Ec6013-advanced Microprocessors And Microcontrollers 6bu3b
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Ec6013-advanced Microprocessors And Microcontrollers as PDF for free.
More details w3441
- Words: 2,990
- Pages: 8
www.vidyarthiplus.com VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur – 603 203 DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING
Question Bank
VII SEMESTER ECE EC6013 Advanced Microprocessors and Microcontrollers Regulation – 2013 2016 – 17 ODD Sem
Prepared by Dr. C. Amali, Assistant Professor/ECE Mr. C. Saravanakumar, Assistant Professor/ECE
www.Vidyarthiplus.com
UNIT I HIGH PERFORMANCE CISC ARCHITECTURE – PENTIUM
www.vidyarthiplus.com
U Architecture- Bus Operations – Pipelining – Branch predication – floating point unit- Operating Modes –Paging – Multitasking – Exception and Interrupts – Instruction set – addressing modes – Programming the Pentium processor.
Q.No 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 1.
2.
3.
4.
5. 6. 7. 8. 9. 10.
11.
PART A Questions Compare RISC and CISC. What is meant by paging? Define multitasking. What are the advantages of instruction pipelining? Investigate the effects of pipeline hazards during execution process? Describe the operating modes of Pentium processor. Illustrate the merits of RISC. Discuss the limitations of paging mechanism. How many memory banks are available in Pentium processor? Classify the addressing modes with its types. Write down indirect with post increment addressing modes. Differentiate page and segment. Validate the need of page fault exception in memory management. List the general purpose s of Pentium processor. What are the advantages of segmented memory? Recall the different types of pipeline hazards? Point out the system management mode of operation for the Pentium? How an interrupt is processed in a Pentium processor? Justify that Pentium is a super scalar processor. How do you apply branch prediction in Pentium processor? PART –B (i) With suitable examples, explain the addressing modes available in Pentium processor? (10) (ii) Write short notes on file. (6) (i) Evaluate the techniques used to minimize the hazards in a pipeline processor. (10) (ii) Discuss about the structure and the details of IVT. (6) (i) Discuss in detail about how the instruction level parallelism achieved in microprocessor. (8) (ii) Summarize the concepts of paging with respect to Pentium processor.(8) Compare the following architectures in detail (i)RISC(8) (ii)CISC (8) (i) Illustrate the design considerations of page size in paging system. (10) (ii) Sketch the CISC processor with main components? (6) (i) Explain the different operating modes of Pentium processor? (8) (ii) Differentiate multitasking from multithreading. (8) Discuss the hardware signals and superscalar architecture of Pentium processor? (16) Elaborate on the on chip floating point unit of Pentium processor? (16) Write short notes on (i) Pipelining (8) (ii) Multitasking (8) (i) Classify the different group of instructions in Pentium processor?(10) (ii)Demonstrate on assembly language programming of Pentium processor with examples. (6) Discuss the integer and floating point pipeline operation in Pentium
www.Vidyarthiplus.com
BT Level BTL 4 BTL 1 BTL 1 BTL 1 BTL 6 BTL 2 BTL 3 BTL 6 BTL 2 BTL 4 BTL 1 BTL 4 BTL 5 BTL 1 BTL 2 BTL 1 BTL 2 BTL 3 BTL 5 BTL 3
Competence Analyze Create Understand Apply Create Understand Analyze Analyze Evaluate Understand Understand Apply Evaluate Apply
BTL 1
BTL 5
Evaluate
BTL2
Understand
BTL 4
Analyze
BTL 3
Apply
BTL 4
Analyze
BTL 2
Understand
BTL 6 BTL 1
Create
BTL 4
Analyze
BTL 2
Understand
processor? (16) 12. (i)How will you use multitasking environment in Pentium processor? (8) BTL 3 (ii) Illustrate on branch group instructions of Pentium. (8) 13. What are pipeline hazards? Discuss them in detail. (16) BTL 1 14. (i) List and explain the interrupt processing techniques in Pentium BTL 1 processor? (10) (ii) Write about exceptions in Pentium processor. (6)
www.vidyarthiplus.com
Apply
UNIT II HIGH PERFORMANCE RISC ARCHITECTURE – ARM Arcon RISC Machine – Architectural Inheritance – Core & Architectures - s – Pipeline - Interrupts – ARM organization - ARM processor family – Co-processors - ARM instruction set- Thumb Instruction set - Instruction cycle timings - The ARM Programmer‟ s model – ARM Development tools – ARM Assembly Language Programming - C programming – Optimizing ARM Assembly Code – Optimized Primitives.
PART A Q.No 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 1. 2. 3. 4. 5.
Questions
BT Level Point out the ARMs visible s BTL 1 Summarize how ARM handles the exceptions BTL2 Identify the need of thumb instruction set? BTL2 Mention any two of the thumb instruction set BTL2 Write down the ARM SR format BTL 1 State any two data transfer and control flow instructions BTL2 What facts would you select to list the features of the ARM instruction set BTL5 Formulate necessary code using ARM assembly language program for BTL6 creating a delay Illustrate Branch with Link and exchange instruction in ARM Processor BTL4 Identify the application of SWI instruction? BTL3 Which features does ARM have in common with many other RISC BTL4 architectures? Suggest the rules which apply to ARM data processing instructions BTL3 Evaluate the allocation of s in ARM processor BTL5 Define pointer aliasing? BTL 1 How to avoid pointer aliasing BTL3 Categorize the tricks used to optimize primitives BTL4 Define Primitives BTL 1 What is meant by Profiler? BTL 1 Propose any 3 tools used to optimize ARM assembly code BTL6 Write about Loop unrolling? BTL 1 PART –B (i)Define the architectural inheritance of ARM processor and explain? (8) BTL1 (ii)Name the principle features of ARM architecture (8) (i) List the different ARM Development Tools and describe about them(10) BTL1 (ii)Illustrate the ARM Programmers Model with necessary diagrams (6) State in detail about the BTL1 (i)3 stage pipelined ARM Organization(8) (ii) 5 stage pipelined ARM Organization(8) (i) Explain the bus architecture of an ARM Processor? (8) BTL4 (i)Discuss in detail the different modes of operation of ARM processor? (8) (i)Define Addressing mode? List the addressing modes of ARM BTL1
www.Vidyarthiplus.com
Competence Understand Understand Understand Understand Evaluate Create Analyze Apply Analyze Apply Evaluate Apply Analyze Create
Analyze
processor?(6) (ii)Explain the addressing modes of an ARM Processor with examples? (10) (i) Examine the implementation of branch, call and return instructions in ARM instruction set? (12) (ii) Write a program to find the product of two numbers? (4) Illustrate the thumb instruction set of ARM processor with examples in detail (16) Describe the organization of U of a high performance RISC architecture.(16) (ii)Write a program to arrange N number of data in ascending order (8) (ii)Write a code using ARM instructions to calculate square root using Newton Raphson Iterations. (8) (i) Choose an approach to remove the test for N being zero that occurs in a for loop? (8) (ii) Develop the points for the efficient use of C types (8) How to construct loop structures (i) using fixed number of iterations (8) (ii) using variable number of iterations (8) (i) Summarize the Transcendental functions in ARM processor. (8) (ii) Outline the concept of converting divide into multiples. (8) (i) Conclude on Optimizing the assembly code in ARM processor (12) (ii) Point out the factors that influence the efficiency of loops structure(4) (i) Analyze the structure arrangement in programming ARM processor. (8) (ii)Propose the accomplishment of Push and Pop instructions in ARM. (8)
www.vidyarthiplus.com
6. 7. 8. 9.
10.
11. 12. 13. 14.
BTL4
Analyze
BTL2
Understanding
BTL2
Understanding
BTL6
Create
BTL3
Apply
BTL3
Apply
BTL2
Understanding
BTL5
Evaluate
BTL4
Analyze
UNIT III UNIT III ARM APPLICATION DEVELOPMENT Introduction to DSP on ARM –FIR filter – IIR filter – Discrete fourier transform – Exception handling – Interrupts – Interrupt handling schemes- Firmware and bootloader – Embedded Operating systems – Integrated Development Environment- STDIO Libraries – Peripheral Interface – Application of ARM Processor - Caches – Memory protection Units – Memory Management units – Future ARM Technologies. PART A Q.No 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Questions
BT Level Identify the role of Memory Management Unit BTL2 How are relocation s used in memory management unit? BTL3 Describe how to represent a digital signal for ARM processor BTL4 Develop the guidelines to write DSP code for ARM? BTL6 What happens when an exception changes mode of the core? BTL4 Prioritize the exceptions of ARM processor? BTL6 Summarize about interrupt latency? BTL2 Write the difference between firmware and bootloader? BTL3 What is context switching? BTL 1 Define a cache memory? BTL 1 Draw the Relationship that a cache has between the processor core and BTL5 main memory Point out the formula to calculate the cache hit rate BTL 1 Distinguish between caches flush and clean? BTL3 What did you infer from cache Lock down? BTL5 Illustrate the rules that govern the protected regions of memory? BTL2
www.Vidyarthiplus.com
Competence Understand Apply Analyze Create Analyze Create Understand Apply Evaluate Apply Evaluate Understand
16. 17. 18. 19. 20. 1. 2. 3. 4. 5.
6.
7. 8. 9. 10.
11.
12.
13. 14.
What do you mean by Virtual address and Physical address Name the functions of ARM MMU List the replacement policies that are ed by ARM cached core? Describe briefly cache miss penalty? Outline the different interrupt handling schemes of ARM processor PART –B (i)Discuss the interrupt handling schemes of ARM processor (10) (ii)Summarize its Advantages and Disadvantages (6) (i)List the guidelines to write code for FIR filters on ARM?(6) (ii)Implement a block filter in ARM processor using DSP concepts?(10) Design an IIR filter using ARM7TDMI processor for 1 x 2 block (16) Develop a code to implement radix – 4 FFT using ARM processor (16) In accordance to ARM processor , write in detail about (i)The exceptions and its associated modes(8) (ii) Exception Priorities(8) (i)Describe about the interrupts and its associated usage in ARM processor(10) (ii)How would you enable and disable FIQ and IRQ exceptions(6) Design a Basic interrupt stack and discuss how to implement in ARM(16) Illustrate the firmware for an ARM processor with an example (16)
www.vidyarthiplus.com
BTL 1 BTL 1 BTL 1 BTL2 BTL4
Understand Analyze
BTL2
Understand
BTL3
Apply
BTL4 Analyze BTL6 Create BTL 1
BTL3
Apply
BTL4 BTL2
Analyze Understand
Write in detail about the fundamental components of Embedded operating BTL 1 systems (16) (i)What are the basic cache architecture and the operation of Cache BTL 1 controller (8) (ii)Name the different methods to Lock down cache. Explain in detail with necessary code snippets (8) (i)Demonstrate the cache policies for replacement and allocation during a BTL2 Understand cache miss (8) (ii)With respect to ARM processor, explain the concepts of flushing and cleaning of cache.(8) (i)Code the ARM processor to set the starting address, size of a region, and BTL5 Evaluate the enable bit of Memory (8) (ii)Summarize about initializing MPU, caches and Write Buffer (8) Design a Memory protection unit with respect to ARM application BTL4 Analyze development (16) Write Short notes on BTL 1 (i)Working of Virtual memory systems. (8) (ii)Translation Lookaside buffer (8)
UNIT IV MOTOROLA 68HC11 MICROCONTROLLERS Instruction set addressing modes – operating modes- Interrupt system- RTC-Serial Communication Interface – A/D Converter PWM and UART.
Q.No 1. 2. 3. 4. 5. 6. 7.
PART A Questions Examine the major features of UART What are the built-in peripherals in 68HC11? Identify the features of 68HC11 microcontrollers? Discuss the functions of CCR in 68HC11? When did the conversion complete flag will set in 68HC11? How to program 68HC11 to operate at 9600 band? Name the interrupts used in 68HC11.
www.Vidyarthiplus.com
BT Level BTL3 BTL 1 BTL3 BTL6 BTL5 BTL6 BTL 1
Competence Apply Apply Create Evaluate Create
8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 1.
2.
3.
4.
5. 6. 7. 8.
9. 10. 11. 12. 13. 14.
Mention about the operating modes of 68HC11 Microcontroller? What is the use of real time clock? State the s of 68HC11? Evaluate the use of test instructions available in 68HC11? Distinguish between SCI and SPI? Define polling? Classify the different techniques of A/D conversion? Write about semaphores? Point out any 2 features of internal ADC of MC68HC11? Discuss the different techniques to poll a interrupt? Describe about the single chip operating mode of Motorola processor. How would you use Pulse Width modulation? Differentiate full duplex from Half duplex communication PART –B (i) Name the various operating modes of Motorola 68HC11 Microcontroller. (4) (ii) Summarize about each operating mode in detail (12) Demonstrate the following with respect to 68HC11 (i) Interrupt system of microcontroller? (8) (ii) UART interface with Motorola microcontroller? (8) (i) Explain the concept of serial communication with a suitable application in MC68HC11? (8) (ii) Illustrate the Arithmetic instructions of 68HC11 with suitable examples? (8) Discuss in detail about (i) ADC unit features in 68HC11. (8) (ii) A/D conversion process in 68HC11 microcontroller. (8) (i) Summarize the different addressing modes used in 68HC11? (4) (ii) Elaborate each addressing mode and explain with examples?(12) Using PWM control of 68HC11, write a program to control the speed of the Motor? (16) Realize 68HC11 microcontroller environments to transmit and receive data at different bits rates in serial fashion. (16) Outline the Concepts of (i)Real Time clock in 68HC11. (8) (ii)Interrupt vectors and its priorities.(8) List and explain in detail about the instruction set of 68HC11 with examples? (16) How the different types of polling system are used to service an interrupt in 68HC11? (16) Suggest a design to interface Keyboard and Printer using Interrupts in 68HC11.(16) With a suitable diagram, describe the architecture of Motorola 68HC11? (16) List the problems that occur in serial Port printer interface and choose a technique to overcome those difficulties? Illustrate with diagrams. (16) Illustrate the interfacing details with ing diagrams for SCI receive only Interrupt Interface and SCI transmit only Interrupt Interface. (16)
www.vidyarthiplus.com
BTL 1 BTL2 BTL 1 BTL5 BTL4 BTL 1 BTL4 BTL 1 BTL2 BTL2 BTL2 BTL3 BTL4
Understand Evaluate Analyze Analyze Understand Understand Understand Apply Analyze
BTL 1
BTL3
Apply
BTL4
Analyze
BTL2
Understand
BTL2
Understand
BTL4
Analyze
BTL5
Evaluate
BTL2
Understand
BTL 1 BTL 1 BTL3
Apply
BTL 1 BTL6
Create
BTL4
Analyze
UNIT V PIC MICROCONTROLLER U Architecture – Instruction set – interrupts- Timers- I2C Interfacing –UART- A/D Converter –PWM and introduction to C-Compilers.
www.Vidyarthiplus.com
Q.No 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 1. 2.
3. 4.
5. 6. 7. 8. 9. 10.
PART A www.vidyarthiplus.com Questions
BT Level What are the features of Harvard architecture? BTL 1 Illustrate the steps required to perform read/write operation using I2C bus? BTL 3 What are the interrupts in PIC microcontroller? BTL 1 Test the functions of retlw and retfie instructions? BTL 6 Assess the relationship between length of the PC and memory size? BTL 5 Sketch the status format in PIC micro controller. BTL 3 Evaluate the role of INDF in PIC micro controller. BTL 5 Analyze the use of C module in PIC microcontroller? BTL 4 Draw the format of a data transfer packet of I2C. BTL 2 Specify the different interrupt resources present in the PIC microcontroller? BTL 2 Demonstrate the role of I2C interfacing in PIC microcontroller. BTL 4 What is the use of PCLATH in program memory? BTL 1 What are the applications of PWM output? BTL 1 Compare serial and parallel transmission. BTL 4 How many I/O ports of ed in PIC micro controller? BTL 2 What are the features of ADC in PIC? BTL 1 Elaborate the use of Watchdog timer in PIC micro controller BTL 6 Explain about INTCON and ADCON s BTL 2 Write a PIC microcontroller program for decrementing a 16 bit counter. BTL 3 Write a short note on C-compiler. BTL 1 PART –B (i) Describe the architecture of PIC micro controllers. (10) BTL 2 (ii) Discuss the features of bank in PIC micro controller. (6) (i) Explain the data communication protocol of I2C bus. (8) BTL 2 (ii) Discuss in detail the organization of program and data memory of PIC microcontrollers? (8) (i) What are the architectural features of PIC microcontrollers? (6) BTL 1 (ii) Draw and explain the interrupt structure of PIC microcontrollers. (10) Realize the following applications using PIC Microcontroller BTL 4 (i)To measure the received Pulse Width and control a DC motor based on the pulse width. (8) (ii)Burglar Alarm. (8) (i) Classify the timers of PIC microcontroller and explain it. (8) BTL 4 (ii)Demonstrate the role of an A/D in a PIC microcontroller. (8) (i)Write a program to turn on a LED at interval of one second (8) BTL 3 (ii) Illustrate the various features of I2C bus for peripheral chip access. Write short notes on (i) C Compiler (8) BTL 1 (ii) C Module in PIC (8) Propose an architecture of PIC microcontroller with design considerations in BTL 6 detail? (16) (i) Write a note on PWM in PIC microcontroller. (6) BTL 1 (ii) Discuss briefly about the UART interface of PIC micro controller. (10) Enumerate on (i) Interrupt service routine in PIC. (8) BTL 1 (ii) I/O port expansion in PIC.(8)
Competence Apply Create Evaluate Apply Evaluate Analyze Understand Understand Analyze Analyze Understand Create Understand Apply Understand Understand
Analyze
Analyze Apply Create
11. (i)Describe how the timers are used as event counters in PIC BTL 2 Understand microcontroller (10) (ii)Explain interrupts handling in PIC micro controller. 12. (i)Describe the instruction set of PIC microcontroller and explain the BTL 3 Apply programming of PIC microcontroller with suitable examples. (16)
www.Vidyarthiplus.com
13. (i)Justify how the PIC microcontroller s Harvard architecture? BTL 5 (ii)Evaluate how the peripheral devices are interfaced with PIC. 14. (i)Analyze the merits and demerits of asynchronous mode of BTL 4 transmission.(6) (ii)Explain about the asynchronous transmission and reception in PIC microcontroller. (10)
www.vidyarthiplus.com
www.Vidyarthiplus.com
Evaluate Analyze
Question Bank
VII SEMESTER ECE EC6013 Advanced Microprocessors and Microcontrollers Regulation – 2013 2016 – 17 ODD Sem
Prepared by Dr. C. Amali, Assistant Professor/ECE Mr. C. Saravanakumar, Assistant Professor/ECE
www.Vidyarthiplus.com
UNIT I HIGH PERFORMANCE CISC ARCHITECTURE – PENTIUM
www.vidyarthiplus.com
U Architecture- Bus Operations – Pipelining – Branch predication – floating point unit- Operating Modes –Paging – Multitasking – Exception and Interrupts – Instruction set – addressing modes – Programming the Pentium processor.
Q.No 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 1.
2.
3.
4.
5. 6. 7. 8. 9. 10.
11.
PART A Questions Compare RISC and CISC. What is meant by paging? Define multitasking. What are the advantages of instruction pipelining? Investigate the effects of pipeline hazards during execution process? Describe the operating modes of Pentium processor. Illustrate the merits of RISC. Discuss the limitations of paging mechanism. How many memory banks are available in Pentium processor? Classify the addressing modes with its types. Write down indirect with post increment addressing modes. Differentiate page and segment. Validate the need of page fault exception in memory management. List the general purpose s of Pentium processor. What are the advantages of segmented memory? Recall the different types of pipeline hazards? Point out the system management mode of operation for the Pentium? How an interrupt is processed in a Pentium processor? Justify that Pentium is a super scalar processor. How do you apply branch prediction in Pentium processor? PART –B (i) With suitable examples, explain the addressing modes available in Pentium processor? (10) (ii) Write short notes on file. (6) (i) Evaluate the techniques used to minimize the hazards in a pipeline processor. (10) (ii) Discuss about the structure and the details of IVT. (6) (i) Discuss in detail about how the instruction level parallelism achieved in microprocessor. (8) (ii) Summarize the concepts of paging with respect to Pentium processor.(8) Compare the following architectures in detail (i)RISC(8) (ii)CISC (8) (i) Illustrate the design considerations of page size in paging system. (10) (ii) Sketch the CISC processor with main components? (6) (i) Explain the different operating modes of Pentium processor? (8) (ii) Differentiate multitasking from multithreading. (8) Discuss the hardware signals and superscalar architecture of Pentium processor? (16) Elaborate on the on chip floating point unit of Pentium processor? (16) Write short notes on (i) Pipelining (8) (ii) Multitasking (8) (i) Classify the different group of instructions in Pentium processor?(10) (ii)Demonstrate on assembly language programming of Pentium processor with examples. (6) Discuss the integer and floating point pipeline operation in Pentium
www.Vidyarthiplus.com
BT Level BTL 4 BTL 1 BTL 1 BTL 1 BTL 6 BTL 2 BTL 3 BTL 6 BTL 2 BTL 4 BTL 1 BTL 4 BTL 5 BTL 1 BTL 2 BTL 1 BTL 2 BTL 3 BTL 5 BTL 3
Competence Analyze Create Understand Apply Create Understand Analyze Analyze Evaluate Understand Understand Apply Evaluate Apply
BTL 1
BTL 5
Evaluate
BTL2
Understand
BTL 4
Analyze
BTL 3
Apply
BTL 4
Analyze
BTL 2
Understand
BTL 6 BTL 1
Create
BTL 4
Analyze
BTL 2
Understand
processor? (16) 12. (i)How will you use multitasking environment in Pentium processor? (8) BTL 3 (ii) Illustrate on branch group instructions of Pentium. (8) 13. What are pipeline hazards? Discuss them in detail. (16) BTL 1 14. (i) List and explain the interrupt processing techniques in Pentium BTL 1 processor? (10) (ii) Write about exceptions in Pentium processor. (6)
www.vidyarthiplus.com
Apply
UNIT II HIGH PERFORMANCE RISC ARCHITECTURE – ARM Arcon RISC Machine – Architectural Inheritance – Core & Architectures - s – Pipeline - Interrupts – ARM organization - ARM processor family – Co-processors - ARM instruction set- Thumb Instruction set - Instruction cycle timings - The ARM Programmer‟ s model – ARM Development tools – ARM Assembly Language Programming - C programming – Optimizing ARM Assembly Code – Optimized Primitives.
PART A Q.No 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 1. 2. 3. 4. 5.
Questions
BT Level Point out the ARMs visible s BTL 1 Summarize how ARM handles the exceptions BTL2 Identify the need of thumb instruction set? BTL2 Mention any two of the thumb instruction set BTL2 Write down the ARM SR format BTL 1 State any two data transfer and control flow instructions BTL2 What facts would you select to list the features of the ARM instruction set BTL5 Formulate necessary code using ARM assembly language program for BTL6 creating a delay Illustrate Branch with Link and exchange instruction in ARM Processor BTL4 Identify the application of SWI instruction? BTL3 Which features does ARM have in common with many other RISC BTL4 architectures? Suggest the rules which apply to ARM data processing instructions BTL3 Evaluate the allocation of s in ARM processor BTL5 Define pointer aliasing? BTL 1 How to avoid pointer aliasing BTL3 Categorize the tricks used to optimize primitives BTL4 Define Primitives BTL 1 What is meant by Profiler? BTL 1 Propose any 3 tools used to optimize ARM assembly code BTL6 Write about Loop unrolling? BTL 1 PART –B (i)Define the architectural inheritance of ARM processor and explain? (8) BTL1 (ii)Name the principle features of ARM architecture (8) (i) List the different ARM Development Tools and describe about them(10) BTL1 (ii)Illustrate the ARM Programmers Model with necessary diagrams (6) State in detail about the BTL1 (i)3 stage pipelined ARM Organization(8) (ii) 5 stage pipelined ARM Organization(8) (i) Explain the bus architecture of an ARM Processor? (8) BTL4 (i)Discuss in detail the different modes of operation of ARM processor? (8) (i)Define Addressing mode? List the addressing modes of ARM BTL1
www.Vidyarthiplus.com
Competence Understand Understand Understand Understand Evaluate Create Analyze Apply Analyze Apply Evaluate Apply Analyze Create
Analyze
processor?(6) (ii)Explain the addressing modes of an ARM Processor with examples? (10) (i) Examine the implementation of branch, call and return instructions in ARM instruction set? (12) (ii) Write a program to find the product of two numbers? (4) Illustrate the thumb instruction set of ARM processor with examples in detail (16) Describe the organization of U of a high performance RISC architecture.(16) (ii)Write a program to arrange N number of data in ascending order (8) (ii)Write a code using ARM instructions to calculate square root using Newton Raphson Iterations. (8) (i) Choose an approach to remove the test for N being zero that occurs in a for loop? (8) (ii) Develop the points for the efficient use of C types (8) How to construct loop structures (i) using fixed number of iterations (8) (ii) using variable number of iterations (8) (i) Summarize the Transcendental functions in ARM processor. (8) (ii) Outline the concept of converting divide into multiples. (8) (i) Conclude on Optimizing the assembly code in ARM processor (12) (ii) Point out the factors that influence the efficiency of loops structure(4) (i) Analyze the structure arrangement in programming ARM processor. (8) (ii)Propose the accomplishment of Push and Pop instructions in ARM. (8)
www.vidyarthiplus.com
6. 7. 8. 9.
10.
11. 12. 13. 14.
BTL4
Analyze
BTL2
Understanding
BTL2
Understanding
BTL6
Create
BTL3
Apply
BTL3
Apply
BTL2
Understanding
BTL5
Evaluate
BTL4
Analyze
UNIT III UNIT III ARM APPLICATION DEVELOPMENT Introduction to DSP on ARM –FIR filter – IIR filter – Discrete fourier transform – Exception handling – Interrupts – Interrupt handling schemes- Firmware and bootloader – Embedded Operating systems – Integrated Development Environment- STDIO Libraries – Peripheral Interface – Application of ARM Processor - Caches – Memory protection Units – Memory Management units – Future ARM Technologies. PART A Q.No 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Questions
BT Level Identify the role of Memory Management Unit BTL2 How are relocation s used in memory management unit? BTL3 Describe how to represent a digital signal for ARM processor BTL4 Develop the guidelines to write DSP code for ARM? BTL6 What happens when an exception changes mode of the core? BTL4 Prioritize the exceptions of ARM processor? BTL6 Summarize about interrupt latency? BTL2 Write the difference between firmware and bootloader? BTL3 What is context switching? BTL 1 Define a cache memory? BTL 1 Draw the Relationship that a cache has between the processor core and BTL5 main memory Point out the formula to calculate the cache hit rate BTL 1 Distinguish between caches flush and clean? BTL3 What did you infer from cache Lock down? BTL5 Illustrate the rules that govern the protected regions of memory? BTL2
www.Vidyarthiplus.com
Competence Understand Apply Analyze Create Analyze Create Understand Apply Evaluate Apply Evaluate Understand
16. 17. 18. 19. 20. 1. 2. 3. 4. 5.
6.
7. 8. 9. 10.
11.
12.
13. 14.
What do you mean by Virtual address and Physical address Name the functions of ARM MMU List the replacement policies that are ed by ARM cached core? Describe briefly cache miss penalty? Outline the different interrupt handling schemes of ARM processor PART –B (i)Discuss the interrupt handling schemes of ARM processor (10) (ii)Summarize its Advantages and Disadvantages (6) (i)List the guidelines to write code for FIR filters on ARM?(6) (ii)Implement a block filter in ARM processor using DSP concepts?(10) Design an IIR filter using ARM7TDMI processor for 1 x 2 block (16) Develop a code to implement radix – 4 FFT using ARM processor (16) In accordance to ARM processor , write in detail about (i)The exceptions and its associated modes(8) (ii) Exception Priorities(8) (i)Describe about the interrupts and its associated usage in ARM processor(10) (ii)How would you enable and disable FIQ and IRQ exceptions(6) Design a Basic interrupt stack and discuss how to implement in ARM(16) Illustrate the firmware for an ARM processor with an example (16)
www.vidyarthiplus.com
BTL 1 BTL 1 BTL 1 BTL2 BTL4
Understand Analyze
BTL2
Understand
BTL3
Apply
BTL4 Analyze BTL6 Create BTL 1
BTL3
Apply
BTL4 BTL2
Analyze Understand
Write in detail about the fundamental components of Embedded operating BTL 1 systems (16) (i)What are the basic cache architecture and the operation of Cache BTL 1 controller (8) (ii)Name the different methods to Lock down cache. Explain in detail with necessary code snippets (8) (i)Demonstrate the cache policies for replacement and allocation during a BTL2 Understand cache miss (8) (ii)With respect to ARM processor, explain the concepts of flushing and cleaning of cache.(8) (i)Code the ARM processor to set the starting address, size of a region, and BTL5 Evaluate the enable bit of Memory (8) (ii)Summarize about initializing MPU, caches and Write Buffer (8) Design a Memory protection unit with respect to ARM application BTL4 Analyze development (16) Write Short notes on BTL 1 (i)Working of Virtual memory systems. (8) (ii)Translation Lookaside buffer (8)
UNIT IV MOTOROLA 68HC11 MICROCONTROLLERS Instruction set addressing modes – operating modes- Interrupt system- RTC-Serial Communication Interface – A/D Converter PWM and UART.
Q.No 1. 2. 3. 4. 5. 6. 7.
PART A Questions Examine the major features of UART What are the built-in peripherals in 68HC11? Identify the features of 68HC11 microcontrollers? Discuss the functions of CCR in 68HC11? When did the conversion complete flag will set in 68HC11? How to program 68HC11 to operate at 9600 band? Name the interrupts used in 68HC11.
www.Vidyarthiplus.com
BT Level BTL3 BTL 1 BTL3 BTL6 BTL5 BTL6 BTL 1
Competence Apply Apply Create Evaluate Create
8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 1.
2.
3.
4.
5. 6. 7. 8.
9. 10. 11. 12. 13. 14.
Mention about the operating modes of 68HC11 Microcontroller? What is the use of real time clock? State the s of 68HC11? Evaluate the use of test instructions available in 68HC11? Distinguish between SCI and SPI? Define polling? Classify the different techniques of A/D conversion? Write about semaphores? Point out any 2 features of internal ADC of MC68HC11? Discuss the different techniques to poll a interrupt? Describe about the single chip operating mode of Motorola processor. How would you use Pulse Width modulation? Differentiate full duplex from Half duplex communication PART –B (i) Name the various operating modes of Motorola 68HC11 Microcontroller. (4) (ii) Summarize about each operating mode in detail (12) Demonstrate the following with respect to 68HC11 (i) Interrupt system of microcontroller? (8) (ii) UART interface with Motorola microcontroller? (8) (i) Explain the concept of serial communication with a suitable application in MC68HC11? (8) (ii) Illustrate the Arithmetic instructions of 68HC11 with suitable examples? (8) Discuss in detail about (i) ADC unit features in 68HC11. (8) (ii) A/D conversion process in 68HC11 microcontroller. (8) (i) Summarize the different addressing modes used in 68HC11? (4) (ii) Elaborate each addressing mode and explain with examples?(12) Using PWM control of 68HC11, write a program to control the speed of the Motor? (16) Realize 68HC11 microcontroller environments to transmit and receive data at different bits rates in serial fashion. (16) Outline the Concepts of (i)Real Time clock in 68HC11. (8) (ii)Interrupt vectors and its priorities.(8) List and explain in detail about the instruction set of 68HC11 with examples? (16) How the different types of polling system are used to service an interrupt in 68HC11? (16) Suggest a design to interface Keyboard and Printer using Interrupts in 68HC11.(16) With a suitable diagram, describe the architecture of Motorola 68HC11? (16) List the problems that occur in serial Port printer interface and choose a technique to overcome those difficulties? Illustrate with diagrams. (16) Illustrate the interfacing details with ing diagrams for SCI receive only Interrupt Interface and SCI transmit only Interrupt Interface. (16)
www.vidyarthiplus.com
BTL 1 BTL2 BTL 1 BTL5 BTL4 BTL 1 BTL4 BTL 1 BTL2 BTL2 BTL2 BTL3 BTL4
Understand Evaluate Analyze Analyze Understand Understand Understand Apply Analyze
BTL 1
BTL3
Apply
BTL4
Analyze
BTL2
Understand
BTL2
Understand
BTL4
Analyze
BTL5
Evaluate
BTL2
Understand
BTL 1 BTL 1 BTL3
Apply
BTL 1 BTL6
Create
BTL4
Analyze
UNIT V PIC MICROCONTROLLER U Architecture – Instruction set – interrupts- Timers- I2C Interfacing –UART- A/D Converter –PWM and introduction to C-Compilers.
www.Vidyarthiplus.com
Q.No 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 1. 2.
3. 4.
5. 6. 7. 8. 9. 10.
PART A www.vidyarthiplus.com Questions
BT Level What are the features of Harvard architecture? BTL 1 Illustrate the steps required to perform read/write operation using I2C bus? BTL 3 What are the interrupts in PIC microcontroller? BTL 1 Test the functions of retlw and retfie instructions? BTL 6 Assess the relationship between length of the PC and memory size? BTL 5 Sketch the status format in PIC micro controller. BTL 3 Evaluate the role of INDF in PIC micro controller. BTL 5 Analyze the use of C module in PIC microcontroller? BTL 4 Draw the format of a data transfer packet of I2C. BTL 2 Specify the different interrupt resources present in the PIC microcontroller? BTL 2 Demonstrate the role of I2C interfacing in PIC microcontroller. BTL 4 What is the use of PCLATH in program memory? BTL 1 What are the applications of PWM output? BTL 1 Compare serial and parallel transmission. BTL 4 How many I/O ports of ed in PIC micro controller? BTL 2 What are the features of ADC in PIC? BTL 1 Elaborate the use of Watchdog timer in PIC micro controller BTL 6 Explain about INTCON and ADCON s BTL 2 Write a PIC microcontroller program for decrementing a 16 bit counter. BTL 3 Write a short note on C-compiler. BTL 1 PART –B (i) Describe the architecture of PIC micro controllers. (10) BTL 2 (ii) Discuss the features of bank in PIC micro controller. (6) (i) Explain the data communication protocol of I2C bus. (8) BTL 2 (ii) Discuss in detail the organization of program and data memory of PIC microcontrollers? (8) (i) What are the architectural features of PIC microcontrollers? (6) BTL 1 (ii) Draw and explain the interrupt structure of PIC microcontrollers. (10) Realize the following applications using PIC Microcontroller BTL 4 (i)To measure the received Pulse Width and control a DC motor based on the pulse width. (8) (ii)Burglar Alarm. (8) (i) Classify the timers of PIC microcontroller and explain it. (8) BTL 4 (ii)Demonstrate the role of an A/D in a PIC microcontroller. (8) (i)Write a program to turn on a LED at interval of one second (8) BTL 3 (ii) Illustrate the various features of I2C bus for peripheral chip access. Write short notes on (i) C Compiler (8) BTL 1 (ii) C Module in PIC (8) Propose an architecture of PIC microcontroller with design considerations in BTL 6 detail? (16) (i) Write a note on PWM in PIC microcontroller. (6) BTL 1 (ii) Discuss briefly about the UART interface of PIC micro controller. (10) Enumerate on (i) Interrupt service routine in PIC. (8) BTL 1 (ii) I/O port expansion in PIC.(8)
Competence Apply Create Evaluate Apply Evaluate Analyze Understand Understand Analyze Analyze Understand Create Understand Apply Understand Understand
Analyze
Analyze Apply Create
11. (i)Describe how the timers are used as event counters in PIC BTL 2 Understand microcontroller (10) (ii)Explain interrupts handling in PIC micro controller. 12. (i)Describe the instruction set of PIC microcontroller and explain the BTL 3 Apply programming of PIC microcontroller with suitable examples. (16)
www.Vidyarthiplus.com
13. (i)Justify how the PIC microcontroller s Harvard architecture? BTL 5 (ii)Evaluate how the peripheral devices are interfaced with PIC. 14. (i)Analyze the merits and demerits of asynchronous mode of BTL 4 transmission.(6) (ii)Explain about the asynchronous transmission and reception in PIC microcontroller. (10)
www.vidyarthiplus.com
www.Vidyarthiplus.com
Evaluate Analyze
Related Documents 3m3m1z
Advanced Microprocessors And Microcontrollers 5f233s
December 2019 51
Ec6013-advanced Microprocessors And Microcontrollers 6bu3b
December 2019 30
Microprocessors And Microcontrollers By Bakshi 2b2j51
October 2019 93
Microprocessors And Microcontrollers/interfacing With 8086 1md6d
July 2020 2
Microprocessors And Microcomputers 6bb4
March 2021 0