Dialup Error 4a431d

Windows dialup networking errors : Dialup error: Connection successful Dialup error 2: The system cannot find the file specified Dialup error 5: Access denied Dialup error 5: Invalid procedure call Dialup error 6: Stack overflow Dialup error 20: The system cannot find the device specified Dialup error 71: No more connections allowed. Dialup error 380: Invalid property value Dialup error 600: An operation is pending Dialup error 601: The port handle is invalid Dialup error 602: The port is already open Dialup error 603: Caller's buffer is too small Dialup error 604: Wrong information specified Dialup error 605: Cannot set port information Dialup error 606: The port is not connected Dialup error 607: The event is invalid Dialup error 608: The device does not exist Dialup error 609: The device type does not exist Dialup error 610: The buffer is invalid Dialup error 611: The router is not available Dialup error 612: The router is not allocated Dialup error 613: Invalid compression specified Dialup error 614: Out of buffers Dialup error 615: The port was not found Dialup error 616: An asynchronous request is pending Dialup error 617: The port or device is already disconnecting Dialup error 618: The port is not open Dialup error 619: The port is disconnected Dialup error 620: There are no endpoints Dialup error 621: Cannot open the phone book file Dialup error 622: Cannot load the phone book file Dialup error 623: Cannot find the phone book entry Dialup error 624: Cannot write to phone book file Dialup error 625: Invalid information found in the phone book Dialup error 626: Cannot load a string Dialup error 627: Cannot find key Dialup error 628: The port was disconnected Dialup error 629: The port was disconnected by the remote machine Dialup error 630: The port was disconnected due to hardware failure Dialup error 631: The port was disconnected by the Dialup error 632: The structure size is incorrect Dialup error 633: The port is already in use or is not configured for remote access dialout Dialup error 634: Cannot your computer on the remote network Dialup error 635: Unknown error Dialup error 636: The wrong device is attached to the port Dialup error 637: The string could not be converted Dialup error 638: The request has timed out Dialup error 639: No asynchronous net available Dialup error 640: A NetBIOS error has occurred Dialup error 641: The server cannot allocate NetBIOS resources needed to the client Dialup error 642: One of your NetBIOS names is already ed on the remote network Dialup error 643: A network adapter at the server failed Dialup error 644: You will not receive network message popups

Dialup error 645: Dialup error 646: Dialup error 647: Dialup error 648: Dialup error 649: Dialup error 650: Dialup error 651: Dialup error 652: Dialup error 653: .INF file section Dialup error 654: to an undefined macro Dialup error 655: section Dialup error 656: contains an undefined Dialup error 657: Dialup error 658: long Dialup error 659: Dialup error 660: Dialup error 661: Dialup error 662: section Dialup error 663: Dialup error 664: Dialup error 665: Dialup error 666: Dialup error 667: Dialup error 668: Dialup error 669: Dialup error 670: Dialup error 671: Dialup error 672: Dialup error 673: Dialup error 674: .INI file Dialup error 675: file Dialup error 676: Dialup error 677: Dialup error 678: Dialup error 679: Dialup error 680: Dialup error 681: Dialup error 682: Dialup error 683: Dialup error 684: Dialup error 685: Dialup error 686: Dialup error 687: Dialup error 688: Dialup error 689: Dialup error 690: Dialup error 691: the domain Dialup error 692: Dialup error 693: Dialup error 694:

Internal authentication error The is not permitted to log on at this time of day The is disabled The has expired The does not have remote access permission The remote access server is not responding Your modem (or other connecting device) has reported an error Unrecognised response from the device A macro required by the device was not found in the device A command or response in the device .INF file section refers The <message> macro was not found in the device .INF file The <defaultoff> macro in the device .INF file section macro The device .INF file could not be opened The device name in the device .INF or media .INI file is too The media .INI file refers to an unknown device name The device .INF file contains no responses for the command The device .INF file is missing a command Attempted to set a macro not listed in device .INF file The media .INI file refers to an unknown device type Cannot allocate memory The port is not configured for remote access Your modem (or other connecting device) is not functioning Cannot read the media .INI file The connection dropped The usage parameter in the media .INI file is invalid Cannot read the section name from the media .INI file Cannot read the device type from the media .INI file Cannot read the device name from the media .INI file Cannot read the usage from the media .INI file Cannot read the maximum connection BPS rate from the media Cannot read the maximum carrier BPS rate from the media .INI The line is busy A person answered instead of a modem There is no answer Cannot detect carrier There is no dial tone General error reported by device ERROR WRITING SECTIONNAME ERROR WRITING DEVICETYPE ERROR WRITING DEVICENAME ERROR WRITING MAXCONNECTBPS ERROR WRITING MAXCARRIERBPS ERROR WRITING USAGE ERROR WRITING DEFAULTOFF ERROR READING DEFAULTOFF ERROR EMPTY INI FILE Access denied because name and/or is invalid on Hardware failure in port or attached device ERROR NOT BINARY MACRO ERROR DCB NOT FOUND

Dialup error 695: ERROR STATE MACHINES NOT STARTED Dialup error 696: ERROR STATE MACHINES ALREADY STARTED Dialup error 697: ERROR PARTIAL RESPONSE LOOPING Dialup error 698: A response keyname in the device .INF file is not in the expected format Dialup error 699: The device response caused buffer overflow. Dialup error 700: The expanded command in the device .INF file is too long Dialup error 701: The device moved to a BPS rate not ed by the COM driver Dialup error 702: Device response received when none expected Dialup error 703: ERROR INTERACTIVE MODE Dialup error 704: ERROR BAD CALLBACK NUMBER Dialup error 705: ERROR INVALID AUTH STATE Dialup error 706: ERROR WRITING INITBPS Dialup error 707: X.25 diagnostic indication Dialup error 708: The has expired Dialup error 709: Error changing on domain Dialup error 710: Serial overrun errors were detected while communicating with your modem Dialup error 711: RasMan initialisation failure. Check the event log. Dialup error 712: Biplex port is initialising. Wait a few seconds and redial Dialup error 713: No active ISDN lines are available Dialup error 714: Not enough ISDN channels are available to make the call Dialup error 715: Too many errors occurred because of poor phone line quality Dialup error 716: The remote access IP configuration is unusable Dialup error 717: No IP addresses are available in the static pool of remote access IP addresses Dialup error 718: PPP timeout Dialup error 719: PPP terminated by remote machine Dialup error 720: No PPP control protocols configured Dialup error 721: Remote PPP peer is not responding Dialup error 722: The PPP packet is invalid Dialup error 723: The phone number, including prefix and suffix, is too long Dialup error 724: The IPX protocol cannot dial-out on the port because the computer is an IPX router Dialup error 725: The IPX protocol cannot dial-in on the port because the IPX router is not installed Dialup error 726: The IPX protocol cannot be used for dial-out on more than one port at a time Dialup error 727: Cannot access TCFG.DLL Dialup error 728: Cannot find an IP adaptor bound to remote access Dialup error 729: SLIP cannot be used unless the IP protocol is installed Dialup error 730: Computer registration is not complete Dialup error 731: The protocol is not configured Dialup error 732: The PPP negotiation is not converging Dialup error 733: The PPP control protocol for this network protocol is not available on the server Dialup error 734: The PPP link control protocol terminated Dialup error 735: The requested address was rejected by the server Dialup error 736: The remote computer terminated the control protocol Dialup error 737: Loopback detected Dialup error 738: The server did not assign an address Dialup error 739: The remote server cannot use the Windows NT encrypted Dialup error 740: The TAPI devices configured for Remote Access failed to initialise or were not installed correctly Dialup error 741: The local computer does not encryption Dialup error 742: The remote server does not encryption Dialup error 743: The remote server requires encryption

Dialup error 744: Cannot use the IPX net number assigned by the remote server. Check the event log. Dialup error 745: An essential file is missing Dialup error 746: An essential file failed to initialise Dialup error 747: MAC not found Dialup error 748: The system timed out while trying to load an essential file Dialup error 749: Invalid phone number Dialup error 750: Invalid authentication attempt Dialup error 751: The callback number contains an invalid character. Only the following characters are allowed: 0 to 9, T, P, W, (,), -, @, and space Dialup error 752: A syntax error was encountered while processing a script Dialup error 753: The connection could not be disconnected because it was created by the multi-protocol router Dialup error 754: The system could not find the multi-link bundle Dialup error 755: The system cannot perform automated dial because this entry has a custom dialler specified Dialup error 756: This connection is already being dialed Dialup error 757: Remote access services could not be started automatically. Additional information is provided in the event log. Dialup error 758: Internet connection sharing is already enabled on the connection Dialup error 760: An error occurred while routing capabilities were being enabled Dialup error 761: An error occurred while Internet connection sharing was being enabled for the connection Dialup error 763: Internet connection sharing cannot be enabled. There are two or more LAN connections in addition to the connection to be shared. Dialup error 764: No smart card reader is installed Dialup error 765: Internet connection sharing cannot be enabled. A LAN connection is already configured with the IP address required for automatic IP addressing. Dialup error 766: The system could not find any certificate Dialup error 767: Internet connection sharing cannot be enabled. The LAN connection selected on the private network has more than one IP address configured. Reconfigure the LAN connection with a single IP address before enabling Internet connection sharing. Dialup error 768: The connection attempt failed because of failure to encrypt data Dialup error 769: The specified destination is not reachable Dialup error 770: The remote machine rejected the connection attempt Dialup error 771: The connection attempt failed because the network is busy Dialup error 772: The remote computer's network hardware is incompatible with the type of call requested Dialup error 773: The connection attempt failed because the destination number has changed Dialup error 774: The connection attempt failed because of a temporary failure. Try connecting again. Dialup error 775: The call was blocked by the remote computer Dialup error 776: The call could not be connected because the destination has invoked the Do Not Disturb feature Dialup error 777: The connection attempt failed because the modem on the remote computer is out of order Dialup error 778: It was not possible to the identity of the server Dialup error 779: To dial out using this connection, you must use a smart card Dialup error 780: An attempted function is not valid for this connection Dialup error 781: The encryption attempt failed because no valid certificate was found Dialup error 782: Network Address Translation (NAT) is currently installed as a routing protocol, and must be removed before enabling Internet Connection Sharing

Dialup error 783: Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adaptor is connected before enabling Internet Connection Sharing. Dialup error 784: You cannot dial using this connection at logon time, because it is configured to use a name different than the one on the smart card. If you want to use it at logon time, you must configure it to use the name on the smart card Dialup error 785: You cannot dial using this connection at logon time, because it is not configured to use a smart card. If you want to use it at logon time, you must edit the properties of this connection so that it uses a smart card Dialup error 786: The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication Dialup error 787: The L2TP connection attempt failed because the security layer could not authenticate the remote computer Dialup error 788: The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer Dialup error 789: The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer Dialup error 790: The L2TP connection attempt failed because certificate validation on the remote computer failed Dialup error 791: The L2TP connection attempt failed because security policy for the connection was not found Dialup error 792: The L2TP connection attempt failed because security negotiation timed out Dialup error 793: The L2TP connection attempt failed because an error occurred while negotiating security Dialup error 794: The Framed Protocol RADIUS attribute for this is not PPP Dialup error 795: The tunnel type RADIUS attribute for this is not correct Dialup error 796: The service type RADIUS attribute for this is neither framed nor callback framed Dialup error 797: A connection to the remote computer could not be established because the modem was not found or was busy Dialup error 798: A certificate could not be found that can be used with this Extensible Authentication Protocol Dialup error 799: Internet Connection Sharing (ICS) cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Please ensure that no other client on the network is configured to use 192.168.0.1 Dialup error 800: Unable to establish the VPN connection. The VPN server may be un-reachable, or security parameters may not be configured properly for this connection Dialup error 995: Operation aborted Dialup error 1382: Maximum length exceeded Dialup error 1793: expired Dialup error 2250: Network connection does not exist