Changeman Audit - Function. 1e6f2g
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Changeman Audit - Function. as PDF for free.
More details w3441
- Words: 3,428
- Pages: 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
CHANGE MAN AUDIT FUNCTION: The Change Man audit function allows you to ensure synchronization of components in an evolving package with baseline libraries and other participating packages. Based on the package master and the impact analysis database, the audit function inspects the staging libraries of a package for out-of-synch conditions. Out-of-synch conditions could result from: • copybooks being modified after compiling the source component that calls them • load module being modified after the composite load component that calls them has been link edited • a package containing a load component that does not match its source component Also, audit flags components of a package as out-of-synch for: • not being active • copied, but not staged • a designated compile procedure was not used while staging a source component THE AUDIT REPORT
The audit report that you generate depends on the parameters and options that you select on the Audit Change Man For each library type, the audit report provides information about each component in the baseline and staging libraries, their corresponding ISPF statistics, and out-ofsynch conditions. According to your selected parameters and options, your audit Change Management
Page 1 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
report may contain one or all of the following reports (section) each beginning with a report header: • Staged component by library type (editable components and load module) • Source-to-copy relationship (copybooks within source code) • Load-to-load relationship (statically link-edited called subroutines within composite load modules) • Component history Also, the audit report ends with the following summary reports: • Legend and Summary of flagged out-of-synch conditions • Recommendation Summary REPORT HEADER
Each report (section), with the exception of the summary sections, contains a header that provides the version of Change Man at your site. Also, the report contains the generated date and time, the package level, the package ID, the installation date of the package, status of the package, department number of the requested package, and component analysis type or report type. For example, the following illustration is a sample of a report header of a staged components by library type report of a simple package (SB04000086).
Change Management
Page 2 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
REPORT BODY
The body of the report displays a section for each component library type associated with the package. The components appear with its ISPF statistics in the baseline (on the left side of the body), and the staging libraries for checkup and comparison appear on the right side.
Section 1. Staged Components by Library Type According to the library type, editable component or load module (load or likeload), the format of the report differs. For example, the following illustration is a Stage Components by Library Type report for editable components (source code, copybooks, or JCL) report.
Change Management
Page 3 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
NOTES Out-of-synch conditions are displayed between the baseline and staging areas. Also, the following illustration contains information for load modules (LOD and like- LOD library types). The following table describes the fields of the Staged Components by Library Type section of the audit report. Column Name
Description
Name
The name of the component.
VV.MM
The version and modification number for the component following the IBM® standards (mm starts at 01, increments to 99; vv starts at 01, increments to 99, and recycles to 01). The first time the component is processed by Change Page 4 of 22
Change Management
ChangeMan CHANGEMAN AUDIT FUNCTION:
Man the vv.mm is 01.01. Each successive stage request (within the same change package) increments the mm portion (for example, 01.02, 01.03).
Created
The next package using the component causes the vv portion to be incremented (02.01). If an existing library is added to Change Man the vv.mm is not reset. The date (yyyy/mm/dd) that the component was first included in the Change Man system.
Changed
The date (yyyy/mm/dd) of the most recent change to the component residing in current production (on the staging side of the report this would be the most recent staged date).
Size
The number of lines of text data.
Init
The size of the component when first created (version 01.01).
Tso-id
The TSO identification of the person responsible for this component's version and modification (vv.mm).
Package
The name of the participating package where the component resides.
Dept
The department number field, which is filled in when a new package is created from the Package Create .
Linkdate
For a load module, this is the link-edit date of the component in the baseline and staging libraries. For a load module, this field indicates that the module is an alias of a specific module.
Alias-of
Change Management
Page 5 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
AC
For a load module, the authorization code (usually 00).
Attr
For a load module, this field displays the attributes.
Setssi
For a load module, a timestamp set by Change Man or extracted from a vendor module.
Section 2. Source to Copy Relationships Report The Source to Copy Relationships report lists the copybooks called in source components. Also, the report provides baseline information (on the left side) and staging information (on the right side) about them. The source component name and flagged out-of-sync conditions appear in the middle of the report. All source components in the audited package and baseline source components that call the changed copybooks appear on the report. If there is no baseline information for a component, then it is a new. If there is no staging information for a component, then it is not staged and resides in the baseline library.
Change Management
Page 6 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Section 3. Load-to-Load Relationships Report The Load-to-Load Relationships report contains the load modules called in composite load modules. Also, it provides baseline information (on the left side) and staging information (on the right side). The calling composite load module name and flagged out-of-synch conditions for the called load modules appear in the middle of the report. This report contains all composite load modules staged in the audited package and those baseline load modules that call load modules changed in the audited package. If there is no baseline information for a load module, then it is a new. If there is no staging information for a load module, then it is not staged and resides in the baseline library. Change Management
Page 7 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Section 4. Legend and Summary The Legend and Summary portion of the Audit Report provides the following information: • The level of the audit return code • The highest encountered return code • The number of encountered out-of-synch messages for each out-of-synch conditions • A message indicating whether the change package ed or failed its audit
Change Management
Page 8 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
The following illustration is an example of the Legend and Summary section of the Audit Report.
Section 5. Recommendation Summary Report The Recommendation Summary Report section of the audit report provides recommendations for resolving out-of-synch conditions detected in the audit package. For example, the following illustration of the Recommendation Summary section shows that the audit discovered SYNCH0, SYNCH1 as the out-ofsynch conditions.
Change Management
Page 9 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Audit success or failure shows in the 'Audit ' line on the last page of the audit report. Generally, If the package does not the audit, you cannot be freeze it for promotion or installation. For the package to the audit, the audit return code should correspond to the audit level set by your application i.e 4 Note : There may be some unknown components to Change Man components. Some components might lack ISPF statistics or be unparsable load modules for which not all the audit checks can be done.
Change Management
Page 10 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
OUT-OF-SYNCH CONDITIONS Audit detects and reports out-of-synch conditions between the components of an audit Package, baseline components, and other components that are called in the primary Package components. Each out-of-synch condition sets an appropriate return code based on its impact on the integrity of the audited change package.
Return Codes: Return Code 0 4 8
12
Description No out-of-synch conditions were found in your package. No action is required. Some out-of-synch conditions were found, but the conditions are very minor and are usually informational. Typically, no action is required. Some out-of-synch conditions were found, and the conditions must be reviewed and possibly corrected. These out-of-synch conditions are SYNCH5, SYNCH8, and SYNCH16. action is required prior to freezing the package. Some out-of-synch conditions were found, and the conditions must be reviewed and corrected. All out-of-synch conditions are affected, except SYNCH0, SYNCH5, SYNCH8, and SYNCH16. action is required prior to freezing the package
This section describes the out-of-synch condition messages you can receive during your audit and gives the corresponding return code for each message.
DUPLIC! (Staging duplicates baseline) Components that, after a line by line compare, show no difference between staging and baseline libraries cause this condition. At baseline ripple, this causes older versions of hat component to drop off prematurely.
Change Management
Page 11 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Return Code
4
Description Delete the duplicate component from the change package or change the contents of the staged component.
! COPY! (Embedded copybooks) Shows that there is a copy within a copy (an embedded copylink). This is an informational code indicating that a relationship exists.
Return Code
Description
0
No action required.
SYNCH0! (Component unknown to Change Man) If Change Man has no record of this component in the package master, and the Component is calling another module and one (or more) of the following situations exist, then SYNCH0! results: • The component does not exist in the baseline library • The source-to-copy or load-to-load relationship does not exist in the Impact Analysis table. • The relationship is found but the called or calling component does not exist in the baseline library
Change Management
Page 12 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Return Code 0
Description Ignore if the component resides in another participating package excluded from this audit due to installation date. If the component exists in the baseline library, run the Conversion Assistance to select new relationships.
SYNCH1! (ISPF statistics not available) A component has no ISPF statistics. Therefore, some audit checks cannot be performed for this component.
Return Code
0
Description
Create or reset the ISPF statistics for the component.
SYNCH2! (Compile/designated procedure differ) Source or like-source components in which the final compile was done without using the designated compile procedure (including designated compile options, link options, or options)
Return Code
Change Management
Description
Page 13 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
12
Recompile the component using the designated procedure.
SYNCH3! (Unparsable load module) A load component whose IDRDATA records cannot be parsed and interpreted correctly. Therefore, some audit checks cannot be performed for the component.
Return Code
0
Description
Check the load module, it might be corrupted. Also, stage, relink, or recompile the corresponding source component.
SYNCH4! (Y problem in staging) A copybook has been staged after the staging of the source component that calls the copybook. Therefore, the source has been compiled with a previous version of the copybook. An updated staged copybook may be nested in another copybook called in the source copybook.
Return Code 12
Description Stage the source component to include the update copybook staging libraries. Alternatively, set the Auto-Resolve option to YES and resubmit the audit.
SYNCH5! (Y high date problem in baseline) Change Management
Page 14 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
When a copybook is staged, source components that are not staged and called the copybook receive outof-synch condition because they are compiled with a previous versions of the copybook. An updated staged copybook may be nested in another copybook called in the baseline source component.
Return Code
Description
8
Recompile the source component from the baseline to include copybooks residing in the staging libraries.
SYNCH6! (Activity file not checked out) The component activity file (CAF) of a component has not been checked out, while the component has been staged.
Return Code
12
Description
Check out and stage the associated activity file for the component.
SYNCH7! (Called subroutine in staging) After staging the composite load module that calls a specific load module, you have staged that load module. Therefore, an out-of-synch condition is present because a previous version of the called module is link-edited to the calling module.
Return Code
Change Management
Description
Page 15 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
12
Relink the calling load module to include the called load module in the staging libraries. Alternatively, set the Auto-Resolve option to YES and re-submit the audit.
SYNCH8! (Called subroutine in baseline) When you stage a load module, all composite load modules that are not staged and called the staged load module become out-of-synch because a previous version of the subroutine is link-edited with these load modules. An updated staged subroutine may be link-edited in another load module called by the baseline composite load module.
Return Code 8
Description Relink the calling load module from baseline to include the called load module in the staging libraries.
SYNCH9! (Source and load discrepancy) A source component and a corresponding load module in the staging libraries do not match. For example, when the load module is link-edited into the staging library, outside of Change Man, it replaces the load module from the staging of the source component and creates a source and load module discrepancy.
Return Code 12
Description Stage the source component to create a new load module
SYNCH10! (Version regression problem) Change Management
Page 16 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
You have checked out a component to more than one change package. At the time of the audit of the other packages, one of the packages has been installed. Therefore, current changes to the component are invalid, because the changes were made to the previous baseline and not to the newly baseline version. To avoid version regression due to concurrent development, you must merge changes in the new baseline version with the changes in the staged component.
Return Code 12
Description Copy the staged component to a development library. Check out component from baseline to obtain the latest version. Apply your changes to the latest version and stage the component.
SYNCH11! (Component hash discrepancy) A components was staged, then edited or replaced in the staging library outside of Change Man.
Return Code
12
Description
Stage the component again.
SYNCH12! (Orphan module in staging) Outside of Change Man, a component is copied into the staging library. Although the component is in the baseline library and its relationships are recorded in the Impact Analysis table, it is not treated as a component in the staging library. Also, when staging a source component, the compile job abends and no load module is staged. Therefore, the source component is an orphan module.
Change Management
Page 17 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Return Code
Description
12
Delete the component from the staging library.
SYNCH13! (Baseline/staging discrepancy) Based on the ISPF statistics of the baseline and staging libraries, an editable staged component has an earlier last modified date than its corresponding baseline component. Therefore, the staged component is out-of-synch with the baseline library. For load modules, the SETSSI of the staged and baseline components are compared and if the staged SETSSI is less than the baseline SETSSI, then the load module is flagged.
Return Code 12
Description Check out the most current component from the baseline, apply changes, and stage the component. If a load module in the staging library has been created by recompiling a source component from the baseline, recompile the source component from the baseline again to obtain the most current version.
SYNCH14! (Component not in active status) A component in the package is not in active status.
Return Code
Change Management
Description
Page 18 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
12
To activate the component, re-stage it.
SYNCH15! (Source to copy relationship problem) After a source component, which calls the contents of a copybook, was staged, the content of the copybook was changed. These conditions resulted in a out-of-synch condition for the source component with the called copybook. Possible scenarios for this condition follow: • The copybook might have been included from the baseline, staging, or promotion libraries based on the SYSLIB search for the source component compile job. • The contents of the called copybook (found in either staging, promotion or baseline library) has changed since the Source module was compiled. • A new version of the copybook has been added to the SYSLIB search order for that source component. The Staging LCT member has a more current activation date than the corresponding source member.
Return Code
12
Description
Re-stage the source component to obtain the current COPY or LCT relationship. Alternatively, set the Auto-Resolve option to YES and resubmit the audit.
SYNCH16! (Y low-date problem in baseline) The last modified date of a source component in baseline is after the last recompile date or after a called copybook was last modified in staging library. A copybook was changed in a package, which does not contain the source component that calls it. The source component has been baselined in another package after the copybook has been
Change Management
Page 19 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
changed. Therefore, the source-to-copybook relationship is out-of-synch. A Synch16! also applies to conditions where a source component is recompiled from baseline into a package. It alerts the to a recompiled source component residing in a package in motion where a copybook included from the previous recompile originated from baseline, and the corresponding copybook was installed from another package after the recompile date of the source. The conditions are as follows: • There is a recompiled component in a package in motion and the included copybook does not reside in the staging library of the same package. The copybook resides in baseline. • The activation date and time of the included copybook from the baseline library has a more current date and time than the recompile date and time of the corresponding source. • The copybook hash token from baseline and the copybook hash token stored in the package master for the included copybook at the time of the last recompile are different.
Return Code 8
Description Recompile the source component from baseline to include the copybooks residing in the staging libraries
SYNCH17! (Copybook deleted problem in staging) A new unknown to Change Man copybook is staged into a package, and a source component that calls the unknown is also staged in the same package or a participating package. When the copybook is deleted, changes are not made to the source component to remove any reference to the copybook. A baselined copybook is changed and staged, then deleted from the package but the source that calls it is not re-staged or recompiled.
Change Management
Page 20 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Return Code 12
Description Stage the missing called copybook and re-stage the source component. If the copybook is no longer needed, remove any reference to it from the source component, and re-stage the source component. If the copybook is no longer needed, and the source was recompiled from baseline,and at least one other copybook has to be included from any staging libraries,recompile the source from baseline to include the baseline version of the deleted copybook. If the copybook is no longer needed, and the source was recompiled from baseline,and there are no other copybooks to be included from any staging libraries, and there are no compile or link-edit attributes changes, delete the recompile source from the package.
SYNCH18! (Load deleted problem in staging) A new unknown to Change Man load module is staged into a package, and a composite load module that calls it is also staged in the same package or a participating package. When the load module is deleted, changes are not made to the source and link-edit control cards for the composite load module to remove any reference to the load module.
Return Code 12
Change Management
Description Stage the missing called load module in the composite load module, and relink the composite load module. If the called load module is no longer needed, remove any reference from the link-
Page 21 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
edit control cards, and the source and re-stage the composite load module.
Change Management
Page 22 of 22
CHANGE MAN AUDIT FUNCTION: The Change Man audit function allows you to ensure synchronization of components in an evolving package with baseline libraries and other participating packages. Based on the package master and the impact analysis database, the audit function inspects the staging libraries of a package for out-of-synch conditions. Out-of-synch conditions could result from: • copybooks being modified after compiling the source component that calls them • load module being modified after the composite load component that calls them has been link edited • a package containing a load component that does not match its source component Also, audit flags components of a package as out-of-synch for: • not being active • copied, but not staged • a designated compile procedure was not used while staging a source component THE AUDIT REPORT
The audit report that you generate depends on the parameters and options that you select on the Audit Change Man For each library type, the audit report provides information about each component in the baseline and staging libraries, their corresponding ISPF statistics, and out-ofsynch conditions. According to your selected parameters and options, your audit Change Management
Page 1 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
report may contain one or all of the following reports (section) each beginning with a report header: • Staged component by library type (editable components and load module) • Source-to-copy relationship (copybooks within source code) • Load-to-load relationship (statically link-edited called subroutines within composite load modules) • Component history Also, the audit report ends with the following summary reports: • Legend and Summary of flagged out-of-synch conditions • Recommendation Summary REPORT HEADER
Each report (section), with the exception of the summary sections, contains a header that provides the version of Change Man at your site. Also, the report contains the generated date and time, the package level, the package ID, the installation date of the package, status of the package, department number of the requested package, and component analysis type or report type. For example, the following illustration is a sample of a report header of a staged components by library type report of a simple package (SB04000086).
Change Management
Page 2 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
REPORT BODY
The body of the report displays a section for each component library type associated with the package. The components appear with its ISPF statistics in the baseline (on the left side of the body), and the staging libraries for checkup and comparison appear on the right side.
Section 1. Staged Components by Library Type According to the library type, editable component or load module (load or likeload), the format of the report differs. For example, the following illustration is a Stage Components by Library Type report for editable components (source code, copybooks, or JCL) report.
Change Management
Page 3 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
NOTES Out-of-synch conditions are displayed between the baseline and staging areas. Also, the following illustration contains information for load modules (LOD and like- LOD library types). The following table describes the fields of the Staged Components by Library Type section of the audit report. Column Name
Description
Name
The name of the component.
VV.MM
The version and modification number for the component following the IBM® standards (mm starts at 01, increments to 99; vv starts at 01, increments to 99, and recycles to 01). The first time the component is processed by Change Page 4 of 22
Change Management
ChangeMan CHANGEMAN AUDIT FUNCTION:
Man the vv.mm is 01.01. Each successive stage request (within the same change package) increments the mm portion (for example, 01.02, 01.03).
Created
The next package using the component causes the vv portion to be incremented (02.01). If an existing library is added to Change Man the vv.mm is not reset. The date (yyyy/mm/dd) that the component was first included in the Change Man system.
Changed
The date (yyyy/mm/dd) of the most recent change to the component residing in current production (on the staging side of the report this would be the most recent staged date).
Size
The number of lines of text data.
Init
The size of the component when first created (version 01.01).
Tso-id
The TSO identification of the person responsible for this component's version and modification (vv.mm).
Package
The name of the participating package where the component resides.
Dept
The department number field, which is filled in when a new package is created from the Package Create .
Linkdate
For a load module, this is the link-edit date of the component in the baseline and staging libraries. For a load module, this field indicates that the module is an alias of a specific module.
Alias-of
Change Management
Page 5 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
AC
For a load module, the authorization code (usually 00).
Attr
For a load module, this field displays the attributes.
Setssi
For a load module, a timestamp set by Change Man or extracted from a vendor module.
Section 2. Source to Copy Relationships Report The Source to Copy Relationships report lists the copybooks called in source components. Also, the report provides baseline information (on the left side) and staging information (on the right side) about them. The source component name and flagged out-of-sync conditions appear in the middle of the report. All source components in the audited package and baseline source components that call the changed copybooks appear on the report. If there is no baseline information for a component, then it is a new. If there is no staging information for a component, then it is not staged and resides in the baseline library.
Change Management
Page 6 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Section 3. Load-to-Load Relationships Report The Load-to-Load Relationships report contains the load modules called in composite load modules. Also, it provides baseline information (on the left side) and staging information (on the right side). The calling composite load module name and flagged out-of-synch conditions for the called load modules appear in the middle of the report. This report contains all composite load modules staged in the audited package and those baseline load modules that call load modules changed in the audited package. If there is no baseline information for a load module, then it is a new. If there is no staging information for a load module, then it is not staged and resides in the baseline library. Change Management
Page 7 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Section 4. Legend and Summary The Legend and Summary portion of the Audit Report provides the following information: • The level of the audit return code • The highest encountered return code • The number of encountered out-of-synch messages for each out-of-synch conditions • A message indicating whether the change package ed or failed its audit
Change Management
Page 8 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
The following illustration is an example of the Legend and Summary section of the Audit Report.
Section 5. Recommendation Summary Report The Recommendation Summary Report section of the audit report provides recommendations for resolving out-of-synch conditions detected in the audit package. For example, the following illustration of the Recommendation Summary section shows that the audit discovered SYNCH0, SYNCH1 as the out-ofsynch conditions.
Change Management
Page 9 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Audit success or failure shows in the 'Audit ' line on the last page of the audit report. Generally, If the package does not the audit, you cannot be freeze it for promotion or installation. For the package to the audit, the audit return code should correspond to the audit level set by your application i.e 4 Note : There may be some unknown components to Change Man components. Some components might lack ISPF statistics or be unparsable load modules for which not all the audit checks can be done.
Change Management
Page 10 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
OUT-OF-SYNCH CONDITIONS Audit detects and reports out-of-synch conditions between the components of an audit Package, baseline components, and other components that are called in the primary Package components. Each out-of-synch condition sets an appropriate return code based on its impact on the integrity of the audited change package.
Return Codes: Return Code 0 4 8
12
Description No out-of-synch conditions were found in your package. No action is required. Some out-of-synch conditions were found, but the conditions are very minor and are usually informational. Typically, no action is required. Some out-of-synch conditions were found, and the conditions must be reviewed and possibly corrected. These out-of-synch conditions are SYNCH5, SYNCH8, and SYNCH16. action is required prior to freezing the package. Some out-of-synch conditions were found, and the conditions must be reviewed and corrected. All out-of-synch conditions are affected, except SYNCH0, SYNCH5, SYNCH8, and SYNCH16. action is required prior to freezing the package
This section describes the out-of-synch condition messages you can receive during your audit and gives the corresponding return code for each message.
DUPLIC! (Staging duplicates baseline) Components that, after a line by line compare, show no difference between staging and baseline libraries cause this condition. At baseline ripple, this causes older versions of hat component to drop off prematurely.
Change Management
Page 11 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Return Code
4
Description Delete the duplicate component from the change package or change the contents of the staged component.
! COPY! (Embedded copybooks) Shows that there is a copy within a copy (an embedded copylink). This is an informational code indicating that a relationship exists.
Return Code
Description
0
No action required.
SYNCH0! (Component unknown to Change Man) If Change Man has no record of this component in the package master, and the Component is calling another module and one (or more) of the following situations exist, then SYNCH0! results: • The component does not exist in the baseline library • The source-to-copy or load-to-load relationship does not exist in the Impact Analysis table. • The relationship is found but the called or calling component does not exist in the baseline library
Change Management
Page 12 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Return Code 0
Description Ignore if the component resides in another participating package excluded from this audit due to installation date. If the component exists in the baseline library, run the Conversion Assistance to select new relationships.
SYNCH1! (ISPF statistics not available) A component has no ISPF statistics. Therefore, some audit checks cannot be performed for this component.
Return Code
0
Description
Create or reset the ISPF statistics for the component.
SYNCH2! (Compile/designated procedure differ) Source or like-source components in which the final compile was done without using the designated compile procedure (including designated compile options, link options, or options)
Return Code
Change Management
Description
Page 13 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
12
Recompile the component using the designated procedure.
SYNCH3! (Unparsable load module) A load component whose IDRDATA records cannot be parsed and interpreted correctly. Therefore, some audit checks cannot be performed for the component.
Return Code
0
Description
Check the load module, it might be corrupted. Also, stage, relink, or recompile the corresponding source component.
SYNCH4! (Y problem in staging) A copybook has been staged after the staging of the source component that calls the copybook. Therefore, the source has been compiled with a previous version of the copybook. An updated staged copybook may be nested in another copybook called in the source copybook.
Return Code 12
Description Stage the source component to include the update copybook staging libraries. Alternatively, set the Auto-Resolve option to YES and resubmit the audit.
SYNCH5! (Y high date problem in baseline) Change Management
Page 14 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
When a copybook is staged, source components that are not staged and called the copybook receive outof-synch condition because they are compiled with a previous versions of the copybook. An updated staged copybook may be nested in another copybook called in the baseline source component.
Return Code
Description
8
Recompile the source component from the baseline to include copybooks residing in the staging libraries.
SYNCH6! (Activity file not checked out) The component activity file (CAF) of a component has not been checked out, while the component has been staged.
Return Code
12
Description
Check out and stage the associated activity file for the component.
SYNCH7! (Called subroutine in staging) After staging the composite load module that calls a specific load module, you have staged that load module. Therefore, an out-of-synch condition is present because a previous version of the called module is link-edited to the calling module.
Return Code
Change Management
Description
Page 15 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
12
Relink the calling load module to include the called load module in the staging libraries. Alternatively, set the Auto-Resolve option to YES and re-submit the audit.
SYNCH8! (Called subroutine in baseline) When you stage a load module, all composite load modules that are not staged and called the staged load module become out-of-synch because a previous version of the subroutine is link-edited with these load modules. An updated staged subroutine may be link-edited in another load module called by the baseline composite load module.
Return Code 8
Description Relink the calling load module from baseline to include the called load module in the staging libraries.
SYNCH9! (Source and load discrepancy) A source component and a corresponding load module in the staging libraries do not match. For example, when the load module is link-edited into the staging library, outside of Change Man, it replaces the load module from the staging of the source component and creates a source and load module discrepancy.
Return Code 12
Description Stage the source component to create a new load module
SYNCH10! (Version regression problem) Change Management
Page 16 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
You have checked out a component to more than one change package. At the time of the audit of the other packages, one of the packages has been installed. Therefore, current changes to the component are invalid, because the changes were made to the previous baseline and not to the newly baseline version. To avoid version regression due to concurrent development, you must merge changes in the new baseline version with the changes in the staged component.
Return Code 12
Description Copy the staged component to a development library. Check out component from baseline to obtain the latest version. Apply your changes to the latest version and stage the component.
SYNCH11! (Component hash discrepancy) A components was staged, then edited or replaced in the staging library outside of Change Man.
Return Code
12
Description
Stage the component again.
SYNCH12! (Orphan module in staging) Outside of Change Man, a component is copied into the staging library. Although the component is in the baseline library and its relationships are recorded in the Impact Analysis table, it is not treated as a component in the staging library. Also, when staging a source component, the compile job abends and no load module is staged. Therefore, the source component is an orphan module.
Change Management
Page 17 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Return Code
Description
12
Delete the component from the staging library.
SYNCH13! (Baseline/staging discrepancy) Based on the ISPF statistics of the baseline and staging libraries, an editable staged component has an earlier last modified date than its corresponding baseline component. Therefore, the staged component is out-of-synch with the baseline library. For load modules, the SETSSI of the staged and baseline components are compared and if the staged SETSSI is less than the baseline SETSSI, then the load module is flagged.
Return Code 12
Description Check out the most current component from the baseline, apply changes, and stage the component. If a load module in the staging library has been created by recompiling a source component from the baseline, recompile the source component from the baseline again to obtain the most current version.
SYNCH14! (Component not in active status) A component in the package is not in active status.
Return Code
Change Management
Description
Page 18 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
12
To activate the component, re-stage it.
SYNCH15! (Source to copy relationship problem) After a source component, which calls the contents of a copybook, was staged, the content of the copybook was changed. These conditions resulted in a out-of-synch condition for the source component with the called copybook. Possible scenarios for this condition follow: • The copybook might have been included from the baseline, staging, or promotion libraries based on the SYSLIB search for the source component compile job. • The contents of the called copybook (found in either staging, promotion or baseline library) has changed since the Source module was compiled. • A new version of the copybook has been added to the SYSLIB search order for that source component. The Staging LCT member has a more current activation date than the corresponding source member.
Return Code
12
Description
Re-stage the source component to obtain the current COPY or LCT relationship. Alternatively, set the Auto-Resolve option to YES and resubmit the audit.
SYNCH16! (Y low-date problem in baseline) The last modified date of a source component in baseline is after the last recompile date or after a called copybook was last modified in staging library. A copybook was changed in a package, which does not contain the source component that calls it. The source component has been baselined in another package after the copybook has been
Change Management
Page 19 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
changed. Therefore, the source-to-copybook relationship is out-of-synch. A Synch16! also applies to conditions where a source component is recompiled from baseline into a package. It alerts the to a recompiled source component residing in a package in motion where a copybook included from the previous recompile originated from baseline, and the corresponding copybook was installed from another package after the recompile date of the source. The conditions are as follows: • There is a recompiled component in a package in motion and the included copybook does not reside in the staging library of the same package. The copybook resides in baseline. • The activation date and time of the included copybook from the baseline library has a more current date and time than the recompile date and time of the corresponding source. • The copybook hash token from baseline and the copybook hash token stored in the package master for the included copybook at the time of the last recompile are different.
Return Code 8
Description Recompile the source component from baseline to include the copybooks residing in the staging libraries
SYNCH17! (Copybook deleted problem in staging) A new unknown to Change Man copybook is staged into a package, and a source component that calls the unknown is also staged in the same package or a participating package. When the copybook is deleted, changes are not made to the source component to remove any reference to the copybook. A baselined copybook is changed and staged, then deleted from the package but the source that calls it is not re-staged or recompiled.
Change Management
Page 20 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
Return Code 12
Description Stage the missing called copybook and re-stage the source component. If the copybook is no longer needed, remove any reference to it from the source component, and re-stage the source component. If the copybook is no longer needed, and the source was recompiled from baseline,and at least one other copybook has to be included from any staging libraries,recompile the source from baseline to include the baseline version of the deleted copybook. If the copybook is no longer needed, and the source was recompiled from baseline,and there are no other copybooks to be included from any staging libraries, and there are no compile or link-edit attributes changes, delete the recompile source from the package.
SYNCH18! (Load deleted problem in staging) A new unknown to Change Man load module is staged into a package, and a composite load module that calls it is also staged in the same package or a participating package. When the load module is deleted, changes are not made to the source and link-edit control cards for the composite load module to remove any reference to the load module.
Return Code 12
Change Management
Description Stage the missing called load module in the composite load module, and relink the composite load module. If the called load module is no longer needed, remove any reference from the link-
Page 21 of 22
ChangeMan CHANGEMAN AUDIT FUNCTION:
edit control cards, and the source and re-stage the composite load module.
Change Management
Page 22 of 22
Related Documents 3m3m1z
Changeman Audit - Function. 1e6f2g
December 2021 0
Audit Of Marketing Function 50232f
April 2022 0
Changeman Tool Description 1b1w1c
December 2019 20
Dengeki Sentai Changeman Review d5o65
July 2022 0
Changeman Ds Guide 2r2123
October 2019 206
Changeman Manual 475h5t
December 2019 15More Documents from "Bharat Sahni" 532l5u
All Multibaggers Started With Small Market Caps 596n5i
November 2022 0
Edit Package 3p1a1t
October 2019 114
Changeman Audit - Function. 1e6f2g
December 2021 0
The Small Print In Icici Bonds 6v2q6b
November 2021 0
Visionplus Online Architecture 332b6a
December 2019 54