Ansys Workbench Environment Introduction 26501z
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Ansys Workbench Environment Introduction as PDF for free.
More details w3441
- Words: 1,066
- Pages: 15
Chapter 1 ANSYS Workbench
ANSYS Meshing Application Introduction ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-1
April 28, 2009 Inventory #002645
ANSYS Workbench
Overview
Training Manual
• ANSYS Workbench Environment • Toolbox • Workbench Project Schematic • Linking Items in the Project Schematic • Workbench File Management • Archiving your Workbench 12.0 project • Importing Models • Exporting Project Components
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-2
April 28, 2009 Inventory #002645
ANSYS Workbench
The Workbench Environment
Training Manual
• For most situations the Workbench GUI is divided into 2 primary sections (there are other optional sections we’ll see in a moment):
The Toolbox
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
The Project Schematic
1-3
April 28, 2009 Inventory #002645
ANSYS Workbench
The Toolbox
Training Manual
• The toolbox contains 4 subgroups: • Analysis systems: predefined templates that can be placed in the schematic. • Component systems: various applications that can be accessed to build, or expand, analysis systems. • Custom Systems: predefined analysis systems for coupled applications (FSI, thermal-stress, etc.). s can also create their own predefined systems. • Design Exploration: Parametric management and optimization tools. ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-4
April 28, 2009 Inventory #002645
ANSYS Workbench
The Toolbox
Training Manual
• The systems and components displayed in the toolbox will depend on the installed products. • Using the check boxes in the “View All / Customize” window, the items displayed in the toolbox can be toggled on or off. • The toolbox customization window is normally left closed when not in use.
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-5
April 28, 2009 Inventory #002645
ANSYS Workbench
The Project Schematic
Training Manual
• The Workbench project schematic is a graphical representation of the workflow defining a system or group of systems. • The workflow in the project schematic is always left to right. • There are currently several applications which are native to Workbench, meaning they run entirely in the Workbench window: – Project Schematic, Engineering Data and Design Exploration
• Non-native applications (called data-integrated) run in their own window: – Mechanical (formerly Simulation), Mechanical APDL (formerly ANSYS), ANSYS Fluent, ANSYS CFX, Etc . . .
• Blocks of cells can be deleted by RMB menu selection.
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-6
April 28, 2009 Inventory #002645
ANSYS Workbench
The Project Schematic
Training Manual
• In this example a Fluid Flow (FLUENT) analysis type is selected for the project schematic. • From the toolbox the selection can be dragged and dropped onto the schematic or simply double clicked. • Note that a Mesh item appears in the Fluid Flow block
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-7
April 28, 2009 Inventory #002645
ANSYS Workbench
Meshing as a Component System
Training Manual
• Note that you can also create an entry on the Project Schematic that is a standalone instance of the ANSYS Meshing Application • In the example shown, the Meshing entry in the Component Systems toolbox is dragged onto the Project Schematic
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-8
April 28, 2009 Inventory #002645
ANSYS Workbench
The Project Schematic
Training Manual
• Linkages between different entries in the schematic can be established in a number of ways • The RMB will reveal various choices to you
Linkage
RMB
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-9
April 28, 2009 Inventory #002645
ANSYS Workbench
Workbench File Management
Training Manual
• Workbench creates a project file and a series of subdirectories to manage all associated files. • s should allow Workbench to manage the content of these directories. Please do NOT manually modify the content or structure of the project directories. • When a project is saved a project file is created (.wbpj), using the specified file name (e.g. MyFile.wbpj). • A project directory will be created using the project name. In the above example the directory would be MyFile_files. • A number of subdirectories will be created in the project directory (explained next).
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-10
April 28, 2009 Inventory #002645
ANSYS Workbench
Workbench File Management
Training Manual
• Directory Structure: – dpn: this is the design point directory. This essentially is the state of all parameters for a particular analysis. In the case of a single analysis there will be only one “dp0” directory. – global: contains subdirectories for each application in the analysis. In the example at right the “Mech” directory will contain the database, and other associated files from the Mechanical application. – SYS: the “SYS” directory will contain subdirectories for each system type in the project (e.g. Mechanical, Fluent, CFX, etc.). Each system subdirectory contains solver specific files. For example the MECH subdirectory would contain the results file, the ds.dat file, solve.out file and so on. – _files: contains input files, macro files etc. that may be associated with a project.
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-11
April 28, 2009 Inventory #002645
ANSYS Workbench
Workbench File Management
Training Manual
• From the Workbench “View” menu activate the “Files” option to display a window containing file details and locations.
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-12
April 28, 2009 Inventory #002645
ANSYS Workbench
Workbench File Management
Training Manual
• Archive: quickly generates a single compressed file containing all pertinent files. – File is zip format and can be opened using the “Restore Archive . . . ” utility in WB2 or any unzip program.
– Several options are available when archiving systems as shown here.
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-13
April 28, 2009 Inventory #002645
ANSYS Workbench
Importing Models
Training Manual
• Models developed before Release 12.0 of Workbench can be imported using the Import icon. They will be converted to a WB 12.0 version
(V 11.0)
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-14
April 28, 2009 Inventory #002645
ANSYS Workbench
Exporting Project Components
Training Manual
• Project components can be exported from within the particular application. This is similar to saving from within an 11.0 Workbench App: File/Export
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-15
April 28, 2009 Inventory #002645
ANSYS Meshing Application Introduction ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-1
April 28, 2009 Inventory #002645
ANSYS Workbench
Overview
Training Manual
• ANSYS Workbench Environment • Toolbox • Workbench Project Schematic • Linking Items in the Project Schematic • Workbench File Management • Archiving your Workbench 12.0 project • Importing Models • Exporting Project Components
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-2
April 28, 2009 Inventory #002645
ANSYS Workbench
The Workbench Environment
Training Manual
• For most situations the Workbench GUI is divided into 2 primary sections (there are other optional sections we’ll see in a moment):
The Toolbox
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
The Project Schematic
1-3
April 28, 2009 Inventory #002645
ANSYS Workbench
The Toolbox
Training Manual
• The toolbox contains 4 subgroups: • Analysis systems: predefined templates that can be placed in the schematic. • Component systems: various applications that can be accessed to build, or expand, analysis systems. • Custom Systems: predefined analysis systems for coupled applications (FSI, thermal-stress, etc.). s can also create their own predefined systems. • Design Exploration: Parametric management and optimization tools. ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-4
April 28, 2009 Inventory #002645
ANSYS Workbench
The Toolbox
Training Manual
• The systems and components displayed in the toolbox will depend on the installed products. • Using the check boxes in the “View All / Customize” window, the items displayed in the toolbox can be toggled on or off. • The toolbox customization window is normally left closed when not in use.
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-5
April 28, 2009 Inventory #002645
ANSYS Workbench
The Project Schematic
Training Manual
• The Workbench project schematic is a graphical representation of the workflow defining a system or group of systems. • The workflow in the project schematic is always left to right. • There are currently several applications which are native to Workbench, meaning they run entirely in the Workbench window: – Project Schematic, Engineering Data and Design Exploration
• Non-native applications (called data-integrated) run in their own window: – Mechanical (formerly Simulation), Mechanical APDL (formerly ANSYS), ANSYS Fluent, ANSYS CFX, Etc . . .
• Blocks of cells can be deleted by RMB menu selection.
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-6
April 28, 2009 Inventory #002645
ANSYS Workbench
The Project Schematic
Training Manual
• In this example a Fluid Flow (FLUENT) analysis type is selected for the project schematic. • From the toolbox the selection can be dragged and dropped onto the schematic or simply double clicked. • Note that a Mesh item appears in the Fluid Flow block
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-7
April 28, 2009 Inventory #002645
ANSYS Workbench
Meshing as a Component System
Training Manual
• Note that you can also create an entry on the Project Schematic that is a standalone instance of the ANSYS Meshing Application • In the example shown, the Meshing entry in the Component Systems toolbox is dragged onto the Project Schematic
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-8
April 28, 2009 Inventory #002645
ANSYS Workbench
The Project Schematic
Training Manual
• Linkages between different entries in the schematic can be established in a number of ways • The RMB will reveal various choices to you
Linkage
RMB
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-9
April 28, 2009 Inventory #002645
ANSYS Workbench
Workbench File Management
Training Manual
• Workbench creates a project file and a series of subdirectories to manage all associated files. • s should allow Workbench to manage the content of these directories. Please do NOT manually modify the content or structure of the project directories. • When a project is saved a project file is created (.wbpj), using the specified file name (e.g. MyFile.wbpj). • A project directory will be created using the project name. In the above example the directory would be MyFile_files. • A number of subdirectories will be created in the project directory (explained next).
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-10
April 28, 2009 Inventory #002645
ANSYS Workbench
Workbench File Management
Training Manual
• Directory Structure: – dpn: this is the design point directory. This essentially is the state of all parameters for a particular analysis. In the case of a single analysis there will be only one “dp0” directory. – global: contains subdirectories for each application in the analysis. In the example at right the “Mech” directory will contain the database, and other associated files from the Mechanical application. – SYS: the “SYS” directory will contain subdirectories for each system type in the project (e.g. Mechanical, Fluent, CFX, etc.). Each system subdirectory contains solver specific files. For example the MECH subdirectory would contain the results file, the ds.dat file, solve.out file and so on. – _files: contains input files, macro files etc. that may be associated with a project.
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-11
April 28, 2009 Inventory #002645
ANSYS Workbench
Workbench File Management
Training Manual
• From the Workbench “View” menu activate the “Files” option to display a window containing file details and locations.
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-12
April 28, 2009 Inventory #002645
ANSYS Workbench
Workbench File Management
Training Manual
• Archive: quickly generates a single compressed file containing all pertinent files. – File is zip format and can be opened using the “Restore Archive . . . ” utility in WB2 or any unzip program.
– Several options are available when archiving systems as shown here.
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-13
April 28, 2009 Inventory #002645
ANSYS Workbench
Importing Models
Training Manual
• Models developed before Release 12.0 of Workbench can be imported using the Import icon. They will be converted to a WB 12.0 version
(V 11.0)
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-14
April 28, 2009 Inventory #002645
ANSYS Workbench
Exporting Project Components
Training Manual
• Project components can be exported from within the particular application. This is similar to saving from within an 11.0 Workbench App: File/Export
ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved.
1-15
April 28, 2009 Inventory #002645
Related Documents 3m3m1z
Ansys Workbench Environment Introduction 26501z
July 2021 0
Ansys Workbench 5d6m1h
February 2021 0
Submodeling Using Ansys Workbench 5m3zp
December 2019 89
Ansys Workbench Training Manual f3v4w
December 2019 151
Ansys Workbench Tutorial.pdf 402j5e
December 2019 76
44774944-ansys-workbench-buckling.ppt 6i4l65
December 2019 60More Documents from "Jyoti Bhanu Pratap Prajapati" 3s5y4o
Ansys Workbench Environment Introduction 26501z
July 2021 0
Session 12 Chapter 15 Chopra 5thed 6s254x
November 2021 0
Guddalo Sulli 2jj3w
December 2019 405
Otba Of Class 9 Of Maths 181t65
November 2019 62
G.o.ms.no.26 731j3d
December 2019 56