Advocate Blood Pressure Monitor 2pt1o

Once you install the batteries, the LCD will display the time and date. (See pictur

2. Clock Mode Once you install the batteries, the LCD will display the time and date. (See picture 1)

2. Clock Mode

KD-7902

2. Clock Mode Picture 1 Once you install the batteries, the LCD will display the time and date. (See picture 1)

a. Once you install the batteries, the LCD will display the time

3. Clock Adjusting a.

and date. (See picture1)

When the machine is in the Clock Mode, press the “ O “ and “ M “ buttons at the

and release. The machine enters the Clock Adjusting Mode. The month will tw

(See picture 2). Press the “M“ button continuously to adjust the number, once yo

correct month number press the “ O “ button, the day will start twinkling (See p

adjust the dayPicture with the1“M” button and than press the “ O “ to go to the time and

3. Clock Adjusting

same procedure.

3. Clock Adjusting Picture 1

a. When the machine is in the Clock Mode, press the “ O “ and “ M “ buttons at the same time a. When the machine is in the Clock Mode, press the “ “ and release. The machine enters the Clock Adjusting Mode. The month will twinkle first.

3. Clock Adjusting

(See picture 2). Press the “M“ button continuously to adjust the number, once you have the

the machine is in the Clock Mode, press the “ O “ and “ M “ buttons at the same time month number press the “ O “ button, the day will start twinkling (See picture 2-1) and “ M “ buttons at the same time a.andWhen release. The correct machine and release. The machine enters the Clock Adjusting Mode. The month will twinkle first.

adjust the day with the “M” button and than press the “ O “ to go to the time and repeat the (See picture 2). Press the “M“ button continuously to adjust the number, once you have the same procedure. correct month number press the “ O “ button, the day will start twinkling (See picture 2-1)

enters the Clock Adjusting Mode. The month will twinkle first.

Wrist Blood Pressure Monitor

adjust the day with the “M” button and than press the “ O “ to go to the time and repeat the same procedure.

(See picture 2). Press the “M“ button continuously to adjust the

Operation Guide

Picture 2 b.

number, once you have the correct month number press the

Picture 2-1

To exit the Clock Adjusting Mode when you finish, press the “O” button and will stop twinkling. (See picture 2-2 & 2-3)

c.

When you change the batteries, you need to readjust the clock.

“ “ button, the day will start twinkling (See picture 2-1) adjust Picture 2

Picture 2-1

the day with the “M” button and than press the “ “ to go to the b.

Picture 2

time and repeat the same procedure. b.

To exit the Clock Adjusting Mode when you finish, press the “O” button and the number

Picture 2-1

will stop twinkling. (See picture 2-2 & 2-3)

c. When you change the batteries, you need to readjust the clock. To exit the Clock Adjusting Mode when you finish, press the “O” button and the number will stop twinkling. (See picture 2-2 & 2-3)

c.

Name of Each Part

When you change the batteries, you need to readjust the clock.

b. To exit the Clock Adjusting Mode when you finish, press the “ ” button and the number will stop twinkling. (See picture 2-2 & 2-3)

Systolic

Color Coded Indicator

“MEM” Button/Clock Setting

“START” Button/Clock Adjusting

Pulse

Picture 2-2

Picture 2-3

2. Placement of the Wrist Band and Accurate Position for the Measurement

Diastolic

a.

Be sure to place the wrist cuff on bare skin of left wrist, and place sphygmomanometer on c. When you change the batteries, you need to readjust the clock.

the center of wrist. (See picture)

Function Description

b.

Place wrist cuff 1~2cm above wrist t.

c.

Close Wrist cuff, make sure your wrist does not feel tension. Don’t close it too tight. 3. Placement of the Wrist Band and Accuratethe Position for the Measurement (Otherwise measurement will not be precise).

Based on oscillometric method and silicon integrate pressure sensor technology, blood pressure and heart rate can be a. Be sure to place the wrist cuff on bare skin of left wrist, and place sphygmomanometer on the measured automatically and non-invasively which helps to ease the operation. New blood pressure classification indicator visually indicates ’s blood pressure category, 120 memories with date and time display. These memories 2-2 are stored in Picture Picture 2-3 Picture 2-2 Prohibition: center of wrist. (See picture) two groups with a capacity for 60 readings each. The pulse and irregular heart beat (if any) can be indicated.

This product cannot be used on infants.

b. Place wrist cuff 1~2cm above wrist t. Specification 2. Placement of the Wrist Band and Accurate Position forbe the Measurement 2.other Placement thepressure Wrist Band and Accurate Pos This product can not used on uses than of blood measuring

a.

c. Close cuff,wrist, make sure wrist doesa.not feelBe tension. closethe it too tight.cuff (Otherwise Be sure to place the wrist cuff on bare skinWrist of left and your place sphygmomanometer onplace sure Don’t to wrist on bare skin of left of wrist. (See picture) the measurement will not be precise). the center of wrist. (See picture)

1. Model: KD-7902

9. Measuring accuracy: ±3mmHg the center

2. Machine size:87.2mm×64mm×30.7mm

10. Heart pulse rateb. range: 40-180 minute cuff Placeperwrist

3. Cuff size: 140mm x 195mm

1~2cm aboved.wrist Keep t. up right position at the same level b. of your Place wrist cufffigure) 1~2cm above wrist t. heart. (See d. Keep up right position at the same level of your heart. (See figure) make suree.your To wrist not stability feel tension. itClose toototight. c.advisable Wrist make wrist givedoes greater to theDon’t arm isclose put thecuff, plastic boxsure that your comes withdoes the no 12. Environmental humidity for using: <80% e. be Toprecise). give greater stability to the arm is advisable to put the plastic box that comes with the meter (Otherwise the measurement will not (Otherwise the measurement will not be precise). meter below the wrist. (See figure)

4. Weight: 108g (excluding batteries)

c 11. Environmental temperature for using: -5 ~ +40° c. Close Wrist cuff,

5. Measuring method: oscillometric method, automatic air inflation

13. Environmental temperature for storage: -20~+55°c

and measurement

below the wrist. (See figure)

14. Environmental humidity for storage: <95%

Prohibition:

6. Memory volume: 2×60 times

Prohibition:

15. Environmental pressure: atmosphere pressure

This product cannot be used on infants.

7. Power source: AAA×2 batteries 8. Blood pressure measuring range:

This product cannot be used on infants. This product can not be used on other uses than blood pressure measuring This product can not be used on other uses than Prohibition:

16. Battery life: Approx.1 month with normal usage

0-295mmHg

* This product cannot be used on infants * This product cannot be used on other uses than blood pressure measurement

d.

Measuring

Keep up right position at the same level of your heart. (See figure)

d. Keep up right position at the same level of your he To give greater stability to the arm is advisable to put the plastic box that e. comes To with give the greater stability to the arm is advisable to Procedures meter below the wrist. (See figure) meter below the wrist. (See figure) e.

1. Battery Loading a. Open battery cover located in the back left side of the monitor. b. Load two “AAA” size batteries. Please pay attention to polarity c. Close the battery cover.

*

3. Measuring Process a.

When LCD shows battery symbol it

After your body is in a comfortable position, press the “O” button. After a long “beep”, BPM will itself, and LCD will display all automatically. See picture 3.

means you must change the batteries at

b.

once. Rechargeable batteries with a voltage

Then you will see on screen "U1" or “U2” indicating the Group of memory in which the

of 1.2V are not suitable for this product. * Take out all the batteries if the device will not be used for a long time to avoid battery leakage and relevant damage.

The equipment, the batteries and cuff used in it can be disposed as industrial rubbish at the end of their usage, or 3. Measuring Process according to local regulations.

35104_wrist BPM 7902B manual.indd 1

3. Measuring Process

a.

After your body is in a comfortable position, press the “O” button. After “beep”, a. a long After your body is in a comfortable position, p BPM will itself, and LCD will display all automatically. See picture 3. BPM will itself, and LCD will display al

b.

Then you will see on screen "U1" or “U2” indicating the Group of memory in which b. Thenthe you will see on screen "U1" or “U2” indic 8/12/09 11:46:07 AM

measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the group press the "M" button and than press the “O” button to confirm your choice.

5. Measuring Process a.

c.

After your body is in a comfortable position, press the “ ”

Press “M” again after the last memory to turn off the machine or it will

power off after a few minutes of no use. To exit Memory at any point press “ ”

button. After a long “beep”, BPM will itself, and LCD will and the machine will turn off immediately. display all automatically. (See Picture 3)

measurement shallshall be recorded Figure 3-1 &Figure 3-2). If you wantwant to you change measurement shall (see be recorded (see3-1 3-1 & If wantthetothe change the measurement be recorded (see Figure & 3-2). If 3-2). you to change group press the "M" button than press thethan “O” button confirm your choice. group press theand "M" button and press theto“O” button toyour confirm your choice. group press the "M" button and than press the “O” button to confirm choice.

b. Then you will see on screen “U1” or “U2” indicating the Group

Picture 3

d. If it has no memory (or all memories have been deleted), the LCD will show

Picture 3-1

Picture 3-2

c. After you confirm the current group, if it already has memory in this group, LCD will measurement shall be recorded (see Figure 3-1 & 3-2). If you want to change the show the latest result. (See picture 3-3) If the machine has no memory, the LCD will group press the "M" button and than press the “O” button to confirm your choice. show zeros. (See picture 3-4)

“0” for systolic, diastolic, heart rate, and show “00” for the numbers of memory.

of memory in which the measurement shall be recorded

(see Picture 3-1 & 3-2). If you want to change the group press the

If it has no memory all memories deleted), and the LCD will machine show “0” for systolic, (Seed. picture 4-4) (or Press the “have”been button the will power off. diastolic, heart rate, and show “00” for the numbers of memory. (See picture 4-4) Press the

“M” button and then press the “ ” button to confirm your choice.

“O” button and the machine will power off.

c. After you confirm the current group, if it already has memory in

Picture 3 3Picture 3 Picture

c. c.

Picture 3-13-1 Picture 3-1 Picture

Picture 3-23-2 Picture 3-2 Picture

After you you confirm the group, ifPicture it ifalready has memory in group, will c. After youcurrent confirm thegroup, current group, if ithas already hasthis memory inLCD this group, will 3-3 Picture After confirm the current it already memory in this group, LCD willLCD3-4

this group, LCD will show the latest result. (See picture 3-3)show Ifshow thelatest the result. (See picture 3-3) If the no memory, LCD willwill the latest result. (See3-3) picture 3-3)machine If has the has machine has the no memory, the LCD will the show latest result. (See picture If machine the no memory, the LCD show zeros. (See picture 3-4) d.picture Apicture few seconds show zeros. (See 3-4) later, LCD shows a single “0”. (See picture 3-5) show zeros. (See 3-4)

Picture 3

machine has no memory, the LCD will show zeros.

c.

Picture 3-1

Picture 3-2

After you confirm the current group, if it already has memory in this group, LCD will show the latest result. (See picture 3-3) If the machine has no memory, the LCD will

Picture 4-4

show zeros. (See picture 3-4)

(See picture 3-4).

Picture 5

6. Deletion of Memories Press the "M" button, choose the group of memory you want to delete, once one of the readings is displayed, press "M" and hold for three seconds or until you see "--" (see Figure 5) Press again "M" and it will power off.

Picture 3-33-3 Picture 3-3 Picture d. d.

A few seconds LCDLCD shows aLCD single “0”.“0”. (See picture 3-5) e.seconds Then thea single monitor to pressurize automatically. d. Alater, fewlater, later, shows abegins single “0”. (See picture 3-5) A few seconds shows (See picture 3-5) f.

During the measurement, the pressure number will appear on screen. The sign of heart

Picture 3-3 d.

Picture 3-43-5 Picture Picture 3-4 Picture 3-4

Picture 3-4

will be displayed intermittent while the pressure starts going down. (See picture

A few seconds later, LCD shows a single “0”. (See picture 3-5)

d. A few seconds later, LCD shows a single “0”. (See picture 3-5).

8. Deletion of Memories

e. e. f. f. e. Then the monitor begins to pressurize automatically.

Then the monitor to pressurize automatically. e. Thenbegins thebegins monitor to pressurize automatically. Then the monitor to begins pressurize automatically. During the measurement, the pressure number will appear screen. The of heart f.During During the measurement, the pressure numberonwill appear onsign screen. The sign of heart the measurement, the pressure Picture 3-5 number will appear on screen. The sign of heart willwill be displayed while the the pressure starts going down. (See(See picture will beintermittent displayed intermittent while the pressure starts going down. (See picture be displayed intermittent while pressure starts going down. picture

want to delete, once one of the readings is displayed, press

e. Then the monitor begins to pressurize automatically. During the measurement, the pressure number will appear on screen. The sign of heart will be displayed f. During the measurement, the pressure number will appear on screen. The sign of heart

f.

d. If it has no memory (or all memories have been deleted), the LCD will show “0” for systolic,

diastolic, heart rate, and showdiastolic, “00”heart forrate,the ofnumbers memory. (See picture 4-4) and numbers show “00” for the of memory. (See picture 4-4) Press the Press the Press the “M” button, choose the group of “O” memory you button and the machine will power off. “O” button and the machine will power off.

Picture 3-53-5 Picture 3-5 Picture

“M” and hold for three seconds or until you see “--” (see

will be displayed intermittent while the pressure starts going down. (See picture

intermittent while the pressure starts going down. (See picture 3-6 & 3-7).

Figure 5) Press again “M” and it will power off. Picture 4-4

g. After measurement, the result of systolic, diastolic and pulse rate will all display on LCD. The irregular 3-6&3-7) 3-6&3-7) g.

Picture 5

6. Deletion of Memories

After After measurement, the result of thesystolic, result ofdiastolic systolic,and diastolic pulse rate and will pulseallrate display will all on display on g. measurement,

Press the "M" button, choose the group of memory you want to delete, once one of the readings is

LCD. The irregular LCD. Theheartbeat irregularsymbol heartbeat (if any) symbol and(ifblood any) pressure and blood classification pressure classification indicator indicator

"M" and it will power off.

heartbeat symbol (if any) and blood pressure classification indicator will twinkle. (See picture 3-8). The results

displayed, press "M" and hold for three seconds or until you see "--" (see Figure 5) Press again

will twinkle. will (See twinkle. picture(See 3-8). picture The results 3-8). The are automatically results are automatically recorded inrecorded the previously in the previously are automatically recorded in the previously selected memory.

h.g.

selected memory. selected memory.

3-6&3-7)

Press ” at the the end of ofmeasurement theallBPM. can do the same if you want to stop the After“measurement, result systolic, diastolic to and turn pulse off rate will display You on LCD. The irregular heartbeat symbol (if any) and blood pressure classification indicator

measurement at any time.3-8). TheTheBPM off automatically a few minutes of no use. will twinkle. (See picture results goes are automatically recorded in the after previously

Picture 4-4

Picture 5

9. Shut Down 6. Deletion of Memories

selected memory.

After each Press measurement thechoose “ ” button to power off the machine. the "M" press button, the group of memory you wantAfter to delete, once one of the readings is displayed, press "M" and hold for three seconds or until you see "--" (see Figure 5) Press again one minute of non-use the machine will power off. "M" and it will power off.

Picture 3-6 Picture 3-6 Picture h. 3-6

h.

Picture 3-7 Picture 3-7

Picture 3-8 Picture 3-8

3-7 of Picture Press h. "O" Picture at Press the end "O" at measurement the end of measurement to3-8 turn off to theturn BPM. off You the BPM. can doYou the can samedoifthe yousame if you

Press "O" at the end of measurement to turn off the BPM. You can do the same if you

want to stop want the to measurement stop the measurement at any time.atThe anyBPM time. goes The BPM off automatically goes off automatically after a few after a few

want to stop the measurement at any time. The BPM goes off automatically after a few minutes of no use.minutes

of minutes no use. of no use.

Abnormality & Troubleshooting (1)

6. Assessing High Blood Pressure for Adults 4. Assessing High Blood Pressure for Adults

Abnormality & Troubleshooting

4. Assessing 4.for Assessing High high Blood High Pressure Blood Pressure forregard Adults for Adults The following standards assessingfor blood pressurehigh (withoutblood topressure age or gender)(without have The following standards assessing regard to age or gender) have been The standards following for standards assessing forOrganization). high assessing blood Please high pressure blood (without pressure regard (without to age regard or gender) to age have or gender) been established as a following guidelineThe according to WHO (World Health note that

have

other risk factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration and

been established been established as a guideline as aaccording guidelinetoaccording WHO (World to WHO Health (World Organization). Health Organization). Please notePlease that note that established as a guideline according to may affect these figures. Consult with your physician forWHO accurate(World assessment.Health Organization). Please note that other risk factors other risk factors other risk (e.g.factors diabetes, (e.g.obesity, diabetes, smoking, obesity,etc.) smoking, need to etc.) be need takentointo be consideration taken into consideration and and

may affect may these affect figures. these Consult figures. physician with your for physician accuratefor assessment. accurate (e.g. diabetes, obesity, smoking, etc.) needwith toConsult beyour taken into consideration and may assessment. affect these figures. Consult

with your physician for accurate assessment.

Classification of blood pressure for adults 0

0

0

Diastolic (mmHg)

Abnormality LCD shows low battery symbol LCD shows “Er 0”

Reason

Checkout

Batteries low Pressure system is before measurement.

Change the batteries unstable

LCD shows “Er 1”

Systolic pressure detect failed

LCD shows “Er 2”

Diastolic pressure detect failed

LCD shows “Er 3”

Pneumatic system blocked or cuff is too tight during inflation

LCD shows “Er 4”

Pneumatic system leakage or cuff is too loose during inflation

Don’t move and try again.

Place the cuff correctly and try again

LCD shows “Er 5”

Inflation above 300mmHg

LCD shows “Er 6”

Over 3 minutes while pressure above 15 mmHg

Measure again after 5 minutes.

LCD shows “Er 7”

EEPROM accessing error

please

LCD shows “Er 8”

Device parameter check error

distributor or the factory.

If the monitor is still abnormal,

the

local

5. Reading result in Memory 5. Reading result Memory a. Press the "M"; the in group “U1” will appear intermittent on the LCD. If you want to change a. Press thethe "M"; groupthe “U1” will appear on the LCD. you want change press "O"the button, "U2" willintermittent appear intermittent, to go to back WHO/ISHgroup, Definition and Classification ofgroup Blood Pressure Levels if youIfwant "O" just button, "U2" will if you the want to go back againgroup, to thepress groupthe"U1" pressthe"O" (seegroup Figure 4 appear & 4-1).intermittent, Once you choose memory again to the "O" your (see Figure 4 &the 4-1). Oncenumber you choose memory group, press the group "M" "U1" buttonjust to press confirm selection, group will the display

group, press the "M" button to confirm your selection, the group number will display constant. constant.

7. Reading Memory Results a.

5. Reading result in Memory 5. Reading result in Memory

a. Press the "M"; the group “U1” will appear intermittent on the LCD. If you want to change a. Press the "M"; the group “U1” will appear intermittent on the LCD. If you want to change group, press the "O" button, the "U2" group will appear intermittent, if you want to go back

press the "O" button, the "U2" group will appear intermittent, if you want to go back Press the “M”; the group “U1” will appear intermittent group, on againthe to theLCD. group "U1" just press "O" (see Figure 4 & 4-1). Once you choose the memory

again to the group "U1" just press "O" (see Figure 4 & 4-1). Once you choose the memory group, press the "M" button to confirm your selection, the group number will display group, press the "M" button to confirm your selection, the group number will display constant.

constant. If you want to change group, press the “ ” button, the “U2” group will

appear intermittent, if you want to go back again to the group “U1” just press “

Picture 4 Picture 4

Picture 4-1 Picture 4-1

” (see Figure 4 & 4-1). Once you choose the memory group, b. Once the group has been selected, the most recent result appears on screen with the number b. (See OncePicture the group been selected, the most(ifrecent screenclassification with the number 01. 4-2)hasThe irregular heartbeat nay) result and theappears blood on pressure

press the “M” button to confirm your selection, the group numberwillwill 01. Picture 4-2)with The (if nay) and theToblood classification also(See appear together theirregular time andheartbeat date of measurement. movepressure to the following display constant. b.

will also appear together with theyou timereach and date of measurement. move to the memory press "M" so forth until the end of the or the result thatfollowing you Picture 4 and Picture 4-1memory To Picture 4 Picture 4-1 memoryfor. press and 4-3) so forth until you reach the end of the memory or the result that you are seeking (See"M" picture are seeking for. (See picture 4-3)

Once the group has been selected, the most recent result appears onbeen selected, the most recent result appears on screen with the number b. Once the group has b. Once the group has been selected, the most recent result appears on screen with the number

01. (See Picture 4-2) The irregular heartbeat (if nay) and the blood pressure classification 01. (See Picture 4-2) The irregular heartbeat (if nay) and the blood pressure classification will also appear together with the time and date of measurement. To move to the following

also appear together with the time and date of measurement. To move to the following screen with the number 01. (See Picture 4-2) The irregularwill heartbeat (ifand so forth until you reach the end of the memory or the result that you memory press "M" memory press "M" and so forth until you reach the end of the memory or the result that you are seeking for. (See picture 4-3) are seeking for. (See picture 4-3)

nay) and the blood pressure classification will also appear together with

Picture 4-2 Picture 4-2

Picture 4-3 Picture 4-3

c. Press “M” again after the last memory to turn off the machine or it will power off after a few

the time and date of measurement. To move to the following memory c. Pressof“M” againToafter theMemory last memory to point turn off the “O” machine will power after minutes no use. exist at any press and or theitmachine willoffturn offa few minutes of no use. To exist Memory at any point press “O” and the machine will turn off immediately. immediately.

press “M” and so forth until you reach the end of the memory or the result that you are seeking for. (See picture 4-3)

Picture 4-2 Picture 4-2

Picture 4-3 Picture 4-3

If you cannot resolve the problem you can the factory or customer service department 1-866-373-2824 Distributed by Diabetic Supply of Suncoast, Inc. HC 3 Box 7017 Dorado, PR 00646 www.dsosi.com

c. Press “M” again after the last memory to turn off the machine or it will power off after a few c. Press “M” again after the last memory to turn off the machine or it will power off after a few minutes of no use. To exist Memory at any point press “O” and the machine will turn off minutes of no use. To exist Memory at any point press “O” and the machine will turn off immediately. immediately.

35104_wrist BPM 7902B manual.indd 2

8/12/09 11:46:10 AM