdf 2p5z3f

MarkAndy Illustrated Parts Manual

Sold To Customer: Sumiflex, C.A. Ship To Customer: Sumiflex, C.A. Date Shipped: March 10, 2011 Serial: 1439791 Information: Mark Andy, INC. 18081 Chesterfield Airport Road P.O. Box 1023 Chesterfield, MO 63006-1023 USA 636-532-4433 or 1-800-700-6275 (800-700-MARK) Fax 636.532.1510 (Sales) or 636.532.4701 (Customer Service) www.markandy.com

Table Of Contents ____________________________________________________________________________________________________________________________________________________________

Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc#

1 2 3 4 14 24 33 42 43 44 45 46 47 48 50 51 52 54 57 59 61 63 65 67 81 83 85 87 89 91

1439791 1439791*1*1*8 1439791*1*1*18 1439791*1*1*38 1439791*1*1*61 1439791*1*1*90 1439791*1*1*104 1439791*1*1*126 1439791*1*1*141 1439791*1*1*164 1439791*1*1*167 1439791*1*1*170 1439791*1*1*182 DWG052098 1439791*1*1*224 1439791*1*1*230 1439791*1*1*245 021099 021107 031537 031545 031566 031570 031620 031621 031622-1 031636 051339-1 051456 051677

Mark Andy 2200-10 Converting System Unwind Module Consisting of the Following; Mark Andy 2200-10 Unwind Basic Module Print Station Module Consisting of the Following; Mark Andy 2200-10 Print Station Basic Module Diecut Module Consisting of the Following; Mark Andy 2200-10 Diecut Basic Module Master Control/Sheeting Module Consisting of the Following; Mark Andy 2200-10 Master Control Basic Module Master Control Configured Module Consisting of the Following: Rewind Module Consisting of the Following; Mark Andy 2200-10 Rewind Basic Module Web Viewing Options Consisting of the Following; Use Drawing 052098 With This Bill Power Pack Module Consisting of the Following: Power Pack Basic Module Consisting of the following; Dryer System Consisting of the Following; Schematic, Pneumatic Main Press 2200H Cable Layout Diagram, Rear Power Enclosure 2200H Diagram, Electrical Connection 2200H All Voltages Connection Diagram Print Station Control Diagram, Wiring Unwind Rear Control Enclosure Diagram, Wiring E-Stop Rope Module Diagram, Schematic Main Press 208V Ac To 480V Ac 2200H Diagram, Schematic 20KW Dryer 208V Ac to 480V Ac Connection Diagram, 20KW Dryer 208-230VAC Diagram, Wiring Dancer Sensor Replacement Manual Registry, 10 Inch Machine ASM, TIE PLATE 2300 D/C Air Regulator, 0 to 120 Psi

____________________________________________________________________________________________________________________________________________________________

Table of Contents


Doc# 93

052098-10S001

Doc# Doc# Doc# Doc#

94 96 98 100

052189 052198 052305-3 052422-10

Doc# Doc# Doc# Doc#

102 104 106 108

052426-10 052468-210 052627-210 052752-10

Doc# 110

052771-210

Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc#

112 114 116 118 121 123 125 127 129 131 135 137

052773-1 052775-10 052778 052781 052783 052785-10 052790-10 052797 052798-10 052799 052799-3 052809-10

Doc# Doc# Doc# Doc# Doc#

139 141 143 146 148

052824 052826 052829 052834 052852

Vision System, BST Promark, Powerscope 4000 Motorized, with 17 Inch Monito Cord Grip, Multiple Gland, 10 Positions ASM, MN AIR REG XP5000 Turnbuckle Assembly Idler Roll, 3 Inch D, 11.00 Inch Length, Shot Peened, with Shoulder Bolt Idler Roll, 2.187 Inch D, With Removable S Wrap Adjustable 2 Inch Stripping Roll and Arm Unwind Dancer, Vertical, 10 Inch Machine Idler Roll, 3 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Web Guide, North American, Standard Materials, Infrared Sensor, W/Tape Disp Unwind Air Brake, Infeed Pacing Unwind Infeed Pacing Roll, with Bearings Cover, Rear, Unwind, Cantilevered Unwind Frame, Cantilevered, 40 Inch Capacity Gear Box, Driveline, Print Station Slide, Ink Drawer Idler Roll, Dancer Bearing Block Components, Front and Rear, Base Roll, 2.5 Inch Slot Lock, Ink Drawer Front Doors, Interlocked 2 Slot Diecut, Clear Front Doors, Interlocked, Master Control, Clear Idler Roll, 2 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Cover, Rear, Plate Roll Throw Off Drive Line, Print Station to Print Station Rear Cover W/Door, 2-Slot Diecut Nip Guard Guard, Sheet Metal, Front Die Slot

____________________________________________________________________________________________________________________________________________________________

Table of Contents


Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc#

150 152 154 156 158 160 162 164 166 168 170 172 174 176 178 180 182 184 187 189 191 193 195 197 199 201 204 206 208 210 212 214

052856 052859 052868-10 052876-10 052907 052913 052952-110 052967 052968 052986 053061 053079-1 053079-5 053079-6 053079-8 053101-3 053102-1 053105 053110 053114-10 053118-1 053119-1 053120 053123 053129-10 053163-10 053182-10 053191 053241 053272-210 053275-210 053342-10

Guard, Sheet Metal, Rear Die Slot E-Stop Rope Mounting Components Guard, Sliding, Master Control, 4 Inch Base Roll Guard, Sliding, Diecut Module Driveline, Diecut To Master Control W/ MA Gear Box Cartridge, Front & Rear, for Impression Roll Manual Registry 10 Inch Machine Adjusting Arm Housing, Front Adjusting Arm Housing, Rear Drive Line, 2 Slot Diecut Cover, Rear, Printstation , Door Track, 2-Slot Diecut to Sheeting Station , Door Track, Print Station To Print Station , Door Track, Print Station to 2-Slot Diecut , Door Track, Unwind To Print Station Turnbuckle W/Mounting Blocks Drive Components, Rewind, 1HP, Cantilevered for Upper or Lower Covers, Rear, Master Control Rewind Covers, Lower, Single Cantilevered Guarding, Diecut Module, 2 Slot Main Drive Motor, 10 Hp 208-240V Driveline, Master Control & Sheeting Module W/MA Gear Box, 10 Hp Riser Block, 2 Inch Tall, w/Bolts, for 2.5 Slot Drive Line, Print Station to Diecut Unwind Frame, Infeed Pacing, Dancer Guarding, Master Control Module Frames, Dual Print Station End Cover and Regulator, Unwind Cover, Rear, Unwind Infeed Pacing Nip Roll, Air, 50 Durometer, Exit Pacing Nip Roll, Air, 50 Durometer, Pacing Guard, Pinch Point, Print Station

____________________________________________________________________________________________________________________________________________________________

Table of Contents


Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc#

216 218 220 224 226 228 230 232 234 237 239 241 243 245 247 249 251 254 256 259 261 263 266 269 271 273 275 277 279 281 283 285

053491 053548 061815 062365-01 062448-04 062562-10 062652-P02 062734-10 062849-1 062850-1 062918-210-P02 063048-1 063048-10-P04 063048-110-P04 063060-10 063071-10 063083-10 063084-10 063139 063152-10 063157-10 063172 063195 063206-10-P02 063241-10 063939-10 063977-2 063991 064079-10 064098-1-P02 064098-900-P02 064103-01-P02

Dancer Pot Assembly Position Continuous Motor, with Clutch Gear ASM, GR A/R 1/2SPD STD P/S HELICAL-HG ASM, RESISTOR DRV DYB 6.80 OHM 2400W ASM, CNTCTR W/SUP 3PH 600VAC 65A IND 80A RES COIL 110VAC 50/60HZ ASM, I/F PAC/RL W/BRNGS 10"MACH ASM, W/W/U C/P 2200G SYMBOL Doctor Blade Holder, W/4 Blades ASM, GR/BX W/O UPR LFT LEG W/REG ASM, GR/BX W/O UPR LFT LEG W/PULLEY Dancer Arm and Pivot Shaft, Unwind, 10 Inch Machine Machine , Rewind, Cantilevered Machined Machined , Unwind, Cantilevered Ink Station, Slide Out Cassette Ink Fountain, Spacer and Latch Ink Station, Basic Machine , Master Control Module Gear Box Assembly W/O Upper Right Leg, W/Registry Rewind Frames, Lower Single Cantilevered, 40 Inch Capacity Tractor, Hold Down, 2-1/2 Slot Master Station, Control Main Power Pack, Inverter Drive and Controls, for All Voltages Straddle Block, W/Die Pressure Screws for 2.5 Slot, 10 Inch Frames, Master Control & Sheeting Module Frames, Diecut, 2 Slot, 2-1/2 Inch, 10 Inch Machine Control , Unwind, Air Brake Infeed Pacing Control , Print Station Waste Windup, 32 Inch Capacity Dryer, 20KW 208VAC KIT, DRYER Power Pack, Dryer Disconnect and Controls 208-240Vac 20KW

____________________________________________________________________________________________________________________________________________________________

Table of Contents


Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc# Doc#

287 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304

091148 1439791*1*1*104 1439791*1*1*126 1439791*1*1*141 1439791*1*1*164 1439791*1*1*167 1439791*1*1*170 1439791*1*1*18 1439791*1*1*182 1439791*1*1*224 1439791*1*1*230 1439791*1*1*245 1439791*1*1*38 1439791*1*1*61 1439791*1*1*8 1439791*1*1*90 521022-7

Doc# 306 Doc# 308

530695-10 550269-1

Doc# 310 Doc# 312

560182-2 581052-10

Doc# 314

581054-10

Doc# Doc# Doc# Doc#

971223 971225 974662 975114-1

316 317 318 320

Doc# 321

975253-310

Label, Print Station Control Mark Andy 2200-10 Diecut Basic Module Master Control/Sheeting Module Consisting of the Following; Mark Andy 2200-10 Master Control Basic Module Master Control Configured Module Consisting of the Following: Rewind Module Consisting of the Following; Mark Andy 2200-10 Rewind Basic Module Mark Andy 2200-10 Unwind Basic Module Web Viewing Options Consisting of the Following; Power Pack Module Consisting of the Following: Power Pack Basic Module Consisting of the following; Dryer System Consisting of the Following; Print Station Module Consisting of the Following; Mark Andy 2200-10 Print Station Basic Module Unwind Module Consisting of the Following; Diecut Module Consisting of the Following; Impression Roll, 10 Inch, 3 Inch D, Thru Hardened, W 1/8 Helical Drive G Plate Roll Pin, 1/2 Inch D Meter Roll Assembly, 10 Inch, 65 Durometer Roll, Undersized, Includes Beari KIT, IDL/RL 10"MACH3"D SHOT PEENED Base Roll W/ 1/8 Gear, Master Control & Sheeting Module, 4 Inch D, .015 Base Roll W/ 1/8 Gear, 4 Inch D, For Diecut Module, Fixed Position Gear, Drive, For Meter Roll, 1/2 Speed Gear with Bearings, For Anilox Roll, 1/2 Speed KIT, REPAIR SNGL FLEX Controller, Unwind Brake, Proportional Derivative, with Specification Shee Kit, UVT Shields & Brackets, Final Print

____________________________________________________________________________________________________________________________________________________________

Table of Contents


Doc# Doc# Doc# Doc# Doc# Doc#

323 324 325 326 328 330

Doc# 331 Doc# 332

975254-110S 975318 975360 975565-10 975614-10-P02 975932-10 97M106-2 DWG052098

UV Shields and Idlers, For Final Print Station, Spanish Drive Gear and Key, 1/8, for Driveline W/MA Gear Box Kit, Dryer Interface For Multiple Units Heat Tunnels, Latches & Hardware Waste Windup, 32 Inch Capacity Kit, Electrical Components, For Power Pack, Yaskawa F7, 10HP Main Drive 208 Dryer Package Components, DS1000A Use Drawing 052098 With This Bill

____________________________________________________________________________________________________________________________________________________________

Table of Contents

Serial# 1439791

Mark Andy 2200-10 Converting System

DOC# SEQ# QTY ITEM DESCRIPTION __________________________________________________________________________________________________________________________________________________________________

0 2 15

1 SNOTE006

17

1 SNOTE016

19 20

1 SPI220159 1 SPI220160

23

28 51 100 500 1000 1500

1 SNOTE P/S 1/8 HELICAL PRIMAR 1 NOTE SPANISH 1 SNOTE D/C 1/8 SPUR PRIMARY 1 SPI220028 1 SNOTE S/S 1/8 SPUR PRIMARY 1 SPI220175 1 OPT2200XL-10 1 1439791*1*1*8 3 1439791*1*1*38 1 1439791*1*1*90 1 1439791*1*1*126

2500 3500 5000 5001

1 1 1 1

24 25 25 26

1

1 I SERIES 2200 PRESS 1 SPIUVT0002

1439791*1*1*167 1439791*1*1*182 P59432-10 974499-2

I SERIES 2200 PRESS MODEL Maxim Cassette (400 Watt/Inch) with UVT SLS UV power system, includes light shields Press substrate range as configured is 2 pt (50 micron) - 12 pt (305 micron). Maximum attainable press speed is dependent on the application. Several factors ca Electrical Spare Parts Package Mechanical Spare Parts Package for Mechanical Line Shaft Driven Presses with Slide Print Stations have primary 1/8 Helical Gearing. Supplied with Spanish Manuals Diecut Station(s) have primary 1/8 Spur Gearing. International Wood Crating Fee Sheeting Station has primary 1/8 Spur Gearing. Press Shipment Kit XL Option Package Unwind Module Consisting of the Following; Print Station Module Consisting of the Following; Diecut Module Consisting of the Following; Master Control/Sheeting Module Consisting of the Following; Rewind Module Consisting of the Following; Web Viewing Options Consisting of the Following; Complimentary Sample Kit, 10 Inch Width Press Shipment Kit, International, 2200

____________________________________________________________________________________________________________________________________________________________ DOC#

SEQ#

QTY

ITEM

DESCRIPTION

Serial# 1439791

Mark Andy 2200-10 Converting System Doc#: 1

Serial# 1439791



54

141 197 158 178 176 172 174 321 323

5002 5002

1 053116-1S 1 053116-4S

5002 5002 5002 5040 5041

1 1 3 1 1

5042 5045 5045

1 975666-1S 1 021099 1 031699

5090 5093 5094 5095 5096 5098 5099 5100 5104 7001 7002 7003

1 2 1 1 1 1 1 1 2 1 1 1

CRATING2200H-10 052826 826587-P02 053123 052907 053079-8 053079-6 053079-1 053079-5 975253-310 975254-110S 901193-102

7004 7008 7500 8000 9007

1 1 1 1 1

P03513-106 P61032-S 1439791*1*1*224 1439791*1*1*245 NOTE WASTE WINDUP DIECUT

053116-3S 053116-5S 053116-2S 975257 975291-100

Warning Labels for 2200H Unwind Spanish Warning Labels for 2200H Master Station and Power Pack Spanish Warning Labels for 2200H Die Cut Spanish Warning Labels for 2200H Rewind Spanish Warning Labels for 2200H Print Station Spanish Spare Parts Kit Electrical Spare Parts Kit Mechanical, 10 Inch Machine, For 1/8 Helical Drive and Slide Out Manual Operational 2200 10",13"&17" Spanish Schematic, Pneumatic Main Press 2200H Schematic Main Press 2200H 208-240V Ac With Yaskawa Main Drive Crating, International Press Drive Line, Print Station to Print Station End Plate, Front Door Drive Line, Print Station to Diecut Driveline, Diecut To Master Control W/ MA Gear Box , Door Track, Unwind To Print Station , Door Track, Print Station to 2-Slot Diecut , Door Track, 2-Slot Diecut to Sheeting Station , Door Track, Print Station To Print Station Kit, UVT Shields & Brackets, Final Print UV Shields and Idlers, For Final Print Station, Spanish Programmed, Touch Screen Operator, UVT Single Lamp System (SLS), English and Spanis UV System, UVT, Maxim Single Lamp System, 400w 208/60 Manual, UVT, UV Maxim Single Lamp System, Spanish Power Pack Module Consisting of the Following: Dryer System Consisting of the Following; Waste Windup Diecut Option

____________________________________________________________________________________________________________________________________________________________ DOC#

SEQ#

QTY

ITEM

DESCRIPTION

Serial# 1439791


Serial# 1439791



9012 9014 9021 9950

1 1 1 1

NOTE NOTE NOTE NOTE

HOT AIR VISION SYSTEM UV UVT VOLTAGE 208

Hot Air Option Vision System Option UV UVT Option This is a 208 Volt, 60 Hz System

____________________________________________________________________________________________________________________________________________________________ DOC#

SEQ#

QTY

ITEM

DESCRIPTION

Serial# 1439791


ASSEMBLY: 1439791*1*1*8

Unwind Module Consisting of the Following;

SEQ# QTY ITEM DESCRIPTION __________________________________________________________________________________________________________________________________________________________________

0 1 3 100 101 102 104 111

1 DWG_AT2200-I-UW 1 SPI220007 1 1 1 1 1 4

SPI220168 1439791*1*1*18 053241 052778 975239-S 315224

Use Drawing AT2200-I-UW for this Bill of Material Cantilevered Unwind Module with 40 Inch Capacity, Vertical Dancer, and Web Guide Open Loop Infeed Pacing System Mark Andy 2200-10 Unwind Basic Module Cover, Rear, Unwind Infeed Pacing Cover, Rear, Unwind, Cantilevered Manual, Simplex Web Guide, H6420/21, Spanish Leveling Pad, 1/2 Inch Thick

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*8

DESCRIPTION

Unwind Module Consisting of the Following; Doc#: 302 2

ASSEMBLY: 1439791*1*1*18

Mark Andy 2200-10 Unwind Basic Module


0 200 201 204 205

1 1 1 1 6

DWG_AT2200-I-UW 053129-10 052781 510323-10C 052752-10

206

1 052771-210

207 208 208 209 210 213 215 216 217 218 219 291

1 1 1 1 1 1 2 2 1 1 1 2

052627-210 052775-10 NOTE INFEED PACING 053275-210 052773-1 053191 052787 051677 063977-2 090357-P01 090699 P41421

Use Drawing AT2200-I-UW for this Bill of Material Unwind Frame, Infeed Pacing, Dancer Unwind Frame, Cantilevered, 40 Inch Capacity Coreholder, Cantilevered, 3 Inch Idler Roll, 3 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Web Guide, North American, Standard Materials, Infrared Sensor, W/Tape Dispenser Unwind Dancer, Vertical, 10 Inch Machine Unwind Infeed Pacing Roll, with Bearings Infeed Pacing Control System Nip Roll, Air, 50 Durometer, Pacing Unwind Air Brake, Infeed Pacing End Cover and Regulator, Unwind E-Stop Bracket, Rope Mountng, with Screws Air Regulator, 0 to 120 Psi Control , Unwind, Air Brake Infeed Pacing Label, Nameplate, 2200 Label, Symbol Unwind Coreholder Tee Union 3/8", 1/4",3/8"

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*18

DESCRIPTION

Mark Andy 2200-10 Unwind Basic Module Doc#: 295 3

ASSEMBLY: 1439791*1*1*38

Print Station Module Consisting of the Following;


0 2 4

1 DWG_AT2200-I-PS 2 SPI220082 1 SPI220025

7 8 9

2 SPI220010 2 SPI220011 2 SPI220026

15 21 500 501 502 503 504 505 506 507 508 509 510

2 2 1 2 1 1 2 1 1 2 2 2 2

SPI220106 SPI220021 1439791*1*1*61 315224 053061 052824 090690 090694 090691 062734-10 971225 971223 550269-1

512

2 RX_CERAMIC_10

Drawing, Module, Print Station Ceramic Anilox Roll - Praxair Double Print Station Module, with Slide Out Style Ink Station Cassette Anilox Gears & Bearings - Half Speed Doctor Blade Holder with 4 Blades Undersized Meter Rolls (65 Durometer) with Bearings and Adjustment Arms Through Hardened Impression Rolls Hot Air Dryer Tunnel Mark Andy 2200-10 Print Station Basic Module Leveling Pad, 1/2 Inch Thick Cover, Rear, Printstation Cover, Rear, Plate Roll Throw Off Label, Symbol Registry Label, Symbol Dryer Outlet Hot Air, White on Black Label, Symbol Vacuum, White on Black Doctor Blade Holder, W/4 Blades Gear with Bearings, For Anilox Roll, 1/2 Speed Gear, Drive, For Meter Roll, 1/2 Speed Meter Roll Assembly, 10 Inch, 65 Durometer Roll, Undersized, Includes Bearings a Ceramic Anilox Roll Coupon, Praxair, 10"

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*38

DESCRIPTION

Print Station Module Consisting of the Following; Doc#: 300 4

4/11/11 8:38:42 AM - IPB - 1439791 doc#5 - Do Not Scale









ASSEMBLY: 1439791*1*1*61

Mark Andy 2200-10 Print Station Basic Module


0 600 601 602 603 604 605 606 607 608 609 610 611 613 614

1 1 1 2 2 2 2 2 2 2 1 2 2 8 4

DWG_AT2200-I-PS 063991 053182-10 052967 052968 053263-10 053342-10 053548 052798-10 052783 052826 052913 052952-110 600158 052752-10

615 616

2 530695-10 2 521022-7

617

2 110803-HG

618 618 619 620 627 900 900 901

2 1 2 2 2 1 1 2

052785-10 NOTE SLIDE IN INK DRAWER 063060-10 052787 P41421 975565-10 NOTE HOT AIR 810877-10-P02

Drawing, Module, Print Station Control , Print Station Frames, Dual Print Station Adjusting Arm Housing, Front Adjusting Arm Housing, Rear Plate Roll Throw Off, W/Stop Guard, Pinch Point, Print Station Continuous Motor, with Clutch Gear Lock, Ink Drawer Gear Box, Driveline, Print Station Drive Line, Print Station to Print Station Cartridge, Front & Rear, for Impression Roll Manual Registry 10 Inch Machine Spacer, 3.5 Inch Length, Tapped, Idler Roll, 3 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Plate Roll Pin, 1/2 Inch D Impression Roll, 10 Inch, 3 Inch D, Thru Hardened, W 1/8 Helical Drive Gear Gear, Helical, Drive, 73 Tooth 3/4 Bore, 1/8 20 Degree Pressure Angle Slide, Ink Drawer XL Style Slide In Print Station Cassette Ink Station, Slide Out Cassette E-Stop Bracket, Rope Mountng, with Screws Tee Union 3/8", 1/4",3/8" Heat Tunnels, Latches & Hardware Hot Air Option Top Snoot, Heat Tunnel

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*61

DESCRIPTION

Mark Andy 2200-10 Print Station Basic Module Doc#: 301 14










ASSEMBLY: 1439791*1*1*90

Diecut Module Consisting of the Following;

SEQ# QTY ITEM DESCRIPTION ______________________________________________________________________________________________________________________________________________________________

0 10 14 24 1000 1000 1001 1002 1005 1010 1041

1 DWG_AT2200-I-DC_2S 1 SPI220012 1 1 2 1 2 1 1 1 2

SPI220023 SPI220166 063157-10 1439791*1*1*104 315224 052829 975614-10-P02 975241 053004

Drawing, Module, 2-Slot Diecut 2 Station Diecut with Steel Side Frames and 2-1/2 Inch slots, with Top Side Diec 32 Inch Capacity Waste Windup Unit Idler Roll Kit for RD Scorer Web Path and/or Motorized Vision System Tractor, Hold Down, 2-1/2 Slot Mark Andy 2200-10 Diecut Basic Module Leveling Pad, 1/2 Inch Thick Rear Cover W/Door, 2-Slot Diecut Waste Windup, 32 Inch Capacity Driveline Components, For Waste Windup in Diecut Bearing Blocks, Front & Rear, W/ Bronze Bushings, For MA Tooling W/ 1 Inch Journ

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*90

DESCRIPTION

Diecut Module Consisting of the Following; Doc#: 303 24

____









ASSEMBLY: 1439791*1*1*104

Mark Andy 2200-10 Diecut Basic Module


0 1100 1101 1102

1 1 1 1

DWG_AT2200-I-DC_2S 063939-10 052468-210 052422-10

1103 1104

1 052426-10 2 052809-10

1105

4 052752-10

1106 1107 1108 1109 1110

2 1 2 2 2

051339-1 052986 052787 052797 581054-10

1111 1119 1121 1122 1139 1143 1144 1152

1 1 2 1 1 1 2 2

052988 052799 975318 051677 975299-10 053114-10 P41421 063206-10-P02

Drawing, Module, 2-Slot Diecut Frames, Diecut, 2 Slot, 2-1/2 Inch, 10 Inch Machine Adjustable 2 Inch Stripping Roll and Arm Idler Roll, 3 Inch D, 11.00 Inch Length, Shot Peened, with Shoulder Bolt Idler Roll, 2.187 Inch D, With Removable S Wrap Idler Roll, 2 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Idler Roll, 3 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Manual Registry, 10 Inch Machine Drive Line, 2 Slot Diecut E-Stop Bracket, Rope Mountng, with Screws Bearing Block Components, Front and Rear, Base Roll, 2.5 Inch Slot Base Roll W/ 1/8 Gear, 4 Inch D, For Diecut Module, Fixed Position Electrical Components Diecut 2 Slot, Pre Wired Front Doors, Interlocked 2 Slot Diecut, Clear Drive Gear and Key, 1/8, for Driveline W/MA Gear Box Air Regulator, 0 to 120 Psi Idler Kit for RD Scorer/Vision System Guarding, Diecut Module, 2 Slot Tee Union 3/8", 1/4",3/8" Straddle Block, W/Die Pressure Screws for 2.5 Slot, 10 Inch

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 1439791*1*1*104

Mark Andy 2200-10 Diecut Basic Module Doc#: 289 33









ASSEMBLY: 1439791*1*1*126

Master Control/Sheeting Module Consisting of the Following;


0 15

1 DWG_AT2200-I-MC 1 SPI220017

16 17 18

1 SPI220018 1 SPI220019 1 SPI220015

1500 1500 1501 1505 1511 1515 1554

1 1 1 4 1 1 1

053105 1439791*1*1*141 826913-P02 315224 063157-10 975210 053008

1555

1 053004

1579

1 P61045

Drawing, Module, Master Control Master Control Module with Intuitive Touch Screen OIT and Press Controls Sheeting Station with Steel Frames and 2-1/2 Inch Slot Open Loop Exit Pacing System Lateral Side Adjust Bearing Blocks for 1 Inch Diameter Tooling Journals Covers, Rear, Master Control Mark Andy 2200-10 Master Control Basic Module Cover, Sheeting Station, Waste Windup Position Leveling Pad, 1/2 Inch Thick Tractor, Hold Down, 2-1/2 Slot E-Stop Hardware Components Bearing Blocks, Side Adjust W/ Bronze Bushings, 1 Inch Journal, For 2-1/2 Inch S Bearing Blocks, Front & Rear, W/ Bronze Bushings, For MA Tooling W/ 1 Inch Journ Label, Clear Grease Tag

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*126

DESCRIPTION

Master Control/Sheeting Module Consisting of the Following; Doc#: 290 42

ASSEMBLY: 1439791*1*1*141

Mark Andy 2200-10 Master Control Basic Module


0 1501 1600 1601 1602 1603 1606

1 1 1 1 1 1 6

DWG_AT2200-I-MC 1439791*1*1*164 063241-10 053118-1 053119-1 975318 052752-10

1607

1 570898-10

1608 1609 1610

1 053272-210 1 842917-10 1 581052-10

1611 1615 1616 1620 1621 1622 1623 1624 1625 1705 1708

1 1 1 1 2 1 1 1 1 2 1

052797 051339-1 052868-10 052859 052787 052988-2 053163-10 900960-120 052799-3 P41421 063206-10-P02

Drawing, Module, Master Control Master Control Configured Module Consisting of the Following: Frames, Master Control & Sheeting Module Main Drive Motor, 10 Hp 208-240V Driveline, Master Control & Sheeting Module W/MA Gear Box, 10 Hp Drive Gear and Key, 1/8, for Driveline W/MA Gear Box Idler Roll, 3 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Roll, Exit Pacing, W/Shaft & Mounting, High Friction Coated, Smooth, 3.9410/3.94 Nip Roll, Air, 50 Durometer, Exit Pacing Tray, Sheeting 4 Inch Base Roll Base Roll W/ 1/8 Gear, Master Control & Sheeting Module, 4 Inch D, .015 Overs Bearing Block Components, Front and Rear, Base Roll, 2.5 Inch Slot Manual Registry, 10 Inch Machine Guard, Sliding, Master Control, 4 Inch Base Roll E-Stop Rope Mounting Components E-Stop Bracket, Rope Mountng, with Screws Electrical Components, Master, Pre Wired Guarding, Master Control Module Program, View 600 Operator Interface Master Revision 20 Front Doors, Interlocked, Master Control, Clear Tee Union 3/8", 1/4",3/8" Straddle Block, W/Die Pressure Screws for 2.5 Slot, 10 Inch

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*141

DESCRIPTION

Mark Andy 2200-10 Master Control Basic Module Doc#: 291 43

ASSEMBLY: 1439791*1*1*164

Master Control Configured Module Consisting of the Following:


1505

1 063172

Master Station, Control Main

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*164

DESCRIPTION

Master Control Configured Module Consisting of the Following: Doc#: 292 44

ASSEMBLY: 1439791*1*1*167

Rewind Module Consisting of the Following;


0 23 2500 2501 2502 2504

1 DWG_AT2200-I-RW_SINGLE40 1 SPI220024 1 1 1 1

1439791*1*1*170 053110 315224 P32017-1

Drawing, Module, Rewind, Cantilevered, Single 40 Inch Cantilevered Lower Rewind with 40 Inch Capacity and Taper Tension Control Mark Andy 2200-10 Rewind Basic Module Rewind Covers, Lower, Single Cantilevered Leveling Pad, 1/2 Inch Thick Leveling Pad, Vibration Isolation, Load Range 100-900 Pounds, for Machines W/out

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*167

DESCRIPTION

Rewind Module Consisting of the Following; Doc#: 293 45

ASSEMBLY: 1439791*1*1*170

Mark Andy 2200-10 Rewind Basic Module


0 2550 2551 2552 2553

1 1 1 1 1

DWG_AT2200-I-RW_SINGLE40 063152-10 053102-1 510323-10C 053101-3

Drawing, Module, Rewind, Cantilevered, Single 40 Inch Rewind Frames, Lower Single Cantilevered, 40 Inch Capacity Drive Components, Rewind, 1HP, Cantilevered for Upper or Lower Coreholder, Cantilevered, 3 Inch Turnbuckle W/Mounting Blocks

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*170

DESCRIPTION

Mark Andy 2200-10 Rewind Basic Module Doc#: 294 46

ASSEMBLY: 1439791*1*1*182

Web Viewing Options Consisting of the Following;


15 3502

1 SPIOEM0080 1 052098-10S001

BST Powerscope 4000 vision system with motorized traverse Vision System, BST Promark, Powerscope 4000 Motorized, with 17 Inch Monitor, fo

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*182

DESCRIPTION

Web Viewing Options Consisting of the Following; Doc#: 296 47

ASSEMBLY: DWG052098

Use Drawing 052098 With This Bill


1

1 DWG

Drawing and/or Instructions, Request from Printroom

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: DWG052098

DESCRIPTION

Use Drawing 052098 With This Bill Doc#: 332 48


ASSEMBLY: 1439791*1*1*224

Power Pack Module Consisting of the Following:


7501 7501

1 900993-107 1 901190-101

7510 7510 7550

1 SPEC-284 1 SPEC-287 1 1439791*1*1*230

Programmed, Component PowerFlex 70 Rewind Controller 1HP 208-240V Ac Programmed, DeviceNet Scanner Without Motorized Registry 208-240V Ac, Yaskawa F7 Procedure, Emergency Stop and Module Calibration Procedure, Device Net Node Addressing Power Pack Basic Module Consisting of the following;

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*224

DESCRIPTION

Power Pack Module Consisting of the Following: Doc#: 297 50

ASSEMBLY: 1439791*1*1*230

Power Pack Basic Module Consisting of the following;


1 20 7550

1 SPI220174 1 SPI220020 1 975932-10

7557 7560 7561 7561

1 1 1 1

P99005-04 063195 031699 901192-102

7562 7564 7564 7564

1 1 1 1

091141 071363-2 071363-4 071370

10 HP Main Drive Motor Mechanical Line Shaft Drive Unit & Control Kit, Electrical Components, For Power Pack, Yaskawa F7, 10HP Main Drive 208-240V Electrical Components, For Power Pack, 1Hp Rewind Drive 208-240v AC Power Pack, Inverter Drive and Controls, for All Voltages Schematic Main Press 2200H 208-240V Ac With Yaskawa Main Drive Programmed, Micrologix 1500 Central Processor Unit, with Yaskawa F7 Main Drive, Nameplate, Power Cabinets Symbolic with Short Circuit Current Rating Harness, Motor Interface to Ac Controller 8 Awg Shielded 72 Inches Harness, Motor Interface to Ac Controller 12 Awg Shielded 180 Inches Harness, Power Pack Control Wiring

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*230

DESCRIPTION

Power Pack Basic Module Consisting of the following; Doc#: 298 51

ASSEMBLY: 1439791*1*1*245

Dryer System Consisting of the Following;


22 8020 8030 8040

2 1 2 1

SPI220022 052982-7 064098-1-P02 975360

Enhanced Hot Air Drying Package Dryer Manifold W/Hose, 6 Color, 2 Dryers Dryer, 20KW 208VAC Kit, Dryer Interface For Multiple Units

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*245

DESCRIPTION

Dryer System Consisting of the Following; Doc#: 299 52

ASSEMBLIES and SUBASSEMBLIES

ASSEMBLY: 021099

Schematic, Pneumatic Main Press 2200H


1

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 021099

DESCRIPTION

Schematic, Pneumatic Main Press 2200H Doc#: 54


ASSEMBLY: 021107

Cable Layout Diagram, Rear Power Enclosure 2200H


0

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 021107

DESCRIPTION

Cable Layout Diagram, Rear Power Enclosure 2200H Doc#: 57

ASSEMBLY: 031537

Diagram, Electrical Connection 2200H All Voltages


1

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 031537

DESCRIPTION

Diagram, Electrical Connection 2200H All Voltages Doc#: 59

ASSEMBLY: 031545

Connection Diagram Print Station Control


1

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 031545

DESCRIPTION

Connection Diagram Print Station Control Doc#: 61

ASSEMBLY: 031566

Diagram, Wiring Unwind Rear Control Enclosure


1

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 031566

DESCRIPTION

Diagram, Wiring Unwind Rear Control Enclosure Doc#: 63

ASSEMBLY: 031570

Diagram, Wiring E-Stop Rope Module


1

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 031570

DESCRIPTION

Diagram, Wiring E-Stop Rope Module Doc#: 65

ASSEMBLY: 031620

Diagram, Schematic Main Press 208V Ac To 480V Ac 2200H


0

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 031620

DESCRIPTION

Diagram, Schematic Main Press 208V Ac To 480V Ac 2200H Doc#: 67

ASSEMBLY: 031621

Diagram, Schematic 20KW Dryer 208V Ac to 480V Ac


0

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 031621

DESCRIPTION

Diagram, Schematic 20KW Dryer 208V Ac to 480V Ac Doc#: 81

ASSEMBLY: 031622-1

Connection Diagram, 20KW Dryer 208-230VAC


0

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 031622-1

DESCRIPTION

Connection Diagram, 20KW Dryer 208-230VAC Doc#: 83

ASSEMBLY: 031636

Diagram, Wiring Dancer Sensor Replacement


0

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 031636

DESCRIPTION

Diagram, Wiring Dancer Sensor Replacement Doc#: 85

ASSEMBLY: 051339-1

Manual Registry, 10 Inch Machine


1 2 3 4 5 6 7 8 9 10 11 12

1 1 1 1 2 1 1 1 1 2 1 1

P54154 22M180 314680 630550 76M014 77M019-3 P15005 P31005 P53009 P52003 P53004 P55006

PIN, MAN REG 2200 PULLEY, INJ MOLDED GR/BLT 12T L BELT 1/2B BLK, MAN REG SHAFT, REG CNTRL MAN 10"MACH SCW, NYLON TIP SET 10-32X3/8LG KNOB, MAN REG 3/8-16 INSERT GR/BLT, 3/8P 18.75X1/2 COLLAR, 3/8 SCW, CUP PT SOC SET 1/4-28UNRF-3AX.25 WSHR, FLAT FIBERGLASS .380 ID x .630 OD x .032 THK SCW, CUP PT SOC SET 1/4-20UNRC-3AX.187 KEY, SOFT CHAM SQ 1/8X1

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 051339-1

DESCRIPTION

Manual Registry, 10 Inch Machine Doc#: 87


ASSEMBLY: 051456

ASM, TIE PLATE 2300 D/C


1 2 3 4 5

1 1 1 1 6

313680-P02 313681-P02 600577 P50452 P50534

BLK, BLK, PIN, SCW, SCW,

FRM LOCATING TIE 2300 FRM LOC DRAW 2300 TIE LOCKING 2300 SOC HD CAP 1/2-13UNRC-3AX3-1/4 SOC HD CAP 1/2-13UNRC-3AX1

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 051456

ASM, TIE PLATE 2300 D/C Doc#: 89


ASSEMBLY: 051677

Air Regulator, 0 to 120 Psi


1 2 3 4 5 6 7

1 1 1 2 1 2 1

842519-P02 P40073 P40557 P41040 P41014 P50223 P40557-1

Bracket, Regulator, Core Holder Inflator Gauge, Air 160 Pounds Regulator, Air Miniature, 0-125 PSI W/Low ELBOW, MALE 90 M-B 1/4TX1/8NPT PLUG, PIPE HEX SOC 1/8MPT SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK Nut, Mount, For Air Regulator, 1-3/16-18 UNEF-2B

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 051677

Air Regulator, 0 to 120 Psi Doc#: 91


ASSEMBLY: 052098-10S001

Vision System, BST Promark, Powerscope 4000 Motorized, with 17 Inch Monito


0 1 3 5 6 7 8 9 10 11

1 1 2 5 5 5 5 2 2 1

DWG052098 P021382-10 P50035 560182-2 610519-10 P50257 311788 P50161 P50170 312369

Use Drawing 052098 With This Bill Camera, PowerScope 4000, Motorized with Traverse for a 2200-10 SCW, SOC HD CAP 3/8-24UNRF-3AX3/4 KIT, IDL/RL 10"MACH3"D SHOT PEENED SHAFT,IDLER,,0.750 D,14.438 L, SCW, SHOULDER 3/8X3/4 BAR, CLAMP FIXED IDL/RL SCW, SOC HD CAP 1/4-20UNRC-3AX1 SCW, FLAT HD SOC CAP 8-32UNRC-3AX1/2 SPCR, PROX SNSR 2200E H'SCAN

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052098-10S001

DESCRIPTION

Vision System, BST Promark, Powerscope 4000 Motorized, with 17 Inch Monito Doc#: 93

ASSEMBLY: 052189

Cord Grip, Multiple Gland, 10 Positions


1 2 3 4

1 1 6 1

P201388 P201388-1 P201388-06 P201388-11

GRIP, KEL 24/10 10 POS BASE GRIP, KEL 24/10 10POS FRM GRIP, KEL HDC-BTK INSERT BLNK PLUG GROMMET, CBL INSERT LG BLANK HDC-BTK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052189

DESCRIPTION

Cord Grip, Multiple Gland, 10 Positions Doc#: 94


ASSEMBLY: 052198

ASM, MN AIR REG XP5000


2 3 4 5 6 7 8 9 10 11 12

1 P40482 1 1 20 1 1 1 1 2 2 2

KIT, FLTR REGULATOR W/MTL BOWL,SIGHT GA NUT & MNTG BRKT (REF ECO 1234 - RPLCS P4 VALVE, LOCKOUT 1/2"POSITIVE SHUTOFF BSHNG, PIPE 1/2MPTX3/8FPT TUBE, POLYETHYLENE 3/8"ODX1/16WALL COUPLER, MALE PLUG ELBOW, STREET PIPE 3/8FPTX3/8MPT NIPPLE, HEX PIPE 1/2MPTX1/2MPT TEE, 3/8HOSE X 3/8 HOSE X 1/2NPT SCW, SS SOC HD CAP 1/4-20X3/4 WSHR, FLAT PLTD 9/32X5/8X16GA WSHR, SPLIT LCK PLTD 1/4

P40525 P41018 P41024 P41030 P41052 P41378 P41385 P50596 P52030 P52052

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052198

ASM, MN AIR REG XP5000 Doc#: 96


ASSEMBLY: 052305-3

Turnbuckle Assembly


1 2 3 4 5 6

1 1 1 2 1 1

314668-3 P10235 P10236 P50081 P51033 P51108

Bar, Turnbuckle ROD END, W/SPHRCL BRNG .375B 3/8-24 RH CM-6 ROD END, W/SPHRCL BRNG .375B 3/8-24 LH CB-6 SCW, SHOULDER 3/8X1/2 NUT, HEX JAM 3/8-24UNF-2B PLTD NUT, HEX JAM 3/8-24 UNF-2B LH PLTD

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052305-3

Turnbuckle Assembly Doc#: 98


ASSEMBLY: 052422-10

Idler Roll, 3 Inch D, 11.00 Inch Length, Shot Peened, with Shoulder Bolt


1 2 3 4 5 6 8

1 1 1 1 1 2 2

311788 P50183 313240-2 560178-10 610890-10 P31009 P17090-001

BAR, CLAMP FIXED IDL/RL SCW, SHOULDER 3/8X1-1/4 CVR, ST/STL 3INCH IDL/RL IDL/RL, 10"MACH 3"D (LO-MASS) SHOT-PEENED Idler Roll Shaft, 0.750 D, 14.438 L, Corrosion Resistance COLLAR, ALUM 1-1/2ODX3/4IDX1/2W O-RING, NEOPRENE 5/8X13/16X3/32

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052422-10

DESCRIPTION

Idler Roll, 3 Inch D, 11.00 Inch Length, Shot Peened, with Shoulder Bolt Doc#: 100


ASSEMBLY: 052426-10

Idler Roll, 2.187 Inch D, With Removable S Wrap


1 2 3 4 5 6 7

1 1 1 2 1 1 2

311788 560272-010 610893-10 P31009 P31023 P50183 P52009

BAR, CLAMP FIXED IDL/RL Roll Idler 2.187D 2200-10 SHAFT,IDL/RL,,.750 D,14.438 L,RMVBL S-WRAP COLLAR, ALUM 1-1/2ODX3/4IDX1/2W RING, EXT RTNG 3/4 SHAFT SCW, SHOULDER 3/8X1-1/4 WSHR, FLAT FIBERGLASS .755X1.005X.032

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052426-10

DESCRIPTION

Idler Roll, 2.187 Inch D, With Removable S Wrap Doc#: 102


ASSEMBLY: 052468-210

Adjustable 2 Inch Stripping Roll and Arm

SEQ# QTY ITEM DESCRIPTION _________________________________________________________________________________________________________________________________ _________________________________

1 2 3 4 5 6 7 8

2 1 1 2 2 2 2 2

314780-P02 56M043-10 610825-11 P31009 P50179 P52033 P53029 P52009

BLK, IDL/RL SPT LP3000 IDL/RL, 10"MACH 2"D KNRLD SHAFT,IDLER,,75 D,14.438L,LP3000 HOT FOIL CASSETTE COLLAR, ALUM 1-1/2ODX3/4IDX1/2W SCW, SOC HD CAP 3/8-16UNRC-3AX1-1/4 WSHR, FLAT 13/32X13/16X16GA SCW, CUP PT SOC SET 1/4-20UNRC-3AX.38 WSHR, FLAT FIBERGLASS .755X1.005X.032

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM


DESCRIPTION

Adjustable 2 Inch Stripping Roll and Arm Doc#: 104



Unwind Dancer, Vertical, 10 Inch Machine


1 3 6 8 9 11 12 13 14 15 16 17 18 21 24 27 28 29 30 31 32 33 34

1 1 1 2 1 1 2 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 4

052790-10 062918-210-P02 315013 620735-P02 620764 95M002 P10007 P31021 P40006 P40024 P40176 P41006 P41050 P50266 P52033 P34057-001 P55002 P53016 P41003 P41037 P40026 826927-P04 P50021

Idler Roll, Dancer Dancer Arm and Pivot Shaft, Unwind, 10 Inch Machine BELLCRANK, DNCR LP3000 STOP, DANCER LIMIT 2300 Stud, Air Cylinder CLEVIS, ROD MODIF W/PIN BEARING,BALL,1 ID,52MM OD,1-7/16 WD,W/COLLAR RING, EXT RTNG 1/2 SHAFT EXH, QUICK SILENCER, AIR 1/4NPT CYL, AIR W/PIVOT BRKT 2-1/2"BX2"STROKE ELBOW, MALE 90DEG M-B 1/4TX1/4NPT NIPPLE, HEX PIPE 3/8MPTX3/8MPPT SCW, HEX HD CAP GRD 8 3/8-16UNC-2AX1.25BLACK WSHR, FLAT 13/32X13/16X16GA TUBING, PVC CLEAR 1IDX3/16WALLX1-1/2"L KEY, SOFT CHAM SQ 1/4X1/2 SCW, CUP PT SOC SET 10-32UNRF-3AX.38 Fitting, Pneumatic Tee Male 1/4 Inch Barb CONN, FEMALE M-B 1/4TX1/8FPT SILENCER, FLOW CNTRL 1/8NPT ADJ Guard, Dancer Arm SCW, BTN HD SOC CAP 10-32UNRF-3AX.38

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM


DESCRIPTION

Unwind Dancer, Vertical, 10 Inch Machine Doc#: 106


ASSEMBLY: 052752-10



1 2 3 4 5 7 8

1 1 2 1 1 1 4

315031-1 P50183 313240-2 560625-10 610890-10 P31023 P17090-001

BAR, CLAMP FIXED IDL/RL SCW, SHOULDER 3/8X1-1/4 CVR, ST/STL 3INCH IDL/RL IDL/RL, 3"D (LO-MASS) SHOT-PEENED EXTND LENGTH 10"2200G Idler Roll Shaft, 0.750 D, 14.438 L, Corrosion Resistance RING, EXT RTNG 3/4 SHAFT O-RING, NEOPRENE 5/8X13/16X3/32

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052752-10

DESCRIPTION




Web Guide, North American, Standard Materials, Infrared Sensor, W/Tape Disp


1 8 9 10

1 4 4 4

P25235-210 P50109 P52053 P52033

Web Guide, North American, W/Integrated Splicing Platform SCW, SOC HD CAP 3/8-16UNRC-3AX1 WSHR, SPLIT LCK PLTD 3/8 WSHR, FLAT 13/32X13/16X16GA

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM


DESCRIPTION

Web Guide, North American, Standard Materials, Infrared Sensor, W/Tape Disp Doc#: 110


ASSEMBLY: 052773-1

Unwind Air Brake, Infeed Pacing

SEQ# QTY ITEM DESCRIPTION _______________________________________________________________________________________________________________________________________________ ___________________

1 2 3 4

1 3 3 1

P44131 P50027 P52052 P40638-1

DISC, BRK INF/PAC SCW, SOC HD CAP 1/4-28UNRF-3AX3/4 WSHR, SPLIT LCK PLTD 1/4 Brake, Air Actuated Spring Released, Nexen (835014) Disc Brake W/Ultra LoCo With

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052773-1

Unwind Air Brake, Infeed Pacing Doc#: 112


ASSEMBLY: 052775-10

Unwind Infeed Pacing Roll, with Bearings


1 2

1 062562-10 3 P50058

ASM, I/F PAC/RL W/BRNGS 10"MACH SCW, BTN HD SOC CAP 10-32UNRF-3AX.50

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052775-10

DESCRIPTION

Unwind Infeed Pacing Roll, with Bearings Doc#: 114


ASSEMBLY: 052778

Cover, Rear, Unwind, Cantilevered


1 2 3 4 5 6 7 8 9

1 1 1 2 2 3 6 2 2

315317 826620-P02 826621-P02 P50025 P50193 P50223 P50330 P52033 P52034

, Door Track, Bottom Rear, Unwind, Cantilevered Cover, Rear, Unwind, Cantilevered Door, Rear, Unwind, Cantilevered SCW, SOC HD CAP 10-32UNRF-3AX3/4 SCW, HEX HD CAP GRD 8 3/8-24UNF-2AX.50 BLACK SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK SCW, SHT/MTL PAN HD PH TYPE B #10X1/2 BLACK WSHR, FLAT 13/32X13/16X16GA WSHR, FLAT PLTD #10 7/32X1/2X18GA

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052778

DESCRIPTION

Cover, Rear, Unwind, Cantilevered Doc#: 116


ASSEMBLY: 052781

Unwind Frame, Cantilevered, 40 Inch Capacity


1 2 3 4 5 6 7 11 12 13 14 15 16 17 18 19 20 21 22 23 24

1 1 2 1 2 1 1 1 1 1 1 1 1 2 1 12 6 8 2 2 2

405684-P02 405685-P02 405687-10-P02 063048-1 405695-P02 842817-P02 842854-P02 P212344-100 P10224 P10007 P52075 P40020 P41040 P32024 P55004 P50108 P54097 P50179 P50223 P50053 P50125

Unwind Frame, Front, Cantilevered Plate, Unwind Coreholder, Cantilevered Shear Plate Machine , Rewind, Cantilevered Tiebar Block BRKT, R DECK SHT/MTL SPT 2200X P/S Bracket, Mounting, Roll End Shut Off Sensor, Unwind Brake, Tension, GBD-Air cooled, Through Shaft, (Black) BEARING,BALL,65MM ID,120MM OD,23MM WD,W/RING BEARING,BALL,1 ID,52MM OD,1-7/16 WD,W/COLLAR WSHR, FENDER 1-1/4ODX13/32IDX10GA UNION, ROTARY AIR ELBOW, MALE 90 M-B 1/4TX1/8NPT BOLT, LEVEL W/CONE TIP 3/4-16X4-1/2L KEY, SOFT CHAM SQ 1/4X1 SCW, SOC HD CAP 3/8-16UNRC-3AX3/4 PIN, STD DOWEL 3/8X1-1/4 SCW, SOC HD CAP 3/8-16UNRC-3AX1-1/4 SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK SCW, SEMS RD HD PHIL 10-32UNF-2AX1/2 BLACK SCW, RD HD SLOT MACH 4-40UNC-2AX1/2 BLACK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052781

DESCRIPTION

Unwind Frame, Cantilevered, 40 Inch Capacity Doc#: 118



ASSEMBLY: 052783

Gear Box, Driveline, Print Station


1 2 3 4 5 6 7 8 9 10 11 12

1 1 2 2 1 1 1 1 1 1 3 3

130133-HG 063139 P12007 P31024 P56060 P55010 P53005 P52081 P52052 P50078 P50034 P52053

Gear & Clutch, Helical Hi Grade 16P 42T 24 4' Gear Box Assembly W/O Upper Right Leg, W/Registry BEARING,THRUST WASHER,1 ID,1-1/2 OD,1/16 THK, RING, EXT RTNG 1" SHAFT WSHR, SPRNG WAVE 1.05X1.35X.015 KEY, SOFT CHAM SQ 3/16X1 SCW, CUP PT SOC SET 1/4-20UNRC-3AX.25 WSHR, FLAT ST/STL .256IDX.875 OD WSHR, SPLIT LCK PLTD 1/4 SCW, HEX HD CAP GRD 8 1/4-28UNF-2AX.75 BLACK SCW, SOC HD CAP 3/8-24UNRF-3AX1-1/4 WSHR, SPLIT LCK PLTD 3/8

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052783

Gear Box, Driveline, Print Station Doc#: 121


ASSEMBLY: 052785-10

Slide, Ink Drawer


1 2 3 4 5 6 7 8 9 10 11 12 13

1 4 4 8 4 4 4 1 2 1 1 1 4

405661-10-P04 P18075 P18076 P14006 P52052 P50116 P50117 842837-P04 P50025 315031-1 P50109 312099 P50114

Plate, V Track Mounting Long Bushing, Stationay 3/8IDx.706 Long x 1/4 Bore Bushing, Eccentric Adjust 3/8IDx.706 Long x 1/4 Bore WHEEL, GD V-ROLLER 1.21ODX3/8IDX7/16W WSHR, SPLIT LCK PLTD 1/4 SCW, HEX HD CAP GRD 8 1/4-28UNF-2AX1.25BLACK SCW, HEX HD CAP GRD 8 1/4-28UNF-2AX1.50BLACK Stop, Drawer Slide SCW, SOC HD CAP 10-32UNRF-3AX3/4 BAR, CLAMP FIXED IDL/RL SCW, SOC HD CAP 3/8-16UNRC-3AX1 BLK, LATCH RELEASE INK STA 2200 UV FLEXO SCW, BTN HD SOC CAP 10-32UNRF-3AX.63

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052785-10

Slide, Ink Drawer Doc#: 123


ASSEMBLY: 052790-10

Idler Roll, Dancer


1 2 3 4 5 6 7

2 1 1 2 2 2 1

313240-2 600820-10 560178-10 P31023 P50086 P17090-001 P56012

CVR, ST/STL 3INCH IDL/RL Idler Roll Shaft, Dancer Arm IDL/RL, 10"MACH 3"D (LO-MASS) SHOT-PEENED RING, EXT RTNG 3/4 SHAFT SCW, SHOULDER 1/2X3/4 O-RING, NEOPRENE 5/8X13/16X3/32 WSHR, SPRNG WAVE .78X1.004X.027 PLTD

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052790-10

Idler Roll, Dancer Doc#: 125


ASSEMBLY: 052797

Bearing Block Components, Front and Rear, Base Roll, 2.5 Inch Slot


1 2 3 4 5 6 7 8 9 10

1 1 1 1 2 1 1 1 6 3

391913 391911 391915 P10028 P56045 P52046 P52035 P50065 P50161 P50194

Bearing Block, Front, Base Roll & Roll, 2.5 Inch Slot Bearing Block, Rear, Base Roll, 2.5 Inch Slot Bearing Block Cap Front, Base Roll, 2.5 Inch Slot BEARING,BALL,3/4 ID,1-5/8 OD,1/2 WD, WSHR, SPRNG WAVE 1.6210DX1.2611DX.0185 WSHR, FENDER PLTD 11/32X1-1/4X1/8(For 5/16 Bolt) WSHR, SPLIT LCK PLTD 5/16 SCW, HEX HD CAP GRD 8 5/16-18UNC-2AX.75BLACK SCW, SOC HD CAP 1/4-20UNRC-3AX1 SCW, SOC HD CAP 1/4-20UNRC-3AX1-1/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052797

DESCRIPTION

Bearing Block Components, Front and Rear, Base Roll, 2.5 Inch Slot Doc#: 127


ASSEMBLY: 052798-10

Lock, Ink Drawer


1 2 3 4 5 6 7 8 9 10 11 12

1 1 2 1 2 2 4 4 4 2 2 4

826561 826562 311284-1 401956-P02 P40707 P41003 P41040 P50052 P50328 P53009 P53012 P41124

SHIELD, AIR CYL/CLAMP F INK STA 2200G SHIELD, AIR CLY/CLAMP R INK STA 2200G BLK, WEDGE LCK 1-1/4L INK STA 2200 PLT, AIR CYL MNTG INK STA 2200-10C Air Cylinder, Double Acting 1-1/16 Bore x 1 Stroke W/No Tang Fitting, Pneumatic Tee Male 1/4 Inch Barb ELBOW, MALE 90 M-B 1/4TX1/8NPT SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK SCW, SHOULDER 1/4X1 SCW, CUP PT SOC SET 1/4-28UNRF-3AX.25 SCW, CUP PT SOC SET 8-32UNRC-3AX.125 Tubing, Pneumatic 1/4 Inch Polyethylene 1/6 Inch Wall

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052798-10

Lock, Ink Drawer Doc#: 129


ASSEMBLY: 052799

Front Doors, Interlocked 2 Slot Diecut, Clear


1 3 4 6 7 11 13 14 19

2 2 2 2 2 4 8 8 4

315351-P02 330621-1-P02 330621-101-P02 826605-1 842858-P02 P50043 P50069 P50123 P59262

Plate, Spacer, Interlock Switch Mounting Track, Front Door, Slide, 35.94 Inches Long Door Insert, Lower Track, 35.88 Inches Long Front Door, Slide, Interlocked, 18.38 Inches Wide, Clear Bracket, Mounting, Interlock Key, Front Door SCW, RD HD SLOT MACH 10-32UNF-2AX1-1/2BLACK SCW, BTN HD SOC CAP 10-32UNRF-3AX.75 SCW, RD HD SLOT MACH 8-32UNC-2AX1/2 BLACK BTN, PLUG 13/16 RECESSED HEAD

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052799

DESCRIPTION

Front Doors, Interlocked 2 Slot Diecut, Clear Doc#: 131




ASSEMBLY: 052799-3

Front Doors, Interlocked, Master Control, Clear

SEQ# QTY ITEM DESCRIPTION _______________________________________________________________________________________________________________________________________________________ ___________

1 2 3 4 5 6 7 11 12 13 14 15 16 17 18 19

1 1 2 2 1 2 2 4 2 8 8 3 2 2 2 4

315351-P02 315351-1-P02 330621-1-P02 330621-101-P02 826587-P02 826605-1 842858-P02 P50043 P50053 P50069 P50123 P50223 P51008 P52034 P52057 P59262

Plate, Spacer, Interlock Switch Mounting Plate, Spacer, Interlock Switch Mounting Track, Front Door, Slide, 35.94 Inches Long Door Insert, Lower Track, 35.88 Inches Long End Plate, Front Door Front Door, Slide, Interlocked, 18.38 Inches Wide, Clear Bracket, Mounting, Interlock Key, Front Door SCW, RD HD SLOT MACH 10-32UNF-2AX1-1/2BLACK SCW, SEMS RD HD PHIL 10-32UNF-2AX1/2 BLACK SCW, BTN HD SOC CAP 10-32UNRF-3AX.75 SCW, RD HD SLOT MACH 8-32UNC-2AX1/2 BLACK SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK NUT, HEX 10-32UNF-2B PLTD WSHR, FLAT PLTD #10 7/32X1/2X18GA WSHR, SPLIT LCK PLTD #10 BTN, PLUG 13/16 RECESSED HEAD

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052799-3

DESCRIPTION

Front Doors, Interlocked, Master Control, Clear Doc#: 135


ASSEMBLY: 052809-10



1 2 3 4 5 6 7

1 1 1 1 1 1 2

311788 P50183 P31009 560649-10 610890-10 P31023 P52009

BAR, CLAMP FIXED IDL/RL SCW, SHOULDER 3/8X1-1/4 COLLAR, ALUM 1-1/2ODX3/4IDX1/2W Idler Roll, 2 Inch D, 12.62" Long, Shot-Peened Idler Roll Shaft, 0.750 D, 14.438 L, Corrosion Resistance RING, EXT RTNG 3/4 SHAFT WSHR, FLAT FIBERGLASS .755X1.005X.032

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052809-10

DESCRIPTION



ASSEMBLY: 052824

Cover, Rear, Plate Roll Throw Off


1 2 4

1 826674-1-P02 1 826674-2-P02 8 P50052

Cover, Rear, Throw Off Cover, Rear, Throw Off SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052824

Cover, Rear, Plate Roll Throw Off Doc#: 139


ASSEMBLY: 052826

Drive Line, Print Station to Print Station


1 2 3 4

1 4 2 4

630830-3 P31207 974662 P55007

Shaft, Connecting 3/4D, 5.964 Long HUB, FLEX LNG 3/4B PRECISION SINTERED PARTS KIT, REPAIR SNGL FLEX KEY, SOFT CHAM SQ 3/16X1-1/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052826

DESCRIPTION

Drive Line, Print Station to Print Station Doc#: 141


ASSEMBLY: 052829

Rear Cover W/Door, 2-Slot Diecut

SEQ# QTY ITEM DESCRIPTION _________________________________________________________________________________________________________________________________ _________________________________

1 2 3 4 5

1 1 2 2 6

826625-P02 827039-P02 P52034 P50025 P50330

Cover, 2-Slot Diecut, W/Stiffener Door, 2 Slot Diecut, Rear WSHR, FLAT PLTD #10 7/32X1/2X18GA SCW, SOC HD CAP 10-32UNRF-3AX3/4 SCW, SHT/MTL PAN HD PH TYPE B #10X1/2 BLACK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052829

Rear Cover W/Door, 2-Slot Diecut Doc#: 143



ASSEMBLY: 052834

Nip Guard


1 2 3

1 315318 1 P50312 1 P54055

Guard, Pinch Point Gear SCW, SOC HD CAP 10-32UNRFX2 ST/STL PIN, SLOTTED SPRNG 1/8X3/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052834

Nip Guard Doc#: 146


ASSEMBLY: 052852

Guard, Sheet Metal, Front Die Slot


1 2

1 826669-P04 4 P50052

Weldment, Front Slot Guard SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052852

DESCRIPTION

Guard, Sheet Metal, Front Die Slot Doc#: 148


ASSEMBLY: 052856

Guard, Sheet Metal, Rear Die Slot


1 2

1 826667-P04 4 P50052

Guard, Sheet Metal, Rear Slot Cover SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052856

Guard, Sheet Metal, Rear Die Slot Doc#: 150


ASSEMBLY: 052859

E-Stop Rope Mounting Components


0 1 2 3 4 5 6 7 8 9

1 1 1 1 1 2 2 2 1 1

031570 315313-P02 315314-P02 P16417 P50027 P54028 P50080 P50559 P20957-008 P20995-001

Diagram, Wiring E-Stop Rope Module Block, E-Stop, Pulley Mounting for P16417 Block, E-Stop, Switch Mounting PULLEY, CABLE 1-1/4D STL SCW, SOC HD CAP 1/4-28UNRF-3AX3/4 PIN, STD DOWEL 1/4X1 SCW, SOC HD CAP 1/4-20UNRC-3AX2-1/2 SCW, SOC HD CAP 1/4-20UNRC-3AX1-3/4LG Cord Grip, 1/2 Conduit .20 Cord NUT, NYLON 1/2-14NPT

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052859

DESCRIPTION

E-Stop Rope Mounting Components Doc#: 152


ASSEMBLY: 052868-10

Guard, Sliding, Master Control, 4 Inch Base Roll


1 2 3 4 5 7 8 9 10 11 12 13 14

1 2 2 5 4 2 2 2 2 1 2 2 2

826660-10-P04 330623 330624 P50151 P50174 P59254 P53003 P50123 P51095 826666-P02 P50053 P50043 P51008

Guard, Sheet Metal, Sliding Cover, Master Control Track, Guard, Slide, Sheeting Station Block, Guard, Slide, Sheeting Station SCW, SHOULDER 5/16X3/8 SCW, SOC HD CAP 1/4-20UNRC-3AX3/4 PLUNGER, SPRNG -BALL 1/4-20X17/32 SCW, CUP PT SOC SET 10-32UNRC-3AX.50 SCW, RD HD SLOT MACH 8-32UNC-2AX1/2 BLACK NUT, HEX PLASTIC 1/4-20UNC-2B Bracket, Interlock Switch Mounting SCW, SEMS RD HD PHIL 10-32UNF-2AX1/2 BLACK SCW, RD HD SLOT MACH 10-32UNF-2AX1-1/2BLACK NUT, HEX 10-32UNF-2B PLTD

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052868-10

DESCRIPTION

Guard, Sliding, Master Control, 4 Inch Base Roll Doc#: 154


ASSEMBLY: 052876-10

Guard, Sliding, Diecut Module


1 2 3 4 5 7 8 9 10 11

1 2 2 6 4 2 2 2 1 2

826683-10-P04 330623-1 330624-1 P50151 P50174 P59254 P53003 P50052 315364-P04 P51095

Guard, Sheet Metal, Sliding Cover, Diecut Module Track, Guard, Slide, Diecut Module Block, Guard, Slide, Diecut Module SCW, SHOULDER 5/16X3/8 SCW, SOC HD CAP 1/4-20UNRC-3AX3/4 PLUNGER, SPRNG -BALL 1/4-20X17/32 SCW, CUP PT SOC SET 10-32UNRC-3AX.50 SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK Bracket, Interlock Switch Mounting NUT, HEX PLASTIC 1/4-20UNC-2B

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052876-10

Guard, Sliding, Diecut Module Doc#: 156


ASSEMBLY: 052907

Driveline, Diecut To Master Control W/ MA Gear Box


1 2 3 4 5 6

1 2 1 3 3 1

630830-2 974662 29M035 P31207 P55010 P55004

Shaft, Connecting 3/4D, 3.73 Long KIT, REPAIR SNGL FLEX Hub, Flex Coupling 1-1/8 Bore HUB, FLEX LNG 3/4B PRECISION SINTERED PARTS KEY, SOFT CHAM SQ 3/16X1 KEY, SOFT CHAM SQ 1/4X1

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052907

DESCRIPTION

Driveline, Diecut To Master Control W/ MA Gear Box Doc#: 158


ASSEMBLY: 052913

Cartridge, Front & Rear, for Impression Roll


1 3 6 7 9

1 1 3 3 1

710325 710326 P50025 P50192 78M004

Cartridge, Impression Roll , Front Cartridge, Impression Roll , Rear SCW, SOC HD CAP 10-32UNRF-3AX3/4 SCW, HEX HD MACH 10-32UNF-2AX3/4 BLACK PAD, RBBR

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 052913

DESCRIPTION

Cartridge, Front & Rear, for Impression Roll Doc#: 160



Manual Registry 10 Inch Machine


1 2 3 4 5 6 8 9 10 13 16 17 18 19 20 21 22 23

1 3 1 1 2 1 1 1 2 1 4 1 1 1 2 2 1 1

P54154 110588 314680 630847-10 76M014 77M019-3 P31005 P53009 P52003 610902 P52054 P52038 P52052 P50078 P31093 P55027 P52129 P50017

PIN, MAN REG 2200 Gear, Registry Adjust 1/8 47 Teeth 7/16 Bore Online W/Manual BLK, MAN REG SHAFT, REG CNTRL MAN 2200-10 SCW, NYLON TIP SET 10-32X3/8LG KNOB, MAN REG 3/8-16 INSERT COLLAR, 3/8 SCW, CUP PT SOC SET 1/4-28UNRF-3AX.25 WSHR, FLAT FIBERGLASS .380 ID x .630 OD x .032 THK SHAFT, GR IDL REG 2200G WSHR, FLAT FIBERGLASS .442X.620X.032 WSHR, FENDER PLTD 1ODX9/32IDX1/8THK WSHR, SPLIT LCK PLTD 1/4 SCW, HEX HD CAP GRD 8 1/4-28UNF-2AX.75 BLACK RING, EXT RTNG 7/16 SHAFT CHARLIE KEY, SOFT CHAM SQ 3/32X1/2 WSHR, FENDER PLTD 3/16X3/4X18GA SCW, SOC HD CAP 10-32UNRF-3AX3/8

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM


DESCRIPTION

Manual Registry 10 Inch Machine Doc#: 162


ASSEMBLY: 052967

Adjusting Arm Housing, Front


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

18 19 20 21 22 23 24 25 26 27 28

1 1 10 3 2 4 2 1 14 1 1

311001 311805 311806 311857 315261 315449 315451 320503 620378 770770 770770-3 780241 826622 71M004 76M014 P31019 P40280 P41035 P41039 P41124 P50025 P50028 P50052 P50084 P50153 P50615 P51039 P54008

BLK, IMP ADJ DELTA P/S BLK, SPRNG HSG ADJ ARM Clevis, Piston Rod Adjustment Arm BLK, P/R T/O UNIVERSAL Gibb, Adjusting Arm Arm, Adjusting Arm, Front Slide, Adjusting Arm, Front Adjusting Arm, Housing Front STANDOFF, AIR CYL 1.84"L Adjusting Screw, Meter Roll 5/16-24 x 2.1875 Length Adjusting Screw, Meter Roll 5/16-24 x 9.250 Length ADJ, ARM SPRNG DETENT 6200A Cover, Adjusting Arm Housing (2 Pieces) CRTG, A/R SCW, NYLON TIP SET 10-32X3/8LG RING, EXT RTNG 1/4 SHAFT CYL, AIR SPRNG EXT 1-1/16"BX2" S (CUST SER NOTE: PRESSURE IS 10 LBS EXTENDED/20 UNION, ELBOW M-B 1/4"TUBE BR CONN, MALE M-B 1/4TX1/8NPT Tubing, Pneumatic 1/4 Inch Polyethylene 1/6 Inch Wall SCW, SOC HD CAP 10-32UNRF-3AX3/4 SCW, SOC HD CAP 1/4-28UNRF-3AX1 SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK SCW, BTN HD SOC CAP 10-32UNRF-3AX1.00 SCW, SHOULDER 5/16X1/2 SCW, FLAT HD SOC CAP 10-32UNF3AX1/2 ST/STL NUT, HEX JAM 5/16-24UNF-2B PLTD PIN, TYPE-H GRVD 1/4X1 PLTD

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052967

Adjusting Arm Housing, Front Doc#: 164

ASSEMBLY: 052967

Adjusting Arm Housing, Front


29

1 P56075

SPRNG, COMP 5/8ODX2-1/2LG DIE SPR

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052967

Adjusting Arm Housing, Front Doc#: 164


ASSEMBLY: 052968

Adjusting Arm Housing, Rear


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

20 21 22 23 24 25 26 27 28

1 1 10 3 2 4 2 1 14

311001 311805 311806 311857 315261 315450 052834 315452 315323 320504 620378 770770 770770-3 780241 826734 71M004 76M014 P31019 P40280 P41035 P41039 P41124 P50025 P50028 P50052 P50084 P50153 P50615

BLK, IMP ADJ DELTA P/S BLK, SPRNG HSG ADJ ARM Clevis, Piston Rod Adjustment Arm BLK, P/R T/O UNIVERSAL Gibb, Adjusting Arm Arm Adjusting, 1/2" Pins, Rear Nip Guard Slide, Adjusting Arm, Rear Plate, Plunger, Plate Roll Pin Adjusting Arm, Housing Rear STANDOFF, AIR CYL 1.84"L Adjusting Screw, Meter Roll 5/16-24 x 2.1875 Length Adjusting Screw, Meter Roll 5/16-24 x 9.250 Length ADJ, ARM SPRNG DETENT 6200A Cover, Adjusting Arm Housing, Rear, 2 Pieces CRTG, A/R SCW, NYLON TIP SET 10-32X3/8LG RING, EXT RTNG 1/4 SHAFT CYL, AIR SPRNG EXT 1-1/16"BX2" S (CUST SER NOTE: PRESSURE IS 10 LBS EXTENDED/20 UNION, ELBOW M-B 1/4"TUBE BR CONN, MALE M-B 1/4TX1/8NPT Tubing, Pneumatic 1/4 Inch Polyethylene 1/6 Inch Wall SCW, SOC HD CAP 10-32UNRF-3AX3/4 SCW, SOC HD CAP 1/4-28UNRF-3AX1 SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK SCW, BTN HD SOC CAP 10-32UNRF-3AX1.00 SCW, SHOULDER 5/16X1/2 SCW, FLAT HD SOC CAP 10-32UNF3AX1/2 ST/STL

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052968

Adjusting Arm Housing, Rear Doc#: 166

ASSEMBLY: 052968

Adjusting Arm Housing, Rear


29 30 31 32 33 34

1 1 1 2 2 5

P51039 P54008 P56075 P50181 P56072 P52102

NUT, HEX JAM 5/16-24UNF-2B PLTD PIN, TYPE-H GRVD 1/4X1 PLTD SPRNG, COMP 5/8ODX2-1/2LG DIE SPR SCW, SHOULDER 5/16X1-1/4 SPRNG, GRND END COMP .48X.067X7/8LG MW PLTD WSHR, FLAT STL .255IDX.375ODX.010

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052968

Adjusting Arm Housing, Rear Doc#: 166


ASSEMBLY: 052986

Drive Line, 2 Slot Diecut


1 2 3 5 6 7 10

2 1 2 6 6 2 4

062850-1 290153 P10009 P50179 P52053 P54028 P55021

ASM, GR/BX W/O UPR LFT LEG W/PULLEY ASM, HUB FLEX LNG 3/4"B TO 3/4"B BEARING,BALL,1-1/8 ID,62MM OD,1-9/16 WD,S/M SCW, SOC HD CAP 3/8-16UNRC-3AX1-1/4 WSHR, SPLIT LCK PLTD 3/8 PIN, STD DOWEL 1/4X1 KEY, SOFT CHAM SQ 3/16X3/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 052986

Drive Line, 2 Slot Diecut Doc#: 168


ASSEMBLY: 053061

Cover, Rear, Printstation

SEQ# QTY ITEM DESCRIPTION _____________________________________________________________________________________________________________________________________________ _____________________

1 2 3 4 6 7 8 9 10 11 12

1 1 1 1 11 4 4 1 6 1 1

826842-P02 823121-1-P02 842817-P02 842895-P02 P50330 P52034 P50045 P50193 P50223 826722-P02 842896-P02

Rear Cover, Left, Print Station DOOR, P/S & D/C R 2200G 35.563X35.938L BRKT, R DECK SHT/MTL SPT 2200X P/S Guard, Drive Line SCW, SHT/MTL PAN HD PH TYPE B #10X1/2 BLACK WSHR, FLAT PLTD #10 7/32X1/2X18GA SCW, SOC HD CAP 10-32UNRF-3AX1/2 SCW, HEX HD CAP GRD 8 3/8-24UNF-2AX.50 BLACK SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK Cover, Rear Print Station Guard, Drive Line, Print Station

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 053061

Cover, Rear, Printstation Doc#: 170


ASSEMBLY: 053079-1

, Door Track, 2-Slot Diecut to Sheeting Station


1 2 3

1 315548-1 2 P50193 2 P52033

, Bottom Door Track, Rear, 21.95 Long SCW, HEX HD CAP GRD 8 3/8-24UNF-2AX.50 BLACK WSHR, FLAT 13/32X13/16X16GA

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053079-1

DESCRIPTION

, Door Track, 2-Slot Diecut to Sheeting Station Doc#: 172


ASSEMBLY: 053079-5

, Door Track, Print Station To Print Station


1 2 3

1 315548-5 2 P50193 2 P52033


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053079-5

DESCRIPTION

, Door Track, Print Station To Print Station Doc#: 174


ASSEMBLY: 053079-6

, Door Track, Print Station to 2-Slot Diecut


1 2 3

1 315548-6 2 P50193 2 P52033


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053079-6

DESCRIPTION

, Door Track, Print Station to 2-Slot Diecut Doc#: 176


ASSEMBLY: 053079-8

, Door Track, Unwind To Print Station


1 2 3

1 315548-8 2 P50193 2 P52033


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053079-8

DESCRIPTION

, Door Track, Unwind To Print Station Doc#: 178


ASSEMBLY: 053101-3

Turnbuckle W/Mounting Blocks


1 2 3

1 052305-3 2 315571-P04 4 P50580

Turnbuckle Assembly Block, Mounting, Turnbuckle SCW, SOC HD CAP 3/8-16 UNC X 2.00

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 053101-3

Turnbuckle W/Mounting Blocks Doc#: 180


ASSEMBLY: 053102-1

Drive Components, Rewind, 1HP, Cantilevered for Upper or Lower


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 1 1 1 1 1 1 1 1 1 1 4 4 4 4 8

826873-P02 P10007 P10224 P15029 P16063 P16378 P18062 P18208 P22515 P40020 P41039 P50166 P50223 P51031 P52035 P52041

18 19

1 P201536 1 780439

Rewind Cover, 2Hp Motor, Single Cantilevered BEARING,BALL,1 ID,52MM OD,1-7/16 WD,W/COLLAR BEARING,BALL,65MM ID,120MM OD,23MM WD,W/RING GR/BLT, 1/2P 57X1 PULLEY, GR/BLT 1/2P 20TX1 PULLEY, GR/BLT 72TX1/2P TYPE C1 BSHNG, TL TL 1210X7/8 BUSHING, TL 3020X2-1/2 Motor, Inverter Duty Vector Performance AC E-face Foot Mounted 1 Hp UNION, ROTARY AIR CONN, MALE M-B 1/4TX1/8NPT SCW, HEX HD CAP GRD 8 5/16-24UNF-2AX1.5BLACK SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK NUT, HEX 5/16-24UNF-2B PLTD WSHR, SPLIT LCK PLTD 5/16 WSHR, FLAT PLTD 11/32X11/16X16GA (FOR COMCO APPLICATIONS, REPLACES WF25) Cord, Grip SO Cable .770-.895 Plastic Liquidtight Cover, Rewind Core Holder Shaft

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053102-1

DESCRIPTION

Drive Components, Rewind, 1HP, Cantilevered for Upper or Lower Doc#: 182


ASSEMBLY: 053105

Covers, Rear, Master Control

SEQ# QTY ITEM DESCRIPTION _________________________________________________________________________________________________________________________________________ _________________________

1 2 3 4 5 6 10 11

1 1 1 1 1 1 30 3

826876-P02 826875-P02 826728-P02 826729-P02 826730-P02 826874-P02 P50052 P50330

Cover, Rear, Master Control Cover, Rear, End, Rewind, Master Control Cover, Back, Main Power Enclosure Cover, Rear, Top, Main Power Enclosure Cover, End, Main Power Enclosure Cover, Access SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK SCW, SHT/MTL PAN HD PH TYPE B #10X1/2 BLACK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 053105

Covers, Rear, Master Control Doc#: 184



ASSEMBLY: 053110

Rewind Covers, Lower, Single Cantilevered


1 2 3 4 5 6 7 8 9 10

1 1 1 6 12 1 2 1 2 1

826868-1-P02 826870-1-P02 826874-P02 P50052 P50174 P59012 P52034 P41185 P52033 P41042

Cover, Top, Rewind Cover, Sheetmetal, Side, Lower Rewind Cover, Access SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK SCW, SOC HD CAP 1/4-20UNRC-3AX3/4 DISPENSER, TAPE WSHR, FLAT PLTD #10 7/32X1/2X18GA COUPLER, BDY1/4INSERT 1/8NMPT WSHR, FLAT 13/32X13/16X16GA ELBOW, FEMALE 90 M-B 1/4TX1/8FPT

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053110

DESCRIPTION

Rewind Covers, Lower, Single Cantilevered Doc#: 187


ASSEMBLY: 053114-10

Guarding, Diecut Module, 2 Slot


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

1 2 2 1 1 1 1 1 1 1 1 1 4 6 2 36 2 2 2 10 1 1 3 4 1 1 4

052876-10 052852 052856 826891-10-P04 826646-10-P04 826648-10-P04 826649-10-P04 826896-10-P04 826892-10-P04 826893-10-P04 826890-10-P04 315379-10-P04 P50031 P50043 P50055 P50223 P50236 P50557 P51006 P51008 315381-P02 315382-P02 P57177 053120 826897-P04 826898-P04 P52034

Guard, Sliding, Diecut Module Guard, Sheet Metal, Front Die Slot Guard, Sheet Metal, Rear Die Slot Guard, Sheet Metal, Left Hold Down, Slot 1, Diecut Module Guard, Sheet Metal, Right Hold Down, Slot 1, Diecut Module Guard, Sheet Metal, Right Hold Down, Slot 2, Diecut Module Guard, Sheet Metal, Left Hold Down, Slot 2, Diecut Module Guard, Sheet Metal Cover, Top, Diecut Module Guard, Sheet Metal, Cover, Right, Diecut Module Guard, Sheet Metal Cover, Diecut Module Guard, Sheet Metal Cover, Top, Left, Diecut Module Bracket, Interlock Switch Mounting SCW, RD HD SLOT MACH 10-32UNF-2AX1/2 BLACK SCW, RD HD SLOT MACH 10-32UNF-2AX1-1/2BLACK SCW, SOC HD CAP 1/4-20UNRC-3AX1/2 SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK SCW, RD HD SLOT MACH 8-32UNC-2AX3/4 BLACK SCW, SHOULDER 3/8X5/8 NUT, HEX 8-32UNC-2B PLTD NUT, HEX 10-32UNF-2B PLTD Bracket, Magnet Mounting, Right Hand Bracket, Magnet Mounting, Left Hand CATCH, MAGNETIC SNAP IN 11.8LBS Riser Block, 2 Inch Tall, w/Bolts, for 2.5 Slot Guard, Sheet Metal, Cover Extension, Rear, Diecut Module Guard, Sheet Metal, Cover Extension, Front, Diecut Module WSHR, FLAT PLTD #10 7/32X1/2X18GA

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 053114-10

Guarding, Diecut Module, 2 Slot Doc#: 189


ASSEMBLY: 053118-1

Main Drive Motor, 10 Hp 208-240V


1 2 3 4 5 9 10

1 4 4 8 1 1 1

P22463 P50609 P52075 P51028 P32034-215 P20957-005 P20995-003

Motor, Standard Duty Totally Enclosed IP44 10Hp Screw, Socket Head Cap 3/8-16 UNRC-3A by 2-1/4 Full Threads SHCS PLN WSHR, FENDER 1-1/4ODX13/32IDX10GA NUT, HEX HALF 3/8-16UNC-2B PLTD Motor Base, Steel, Adjustable, For 10 HP Motor CORD, GRIP 1IN NPT .71-.98 CORD NUT, NYLON 1IN NPT

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053118-1

DESCRIPTION

Main Drive Motor, 10 Hp 208-240V Doc#: 191


ASSEMBLY: 053119-1

Driveline, Master Control & Sheeting Module W/MA Gear Box, 10 Hp

SEQ# QTY ITEM DESCRIPTION _______________________________________________________________________________________________________________________________________________________ ___________

1 2 3 5 7 8 9 11 12 13 14 16 17 18 19 20

2 4 1 2 1 1 1 1 2 1 6 1 4 2 2 3

062850-1 P10009 630686-1 315613 290153 290190 110670-1 P18209 P16441 P18177 P50179 P15152-1 P50008 P54096 P55004 P55010

ASM, GR/BX W/O UPR LFT LEG W/PULLEY BEARING,BALL,1-1/8 ID,62MM OD,1-9/16 WD,S/M Shaft, Connecting 1-1/8 Inch D 12.00 Inches Long Standoff, Bearing Driveline, Master Control Module W/MA Gear Box ASM, HUB FLEX LNG 3/4"B TO 3/4"B Hub Flex Coupling, .75 Inch to 1.125 Inch B Gear, Helical Drive LH 26DP 73 Tooth 1-1/8 Bore Hardened Bushing, P1x1-1/8 Type QD Poly-V PULLEY, POLY-V 5.6 PD 6 GRV TYPE L BSHNG, P1 X 1-3/8TYPE QD POLY-V SCW, SOC HD CAP 3/8-16UNRC-3AX1-1/4 BELT, POLY-V 6 GRV 1-1/8X50.0L TYPE L SCW, SHOULDER 1/2X1-1/4 PIN, STD DOWEL 1/2X1-1/4 KEY, SOFT CHAM SQ 1/4X1 KEY, SOFT CHAM SQ 3/16X1

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053119-1

DESCRIPTION

Driveline, Master Control & Sheeting Module W/MA Gear Box, 10 Hp Doc#: 193


ASSEMBLY: 053120

Riser Block, 2 Inch Tall, w/Bolts, for 2.5 Slot


1 2

1 390740-3-P04 2 P50279

Riser Block, 2 Inch Tall, for 2.5 Slot SCW, SHOULDER 1/2X2-3/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053120

DESCRIPTION

Riser Block, 2 Inch Tall, w/Bolts, for 2.5 Slot Doc#: 195


ASSEMBLY: 053123

Drive Line, Print Station to Diecut


1 2 3 4

1 4 2 4

630830-4 P31207 974662 P55007

Shaft, Connecting 3/4D, 2.25 Long HUB, FLEX LNG 3/4B PRECISION SINTERED PARTS KIT, REPAIR SNGL FLEX KEY, SOFT CHAM SQ 3/16X1-1/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 053123

Drive Line, Print Station to Diecut Doc#: 197


ASSEMBLY: 053129-10

Unwind Frame, Infeed Pacing, Dancer


0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

2 1 1 1 1 2 2 2 1 3 3 12 4 2 4 4 4 2

P201087-01 405950-P02 405951-P02 405687-10-P02 063048-10-P04 051456 315240-P02 600615-1-P02 826634-1-P02 P201495 P201493 P50108 P54097 P32024 P50130 P54096 P50052 P50223

CLAMP, WIRE TIE DOWN 1/4IN OR (M6) SCREW Unwind Frame, Front, Infeed Pacing, Web Guide, Dancer Unwind Frame, Rear, Infeed Pacing, Web Guide, Dancer Shear Plate Machined ASM, TIE PLATE 2300 D/C Tiebar Block, Upper Spacer, Upper Bracket, Wireway Mounting, 35.9 Inch Wiring Duct, 4 Inch x 3 Inch x 72 Inch Grey Slotted Hole Mounting Cover, Wiring Duct, 4 Inches by 72 Inches, Grey SCW, SOC HD CAP 3/8-16UNRC-3AX3/4 PIN, STD DOWEL 3/8X1-1/4 BOLT, LEVEL W/CONE TIP 3/4-16X4-1/2L SCW, SHOULDER 1/2X5/8 PIN, STD DOWEL 1/2X1-1/4 SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053129-10

DESCRIPTION

Unwind Frame, Infeed Pacing, Dancer Doc#: 199


ASSEMBLY: 053163-10

Guarding, Master Control Module


1 3 4 5 6 7 8

1 1 1 1 1 1 1

9 10 11 12 13 14 15 16 17

2 2 8 4 4 4 18 2 2

053162-10 052852 052856 826657-10-P04 826952-10-P04 826949-10-P04 826950-10-P04 826666-P02 315351-P02 P50043 P51008 P50053 P50123 P50223 053120 P51006

Guard, Hinged, Right Top, Master Control Guard, Sheet Metal, Front Die Slot Guard, Sheet Metal, Rear Die Slot Guard, Sheet Metal, Right Bottom, Master Control Guard, Sheet Metal, Right, Idler Rolls Guard, Sheet Metal, Hold Down, Master Control Module Guard, Sheet Metal, Hold Down, W/Switch Mounting, Master Control Module Bracket, Interlock Switch Mounting Plate, Spacer, Interlock Switch Mounting SCW, RD HD SLOT MACH 10-32UNF-2AX1-1/2BLACK NUT, HEX 10-32UNF-2B PLTD SCW, SEMS RD HD PHIL 10-32UNF-2AX1/2 BLACK SCW, RD HD SLOT MACH 8-32UNC-2AX1/2 BLACK SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK Riser Block, 2 Inch Tall, w/Bolts, for 2.5 Slot NUT, HEX 8-32UNC-2B PLTD

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053163-10

DESCRIPTION

Guarding, Master Control Module Doc#: 201



ASSEMBLY: 053182-10

Frames, Dual Print Station


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

2 1 2 1 1 2 2 2 16 4 8 10 1 3 3 4 2

051456 063048-10-P04 315240-P02 405976-1-P02 405977-1-P02 405908-10-P04 600615-1-P02 P32024 P50108 P50130 P54067 P54097 826634-1-P02 P201495 P201493 P50052 P50223

ASM, TIE PLATE 2300 D/C Machined Tiebar Block, Upper Frame, Front, Print Station Frame, Rear, Print Station Plate, Shear, Ink Drawer Spacer, Upper BOLT, LEVEL W/CONE TIP 3/4-16X4-1/2L SCW, SOC HD CAP 3/8-16UNRC-3AX3/4 SCW, SHOULDER 1/2X5/8 PIN, STD DOWEL 3/8X2 PIN, STD DOWEL 3/8X1-1/4 Bracket, Wireway Mounting, 35.9 Inch Wiring Duct, 4 Inch x 3 Inch x 72 Inch Grey Slotted Hole Mounting Cover, Wiring Duct, 4 Inches by 72 Inches, Grey SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 053182-10

Frames, Dual Print Station Doc#: 204


ASSEMBLY: 053191

End Cover and Regulator, Unwind


1 2 3 4 5 6 7

1 1 2 7 1 4 1

826974-P02 052198 090698 P50223 P50052 P51010 P20741

End Cover, Rear, Unwind ASM, MN AIR REG XP5000 LBL, SYMBOL MAIN AIR INLET SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK NUT, HEX 1/4-20UNC-2B PLTD PLUG, HOLE 2.125D

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053191

DESCRIPTION

End Cover and Regulator, Unwind Doc#: 206


ASSEMBLY: 053241

Cover, Rear, Unwind Infeed Pacing


2 3 4 5 7 8 10 11

1 1 1 3 10 6 3 1

827029-P02 827040-P02 827031-P02 P50025 P50223 P50330 P52034 P41379

Cover, Rear, Unwind, Infeed Pacing To Print Station Cover, Rear, Unwind Infeed Pacing Door, Rear, Unwind Infeed Pacing to Print Station SCW, SOC HD CAP 10-32UNRF-3AX3/4 SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK SCW, SHT/MTL PAN HD PH TYPE B #10X1/2 BLACK WSHR, FLAT PLTD #10 7/32X1/2X18GA COUPLER, INSERT FEMALE 3/8 INSERT X 3/8 TUBING BULKHEAD FITTING

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053241

DESCRIPTION

Cover, Rear, Unwind Infeed Pacing Doc#: 208



Nip Roll, Air, 50 Durometer, Exit Pacing


1 2 3 4 6 7 8 9 10 11 12 14

2 1 2 1 2 2 2 2 2 2 4 4

315238 55M060-1 620753 827068-210-P04 95M005 P10003 P31019 P40013 P50042 P50076 P50223 P41040

Block, Nip Roll Nip Roll, 10 Inch 50 Durometer 2-3/16D STANDOFF, AIR CYL NP/RL LP3000 Nip Roll Guard, Exit Pacing, 10 Inch Machine CLEVIS, ROD MODIF BEARING,BALL,3/4 ID,47MM OD,1-7/32 WD, RING, EXT RTNG 1/4 SHAFT CYL, SPCL DBL ACT 3/4BX1" STROKE SCW, SHOULDER 1/4X1/2 SCW, SHOULDER 5/16X5/8 SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK ELBOW, MALE 90 M-B 1/4TX1/8NPT

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM


DESCRIPTION

Nip Roll, Air, 50 Durometer, Exit Pacing Doc#: 210



Nip Roll, Air, 50 Durometer, Pacing


1 2 3 4 6 7 8 9 10 11 12 14

2 1 2 1 2 2 2 2 2 2 4 4

315238 55M060-1 620753 827071-210-P04 95M005 P10003 P31019 P40013 P50042 P50076 P50223 P41040

Block, Nip Roll Nip Roll, 10 Inch 50 Durometer 2-3/16D STANDOFF, AIR CYL NP/RL LP3000 Nip Roll Guard, 10 Inch Machine CLEVIS, ROD MODIF BEARING,BALL,3/4 ID,47MM OD,1-7/32 WD, RING, EXT RTNG 1/4 SHAFT CYL, SPCL DBL ACT 3/4BX1" STROKE SCW, SHOULDER 1/4X1/2 SCW, SHOULDER 5/16X5/8 SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK ELBOW, MALE 90 M-B 1/4TX1/8NPT

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM


DESCRIPTION

Nip Roll, Air, 50 Durometer, Pacing Doc#: 212


ASSEMBLY: 053342-10

Guard, Pinch Point, Print Station


1 2 3 4 5 6 7 8 9 10

1 1 1 1 1 1 1 1 1 1

315444-10-P04 770772 P13061 720806 P52006 P52031 P50068 315398-10-P04 P31020 P52003

Guard, Pinch Point Knob, Pinch Point Guard BEARING,SLEEVE,.502 ID,.628 OD,5/8 WD,FLNG OILITE Spacer, Pinch Point Guard WSHR, FLAT FIBERGLASS .630X.880X.016 WSHR, CURVED SPRNG .531X.795X.0113 SCW, FLAT HD SOC CAP 10-32UNRF-3AX1/2 Guard, Bottom Pinch Point RING, EXT RTNG 3/8 SHAFT WSHR, FLAT FIBERGLASS .380 ID x .630 OD x .032 THK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053342-10

DESCRIPTION

Guard, Pinch Point, Print Station Doc#: 214


ASSEMBLY: 053491

Dancer Pot Assembly Position

SEQ# QTY ITEM DESCRIPTION __________________________________________________________________________________________________________________________________ ________________________________

1 2 3 4 5 6 7 900

1 1 2 2 2 2 2 1

843012-P02 P28152 P50123 P52027 P52113 P51006 P50223 031636

Bracket, Mounting Dancer Pot SENSOR, HALL EFFECT FOR DANCER POSITION SCW, RD HD SLOT MACH 8-32UNC-2AX1/2 BLACK WSHR, FLAT PLTD #8 3/16X7/16X18GA WSHR, SPLT LCK PLTD #8 STL NUT, HEX 8-32UNC-2B PLTD SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK Diagram, Wiring Dancer Sensor Replacement

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 053491

Dancer Pot Assembly Position Doc#: 216


ASSEMBLY: 053548

Continuous Motor, with Clutch Gear

SEQ# QTY ITEM DESCRIPTION ___________________________________________________________________________________________________________________________________________________ _______________

1 2

1 720807 1 130132

3 4 5

1 62M017-3 1 780247 1 P22466-1

6 7 8 9 10 11 12

1 1 3 1 1 4 1

P31021 P50175 P50363 P52005 P20120 P20629 P52004

Spacer, Continuous Motor ASM, IDL/GR HEL HI-PERF 16P 42T LH 24 4' (REF ECO 848)(ECO 2943.2 RPLCS 130132-H STUD, IDL/GR ASM, SPNDL CLUTCH & HEL/GR 29T 16P RH 24 4 Motor, Gear 60:1, 55 Inch Pounds, 25 RPM, 120V Ac 50Hz 60Hz With No Brake (TELCO RING, EXT RTNG 1/2 SHAFT SCW, FLAT HD SOC CAP 3/8-24UNRF-3AX1 SCW, SOC HD CAP 1/4-20UNRC-3AX3-1/4 WSHR, FLAT FIBERGLASS .505X.755X.032 BSHNG, STRAIN RELIEF SR-8P-2 CONN, SETSCREW TYPE (100 PER BOX) WSHR, FLAT FIBERGLASS .505X.755X.016

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 053548

DESCRIPTION

Continuous Motor, with Clutch Gear Doc#: 218


ASSEMBLY: 061815

ASM, GR A/R 1/2SPD STD P/S HELICAL-HG


1 2 3

1 130156-HG 1 130160-HG 2 P50026

GR, A/R DRV HEL HI-GRADE 16DP 42T LH 24DEG 4MIN 1/2SPD GR, A/R DRV HEL HI-GRADE 16DP 28T LH 24DEG 4MIN 1/2SPD SCW, SOC HD CAP 10-32UNRF-3AX1

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 061815

DESCRIPTION

ASM, GR A/R 1/2SPD STD P/S HELICAL-HG Doc#: 220


January 11, 1999 MODIFICATION KIT #595 Modification to Install ½ speed Meter Roll and Analox Roll gears on 4000 press

1. Tools required to install half speed gears A. 1/8” hex Allen wrench B. 3/32” hex Allen wrench 2. Instructions for installing half speed gears: A. Remove existing analox and meter roll gears from the ends of the rolls. Use a 1/8” hex Allen wrench to loosen the set screw. B. Refer to drawing number 020925 for the proper orientation of the half speed gears. C. Install new analox roll gear assembly per the drawing (020925). Line up the large analox gear up with the drive gear on gear box. D. After lining up analox gear assembly with gear box drive gear, tighten the set screw using a 1/8” hex Allen wrench. For web reversing applications the set screw will require a 3/32” hex Allen wrench. E. Install new meter roll gear per the drawing (020925). Line the meter roll gear up with the small gear on the analox gear assembly. F. After lining up the meter roll gear with the analox roll gear, tighten the set screw using a 1/8” hex Allen wrench.

Modification Kit 595 4/11/11 8:42:18 AM - IPB - 1439791 doc#222 - Do Not Scale

February 2, 1999 MODIFICATION KIT #606 Modification to Install ½ speed Meter Roll and Analox Roll gears on 2200 press

1. General Information Caution: There is a potential interference problem between the new metering 1/2 speed gear and the drive side frame. When the meter roll is backed away (dropped down) from the analox roll prior to sliding the ink drawer out from the print station, the gear will become caught on the drive side frame of the print station. It should be noted that the gears for the meter roll and analox roll must be completely disengaged to the point of the meter roll dropping, for this situation to occur. The situation mentioned above can cause damage to the gear which may result in undesirable print quality. To avoid this situation the meter roll must remain engaged with the anilox roll while the drawer is being pulled out of the print station (metering/anilox roll gear set has cleared the drive side frame). Always use caution when sliding the print station drawers in or out of the press, never force the drawer! This same interference issue occurs when you are sliding the drawer back into the print station. Once again, the metering roll must be engaged with the anilox roll prior to sliding the metering/anilox gear set through the frame. If the above scenario is unacceptable, the rear print station frame can be modified to remove a portion of the frame. See the instructions listed below for further information. Mark Andy assumes no liability for any damage that may occur from any of the above mentioned situations. Any questions or comments should be directed to Mark Andy Customer Service Department. Mark Andy, Inc. 18081 Chesterfield Airport Road PO Box 1023 Chesterfield, Missouri 63006-1023 Telephone: 1-800-700-MARK or 636-532-4433 FAX: 636-532-4701 (Technical Service) or FAX: 636-519-3580 (New Product Development) www.markandy.com

2. Tools required to install half speed gears a) b)

1/8” hex Allen wrench 3/32” hex Allen wrench

3. Tools required to make cutout in print station frame bigger: a) b)

Reciprocating Saw Metal file for de-burring

Modification Kit # 606


4. Instructions for installing half speed gears: a) b) c) d)

e) f)

Remove existing analox and meter roll gears from the ends of the rolls. Use a 1/8” hex Allen wrench to loosen the set screw. Refer to drawing number 020925 for the proper orientation of the half speed gears. Install new analox roll gear assembly per the drawing (020925). Line up the large analox gear up with the drive gear on gear box. After lining up analox gear assembly with gear box drive gear, tighten the set screw using a 1/8” hex Allen wrench. For web reversing applications the set screw will require a 3/32” hex Allen wrench. Install new meter roll gear per the drawing (020925). Line the meter roll gear up with the small gear on the analox gear assembly. After lining up the meter roll gear with the analox roll gear, tighten the set screw using a 1/8” hex Allen wrench.

5. Instructions for making print station frame bigger: a) b) c) d) e) f)

Turn off all power to press. Cutout paper template from drawing that has been supplied (460030). Line up paper template with cutout on rear print station frame. Make sure that there are no electrical conduits or air lines in the cutting path. Use a reciprocating saw to cut the frame, using the paper template as a guide. After cutting the frame use a metal file to remove/de-burr any rough edges.

Mark Andy, Inc. assumes no liability for any damage that may occur from the above mentioned instructions.

Modification Kit # 606


ASSEMBLY: 062365-01

ASM, RESISTOR DRV DYB 6.80 OHM 2400W


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 062365-01

DESCRIPTION

ASM, RESISTOR DRV DYB 6.80 OHM 2400W Doc#: 224


ASSEMBLY: 062448-04

ASM, CNTCTR W/SUP 3PH 600VAC 65A IND 80A RES COIL 110VAC 50/60HZ


1 2

1 P212124-04 1 P211480-01

CNTCTR, 3PH 600VAC 65A IND 80A RES COIL 110VAC 50/60HZ SUPPRESSOR, RC 50-127V SCW TRMNL UPTO LCD80

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 062448-04

DESCRIPTION

ASM, CNTCTR W/SUP 3PH 600VAC 65A IND 80A RES COIL 110VAC 50/60HZ Doc#: 226


ASSEMBLY: 062562-10

ASM, I/F PAC/RL W/BRNGS 10"MACH


1

1 570811-10

2 3

1 P10153-001 1 P10224

Infeed Pacing Roll, High Friction Coating, 2.899/2.901 Diameter Smooth 10 Inch BEARING,BALL,30MM ID,62MM OD,16MM WD,SNGL ROW BEARING,BALL,65MM ID,120MM OD,23MM WD,W/RING

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 062562-10

DESCRIPTION

ASM, I/F PAC/RL W/BRNGS 10"MACH Doc#: 228


ASSEMBLY: 062652-P02

ASM, W/W/U C/P 2200G SYMBOL


1 2 3 4 5 6 8 10 12 13 14 15 16 17 18 19 20 21 22 9999

1 1 1 2 2 2 2 8 8 2 2 8 4 5 2 1 2 1 1 0

825201-P02 821941-P02 091007 P40022 P40557 P40027 P50053 P41040 P41035 P41042 P40557-1 P41405 P41070 P40620-2 P20109 P41188 P20245 P59049 P41003 DWG-WIRESUB-ELEC-BENCH-LABELS

ENCL, W/W/U C/P 2200G, POWDER COAT MA LIGHT GREY CVR, W/W/U C/P 2200G LBL, SYMBOL C/P W/W/U 2200 GAUGE, PNL MNT 60# Regulator, Air Miniature, 0-125 PSI W/Low Switch, Pneumatic Toggle 3 Way SCW, SEMS RD HD PHIL 10-32UNF-2AX1/2 BLACK ELBOW, MALE 90 M-B 1/4TX1/8NPT UNION, ELBOW M-B 1/4"TUBE BR ELBOW, FEMALE 90 M-B 1/4TX1/8FPT Nut, Mount, For Air Regulator, 1-3/16-18 UNEF-2B Fitting, Pneumatic Male 1/4 Inch Bart to 10-32 Npt With Gasket Fitting, Pneumatic Elbow Adjustable Male 10-32 To Female With Gasket TUBE, CLEAR POLYURETHANE 1/4OD X .045 WALL 180 PSI Nut, Pneumatic Toggle Switch Decorative INSERT, COUPLER 1/4 INSERT 1/4-OD TUBE BSHNG, HOLE 7/8" BLACK BTN, PLUG 7/8 Fitting, Pneumatic Tee Male 1/4 Inch Barb Sub-Electrical-Bench Label

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 062652-P02

DESCRIPTION

ASM, W/W/U C/P 2200G SYMBOL Doc#: 230


ASSEMBLY: 062734-10

Doctor Blade Holder, W/4 Blades


1 6

1 062734-10R 4 P42090-10

Doctor Blade Holder, W/O Blades BLD, DR 1.50 X.006X10.50 SUPERHONE GOLD

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 062734-10

Doctor Blade Holder, W/4 Blades Doc#: 232


ASSEMBLY: 062849-1

ASM, GR/BX W/O UPR LFT LEG W/REG


1 6 7 8 9 12 13 16 18 19 22 25 26 27 30 32 38 43 44 45 48 49 51 52 54 57 58 60 61

1 1 2 2 2 1 1 1 2 1 1 1 1 10 1 8 1 2 2 2 1 4 2 1 1 1 2 1 2

290168-1 630832 P17020 P09002 P09001 720573-1 75M002 160116 P12007 P12003 77M028 71M010 P17007 P50027 73M005 P50024 63M113 P17011 P09004 P09003 160125 P50078 841972-1 71M011 P17008 630836 P17003 160018 P55027

GR/BX, W/O UPR LFT LEG W/REG Shaft, Line Keyed SEAL, OIL 3/4X1-1/2 BEARING,TAPERED ROLLER CUP,3/4 ID,1-15/16 OD,, BEARING,TAPERED ROLLER CONE,3/4 ID,2 OD,3/4 WD, SLEEVE, STOP SPRNG, COMP SPCL DWG HELICAL GEAR,ASM,12 T,8 DP,RH,1.125 FW,7/8 B,HDN,HG,DRV P BEARING,THRUST WASHER,1 ID,1-1/2 OD,1/16 THK, BEARING,THRUST BEARING,7/8 ID,1-11/16 OD,5/64 THK,NTC-1427 GR, HEL R/R NUT 30T CRTG, THDD 1-1/4 - 12 THDS UNF O-RING, 1/8X3 SCW, SOC HD CAP 1/4-28UNRF-3AX3/4 RETAINER, BRNG SCW, SOC HD CAP 10-32UNRF-3AX5/8 Shaft, Output Fanfolder Drive SEAL, OIL 1-1/8X1-5/8 BEARING,TAPERED ROLLER CUP,25.4MM ID,62MM OD,19.05MM WD, BEARING,TAPERED ROLLER CONE,30MM ID,61.912MM OD,19.05MM WD, HELICAL GEAR,,32 T,8 DP,RH,0.755 FW,1-1/2B,HG,,GR/BX SCW, HEX HD CAP GRD 8 1/4-28UNF-2AX.75 BLACK CLIP, GR BOLT LOCKING 2200E CRTG, BRNG O-RING, 1/8X4-1/2 SHAFT, REG DR (SQ KEY) 7/16"DX7"L O-RING, 1/16X7/16 HELICAL GEAR,,10 T,16.9706 DP,RH,1.130 FW,7/16 B,,HG,REG KEY, SOFT CHAM SQ 3/32X1/2

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 062849-1

DESCRIPTION

ASM, GR/BX W/O UPR LFT LEG W/REG Doc#: 234

ASSEMBLY: 062849-1

ASM, GR/BX W/O UPR LFT LEG W/REG


62 64 65 66 68 69 70 74 76 77 78 80 81 82 84 85 87 89 90 91 92 990

1 3 1 1 1 1 1 1 1 1 4 1 1 4 1 1 1 2 1 1 3 0

P53008 P52054 P39011 P41013 P54028 29M010 P39017 72M055 P41107 P41122 72M046-1 72M046-5 72M046-7 72M047-1 72M047-5 72M047-7 780420 P53030 P59240 P55047 P31093 SPEC-002

SCW, CUP PT SOC SET 10-32UNRF-3AX.25 WSHR, FLAT FIBERGLASS .442X.620X.032 GAUGE, OIL PLUG, ST SQ HD PIPE 1/4MPT PIN, STD DOWEL 1/4X1 CVR, GR/BX PLUG, VENT Gasket, Gear Box Cover NIPPLE, 2" 1/2NPT REDUCER, BLACK PIPE 1/2 NPT TO 1/8 NPT SHIM, PLASTIC 3"D BLUE .005 SHIM, PLASTIC 3"D YELLOW .020 SHIM, PLASTIC 3"D RED .002 SHIM, PLASTIC 5-1/2D BLUE .005 SHIM, PLASTIC 5-1/2D YELLOW .020 SHIM, PLASTIC 5-1/2D RED .002 WHEEL, DETENT NO HUB SCW, KNURL CUP PT SOC SET 10-32UNRF-3AX.125 PLUNGER, SPRNG BALL 3/8-16X5/8 MED PRESS Key, Woodruff #19 3/16X1-1/4 Hardened (Sold in Packs of 10) RING, EXT RTNG 7/16 SHAFT CHARLIE SPEC SHT, USAGE OF PINS IN GR/BXES

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 062849-1

DESCRIPTION

ASM, GR/BX W/O UPR LFT LEG W/REG Doc#: 234



ASSEMBLY: 062850-1

ASM, GR/BX W/O UPR LFT LEG W/PULLEY


1 2 3 4 5 6 7

1 1 1 1 1 1 1

062849-1 220302 P52054 P55027 P53004 P50017 P52129

ASM, GR/BX W/O UPR LFT LEG W/REG PULLEY, INJ MOLDED R/R (SQ KEY) 12T L BELT 7/16B WSHR, FLAT FIBERGLASS .442X.620X.032 KEY, SOFT CHAM SQ 3/32X1/2 SCW, CUP PT SOC SET 1/4-20UNRC-3AX.187 SCW, SOC HD CAP 10-32UNRF-3AX3/8 WSHR, FENDER PLTD 3/16X3/4X18GA

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 062850-1

DESCRIPTION

ASM, GR/BX W/O UPR LFT LEG W/PULLEY Doc#: 237


ASSEMBLY: 062918-210-P02

Dancer Arm and Pivot Shaft, Unwind, 10 Inch Machine


1 2 3

1 630849-11 1 312537-100 2 P54068

Dancer Shaft, Pivot, Unwind, 20.000 Inch Length CASTING, DANCER ARM 10" MACH PIN, STD TAPER #3X2

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 062918-210-P02

DESCRIPTION

Dancer Arm and Pivot Shaft, Unwind, 10 Inch Machine Doc#: 239


ASSEMBLY: 063048-1

Machine , Rewind, Cantilevered

SEQ# QTY ITEM DESCRIPTION ___________________________________________________________________________________________________________________________________________ _______________________

1 2 3 4 5

1 1 1 5 5

315259-P04 405670-10-P04 830148-1-P04 P50109 P52033

Machine Plate Machine Platform Plate Machine Base, Rewind, Cantilevered SCW, SOC HD CAP 3/8-16UNRC-3AX1 WSHR, FLAT 13/32X13/16X16GA

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063048-1

DESCRIPTION

Machine , Rewind, Cantilevered Doc#: 241


ASSEMBLY: 063048-10-P04

Machined


1 2 3 4 5

1 1 1 5 5

315259-P04 405670-10-P04 830148-10-P04 P50109 P52033

Machine Plate Machine Platform Plate Machine Base SCW, SOC HD CAP 3/8-16UNRC-3AX1 WSHR, FLAT 13/32X13/16X16GA

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 063048-10-P04

Machined Doc#: 243


ASSEMBLY: 063048-110-P04

Machined , Unwind, Cantilevered

SEQ# QTY ITEM DESCRIPTION ________________________________________________________________________________________________________________________________________________________________

1 2 3 4 5

1 1 1 5 5

315259-P04 405670-10-P04 830148-10-P04 P50109 P52033

Machine Plate Machine Platform Plate Machine Base SCW, SOC HD CAP 3/8-16UNRC-3AX1 WSHR, FLAT 13/32X13/16X16GA

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063048-110-P04

DESCRIPTION

Machined , Unwind, Cantilevered Doc#: 245

__


ASSEMBLY: 063060-10

Ink Station, Slide Out Cassette


1 2 3 4 5 6 7

1 2 1 1 1 1 4

063083-10 405663 P54048 311471 P50083 P56064 P50025

Ink Station, Basic Rail, V Track Short PIN, SLOTTED SPRNG 1/8X1 LATCH, TRAVEL LIMITER INK STA SCW, SHOULDER 1/4X5/8 SPRNG, TORSION .366ODX.032X.2MW PLTD SCW, SOC HD CAP 10-32UNRF-3AX3/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 063060-10

Ink Station, Slide Out Cassette Doc#: 247


ASSEMBLY: 063071-10

Ink Fountain, Spacer and Latch


1 2

1 315298 1 315299-10-P04

Ink Fountain Latch, Ink Station Spacer, Ink Fountain

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063071-10

DESCRIPTION

Ink Fountain, Spacer and Latch Doc#: 249


ASSEMBLY: 063083-10

Ink Station, Basic


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 1 2 1 1 1 1 2 2 1 1 1 1 1 1 2

405659-P04 405660-P04 600815-10 063071-10 311892 311401 311402 311004 770770 330631 330632 800282-10 841955-1 330611-1 330611-2 330333

17 18 19 20 21 22 23 24 25 26 27

1 1 1 2 2 11 4 2 1 2 2

841304-10 P34097 P34001 P56072 P50024 P50025 P50026 P50045 P50134 P52034 P52041

Frame, Ink Station Front Frame, Ink Station Rear Spacer, Drawer Ink Station Ink Fountain, Spacer and Latch BLK, INK RL PRESS 2200 Block, Ink Roll Press Front Doctor Blade BLK, NEST SPCR DR/BLD 2200 BLK, MTR/RL ADJ P/S DELTA/2200 Adjusting Screw, Meter Roll 5/16-24 x 2.1875 Length Nest, Ink Roll Doctor Blade Front W/Notch Nest, Ink Roll Doctor Blade Rear W/Notch Ink Pan, W/20 Degree Drain BRKT, INK FTN SPT INK STA 2200-10E WIPER, FRONT 2200/4150/SCOUT WIPER, REAR 2200/4150/SCOUT PAD, WIPER 2.2 POLY LAM 2200/4150/4200 STD "NO SUBSTITUTES" FOR MATERIAL ASM, DRIP PAN INK STA 2200-10" HOSE, DRAIN SOFT IND 13/16IDX1/16WALLX36"L CLAMP, HOSE IDEAL 5008 RANGE 7/16" TO 1" SPRNG, GRND END COMP .48X.067X7/8LG MW PLTD SCW, SOC HD CAP 10-32UNRF-3AX5/8 SCW, SOC HD CAP 10-32UNRF-3AX3/4 SCW, SOC HD CAP 10-32UNRF-3AX1 SCW, SOC HD CAP 10-32UNRF-3AX1/2 SCW, SOC HD CAP 10-32UNRF-3AX1-1/4 WSHR, FLAT PLTD #10 7/32X1/2X18GA WSHR, FLAT PLTD 11/32X11/16X16GA (FOR COMCO APPLICATIONS, REPLACES WF25)

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 063083-10

Ink Station, Basic Doc#: 251

ASSEMBLY: 063083-10

Ink Station, Basic


28 29

2 P52082 3 P59254

WSHR, FLAT STL(.03THK) .376IDX.505OD PLUNGER, SPRNG -BALL 1/4-20X17/32

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 063083-10

Ink Station, Basic Doc#: 251



ASSEMBLY: 063084-10

Machine , Master Control Module


1 2 3 4 5 6

1 1 1 6 6 1

315259-P04 405670-10-P04 830149-10-P04 P50109 P52033 315321-P04

Machine Plate Machine Platform Plate Machined Base, Master Control SCW, SOC HD CAP 3/8-16UNRC-3AX1 WSHR, FLAT 13/32X13/16X16GA Machine Plate, Power Pack Mounting

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063084-10

DESCRIPTION

Machine , Master Control Module Doc#: 254


ASSEMBLY: 063139

Gear Box Assembly W/O Upper Right Leg, W/Registry


1 6 7 8 9 12 13 16 18 19 22 25 26 27 30 32 38 43 44 45 48 49 51 52 54 57 58 60 61

1 1 2 2 2 1 1 1 2 1 1 1 1 10 1 8 1 1 2 2 1 4 2 1 1 1 2 1 2

290168-2 630832 P17020 P09002 P09001 720573-1 75M002 160116 P12007 P12003 77M028 71M010 P17007 P50027 73M005 P50024 630600-1 P17011 P09004 P09003 160125 P50078 841972-1 71M012 P17008 630881 P17003 160018 P55027

GR/BX, W/O UPR RT LEG W/REG Shaft, Line Keyed SEAL, OIL 3/4X1-1/2 BEARING,TAPERED ROLLER CUP,3/4 ID,1-15/16 OD,, BEARING,TAPERED ROLLER CONE,3/4 ID,2 OD,3/4 WD, SLEEVE, STOP SPRNG, COMP SPCL DWG HELICAL GEAR,ASM,12 T,8 DP,RH,1.125 FW,7/8 B,HDN,HG,DRV P BEARING,THRUST WASHER,1 ID,1-1/2 OD,1/16 THK, BEARING,THRUST BEARING,7/8 ID,1-11/16 OD,5/64 THK,NTC-1427 GR, HEL R/R NUT 30T CRTG, THDD 1-1/4 - 12 THDS UNF O-RING, 1/8X3 SCW, SOC HD CAP 1/4-28UNRF-3AX3/4 RETAINER, BRNG SCW, SOC HD CAP 10-32UNRF-3AX5/8 Shaft, Output Print Station SEAL, OIL 1-1/8X1-5/8 BEARING,TAPERED ROLLER CUP,25.4MM ID,62MM OD,19.05MM WD, BEARING,TAPERED ROLLER CONE,30MM ID,61.912MM OD,19.05MM WD, HELICAL GEAR,,32 T,8 DP,RH,0.755 FW,1-1/2B,HG,,GR/BX SCW, HEX HD CAP GRD 8 1/4-28UNF-2AX.75 BLACK CLIP, GR BOLT LOCKING 2200E CRTG, BRNG O-RING, 1/8X4-1/2 Shaft, Registry Drive O-RING, 1/16X7/16 HELICAL GEAR,,10 T,16.9706 DP,RH,1.130 FW,7/16 B,,HG,REG KEY, SOFT CHAM SQ 3/32X1/2

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063139

DESCRIPTION

Gear Box Assembly W/O Upper Right Leg, W/Registry Doc#: 256

ASSEMBLY: 063139

Gear Box Assembly W/O Upper Right Leg, W/Registry


62 64 65 66 68 69 70 74 76 77 78 80 81 82 84 85 87 89 90 91 92 990

1 2 1 1 2 1 1 1 1 1 4 1 1 4 1 1 1 2 1 1 2 0

P53008 P52054 P39011 P41013 P54028 29M010 P39017 72M055 P41107 P41122 72M046-1 72M046-5 72M046-7 72M047-1 72M047-5 72M047-7 780420 P53030 P59240 P55047 P31093 SPEC-002

SCW, CUP PT SOC SET 10-32UNRF-3AX.25 WSHR, FLAT FIBERGLASS .442X.620X.032 GAUGE, OIL PLUG, ST SQ HD PIPE 1/4MPT PIN, STD DOWEL 1/4X1 CVR, GR/BX PLUG, VENT Gasket, Gear Box Cover NIPPLE, 2" 1/2NPT REDUCER, BLACK PIPE 1/2 NPT TO 1/8 NPT SHIM, PLASTIC 3"D BLUE .005 SHIM, PLASTIC 3"D YELLOW .020 SHIM, PLASTIC 3"D RED .002 SHIM, PLASTIC 5-1/2D BLUE .005 SHIM, PLASTIC 5-1/2D YELLOW .020 SHIM, PLASTIC 5-1/2D RED .002 WHEEL, DETENT NO HUB SCW, KNURL CUP PT SOC SET 10-32UNRF-3AX.125 PLUNGER, SPRNG BALL 3/8-16X5/8 MED PRESS Key, Woodruff #19 3/16X1-1/4 Hardened (Sold in Packs of 10) RING, EXT RTNG 7/16 SHAFT CHARLIE SPEC SHT, USAGE OF PINS IN GR/BXES

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063139

DESCRIPTION

Gear Box Assembly W/O Upper Right Leg, W/Registry Doc#: 256



ASSEMBLY: 063152-10

Rewind Frames, Lower Single Cantilevered, 40 Inch Capacity


1 2 3 4 5 6 7 12 14 16 18

1 1 2 1 1 1 1 1 1 14 4

063048-110-P04 405687-10-P02 051456 405816-P02 405817-P02 405937 600615-1-P02 P20117 P32024 P50109 P54097

Machined , Unwind, Cantilevered Shear Plate ASM, TIE PLATE 2300 D/C Rewind Frame, Front, Lower, Single Cantilevered Rewind Frame, Rear, Lower, Single Cantilevered Mounting Plate, Rewind Motor, Single Cantilevered Spacer, Upper BSHNG, HOLE 7/8"D BOLT, LEVEL W/CONE TIP 3/4-16X4-1/2L SCW, SOC HD CAP 3/8-16UNRC-3AX1 PIN, STD DOWEL 3/8X1-1/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063152-10

DESCRIPTION

Rewind Frames, Lower Single Cantilevered, 40 Inch Capacity Doc#: 259


ASSEMBLY: 063157-10

Tractor, Hold Down, 2-1/2 Slot


1 2 3 4 5 6 7

2 2 2 2 4 4 4

390867 391866 620410 610531-2 P11112 P31019 P50312

WIPER, BRNG Yoke, Bearing Mounting Assembly PIN, HOLD DOWN TIE 2-1/2S D/C WIDTH SHAFT, YOKE MNTG ADJ DIE PRESS 16.00"L BEARING,YOKE,15MM ID,42MM OD,19MM WD,TYPE TRK RING, EXT RTNG 1/4 SHAFT SCW, SOC HD CAP 10-32UNRFX2 ST/STL

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 063157-10

Tractor, Hold Down, 2-1/2 Slot Doc#: 261


ASSEMBLY: 063172



0 0 1 2 3 4 5 6 7 8 9 10 11 12 13

1 1 1 1 1 1 1 1 2 1 1 1 1 1 1

14 15 16 17 18 19 20 21 22 23 24 25 26

1 4 1 4 2 12 2 4 10 7 1 4 4

021099 031537 090686 091115 826794-P02 826795-P02 826639 826641-P02 P20109 P201388-1 P201388 P20965-001 P40027 P40028 P40708 P41042 P41070 P41185 P41405 P50045 P50052 P50134 P50223 P50311 P51008 P52033 P52034 P52052

Schematic, Pneumatic Main Press 2200H Diagram, Electrical Connection 2200H All Voltages LBL, SYMBOL AIR OUTPUT ACC (15 PER SHT) Label, Master Control Enclosure, Control , Master Control Cover, Control , Master Control Face Plate, Control , Master Control , Removable, Control , Master Control Nut, Pneumatic Toggle Switch Decorative GRIP, KEL 24/10 10POS FRM GRIP, KEL 24/10 10 POS BASE RAIL, DIN 35MM (78" PC ISSUED IN IN'S) Switch, Pneumatic Toggle 3 Way VALVE, 4 WAY Regulator & Gauge, ARG20 Relieving Type, 0-60 PSI, Dual PSI & Bar Label, 225 Deg ELBOW, FEMALE 90 M-B 1/4TX1/8FPT Fitting, Pneumatic Elbow Adjustable Male 10-32 To Female With Gasket COUPLER, BDY1/4INSERT 1/8NMPT Fitting, Pneumatic Male 1/4 Inch Bart to 10-32 Npt With Gasket SCW, SOC HD CAP 10-32UNRF-3AX1/2 SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK SCW, SOC HD CAP 10-32UNRF-3AX1-1/4 SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK SCW, BTN HD SOC CAP 8-32UNRCX.25 ST/STL NUT, HEX 10-32UNF-2B PLTD WSHR, FLAT 13/32X13/16X16GA WSHR, FLAT PLTD #10 7/32X1/2X18GA WSHR, SPLIT LCK PLTD 1/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063172

DESCRIPTION

Master Station, Control Main Doc#: 263

ASSEMBLY: 063172



27 28 29 30 31 32 34 35 38 39 9999

1 1 1 1 1 1 1 4 4 1 0

P52066 P26055 P99010-01 071341 P211678 P20445 P201388-13 P201388-05 P201388-06 P201388-03 DWG-WIRESUB-ELEC-BENCH-LABELS

WSHR, FLAT FIBERGLASS .380X.630X.016 GROMMET STRIP, FLEX .053/.085 Master Control, Components Single Rewind Harness, Control Cable Master Control to Power Pack SWITCH, PRESSURE ADJUSTABLE BSHNG, HOLE 1-1/4 Grommet, Cable Insert .59-.63 HDC KT 15 GRIP, KEL HDC-KT-6 INSERT 0.24-0.28DIA GRIP, KEL HDC-BTK INSERT BLNK PLUG GRIP, KEL HDC-KT-4/5 INSERT 4X0.20DIA Sub-Electrical-Bench Label

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063172

DESCRIPTION

Master Station, Control Main Doc#: 263



ASSEMBLY: 063195

Power Pack, Inverter Drive and Controls, for All Voltages


1 2 3 5 6 7 8 9 10 11 12 13 14 15 21 27 32 33 34 35 36 37 40 41 42 43 44 45 46

1 1 1 1 1 1 10 10 10 10 10 1 1 1 1 70 11 13 21 4 2 8 4 1 3 4 49 4 30

P201480-P02 826598-P02 P201290 091126 090919 P211575 P20959-001 P20952-001 P20959-002 P20952-002 P20965-001 900664 900976 P29002 P201340 P50054 P50078 P52030 P52052 P50036 P50077 P52053 P57043 P20221 P20278 P20223 P20951-009 P20951-002 P20951-011

Enclosure, Power Pack without Feet 60x48x12 with Holes and Painted , Power Pack with Holes and Painted HNDL, PISTOL FR 100A FUSED DISC Label, Power Pack Hour Meter With Power Indicator LBL, 75DEG C COPPER CONDUCTORS, UL LISTED METER, ELAPSED TIME FREQUENCY INDEPENDENT DUCT, WIRING 1"X3" WHITE DUCT, COVER 1 IN WHITE DUCT, WIRING 2"X3" WHITE DUCT, COVER 2 IN WHITE RAIL, DIN 35MM (78" PC ISSUED IN IN'S) XFMR, 5KVA MODIF FR 2200F PWR ENCL Transformer, 2KVA Export Modified SUPRESSOR, ARC V150LA10A BLK, GND DIST 1PL 1IN 400MCM-6AWG 6LD 2-14AWG SCW, SEMS RD HD PHIL 10-32UNF-2AX3/4 BLACK SCW, HEX HD CAP GRD 8 1/4-28UNF-2AX.75 BLACK WSHR, FLAT PLTD 9/32X5/8X16GA WSHR, SPLIT LCK PLTD 1/4 SCW, HEX HD CAP GRD 8 3/8-24UNF-2AX1.00BLACK SCW, HEX HD CAP GRD 8 1/4-28UNF-2AX1.00BLACK WSHR, SPLIT LCK PLTD 3/8 RIVET, POP SHORT 1/8"D ST/STL TRMNL, RING INSUL 16/14 WIRE #10 SCW MNT, CABLE TRMNL, MIN SPRNG SPADE 16/14 WIRE #6 SCW SPL WIRE, THHN 133/29 STRANDS AWG-8 BLACK WIRE, THHN STRNDD 600V AWG-2 BLACK WIRE, THHN 133/29 STRANDS AWG-8 GN/YEL STRIPE

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063195

DESCRIPTION

Power Pack, Inverter Drive and Controls, for All Voltages Doc#: 266

ASSEMBLY: 063195



49 50 57 58 59 60 62 63 67 69 70 71 73 74 77 78 79 80 81 82 83 84 85 87 88 93 96 97 100

2 8 1 1 1 5 1 1 1 2 12 12 1 1 1 1 1 1 1 1 1 1 2 1

P212001 P50027 P20877-001 P20878 P20879 P50048 P20881 090685 P20074 P20093 P50125 P52051 SPEC-016 090770 071340 P99002 P212079-1 P212080-1 P21071 P20054 P201278 052189 P201130 071240-15

1 P201510-02 1 7 8 1

P20073 P51022 P51014 071236-1

GROMMET, FR 2200PWR/PK 1-1/2X1X1/2THK SCW, SOC HD CAP 1/4-28UNRF-3AX3/4 LABEL, WARNING 1.5H ELEC SHOCK LBL, LETTER P 1"HIGH SELF ADHV BLACK LBL, LETTER E 1"HIGH SELF ADHV BLACK SCW, RD HD SLOT MACH 6-32UNC-2AX1/2 BLACK LBL, ID ELEC GRND SYM 3/4D GENERIC LBL, SYMBOL MAIN PWR SW RTCL, 3 PIN RND #16 SOCKET PNL MNT ASM, CAP & CHAIN SCW, RD HD SLOT MACH 4-40UNC-2AX1/2 BLACK WSHR, EXT TOOTH LCK #4 TYPE A PLTD SPEC SHT, CLOSING PWR/PK DOORS LBL, UV ENGRAVED Harness, Contral Cable Power Pack to Master Control Electrical Components, For Power Pack, Basic Controls All Voltages FAN, COOLING PKG 6IN 115V 50/60HZ 140 CFM - REPLACES COMCO FN1003 GRILLE, EXHAUST PKG 6INCH RTCL, DUPLEX 15AMP 120V BOX, HANDY 2X4X2-1/8 CVR, SINGLE-GANG DUPLEX RCTTCL WATERPROOF OUTLET 2300 Cord Grip, Multiple Gland, 10 Positions BUSHING, SNAP 2" Harness, Power Single Ended Female, 15 Feet Length, 120V Ac 15 Amperes Cable, Brad Power, 5 Meters Long, Female Single Ended Drop 3 Position Connector, RTCL, 4 PIN NUT, RIV 10-32 NUT, HEX 4-40UNC-2B PLTD Harness, Unwind Speed Sensor to Power Pack, 20 Foot Length

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063195

DESCRIPTION


ASSEMBLY: 063195



104 105 106 107 108 109 110 111 112 113 114 115 117 118 121 122 123 124 126

3 2 2 5 1 2 1 1 1 2 1 1 8 6 1 2 1 1 1

P51043 P50056 P51104-1 P51100-2 P20633 P201248 P28037 P201388-03 P201388-09 P201388-04 P201388-08 P20600 P27026 P201509 P201388-12 P201388-06 P201388-13 P201388-05 071371-15

990 991

1 021107 3 P201525

NUT, HEX JAM ST/STL 6-32UNC-2B SCW, BTN HD SOC CAP 8-32UNRC-3AX.38 NUT, SELF-CLINCHING 3/8-16-1 (12GA) NUT, SELF-CLINCHING 1/4-28-2 (12GA) RTCL, 38 PIN G2B22-38PNE MOV, SURGE ABSORBER 26VDC RESISTOR, 1.5K .25W 5% GRIP, KEL HDC-KT-4/5 INSERT 4X0.20DIA GROMMET, CBL INSERT .47-.51 HDC-KT-12 GRIP, KEL HDC-KT 14 INSERT 0.55-0.59DIA Grommet, Cable Insert .35-.39HDC-KT-9 CAP, DUST 35-PIN RTCL PIN, TRMNL MALE 16GA SM16M-1TK6 Tubing, 1/4"Heat Shrink Green With Yellow Stripe GRIP, KEL HDC-KT-2/6 INSERT 2 X 0.24DIA GRIP, KEL HDC-BTK INSERT BLNK PLUG Grommet, Cable Insert .59-.63 HDC KT 15 GRIP, KEL HDC-KT-6 INSERT 0.24-0.28DIA Harness, Unwind Power Ended Female 180 Inches 14/3 for 24V Dc Power Supply Cable Layout Diagram, Rear Power Enclosure 2200H Terminal, Spade 16-22 Wire #10 Screw

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063195

DESCRIPTION




ASSEMBLY: 063206-10-P02

Straddle Block, W/Die Pressure Screws for 2.5 Slot, 10 Inch


1 2 3 4 5 6

1 2 2 2 2 2

390798-P02 77M046 770781 770224 P54055 P52055

BLK, STRDL 10" 1"BRR 4150C 2-1/2S3/4FRM Adjustment Screw and Bearing Assembly, 1/2-20x14.25 Long Nut, Knurled Lock Die Pressure Adjust Bar, Threaded Adjust Machined Die Pressure PIN, SLOTTED SPRNG 1/8X3/4 WSHR, FLAT 1-1/16ODX1/2IDX3/32THK HVY

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063206-10-P02

DESCRIPTION

Straddle Block, W/Die Pressure Screws for 2.5 Slot, 10 Inch Doc#: 269


ASSEMBLY: 063241-10

Frames, Master Control & Sheeting Module


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 21 22 23 24 25 26 27 28 29 30

2 1 1 1 3 4 2 1 1 6 21 4 6 1 1 4 1 1 4 4 1 1 3 3 6 4 1 1 1

063084-10 405952-1-P02 405953-1-P02 405687-10-P02 600615-1-P02 311726-1-P02 39M0482 72M010-4-P02 72M010-5-P02 P54097 P50109 P50174 P52030 P50260 P50610 P32024 052834 620421-2-P02 P52052 P50265 826640-P02 826634-1-P02 P201495 P201493 P50223 P50052 842118 900659 842911-P02

Machine , Master Control Module Frame, Rear, Master Control Module, W/2.5 Inch Slot Frame, Front, Master Control Module, W/2.5 Inch Slots Shear Plate Spacer, Upper BLK, MNTG STRDL BLK 2300 ASM, BRR/WPR SPCR, 3/4"X 1.187L BRR/WPR 4150C SPCR, 3/4"D X 1.656L BRR/WPR PIN, STD DOWEL 3/8X1-1/4 SCW, SOC HD CAP 3/8-16UNRC-3AX1 SCW, SOC HD CAP 1/4-20UNRC-3AX3/4 WSHR, FLAT PLTD 9/32X5/8X16GA SCW, HEX HD CAP GRD 8 1/4-20UNC-2AX2.5 BLACK Screw, Hex Head Cap Grade 8 1/4-20UNC-2Ax2.00 Black BOLT, LEVEL W/CONE TIP 3/4-16X4-1/2L Nip Guard STANDOFF, HEX 1-1/2" 30" LONG 2300 M/C WSHR, SPLIT LCK PLTD 1/4 SCW, HEX HD CAP GRD 8 1/4-20UNC-2AX.75 BLACK Mounting Bracket, Control , Master Control Bracket, Wireway Mounting, 35.9 Inch Wiring Duct, 4 Inch x 3 Inch x 72 Inch Grey Slotted Hole Mounting Cover, Wiring Duct, 4 Inches by 72 Inches, Grey SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK Bracket, Proximity Switch ASM, SPD SNSR W/CONN Tray, Electrical Cable, Main Power Enclosure

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063241-10

DESCRIPTION

Frames, Master Control & Sheeting Module Doc#: 271

ASSEMBLY: 063241-10

Frames, Master Control & Sheeting Module


31 33 34 35 36 37 38 39 40 41

1 3 1 2 1 1 4 1 1 1

842817-1-P02 P52033 311721-P02 P50161 P39055 P39021 P34027 P59240 P52034 P50045

Bracket, Rear Deck Sheet Metal WSHR, FLAT 13/32X13/16X16GA MNFLD, LUBE D/C STA 2 FITTING 4150C SCW, SOC HD CAP 1/4-20UNRC-3AX1 FITTING, LUBE 90 DEG 1/8 NPT CONN, MALE 10-32UNF TO 1/8TUBE TUBE, NYLON 1/8 O.D. X .022 WALL PLUNGER, SPRNG BALL 3/8-16X5/8 MED PRESS WSHR, FLAT PLTD #10 7/32X1/2X18GA SCW, SOC HD CAP 10-32UNRF-3AX1/2

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063241-10

DESCRIPTION

Frames, Master Control & Sheeting Module Doc#: 271


ASSEMBLY: 063939-10

Frames, Diecut, 2 Slot, 2-1/2 Inch, 10 Inch Machine


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 23 24 25 26 27 34 35 36

1 1 1 1 2 8 2 2 4 2 8 2 1 4 14 8 4 2 6 8 2 1 3 3 4 3 1 2 2

405967-1-P02 405968-1-P02 405687-10-P02 063048-10-P04 051456 311726-1-P02 315240-P02 72M010-5-P02 72M010-4-P02 72M010-9-P02 39M0482 P32024 842817-P02 P54097 P50109 P50174 P50130 P50260 P50610 P52030 P50223 826634-1-P02 P201495 P201493 P50052 600615-1-P02 311721-P02 P50161 P39055

Diecut Frame,2 Slot, Front W/Bearings Diecut Frame, 2 Slot, Rear W/Bearings Shear Plate Machined ASM, TIE PLATE 2300 D/C BLK, MNTG STRDL BLK 2300 Tiebar Block, Upper SPCR, 3/4"D X 1.656L BRR/WPR SPCR, 3/4"X 1.187L BRR/WPR 4150C SPCR, 3/4'DX1.470L BRR/WPR SPCL ASM, BRR/WPR BOLT, LEVEL W/CONE TIP 3/4-16X4-1/2L BRKT, R DECK SHT/MTL SPT 2200X P/S PIN, STD DOWEL 3/8X1-1/4 SCW, SOC HD CAP 3/8-16UNRC-3AX1 SCW, SOC HD CAP 1/4-20UNRC-3AX3/4 SCW, SHOULDER 1/2X5/8 SCW, HEX HD CAP GRD 8 1/4-20UNC-2AX2.5 BLACK Screw, Hex Head Cap Grade 8 1/4-20UNC-2Ax2.00 Black WSHR, FLAT PLTD 9/32X5/8X16GA SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK Bracket, Wireway Mounting, 35.9 Inch Wiring Duct, 4 Inch x 3 Inch x 72 Inch Grey Slotted Hole Mounting Cover, Wiring Duct, 4 Inches by 72 Inches, Grey SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK Spacer, Upper MNFLD, LUBE D/C STA 2 FITTING 4150C SCW, SOC HD CAP 1/4-20UNRC-3AX1 FITTING, LUBE 90 DEG 1/8 NPT

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063939-10

DESCRIPTION

Frames, Diecut, 2 Slot, 2-1/2 Inch, 10 Inch Machine Doc#: 273

ASSEMBLY: 063939-10

Frames, Diecut, 2 Slot, 2-1/2 Inch, 10 Inch Machine


37 38

2 P39021 5 P34027

CONN, MALE 10-32UNF TO 1/8TUBE TUBE, NYLON 1/8 O.D. X .022 WALL

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063939-10

DESCRIPTION

Frames, Diecut, 2 Slot, 2-1/2 Inch, 10 Inch Machine Doc#: 273


ASSEMBLY: 063977-2

Control , Unwind, Air Brake Infeed Pacing


1 2 3 5 6 7 8 11 13 14 15

1 1 1 2 3 3 6 3 6 1 1

16 17 18

1 P40027 1 P40028 3 P40708

20 21 22 25 26 29 30 31 32 33 34 35 36

5 3 4 4 4 1 1 1 3 12 12 1 1

091116 827017-P02 827018-P02 P20109 P20368 P20957-002 P20957-007 P20053 P20995-004 P27346 975114-1

P41405 P50223 P50265 P52030 P52052 053491 P990135 071396-30 P212480-02 P212201-1 P20213 P40727 P201397

Label, Unwind Control Bracket, Control , Unwind Cover, Control , Unwind Nut, Pneumatic Toggle Switch Decorative CORD GRIP, 1/2"CONDUIT STRAIGHT .5-.625"CORD CORD GRIP, 1/2 CONDUIT .24-.47 CORD CORD GRIP, 3/8"NPT .16-.31 CORD NUT, CONN LCK 1/2 ELEC NUT, NYLON 3/8"NPT Sensor, Roll End Shut Off 24VDC Controller, Unwind Brake, Proportional Derivative, with Specification Sheet Switch, Pneumatic Toggle 3 Way VALVE, 4 WAY Regulator & Gauge, ARG20 Relieving Type, 0-60 PSI, Dual PSI & Bar Label, 225 Deg Fitting, Pneumatic Male 1/4 Inch Bart to 10-32 Npt With Gasket SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK SCW, HEX HD CAP GRD 8 1/4-20UNC-2AX.75 BLACK WSHR, FLAT PLTD 9/32X5/8X16GA WSHR, SPLIT LCK PLTD 1/4 Dancer Pot Assembly Position Unwind, Components Electrical Control Harness, Unwind Power Single Ended Male, 360 Inches 120vac 10 Amp Cable for "XM" Style Solenoid 4 Meters Long with LED & Diode 24VDC CABLE, 3 CNDCTR 18/3 SO CABLE, 3 CNDCTR 16/3 SHIELDED Valve, Inline Solenoid 3-Way 24VDC Coil CONN, 4COND ESTOP MALE MICRO PLUG

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063977-2

DESCRIPTION

Control , Unwind, Air Brake Infeed Pacing Doc#: 275

ASSEMBLY: 063977-2

Control , Unwind, Air Brake Infeed Pacing


38 39 40

6 P201531 1 031566 1 071401-30

41 42 43 44

1 1 1 4

P212214-2 P201388-09 P20738 P41070

Tubing, 1/8" Heat Shrink Green with Yellow Stripe Diagram, Wiring Unwind Rear Control Enclosure Harness, Unwind Power Single Ended Male 360 Inches 14/3 for 24V Dc Power Supply PWR SPLY, 24VDC 10A 240W 120/240VAC GROMMET, CBL INSERT .47-.51 HDC-KT-12 PLUG, HOLE .625 D Fitting, Pneumatic Elbow Adjustable Male 10-32 To Female With Gasket

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 063977-2

DESCRIPTION

Control , Unwind, Air Brake Infeed Pacing Doc#: 275


ASSEMBLY: 063991

Control , Print Station


0 0 2 3 4 5 6 7 8 9 10 11 12 13 14 23 24 27 28 29 30 32 33 34 35 9999

1 1 1 1 1 1 2 2 10 10 2 4 6 2 2 4 4 1 2 4 6 4 1 2 2 0

021099 031545 827048-P02 827050-P02 091148 P990133 P40711 P40028 P41070 P41405 P41003 P20109 P41124 P212042-075 P201153-11 P20368 P20053 P20957-007 P50223 P50261 P201509 P20529 P20995-004 P20957-008 P20995-001 DWG-WIRESUB-ELEC-BENCH-LABELS

Schematic, Pneumatic Main Press 2200H Connection Diagram Print Station Control Control , Print Station Enclosure Control , Print Station Enclosure Cover Label, Print Station Control Electrical Components, Print Station Control Enclosure Valve, 3 Way Normally Open VALVE, 4 WAY Fitting, Pneumatic Elbow Adjustable Male 10-32 To Female With Gasket Fitting, Pneumatic Male 1/4 Inch Bart to 10-32 Npt With Gasket Fitting, Pneumatic Tee Male 1/4 Inch Barb Nut, Pneumatic Toggle Switch Decorative Tubing, Pneumatic 1/4 Inch Polyethylene 1/6 Inch Wall FUSE, FNQ-R 3/4A 600V AC BRANCH CIRCUIT TIME DELAY Fuse, Holder 1 Pole CC 30A 600V Ac with Indicator LED CORD GRIP, 1/2"CONDUIT STRAIGHT .5-.625"CORD NUT, CONN LCK 1/2 ELEC CORD GRIP, 3/8"NPT .16-.31 CORD SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK SCW, SOC HD CAP 8-32UNRC-3AX1/2 Tubing, 1/4"Heat Shrink Green With Yellow Stripe PLUG, HOLE 7/8 DP-875 NUT, NYLON 3/8"NPT Cord Grip, 1/2 Conduit .20 Cord NUT, NYLON 1/2-14NPT Sub-Electrical-Bench Label

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 063991

Control , Print Station Doc#: 277


ASSEMBLY: 064079-10

Waste Windup, 32 Inch Capacity


3 4 5 6 7 8

1 1 1 1 1 1

9 10 11 13 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 35

1 1 1 1 4 1 2 1 1 1 1 1 1 2 20 2 1 1 1 1 2 2

311786-1-P02 315844-P02 314090-1-P02 510298-10C 560296-16 570913-1 620363-13 620783-3 620660 620880 P10136 P15131 P16178-1 P16280-001 P16301-001 P17026 P18080 P20739 P30063 P31020 P41124 P31048 P40020 P40746 P40745 P41039 P50029 P50429

BLK, SPT ADJ SCR W/W/U Arm, Waste Windup 32 Inch Machined Cover, 3 Inch Idler Roll W/1-1/4 Inch Shaft Coreholder, Cantilevered, 3 Inch D, Waste Windup With Air Clutch Idler Roll, 2.983 Inch D w/Bearings 10 Inch Waste Windup Capstan Roll, 10 Inch Waste Windup, Sandpaper Covered For 1-1/4 Shaft Shaft, Capstan Roll 1-1/4 Diameter 10 Inch Machine SHAFT, RDR/RL 10"LP3000 STUD, BELT TGHTNR W/W/U 2200/4150/4200 Shaft, Tightner Fixed Idler Pulley Waste Wind-up BEARING,BALL,1-1/4 ID,2.4409 OD,, GR/BLT, 1/2P 90"X3/4W PULLEY, IDL FLAT PLAIN 2-1/4X1X3/8B W/HEAVY DUTY BRNG BASE, BELT TGHTNR AM PULLEY, GR/BLT TL 24H100-1610 O-RING, 3/32X1-5/16 BSHNG, TL TL 1610X5/8 PLUG, HOLE 1.000 D GR/BX, R/A 1:1 RATIO STYLE A RING, EXT RTNG 3/8 SHAFT Tubing, Pneumatic 1/4 Inch Polyethylene 1/6 Inch Wall COLLAR, 1-1/2 UNION, ROTARY AIR Clutch and Pulley Assembly, Mach III 58PI, with 24H100 Pulley Clutch and Pulley Assembly, Mach III 38PI, with 24H100 Pulley CONN, MALE M-B 1/4TX1/8NPT SCW, SOC HD CAP 3/8-24UNRF-3AX1 SCW, HEX HD CAP GRD 8 5/16-18UNC-2AX1.75BLAK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 064079-10

Waste Windup, 32 Inch Capacity Doc#: 279

ASSEMBLY: 064079-10



36 37 38 39 40 41 42 43 44 45 45 46 47 48

1 2 4 2 4 3 2 1 1 1 1 1 1 1

P50452 P50467 P52003 P52016 P52035 P55010 P59019 P31138 P31120 620879 P50403 P41427 P41428 P50173

SCW, SOC HD CAP 1/2-13UNRC-3AX3-1/4 SCW, HEX HD CAP GRD 8 5/16-18UNC-2AX2.0BLACK WSHR, FLAT FIBERGLASS .380 ID x .630 OD x .032 THK WSHR, FLAT FIBERGLASS 1.506X1.998X.032 WSHR, SPLIT LCK PLTD 5/16 KEY, SOFT CHAM SQ 3/16X1 CLAMP, SWIVEL SCW 3/8-16X1-1/2 COLLAR, ALUM 2-1/16X1-1/4X1/2 RING, EXT RTNG 1-1/2 SHAFT Stud, Belt Tightener Waste Windup W/Mach III SCW, SHOULDER 1/4X1-1/2 Connector, Male 1/4 Inch Tube 1/16 NPT Connector, Male 1/4 Inch Tube 1/8 NPT SCW, SHOULDER 5/16X1-3/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 064079-10



ASSEMBLY: 064098-1-P02

Dryer, 20KW 208VAC

SEQ# QTY ITEM DESCRIPTION ______________________________________________________________________________________________________________________________________________________ ____________

0 0 21 36 39

1 1 1 12 1

41 42 43 44 45 46 47 55 56 57 58 59 60 70 77 78 79 82 83 84 85 86 88

2 1 2 2 1 4 1 1 1 1 2 4 3.5 1 1 1 1 1 94 2 2 2 56

031620 031622-1 P211920 P34026 P211923-15 P201029-02 P20967-004 P20957-002 P20995-001 P22369 P32018 P59096 090691 090694 090687 P20877-001 P20947-002 P20947-004 091141 P20368 091149 97M106-2 064103-01-P02 P17023-1 P57182 P57183 P57156-1 P50265

Diagram, Schematic Main Press 208V Ac To 480V Ac 2200H Connection Diagram, 20KW Dryer 208-230VAC SNSR, AIRFLOW 20MM PNP OUTPUT 24VDC HOSE, HTR TYPE L-1 6" Heater, Coil, Basic, 3 Phase 208 VAC 20KW Two Circuit with 210 Cut Out CONN, 45 DEG 1/2" PLASTIC LIQUIDTIGHT CONN, STRAIGHT 1-1/4" PLASTIC LIQUIDTIGHT CORD GRIP, 1/2 CONDUIT .24-.47 CORD NUT, NYLON 1/2-14NPT BLWR, DRYER SPB-12 ARR W/13X3.25 RADIAL WHEEL 5HP MNT, MTR BLWR FLTR, EZEKLEEN 16X20X2 Label, Symbol Vacuum, White on Black Label, Symbol Dryer Outlet Hot Air, White on Black LBL, SYMBOL EXH OUTPUT DRYR (WHITE ON BLACK) (15 PER SHT) LABEL, WARNING 1.5H ELEC SHOCK CONDUIT, 1/2"D BLCK PLASTIC LIQUIDTIGHT XTRAFLEX TYPE B LTC050 CONDUIT, 1-1/4"D BLCK PLASTIC LIQUIDTIGHT XTRAFLEX TYPE B LTC125 Nameplate, Power Cabinets Symbolic with Short Circuit Current Rating CORD GRIP, 1/2"CONDUIT STRAIGHT .5-.625"CORD Label, Wire Type and Torque Requirements Dryer Package Components, DS1000A Power Pack, Dryer Disconnect and Controls 208-240Vac 20KW GASKET, 1/16"THK X3/4W PRESS SENSITIVE RBBR Latch, Cam, Fixed Grip, Southco Cam, Latch Southco HINGE, METAL LIFT-OFF STYLE A OFFSET SCW, HEX HD CAP GRD 8 1/4-20UNC-2AX.75 BLACK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION


Dryer, 20KW 208VAC Doc#: 281


Dryer, 20KW 208VAC

SEQ# QTY ITEM DESCRIPTION ______________________________________________________________________________________________________________________________________________________ ____________

89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 9999

28 4 4 4 1 1 2 1 1 1 6 8 8 8 8 8 8 11 15 23 8 4 2 8 2 0

P50617 P57041 P52046 P51037 064098-900-P02 P20053 P52023 P201029-04 P20880 090972 P50058 P50221 P52096 P51018 P52030 P52052 P51010 P50243 P52034 P51008 P50052 P50048 900274-P02 P50053 P20547 DWG-WIRESUB-ELEC-BENCH-LABELS

Screw, Button Head Cap 10-32 UNRF-3A X 1.25 RIVET, POP SHORT 1/8D ALUM WSHR, FENDER PLTD 11/32X1-1/4X1/8(For 5/16 Bolt) NUT, HEX PLASTIC 5/16-18UNC-3B KIT, DRYER NUT, CONN LCK 1/2 ELEC WSHR, FLAT ST/STL 1.328X2.062X.030 CONN, 45 DEG 1-1/4" PLASTIC LIQUIDTIGHT LBL, WARNING 4-1/2"H ELEC SHOCK GENERIC LBL, DANGER EQUIPMENT POWERED BY MULTIPLE SOURCES ENG FRE GER SPA SCW, BTN HD SOC CAP 10-32UNRF-3AX.50 SCW, HEX HD CAP GRD 8 5/16-18UNC-2AX1.25BLAK WSHR, FLAT ST/STL .281X.625X.06 NUT, HEX JAM 5/16-18UNC-2B PLTD WSHR, FLAT PLTD 9/32X5/8X16GA WSHR, SPLIT LCK PLTD 1/4 NUT, HEX 1/4-20UNC-2B PLTD SCW, HEX HD MACH 10-32UNF-2AX3/8 BLACK WSHR, FLAT PLTD #10 7/32X1/2X18GA NUT, HEX 10-32UNF-2B PLTD SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK SCW, RD HD SLOT MACH 6-32UNC-2AX1/2 BLACK LOUVER, VME 4150C M/C SCW, SEMS RD HD PHIL 10-32UNF-2AX1/2 BLACK KIT, INLET FLTR Sub-Electrical-Bench Label

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION


Dryer, 20KW 208VAC Doc#: 281

ASSEMBLY: 064098-900-P02

KIT, DRYER


2 4 5 6 7 8 9 10 14 15 16 17 18 19 20 22 23

1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1

810637-P02 810640 810642 830089 830093 827002-P02 827009-P02 827001-P02 827003-P02 827011-P02 827000-P02 810895-P02 827010-P02 827085-P02 827006-P02 827004-P02 827005-P02

Assembly, Adaptor Plate Hose PLT, MTR TRNSTN 1000 SERIES DUCT, MTR TRNSTN 1000 SERIES ASM, TRNSTN DUCT UPR 1000 SERIES ASM, TRNSTN DUCT LWR 1000 SERIES , Hose Conn , Lower Door Acc Cabinet , Main Door Access Cabinet , Left Side Dryer, Mounting Base , Top Cover Cover, Sound Baffle , Base Spacer, Trnstn Duct , Front Lower Control Box, Enclosure Control Box, Door

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 064098-900-P02

KIT, DRYER Doc#: 283


ASSEMBLY: 064103-01-P02

Power Pack, Dryer Disconnect and Controls 208-240Vac 20KW


0 0 9 18

1 1 19 2

31 41 60 63 76 77 78 79 9999

38 1 1 1 1 1 1 1 0

031621 031622-1 P50052 P212620-50

Diagram, Schematic 20KW Dryer 208V Ac to 480V Ac Connection Diagram, 20KW Dryer 208-230VAC SCW, SEMS RD HD PHIL 10-32UNF-3AX3/8 BLACK Relay, Solid State Two Phase 50A with Heatsink and Cooling Fan 24-480Vac 5-24Vdc P20965-001 RAIL, DIN 35MM (78" PC ISSUED IN IN'S) P20881 LBL, ID ELEC GRND SYM 3/4D GENERIC P990141-1 Dryer Kit, 208-240 Vac 20KW P201290 HNDL, PISTOL FR 100A FUSED DISC 827007-P02 Sub 071394-1 Harness, Power Control Wiring, Dryer, 208-230VAC 071392 Harness, Power Pack to Blower Motor 071393-1 Harness, Power Pack to Heater, 208 to 230VAC DWG-WIRESUB-ELEC-BENCH-LABELS Sub-Electrical-Bench Label

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 064103-01-P02

DESCRIPTION

Power Pack, Dryer Disconnect and Controls 208-240Vac 20KW Doc#: 285

ASSEMBLY: 091148

Label, Print Station Control


1 2 3 4

59.66 31 0 0

P17080-2 P57092 P60090 P60098-1

PLASTIC, BLACK MATTE 1/16"2PLY 24X48"EA PC TAPE, ADHV TRANSFER 1/2" (2160" PER ROLL X 12 ROLLS PER ORDER) PAINT, PEARL WHITE SEMI-GLOSS LATEX PAINT, YELLOW LBL GAL

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 091148

Label, Print Station Control Doc#: 287


ASSEMBLY: 1439791*1*1*104

Mark Andy 2200-10 Diecut Basic Module


0 1100 1101 1102

1 1 1 1

DWG_AT2200-I-DC_2S 063939-10 052468-210 052422-10

1103 1104

1 052426-10 2 052809-10

1105

4 052752-10

1106 1107 1108 1109 1110

2 1 2 2 2

051339-1 052986 052787 052797 581054-10

1111 1119 1121 1122 1139 1143 1144 1152

1 1 2 1 1 1 2 2

052988 052799 975318 051677 975299-10 053114-10 P41421 063206-10-P02

Drawing, Module, 2-Slot Diecut Frames, Diecut, 2 Slot, 2-1/2 Inch, 10 Inch Machine Adjustable 2 Inch Stripping Roll and Arm Idler Roll, 3 Inch D, 11.00 Inch Length, Shot Peened, with Shoulder Bolt Idler Roll, 2.187 Inch D, With Removable S Wrap Idler Roll, 2 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Idler Roll, 3 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Manual Registry, 10 Inch Machine Drive Line, 2 Slot Diecut E-Stop Bracket, Rope Mountng, with Screws Bearing Block Components, Front and Rear, Base Roll, 2.5 Inch Slot Base Roll W/ 1/8 Gear, 4 Inch D, For Diecut Module, Fixed Position Electrical Components Diecut 2 Slot, Pre Wired Front Doors, Interlocked 2 Slot Diecut, Clear Drive Gear and Key, 1/8, for Driveline W/MA Gear Box Air Regulator, 0 to 120 Psi Idler Kit for RD Scorer/Vision System Guarding, Diecut Module, 2 Slot Tee Union 3/8", 1/4",3/8" Straddle Block, W/Die Pressure Screws for 2.5 Slot, 10 Inch

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 1439791*1*1*104

Mark Andy 2200-10 Diecut Basic Module Doc#: 289 33

ASSEMBLY: 1439791*1*1*126

Master Control/Sheeting Module Consisting of the Following;


0 15

1 DWG_AT2200-I-MC 1 SPI220017

16 17 18

1 SPI220018 1 SPI220019 1 SPI220015

1500 1500 1501 1505 1511 1515 1554

1 1 1 4 1 1 1

053105 1439791*1*1*141 826913-P02 315224 063157-10 975210 053008

1555

1 053004

1579

1 P61045

Drawing, Module, Master Control Master Control Module with Intuitive Touch Screen OIT and Press Controls Sheeting Station with Steel Frames and 2-1/2 Inch Slot Open Loop Exit Pacing System Lateral Side Adjust Bearing Blocks for 1 Inch Diameter Tooling Journals Covers, Rear, Master Control Mark Andy 2200-10 Master Control Basic Module Cover, Sheeting Station, Waste Windup Position Leveling Pad, 1/2 Inch Thick Tractor, Hold Down, 2-1/2 Slot E-Stop Hardware Components Bearing Blocks, Side Adjust W/ Bronze Bushings, 1 Inch Journal, For 2-1/2 Inch S Bearing Blocks, Front & Rear, W/ Bronze Bushings, For MA Tooling W/ 1 Inch Journ Label, Clear Grease Tag

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*126

DESCRIPTION

Master Control/Sheeting Module Consisting of the Following; Doc#: 290 42

ASSEMBLY: 1439791*1*1*141

Mark Andy 2200-10 Master Control Basic Module


0 1501 1600 1601 1602 1603 1606

1 1 1 1 1 1 6

DWG_AT2200-I-MC 1439791*1*1*164 063241-10 053118-1 053119-1 975318 052752-10

1607

1 570898-10

1608 1609 1610

1 053272-210 1 842917-10 1 581052-10

1611 1615 1616 1620 1621 1622 1623 1624 1625 1705 1708

1 1 1 1 2 1 1 1 1 2 1

052797 051339-1 052868-10 052859 052787 052988-2 053163-10 900960-120 052799-3 P41421 063206-10-P02

Drawing, Module, Master Control Master Control Configured Module Consisting of the Following: Frames, Master Control & Sheeting Module Main Drive Motor, 10 Hp 208-240V Driveline, Master Control & Sheeting Module W/MA Gear Box, 10 Hp Drive Gear and Key, 1/8, for Driveline W/MA Gear Box Idler Roll, 3 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Roll, Exit Pacing, W/Shaft & Mounting, High Friction Coated, Smooth, 3.9410/3.94 Nip Roll, Air, 50 Durometer, Exit Pacing Tray, Sheeting 4 Inch Base Roll Base Roll W/ 1/8 Gear, Master Control & Sheeting Module, 4 Inch D, .015 Overs Bearing Block Components, Front and Rear, Base Roll, 2.5 Inch Slot Manual Registry, 10 Inch Machine Guard, Sliding, Master Control, 4 Inch Base Roll E-Stop Rope Mounting Components E-Stop Bracket, Rope Mountng, with Screws Electrical Components, Master, Pre Wired Guarding, Master Control Module Program, View 600 Operator Interface Master Revision 20 Front Doors, Interlocked, Master Control, Clear Tee Union 3/8", 1/4",3/8" Straddle Block, W/Die Pressure Screws for 2.5 Slot, 10 Inch

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*141

DESCRIPTION

Mark Andy 2200-10 Master Control Basic Module Doc#: 291 43

ASSEMBLY: 1439791*1*1*164

Master Control Configured Module Consisting of the Following:


1505

1 063172


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*164

DESCRIPTION

Master Control Configured Module Consisting of the Following: Doc#: 292 44

ASSEMBLY: 1439791*1*1*167

Rewind Module Consisting of the Following;


0 23 2500 2501 2502 2504

1 DWG_AT2200-I-RW_SINGLE40 1 SPI220024 1 1 1 1

1439791*1*1*170 053110 315224 P32017-1

Drawing, Module, Rewind, Cantilevered, Single 40 Inch Cantilevered Lower Rewind with 40 Inch Capacity and Taper Tension Control Mark Andy 2200-10 Rewind Basic Module Rewind Covers, Lower, Single Cantilevered Leveling Pad, 1/2 Inch Thick Leveling Pad, Vibration Isolation, Load Range 100-900 Pounds, for Machines W/out

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*167

DESCRIPTION

Rewind Module Consisting of the Following; Doc#: 293 45

ASSEMBLY: 1439791*1*1*170

Mark Andy 2200-10 Rewind Basic Module


0 2550 2551 2552 2553

1 1 1 1 1

DWG_AT2200-I-RW_SINGLE40 063152-10 053102-1 510323-10C 053101-3

Drawing, Module, Rewind, Cantilevered, Single 40 Inch Rewind Frames, Lower Single Cantilevered, 40 Inch Capacity Drive Components, Rewind, 1HP, Cantilevered for Upper or Lower Coreholder, Cantilevered, 3 Inch Turnbuckle W/Mounting Blocks

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*170

DESCRIPTION

Mark Andy 2200-10 Rewind Basic Module Doc#: 294 46

ASSEMBLY: 1439791*1*1*18

Mark Andy 2200-10 Unwind Basic Module


0 200 201 204 205

1 1 1 1 6

DWG_AT2200-I-UW 053129-10 052781 510323-10C 052752-10

206

1 052771-210

207 208 208 209 210 213 215 216 217 218 219 291

1 1 1 1 1 1 2 2 1 1 1 2

052627-210 052775-10 NOTE INFEED PACING 053275-210 052773-1 053191 052787 051677 063977-2 090357-P01 090699 P41421

Use Drawing AT2200-I-UW for this Bill of Material Unwind Frame, Infeed Pacing, Dancer Unwind Frame, Cantilevered, 40 Inch Capacity Coreholder, Cantilevered, 3 Inch Idler Roll, 3 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Web Guide, North American, Standard Materials, Infrared Sensor, W/Tape Dispenser Unwind Dancer, Vertical, 10 Inch Machine Unwind Infeed Pacing Roll, with Bearings Infeed Pacing Control System Nip Roll, Air, 50 Durometer, Pacing Unwind Air Brake, Infeed Pacing End Cover and Regulator, Unwind E-Stop Bracket, Rope Mountng, with Screws Air Regulator, 0 to 120 Psi Control , Unwind, Air Brake Infeed Pacing Label, Nameplate, 2200 Label, Symbol Unwind Coreholder Tee Union 3/8", 1/4",3/8"

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*18

DESCRIPTION

Mark Andy 2200-10 Unwind Basic Module Doc#: 295 3

ASSEMBLY: 1439791*1*1*182

Web Viewing Options Consisting of the Following;


15 3502

1 SPIOEM0080 1 052098-10S001

BST Powerscope 4000 vision system with motorized traverse Vision System, BST Promark, Powerscope 4000 Motorized, with 17 Inch Monitor, fo

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*182

DESCRIPTION

Web Viewing Options Consisting of the Following; Doc#: 296 47

ASSEMBLY: 1439791*1*1*224

Power Pack Module Consisting of the Following:


7501 7501

1 900993-107 1 901190-101

7510 7510 7550

1 SPEC-284 1 SPEC-287 1 1439791*1*1*230

Programmed, Component PowerFlex 70 Rewind Controller 1HP 208-240V Ac Programmed, DeviceNet Scanner Without Motorized Registry 208-240V Ac, Yaskawa F7 Procedure, Emergency Stop and Module Calibration Procedure, Device Net Node Addressing Power Pack Basic Module Consisting of the following;

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*224

DESCRIPTION

Power Pack Module Consisting of the Following: Doc#: 297 50

ASSEMBLY: 1439791*1*1*230

Power Pack Basic Module Consisting of the following;


1 20 7550

1 SPI220174 1 SPI220020 1 975932-10

7557 7560 7561 7561

1 1 1 1

P99005-04 063195 031699 901192-102

7562 7564 7564 7564

1 1 1 1

091141 071363-2 071363-4 071370

10 HP Main Drive Motor Mechanical Line Shaft Drive Unit & Control Kit, Electrical Components, For Power Pack, Yaskawa F7, 10HP Main Drive 208-240V Electrical Components, For Power Pack, 1Hp Rewind Drive 208-240v AC Power Pack, Inverter Drive and Controls, for All Voltages Schematic Main Press 2200H 208-240V Ac With Yaskawa Main Drive Programmed, Micrologix 1500 Central Processor Unit, with Yaskawa F7 Main Drive, Nameplate, Power Cabinets Symbolic with Short Circuit Current Rating Harness, Motor Interface to Ac Controller 8 Awg Shielded 72 Inches Harness, Motor Interface to Ac Controller 12 Awg Shielded 180 Inches Harness, Power Pack Control Wiring

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*230

DESCRIPTION

Power Pack Basic Module Consisting of the following; Doc#: 298 51

ASSEMBLY: 1439791*1*1*245

Dryer System Consisting of the Following;


22 8020 8030 8040

2 1 2 1

SPI220022 052982-7 064098-1-P02 975360

Enhanced Hot Air Drying Package Dryer Manifold W/Hose, 6 Color, 2 Dryers Dryer, 20KW 208VAC Kit, Dryer Interface For Multiple Units

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*245

DESCRIPTION

Dryer System Consisting of the Following; Doc#: 299 52

ASSEMBLY: 1439791*1*1*38

Print Station Module Consisting of the Following;


0 2 4

1 DWG_AT2200-I-PS 2 SPI220082 1 SPI220025

7 8 9

2 SPI220010 2 SPI220011 2 SPI220026

15 21 500 501 502 503 504 505 506 507 508 509 510

2 2 1 2 1 1 2 1 1 2 2 2 2

SPI220106 SPI220021 1439791*1*1*61 315224 053061 052824 090690 090694 090691 062734-10 971225 971223 550269-1

512

2 RX_CERAMIC_10

Drawing, Module, Print Station Ceramic Anilox Roll - Praxair Double Print Station Module, with Slide Out Style Ink Station Cassette Anilox Gears & Bearings - Half Speed Doctor Blade Holder with 4 Blades Undersized Meter Rolls (65 Durometer) with Bearings and Adjustment Arms Through Hardened Impression Rolls Hot Air Dryer Tunnel Mark Andy 2200-10 Print Station Basic Module Leveling Pad, 1/2 Inch Thick Cover, Rear, Printstation Cover, Rear, Plate Roll Throw Off Label, Symbol Registry Label, Symbol Dryer Outlet Hot Air, White on Black Label, Symbol Vacuum, White on Black Doctor Blade Holder, W/4 Blades Gear with Bearings, For Anilox Roll, 1/2 Speed Gear, Drive, For Meter Roll, 1/2 Speed Meter Roll Assembly, 10 Inch, 65 Durometer Roll, Undersized, Includes Bearings a Ceramic Anilox Roll Coupon, Praxair, 10"

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*38

DESCRIPTION

Print Station Module Consisting of the Following; Doc#: 300 4

ASSEMBLY: 1439791*1*1*61

Mark Andy 2200-10 Print Station Basic Module


0 600 601 602 603 604 605 606 607 608 609 610 611 613 614

1 1 1 2 2 2 2 2 2 2 1 2 2 8 4

DWG_AT2200-I-PS 063991 053182-10 052967 052968 053263-10 053342-10 053548 052798-10 052783 052826 052913 052952-110 600158 052752-10

615 616

2 530695-10 2 521022-7

617

2 110803-HG

618 618 619 620 627 900 900 901

2 1 2 2 2 1 1 2

052785-10 NOTE SLIDE IN INK DRAWER 063060-10 052787 P41421 975565-10 NOTE HOT AIR 810877-10-P02

Drawing, Module, Print Station Control , Print Station Frames, Dual Print Station Adjusting Arm Housing, Front Adjusting Arm Housing, Rear Plate Roll Throw Off, W/Stop Guard, Pinch Point, Print Station Continuous Motor, with Clutch Gear Lock, Ink Drawer Gear Box, Driveline, Print Station Drive Line, Print Station to Print Station Cartridge, Front & Rear, for Impression Roll Manual Registry 10 Inch Machine Spacer, 3.5 Inch Length, Tapped, Idler Roll, 3 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt Plate Roll Pin, 1/2 Inch D Impression Roll, 10 Inch, 3 Inch D, Thru Hardened, W 1/8 Helical Drive Gear Gear, Helical, Drive, 73 Tooth 3/4 Bore, 1/8 20 Degree Pressure Angle Slide, Ink Drawer XL Style Slide In Print Station Cassette Ink Station, Slide Out Cassette E-Stop Bracket, Rope Mountng, with Screws Tee Union 3/8", 1/4",3/8" Heat Tunnels, Latches & Hardware Hot Air Option Top Snoot, Heat Tunnel

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*61

DESCRIPTION

Mark Andy 2200-10 Print Station Basic Module Doc#: 301 14

ASSEMBLY: 1439791*1*1*8

Unwind Module Consisting of the Following;


0 1 3 100 101 102 104 111

1 DWG_AT2200-I-UW 1 SPI220007 1 1 1 1 1 4

SPI220168 1439791*1*1*18 053241 052778 975239-S 315224

Use Drawing AT2200-I-UW for this Bill of Material Cantilevered Unwind Module with 40 Inch Capacity, Vertical Dancer, and Web Guide Open Loop Infeed Pacing System Mark Andy 2200-10 Unwind Basic Module Cover, Rear, Unwind Infeed Pacing Cover, Rear, Unwind, Cantilevered Manual, Simplex Web Guide, H6420/21, Spanish Leveling Pad, 1/2 Inch Thick

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*8

DESCRIPTION

Unwind Module Consisting of the Following; Doc#: 302 2

ASSEMBLY: 1439791*1*1*90

Diecut Module Consisting of the Following;

SEQ# QTY ITEM DESCRIPTION ______________________________________________________________________________________________________________________________________________________________

0 10 14 24 1000 1000 1001 1002 1005 1010 1041

1 DWG_AT2200-I-DC_2S 1 SPI220012 1 1 2 1 2 1 1 1 2

SPI220023 SPI220166 063157-10 1439791*1*1*104 315224 052829 975614-10-P02 975241 053004

Drawing, Module, 2-Slot Diecut 2 Station Diecut with Steel Side Frames and 2-1/2 Inch slots, with Top Side Diec 32 Inch Capacity Waste Windup Unit Idler Roll Kit for RD Scorer Web Path and/or Motorized Vision System Tractor, Hold Down, 2-1/2 Slot Mark Andy 2200-10 Diecut Basic Module Leveling Pad, 1/2 Inch Thick Rear Cover W/Door, 2-Slot Diecut Waste Windup, 32 Inch Capacity Driveline Components, For Waste Windup in Diecut Bearing Blocks, Front & Rear, W/ Bronze Bushings, For MA Tooling W/ 1 Inch Journ

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 1439791*1*1*90

DESCRIPTION

Diecut Module Consisting of the Following; Doc#: 303 24

____

ASSEMBLY: 521022-7

Impression Roll, 10 Inch, 3 Inch D, Thru Hardened, W 1/8 Helical Drive G


1 2 3 10

1 521016 1 110740-2HG 2 P10035 3 P50095

Impression Roll, Dual Gear Helical Drive 2.9010/2.9015 Thru Hardened 10 Inch GR, IMP/RL 1/8 73T LH HEL 1-1/2B 1 FACE HI-GRADE HDN BEARING,BALL,15MM ID,35MM OD,11MM WD, SCW, SOC HD CAP 10-32UNRF-3AX1-1/2

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 521022-7

DESCRIPTION

Impression Roll, 10 Inch, 3 Inch D, Thru Hardened, W 1/8 Helical Drive G Doc#: 304


ASSEMBLY: 530695-10

Plate Roll Pin, 1/2 Inch D


1 2 3 4 5 6 7 8 9 10 11 12 13 14

1 1 1 1 1 1 1 1 1 2 2 1 1 1

530696-10 530697 530660 530280 72M210 53M034 53M035 P59008 P17006 P12017 P53009 P50017 P54076 P54158

Shaft, Plate Roll, 1/2 Inch D Housing, Plate Roll Pin 1/2 Inch D Key, Registry Adjust, Plate Roll Pin KNOB, LH EDGE REG 2100-7/4120-10 WSHR, FENDER 7/8OD X 7/32ID STEM, P/R RELEASE KNOB KNOB, P/R RELEASE PLUNGER, SPRNG -BALL 1/4-20X17/32 W/NYLOK O-RING, 1/8X1 BEARING,THRUST WASHER,1/2 ID,15/16 OD,1/32 THK, SCW, CUP PT SOC SET 1/4-28UNRF-3AX.25 SCW, SOC HD CAP 10-32UNRF-3AX3/8 PIN, STD DOWEL 1/8X3/8 Pin, Standard Dowel 1/8x5/16

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 530695-10

Plate Roll Pin, 1/2 Inch D Doc#: 306


ASSEMBLY: 550269-1

Meter Roll Assembly, 10 Inch, 65 Durometer Roll, Undersized, Includes Beari


1 4 10

1 550268-1 2 311394 2 P10192

MTR/RL, 10"MACH 2.835D 65EP UNSZ 2200F Block, Meter Roll Mountng, Ink Sta (Metal) (ECO5298) Bearing, Ball, 3/4ID, 47MM OD, 14MM Wide w/ Extended Inner Race

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 550269-1

DESCRIPTION

Meter Roll Assembly, 10 Inch, 65 Durometer Roll, Undersized, Includes Beari Doc#: 308


ASSEMBLY: 560182-2

KIT, IDL/RL 10"MACH3"D SHOT PEENED


1 2 3

1 560178-10 2 P31009 2 P17090-001

IDL/RL, 10"MACH 3"D (LO-MASS) SHOT-PEENED COLLAR, ALUM 1-1/2ODX3/4IDX1/2W O-RING, NEOPRENE 5/8X13/16X3/32

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 560182-2

DESCRIPTION

KIT, IDL/RL 10"MACH3"D SHOT PEENED Doc#: 310


ASSEMBLY: 581052-10

Base Roll W/ 1/8 Gear, Master Control & Sheeting Module, 4 Inch D, .015

SEQ# QTY ITEM DESCRIPTION _______________________________________________________________________________________________________________________________________________ ___________________

1

1 581051-10

2 3

1 110893 3 P50027

Base Roll, Master Control and Sheeting Module, 3.9600 to 3.9590 D, .015 Oversize Gear, Base Roll, 1/8, 99 Teeth, 2.75 Inch Bore SCW, SOC HD CAP 1/4-28UNRF-3AX3/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 581052-10

DESCRIPTION

Base Roll W/ 1/8 Gear, Master Control & Sheeting Module, 4 Inch D, .015 Doc#: 312


ASSEMBLY: 581054-10

Base Roll W/ 1/8 Gear, 4 Inch D, For Diecut Module, Fixed Position


1 2 3

1 581053-10 1 110893 3 P50027

Base Roll, Diecut Module, 3.9379 to 3.9384D Gear, Base Roll, 1/8, 99 Teeth, 2.75 Inch Bore SCW, SOC HD CAP 1/4-28UNRF-3AX3/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 581054-10

DESCRIPTION

Base Roll W/ 1/8 Gear, 4 Inch D, For Diecut Module, Fixed Position Doc#: 314


ASSEMBLY: 971223

Gear, Drive, For Meter Roll, 1/2 Speed


1

1 130155-HG

2

1 P55010

Gear, Drive, For Meter Roll, Helical 16DP 56 Teeth RH 3/4 Bore, 1/2 Speed KEY, SOFT CHAM SQ 3/16X1

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 971223

DESCRIPTION

Gear, Drive, For Meter Roll, 1/2 Speed Doc#: 316

ASSEMBLY: 971225

Gear with Bearings, For Anilox Roll, 1/2 Speed


1 2 3

1 061815 2 P10003 1 P55021

ASM, GR A/R 1/2SPD STD P/S HELICAL-HG BEARING,BALL,3/4 ID,47MM OD,1-7/32 WD, KEY, SOFT CHAM SQ 3/16X3/4

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 971225

DESCRIPTION

Gear with Bearings, For Anilox Roll, 1/2 Speed Doc#: 317

ASSEMBLY: 974662

KIT, REPAIR SNGL FLEX


1

4 P50595

2 3 4 5

4 4 4 9

SCW, HEX HD CAP GRD 8 1/4-28 UNF-2A X 1.25 SHLDR LENGTH 22/32 MIN 27/32 MAX MAY NUT, HEX PLASTIC 1/4-28UNF-3B TYPE NE SPCR, LNG THK SPCR, LNG THIN PLT, COUPLING INSERT

P51007 720738 720737 720735

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 974662

KIT, REPAIR SNGL FLEX Doc#: 318


ASSEMBLY: 975114-1

Controller, Unwind Brake, Proportional Derivative, with Specification Shee


1 991

1 P22448 1 SPEC-306

CNTRLR, DNCR PD/PID FOR MAG PARTICLE BRK Procedure, Unwind Dancer Calibration DFC-90

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 975114-1

DESCRIPTION

Controller, Unwind Brake, Proportional Derivative, with Specification Shee Doc#: 320


Kit, UVT Shields & Brackets, Final Print


1

1 313721

2

1 313722

3 100 101 102 103 104

2 4 4 8 8 8

824345-2 P52052 P50174 P52027 P52113 P50261

BRKT, MNTG F UVT UV LMP HSG 2200 SCOUT P/S FRONT // SCOUT FINAL FRONT 2200 P/S F BRKT, MNTG R UVT UV LMP HSG 2200 2200 P/S REAR // 2200 FINAL REAR - BLACK Light Shield, UVT, 6 Inches, for 10 Inch Web WSHR, SPLIT LCK PLTD 1/4 SCW, SOC HD CAP 1/4-20UNRC-3AX3/4 WSHR, FLAT PLTD #8 3/16X7/16X18GA WSHR, SPLT LCK PLTD #8 STL SCW, SOC HD CAP 8-32UNRC-3AX1/2

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM


DESCRIPTION

Kit, UVT Shields & Brackets, Final Print Doc#: 321


ASSEMBLY: 975254-110S

UV Shields and Idlers, For Final Print Station, Spanish


1 2 3 4 5 6 7

3 052752-10 1 1 8 8 2 60

822560-P04 826679-10-P04 P50174 P52052 090361-3 P59119

Idler Roll, 3 Inch D, 12.62 Inch Length, Shot Peened, with Shoulder Bolt SHIELD, UV LGT LWR 2200-10G, POWDER COAT MA FLAT BLACK Shield, UV Upper, Die Station SCW, SOC HD CAP 1/4-20UNRC-3AX3/4 WSHR, SPLIT LCK PLTD 1/4 LBL, UV WARNING LGT SPA BLD, DR PRE-GRND 1-1/2X.006(60"LENGTH)

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 975254-110S

DESCRIPTION

UV Shields and Idlers, For Final Print Station, Spanish Doc#: 323

ASSEMBLY: 975318

Drive Gear and Key, 1/8, for Driveline W/MA Gear Box


1 2

1 11M042 1 P55004

GR, DRV 1/8 73T 1-1/8B(PRE-HDN MATRL) KEY, SOFT CHAM SQ 1/4X1

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 975318

DESCRIPTION

Drive Gear and Key, 1/8, for Driveline W/MA Gear Box Doc#: 324

ASSEMBLY: 975360

Kit, Dryer Interface For Multiple Units


1 2 3 4

1 1 1 1

P201471-1 P201338-1 P20368 P20053

Cable, Mini-Plus 8 Pin Female Single Ended 2 Meter Coupler, Mini-Plus 8 Pin Adapter 1-16Un-2A Thread CORD GRIP, 1/2"CONDUIT STRAIGHT .5-.625"CORD NUT, CONN LCK 1/2 ELEC

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 975360

DESCRIPTION

Kit, Dryer Interface For Multiple Units Doc#: 325

ASSEMBLY: 975565-10

Heat Tunnels, Latches & Hardware


1 2 3 4 5 6 7 8 9 10

2 4 1 2 2 2 1 12 12 1

810899-10-P02 770361-10 842898 P56056 530495 P58022 P50222 P50006 P51010 P50223

Heat Tunnel, Quick Change Assembly 3 Inch D Connector Pin, Threaded 10 Inch Quick Change Heat Tunnel Bracket, Lower Right, Heat Tunnel SPRNG, COMP .360X.040X1-1/4 PLUNGER, DOOR LATCH 2200 KNOB, BALL BLACK 3/4D 1/4-20 SCW, SEMS RD HD PHIL 1/4-28UNF-2AX1/2 BLACK SCW, BTN HD SOC CAP 1/4-20UNRC-3AX.38 NUT, HEX 1/4-20UNC-2B PLTD SCW, SEMS RD HD PHIL 1/4-20UNC-2AX5/8 BLACK

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 975565-10

DESCRIPTION

Heat Tunnels, Latches & Hardware Doc#: 326


ASSEMBLY: 975614-10-P02



1 2 4 5 6 8 12 14 15 16 17 18 50 51 52 53 54 55 56 990

1 1 1 1 1 1 11 4 4 4 18 1 1 2 2 4 4 1 1 1

064079-10 062652-P02 827180-P02 822373-P02 822234-P02 220311 P50025 P50072 P52033 P52053 P50053 P55010 822154-P02 P201065-06 P59101 P51008 P50021 P20957-002 P20995-001 021099

Waste Windup, 32 Inch Capacity ASM, W/W/U C/P 2200G SYMBOL Cover, 32 Inch Waste WindUp Left Side Cover, Waste Windup Right W/Rider Roll 32 Inch CVR, ACCESS R 32" W/W/U 4150C PULLEY, GR/BLT 3/8P 40T 5/8"B SCW, SOC HD CAP 10-32UNRF-3AX3/4 SCW, HEX HD CAP GRD 8 3/8-24UNF-2AX1.50BLACK WSHR, FLAT 13/32X13/16X16GA WSHR, SPLIT LCK PLTD 3/8 SCW, SEMS RD HD PHIL 10-32UNF-2AX1/2 BLACK KEY, SOFT CHAM SQ 3/16X1 CVR, LWR 2-1/4" & 4" W/W/U 4150C CLAMP, .500 NYLON CBL WHITE 7633 1/2"CABLE CLAMP, CABLE NYLON 1/4"ID NUT, HEX 10-32UNF-2B PLTD SCW, BTN HD SOC CAP 10-32UNRF-3AX.38 CORD GRIP, 1/2 CONDUIT .24-.47 CORD NUT, NYLON 1/2-14NPT Schematic, Pneumatic Main Press 2200H

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

DESCRIPTION

ASSEMBLY: 975614-10-P02



ASSEMBLY: 975932-10

Kit, Electrical Components, For Power Pack, Yaskawa F7, 10HP Main Drive 208


0 0 1

10 P20370 8 P20842 1 901191-110

2

1 P990180-10

3 4 5 6

1 1 6 1

062365-01 062448-04 P50053 P212316

WIRE, TEFLON AWG-16 BLACK WIRE, HI-TEMP STRND AWG-8 600V 450C Programmed, Yaskawa F7 Main Controller with DeviceNet 10HP 208-240V Ac Electrical Components, For Power Pack, 10Hp Main Drive 208-240 Vac (w/o Drive) ASM, RESISTOR DRV DYB 6.80 OHM 2400W ASM, CNTCTR W/SUP 3PH 600VAC 65A IND 80A RES COIL 110VAC 50/60HZ SCW, SEMS RD HD PHIL 10-32UNF-2AX1/2 BLACK FLTR, LINE AC MTR 480VAC 3PH 60A(F7 DRIVE)

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 975932-10

DESCRIPTION

Kit, Electrical Components, For Power Pack, Yaskawa F7, 10HP Main Drive 208 Doc#: 330

ASSEMBLY: 97M106-2

Dryer Package Components, DS1000A


1 2 3

1 P60008 1 P61013 4 P32034

4

4 P34116

SPRAY, FLTR **MUST ROTATE INV** MSDS, RP SUPER FLTR COAT #411 (INT# 1593) Swivel Leveling Mounts with Vibration Damping Pad Vibration-Damping Swivel Level CLAMP, HOSE RANGE 5"TO 7"

____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: 97M106-2

DESCRIPTION

Dryer Package Components, DS1000A Doc#: 331

ASSEMBLY: DWG052098

Use Drawing 052098 With This Bill


1

1 DWG


____________________________________________________________________________________________________________________________________________________________ SEQ#

QTY

ITEM

ASSEMBLY: DWG052098

DESCRIPTION

Use Drawing 052098 With This Bill Doc#: 332 48



















END OF DOCUMENT

252812643-illustrated-parts-manual-mark-andy-2200.pdf 2p5z3f

Overview 3e4r5l

More details w3441

More Documents from "mailen diaz" 346x2q

252812643-illustrated-parts-manual-mark-andy-2200.pdf 2p5z3f

Sociedades Comerciales 5z4r2l

Inventos De La Edad De Piedra d456j

6l6m1j

Axel Rivas Revivir Las Aulas 6374

1__resumen_primeras Aduana 1e6h25