Fs1-2 Flash Storage System Help Desk Consultant Certification 3d5s1
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Fs1-2 Flash Storage System Help Desk Consultant Certification as PDF for free.
More details w3441
- Words: 11,218
- Pages: 76
This 60 question assessment test is the final component of the FS1 Flash Storage Storage System Field Delivery Consultant GLP. This assessment will allow you to test your knowledge level of the information learned from the FS1 Flash Storage System product training. ing with >80% of this assessment makes you eligible to become an Oracle Field Delivery Consultant for this product family.
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 1.
What is a Storage Domain?
Mark for Review
(1) Points A feature by which a specific class of storage can be dedicated to selected Controller A feature by which the Disks can be segmented to create discrete storage pools (*) A logical entity by which LUNs and filesystems can be grouped and dedicated to a specific purpose A grouping of selected RAID groups allowing the configuration of virtual FS1 systems
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 2. From which tab in the Oracle FS1 System Manager navigation pane can you view the current software version installed on system components? Mark for Review (1) Points Configure Protect (*) Monitor
Correct
Correct
3. Which two (2) pieces of information are displayed in the Status Bar of the Oracle FS1 System Manager? (Select two) Mark for Review (1) Points (Choose all correct answers) System status (*) Number of s logged in (*) Storage utilization Time Zone
Correct
Correct
4. Which document should be consulted for detailed instructions for installing connecting brackets and plates? Mark for Review (1) Points FS1 Flash Storage System and Interoperability Guide FS1 Flash Storage System 's Guide FS1 Flash Storage System Service Guide FS1 Flash Storage System Advanced Hardware Installation Guide (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
for Review (1) Points 4 (*) 2 3
5.
How many tiers of storage are available on the Oracle FS1-2 Mark
1
Correct
Correct
Page 1 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 6. What must be done within the Oracle FS1 System Manager to configure an SNMP trap? Mark for Review (1) Points Create an SNMP Host. (*) Create an Event Notification. Create a Reporting Schedule that enables SNMP traps. Create an Email Alert and select the SNMP category.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(1) Points
7.
How is Guided Maintenance initiated?
Mark for Review
Via the fscli only Via the Oracle FS1 System Manager (*) Via FS1's Customer Center Via the pdscli only
Correct
Correct!
8. power outage? (1) Points
What is the "Hold Up" time for the NVDRAM Write Cache after a Mark for Review
1 Month Infinite (*) 72 Hrs. 2 weeks 48 Hrs.
Correct
Correct!
9. By default, how many consecutive failed attempts will result in a FS1 being locked? Mark for Review (1) Points 10 2 5 (*) 3
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 10. Mark for Review (1) Points
Which statement best describes the performance of MaxRep 3.0?
Provides a 1.5x throughput increase as compared to the prior generation of MaxRep Engines Equals the performance of the prior generation of MaxRep Engines Provides a 2x throughput increase as compared to the prior generation of MaxRep Engines (*)
Provides a 10x throughput increase as compared to the prior generation of MaxRep Engines
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 2 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) System? (1) Points
11. Which statement is true concerning iSCSI on a FS1 Flash Storage Mark for Review
Requires the use of iSNS for management purposes Is ed by the FS1 Path Manager (*) Is ed only on networks with throughput of 1 GB or higher Requires a license
Correct
Domains? (2) Points
Correct 12. What 2 reasons show why a customer would implement Storage Mark for Review (Choose all correct answers)
Meet regulatory mandates (*) Meet security objectives (*) Speed application deployment Enable WORM on an archive
Incorrect try again.
Sorry, that is not correct. Please review the course content and
13. Select the correct advantage for the following architectural differentiator: QoS PLUS - Business Driven Auto-tiering Mark for Review (1) Points Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance (*) Multiple types of flash media options for different access patterns
Correct
Correct!
14. Select the correct advantage for the following architectural differentiator: Storage Domains Mark for Review (1) Points Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments (*) Multiple types of flash media options for different access patterns Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS
Correct
Correct!
15. Mark for Review (1) Points
What should be done before an Event Notification is created?
Determine the security level of the notification. Enable email notifications within the event notification. Enable email notifications on the network settings page. (*) that system logging is configured on the log host. Storage Domain configuration and performance information
Correct Previous
Correct Page 3 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 16.
What is the function of a Storage Profile?
Mark for Review
(1) Points It determines the amount of storage allocated to the volume based on the application using the volume. It specifies a set of QoS attributes used to optimize a logical volume for a specific application or task. (*) It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming volume to higher performance storage. It determines which Background Copy Priority will be used.
Correct
Correct
17. Which two (2) actions should be performed prior to a software update? (Select two) Mark for Review (1) Points (Choose all correct answers)
Quiesce all I/O activity. and unpack the compressed tar file containing the update software. (*) Run pdscompat to that the new software is compatible with theFS1's hardware matrix. Resolve any System Alerts. (*) Disable Call-Home.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(1) Points
18.
How much total cache is in a FS1-2 system?
Mark for Review
208 384 192 80 416 (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Review (1) Points
19.
Which task is the FS1 MaxMan GUI not able to perform? Mark for
Monitor LUN performance on all FS1 Flash Storage Systems View recent events on all FS1 Flash Storage Systems Configure a new LUN on a specific FS1 Flash Storage System (*)
Launch an ASSM GUI for all FS1 Flash Storage Systems
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 20. What are three (3) parameters that are configurable only when creating an Advanced Storage Profile? (Select 3) Mark for Review (1) Points (Choose all correct answers) Preferred Storage Classes Disk Protection (*) Redundancy Number of RAID groups (*) Strip size (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 4 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 21. When moving a FS1 42U rack front-first up a ramp, what is the maximum tilt angle? Mark for Review (1) Points 18 degrees 24 degrees (*) 12 degrees 6 degrees
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 22. When performing Guided Maintenance, which of the following statements is not a recommended precaution? Mark for Review (1) Points Do not exit Guided Maintenance without performing all the steps in the wizard. Always remove the selected FRU, even if only testing the replacement procedure. Never manually turn off power to a component. (*) Ignore System Alerts until after Guided Maintenance has been completed.
Correct
Correct
23. How do customers typically deal with their database and data warehouse growth? Mark for Review (1) Points Go to lunch Throw more hardware at the problem (*) Implement the most sophisticated and automated tools to reduce capacity and speed performance Create more VM's
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Review (1) Points
24.
What is the function of the Background Copy Priority? Mark for
It controls the impact on system performance when data is moved. (*) It controls from where and to where data is moved.
It initiates a full QoS migration when Disk Enclosures are added to a FS1 Flash Storage System. It temporarily changes the QoS Priority.
Correct
(RPO)? (1) Points
Correct 25. Which statement correctly describes Recovery Point Objective Mark for Review
Continuous data protection product offered by EMC which s data replication of block-based storage. Describes the acceptable amount of time to recover from downtime The period of time from which you can recover replicated data Describes the acceptable amount of data loss measured in time (*)
Correct Previous
Correct! Page 5 of 12
Next
Summary
26. What does SAN/NAS biasing control? (1) Points
Mark for Review
CIFS Connection Count F Framing Priority QoS Level NFS Access Frequency Cache Allocation (*)
Incorrect try again.
Sorry, that is not correct. Please review the course content and
27. "Single pane-of-glass management with MaxMan" addresses which customer challenge for legacy SAN? Mark for Review (1) Points Datacenter sprawl introduces complexity affecting manageability (*) Variability in response time threatens customer loyalty and employee productivity Separate database and storage processes Adhering to SLA's
Incorrect try again.
Sorry, that is not correct. Please review the course content and
28.
Which statement best describes the FS1?
Mark for Review
(1) Points Designed to address a dedicated single application workload to exploit the power of the SAN architecture! Improved HDD centric performance based on newer faster server technology! Maximizes the power of flash with the option of exploiting the economics of disk! (*) Maximizes the power of disk with the option of using flash!
Correct
Correct!
29. When performing Guided Maintenance, what does the Identify button do? Mark for Review (1) Points Forces LEDs of the faulty component to display red Displays in the Oracle FS1 System Manager the rack location of the faulty component
Blinks LEDs on all non-faulty components (*) Displays in the Oracle FS1 System Manager the serial number of the faulty component
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 30. each status LED? (1) Points
Which document should be consulted for a detailed description of Mark for Review
FS1 Flash Storage System and Interoperability Guide FS1 Flash Storage System Service Guide (*) FS1 Flash Storage System 's Guide FS1 Flash Storage System Advanced Hardware Installation Guide
Correct Previous
Correct Page 6 of 12
Next
Summary
31. Which two (2) tasks can an " 1" do that an " 2" cannot do? (Select two) Mark for Review (1) Points (Choose all correct answers) Modify NDMP settings (*) Create an iSCSI LUN Perform Guided Maintenance Shut down the FS1 (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
32. can be created? (1) Points
What are condition that must be met before a new Storage Domain Mark for Review
A Storage Domain license must be installed. There must be at least one Disk Enclosure that contains no volumes. (*) A Storage Profile must exist for setting the Storage Domain QoS parameters. You must be logged into the FS1 .
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
three) (1) Points
33. Which three (3) statements about a Copy LUN are true? (Select Mark for Review (Choose all correct answers)
It is readable and writable. (*) It requires cache equal to 5-10% of the size of the original LUN. Its creation is instantaneous. It consumes as much disk space as the original LUN. (*) Its initial QoS settings may be different than the original LUN. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 34. The disk sector size on the FS1 is 520 bytes vs. 512. Why? Pick the Best answer. A) Bigger is Better B) Allows for additional spare cells for eMLC Flash delivering better endurance C) Adds space for T10-PI checksum tagging D) Adds space for a SHA 256 fingerprint to facilitate future deduplication on a very granular basis Mark for Review (1) Points
D B C (*) A
Correct
Correct!
35. Mark for Review (1) Points
Which protocols are ed by a FS1-2 Flash Storage System?
Fibre Channel only iSCSI and Fibre Channel (*) CIFS, NFS, Fibre Channel, and iSCSI CIFS, NFS and Fibre Channel
Correct Previous
Correct Page 7 of 12
Next
Summary
36. Which two (2) statements concerning Storage Profiles are true? (Select 2) Mark for Review (1) Points (Choose all correct answers) System Storage Profiles cannot be modified, removed, or duplicated. Custom Storage Profiles can be deleted. (*) Additional Storage Profiles can be created. (*) An Advanced Storage Profile can be created only by a with the Primary role.
Correct
Correct
37. Which three (3) pieces of statistical data can be displayed in a LUN Trending chart? (Select 3) Mark for Review (1) Points (Choose all correct answers) IOPS/second per LUN (*) Volume Allocated Capacity (*) IOPS/second per Disk Cumulative Writes (MB) (*) Volume Logical Capacity
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(Select 2) (1) Points
38. Which two (2) statements concerning Storage Domains are true? Mark for Review (Choose all correct answers)
A Storage Domain may contain all storage classes. (*) A Storage Domain may contain only one QoS class A Storage Domain may contain only one storage class. A Storage Domain may contain all QoS classes. (*)
Correct
Correct
39. Mark for Review (1) Points
How do customers typically manage their aged SAN infrastructure?
Build their own Go with "sketchy" and expensive 3rd-party after EOSL (*) Add more lubricant Switch Ethernet
Incorrect try again.
three) (1) Points
Sorry, that is not correct. Please review the course content and
40. Which three (3) statements about a Clone LUN are true? (Select Mark for Review (Choose all correct answers)
It requires cache equal to 5-10% of the size of the original LUN It is manually created. (*) It has the same initial QoS settings as the original LUN. (*) Its creation is instantaneous. (*) It is read-only.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 8 of 12
Next
Summary
41. Which of the following methods is not a valid method of installing the Oracle FS1 System Manager software? Mark for Review (1) Points By ing a .rpm file and running a batch file or shell script (*) Via a .msi executable By ing a .zip file and running a batch file or shell script
By ing a .tar file and running a batch file or shell script
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 42.
Which statements about an update are true?
Mark for Review
(1) Points Can be scheduled, is disruptive, can be monitored Cannot be scheduled, is usually non-disruptive, cannot be monitored Cannot be scheduled, is usually non-disruptive, can be monitored Can be scheduled, is usually non-disruptive, can be monitored (*)
Correct
Correct!
43. be assigned to? (1) Points
When creating a LUN, what type(s) of organizational units can it Mark for Review
Volume Group only Volume Group, Clone LUN Group and Storage Domain Storage Domain only Volume Group and Storage Domain (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 44. Reporting Schedules are configured to run at regular intervals. Which of the following intervals is not a valid interval? Mark for Review (1) Points Monthly (*)
Run Once Weekly Daily
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 45. What is a benefit of using iSCSI SAN instead of Fibre Channel SAN? Mark for Review (1) Points Better performance Less host system resources are used Lower cost (*) Reduced istration
Correct
Correct
Previous
Page 9 of 12
Next
Summary
46. (1) Points
By what criteria can Event Log entries be filtered?
Mark for Review
Hardware component, event severity, and event time range Event type, event category, and event time range Event category, event severity, and event date range (*) Event type, event severity, and event date range
Correct
Schedule?
Correct 47. Which of the following items cannot be configured in a Reporting Mark for Review
(1) Points The frequency with which the report is run The time of day at which the report is run The format in which the report is generated (*) The report type
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 48. Select the correct advantage for the following architectural differentiator: Application Profiles Mark for Review (1) Points Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc (*) Multiple types of flash media options for different access patterns The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS
Correct
Storages? (1) Points
(*)
Correct! 49. How is FS1 MaxMan configured to monitor a particular set of FS1 Mark for Review
Define a list of FS1 Storage Systems and save it to a file on the local host.
Create a list of FS1 Flash Storage Systems under the Configuration tab and
save it in the Managed Hosts navigation folder. Browse for available FS1 Flash Storage Systems and add them to a list in the ASSM GUI. No configuration is necessary. All FS1 Flash Storage Systems are automatically displayed in MaxMan.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Domains? (1) Points
50. Which of the following uses is not a suggested use of Storage Mark for Review
Protocol (FC, iSCSI, NAS) separation Migrate data off legacy storage Segregate data based on operating system type (*) Application I/O isolation
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 10 of 12
Next
51. (1) Points
In what mode do the FS1 Pilot control units operate?
Dual active Active-Active Asynchronous Active-ive (*) Active-Active Synchronous
Correct
Correct
Summary Mark for Review
52. What are three (3) types of reports that can be scheduled to run regularly? (Select 3) Mark for Review (4) Points (Choose all correct answers) Storage Performance (*) iSCSI Hosts NAS Hosts SAN Hosts (*) System Configuration (*)
Incorrect try again.
Review (1) Points
Sorry, that is not correct. Please review the course content and
53.
Which action is performed by an Event Notification?
Mark for
Information is sent to a log file A Call-Home is initiated Email is sent to one or more s (*) Information is sent to a printer
Correct
string? (1) Points
Correct 54. How many Disk Enclosures may be attached to a SAS back end Mark for Review
20 or 30 6
5 (*) 4 8
Correct
Correct!
55. "Save on expensive contracts for aging SAN storage" addresses which customer challenge for legacy SAN? Mark for Review (1) Points (Choose all correct answers) Adhering to SLA's Aging hardware can be more expensive than buying new equipment because of maintenance costs (*) CAPEX reductions Availability of applications
Incorrect try again. Previous
Sorry, that is not correct. Please review the course content and
Page 11 of 12 56.
Next
Summary
What is the function of the PMI?
Mark for Review
(1) Points RAID controller failover path Write cache primary mirror path Management, configuration, and monitoring (*) FC data connection between Controllers and Disk Enclosures
Incorrect
Incorrect, refer to the "FS1 Flash Storage System istration
for 6.x" training for more information 57. Oracle now has a complete line of enterprise storage products, which of these provides an enterprise-grade SAN solution? Mark for Review (1) Points Engineered Systems StorageTek ZS3 FS1 (*)
Correct
Correct
58. From where is the Oracle FS1 System Manager software available for to the local host? Mark for Review (1) Points (Choose all correct answers) Via FTP from the FS1 Customer portal.
(*)
From a web browser, by specifying the name or IP address of the FS1 Storage.
From the MaxMan interface, by clicking the " ASSM GUI" link under the tab. From a web browser, under "Software", on the FS1 Customer portal. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 59. What is "staging" in the context of performing a software update on a FS1 Flash Storage System? Mark for Review (1) Points Loading the software package into the FS1 Flash Storage System and validating it (*)
Moving the software package from a temporary directory to its permanent directory Converting the ed software into the proper format for installing What is "staging" in the context of performing a software update on a FS1 Flash Storage System?
Correct
Correct
60. Comparing the backend bandwidth of the FS1 to the Axiom 600, how much faster is the FS1? Mark for Review (1) Points 15 9X (*) 3 4.5X 10X
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 12 of 12
Summary
Test: Oracle FS1 Flash Storage System Field Delivery Consultant � Online Assessment Review your answers, , and question scores below. An asterisk (*) indicates a correct answer. This 60 question assessment test is the final component of the FS1 Flash Storage Storage System Field Delivery Consultant GLP. This assessment will allow you to test your knowledge level of the information learned from the FS1 Flash Storage System product training. ing with >80% of this assessment makes you eligible to become an Oracle Field Delivery Consultant for this product family.
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 1. Which three (3) pieces of statistical data can be displayed in a LUN Trending chart? (Select 3) Mark for Review (1) Points (Choose all correct answers) Cumulative Writes (MB) (*) Volume Allocated Capacity (*) IOPS/second per Disk Volume Logical Capacity IOPS/second per LUN (*)
Correct
Correct
2. Which three (3) statements concerning a FS1 Flash Storage System reset are true? (Select three) Mark for Review (1) Points (Choose all correct answers) It requires a license key file provided by FS1 customer . (*) It can be undone only if no other operation is performed after the reset. It resets the system serial number. (*) It erases all data on the Disk Enclosures. (*) It can be performed only using the FS1 customer .
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
enclosure? (1) Points
3. Which type of media s up to 3 RAID Groups in a single disk Mark for Review
900 GB HDD's 300 GB HDD's 1.6 TB SSD's (*) 400 GB SSD's 4 TB HDD's
Incorrect try again.
string? (1) Points
Sorry, that is not correct. Please review the course content and
4. How many Disk Enclosures may be attached to a SAS back end Mark for Review
8 20 or 30 6 4 5 (*)
Correct
Correct!
5. What are three (3) parameters that are configurable when creating a Custom Storage Profile? (Select 3) Mark for Review (1) Points (Choose all correct answers) Read Ahead
Disk Protection I/O Bias (*) Priority Level (*) Typical Access (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Page 1 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 6. From which tab in the Oracle FS1 System Manager navigation pane can you view the current software version installed on system components? Mark for Review (1) Points Protect Configure Monitor (*)
Correct
Correct 7.
What is the function of the Background Copy Priority? Mark for
Review (1) Points It controls the impact on system performance when data is moved. (*) It temporarily changes the QoS Priority. It controls from where and to where data is moved.
It initiates a full QoS migration when Disk Enclosures are added to a FS1 Flash Storage System.
Correct
Correct
8. Why is the connection to the Oracle FS1 System Manager broken during a non-disruptive FS1 software update? Mark for Review (1) Points It is one of several Pilot processes that are restarted after the update is finished. The Pilot is restarted although the update may not be finished. (*) It is the only Pilot process restarted after the update is finished. The Pilot is restarted after the update is finished.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 9. What does it mean when a host is shown as "Hostname Unknown" in the "SAN -> Hosts" window of the Oracle FS1 System Manager? Mark for Review (1) Points It is referenced by the World Wide Number of its Host Bus Adapter. (*) It is not available for storage provisioning. It needs to be rebooted before the FS1 will its name. It has an HBA port conflict that needs to be resolved.
Correct
Correct
10. Which two (2) pieces of information are displayed in the Status Bar of the Oracle FS1 System Manager? (Select two) Mark for Review (1) Points (Choose all correct answers)
Number of s logged in (*) Storage utilization System status (*) Time Zone
Correct Previous
Correct Page 2 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 11. Select the correct advantage for the following architectural differentiator: Enterprise Grade Mark for Review (1) Points Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc Multiple types of flash media options for different access patterns Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS (*) The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments
Incorrect try again.
Sorry, that is not correct. Please review the course content and
12. What is the minimum number of people needed to safely when moving a loaded FS1-2 Racked-Mounted System? Mark for Review (1) Points
1 2 4 3 (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 13. When there are multiple Power Distribution Units (PDUs) in a rack, they must all be powered on within how many seconds? Mark for Review (1) Points 20 15 10 (*) 30
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
for Review (1) Points
14.
What are the severities by which events can be filtered?
Mark
Emergency; Critical, Warning, Informational Emergency, Warning, Informational Critical, Warning, Informational (*) Critical, Error, Warning, Informational
Incorrect
Incorrect, refer to the "FS1 Flash Storage System istration
for 6.x" training for more information 15.
By what criteria can Event Log entries be filtered?
Mark for
Review (1) Points Hardware component, event severity, and event time range Event category, event severity, and event date range (*) Event type, event severity, and event date range Event type, event category, and event time range
Correct Previous
Correct Page 3 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 16.
What is LUN mapping?
Mark for Review
(1) Points The asg of specific tracks of one or more disks to a LUN The asg of a LUN to a specific IP address The asg of a LUN to specific hosts (*) The asg of a LUN to one or more specific Controller FC ports
Correct
Correct 17.
What is the function of a Storage Profile?
Mark for Review
(1) Points It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming volume to higher performance storage. It determines the number of disk Enclosures that the volume will be striped across, and the stripe size.
It specifies a set of QoS attributes used to optimize a logical volume for a specific application or task. (*) It determines the amount of storage allocated to the volume, based on the application using the volume.
Correct
three) (1) Points
Correct 18. Which three (3) statements about a Copy LUN are true? (Select Mark for Review (Choose all correct answers)
Its creation is instantaneous. It consumes as much disk space as the original LUN. (*) It is readable and writable. (*) It requires cache equal to 5-10% of the size of the original LUN. Its initial QoS settings may be different than the original LUN. (*)
Correct
Correct
19. Select the profile attribute that does not fit for Double Down on the Database with FS1 Mark for Review (1) Points (Choose all correct answers) Oracle Database 11gR2 upgrades and/or moving to 12c E-Business Suite, JD Edwards, PeopleSoft, Essbase, OLAP, and Business Analytics customers (Mostly) NAS environments (*) Applications that require 1 second, or less, failover
Incorrect agony.
(Select 2) (1) Points
Sorry, that is not correct. You are sentenced to eternal pain and
20. Which two (2) statements concerning a Storage Profile are true? Mark for Review (Choose all correct answers)
A Storage Profile cannot be modified. (*) A Storage Profile is assigned to a specific Storage Domain. A System Storage Profiles can be deleted. A Storage Profile can be duplicated. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 4 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 21. The Oracle Flash Storage System is engineered for flash. Select the storage configurations options available for the FS1. Mark for Review (1) Points HDD Only Flash Only Flash/Tape/ or Both Flash/HDD/ or Both (*)
Correct
Correct!
22. Select the correct advantage for the following architectural differentiator: Storage Domains Mark for Review
(1) Points Multiple types of flash media options for different access patterns Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments (*) The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS
Correct
Correct! 23.
What is a Storage Domain?
Mark for Review
(1) Points A grouping of selected RAID groups allowing the configuration of virtual FS1 systems A logical entity by which LUNs and filesystems can be grouped and dedicated to a specific purpose A feature by which a specific class of storage can be dedicated to selected Controller A feature by which the Disks can be segmented to create discrete storage pools (*)
Correct
Correct 24.
for Review (1) Points 4 (*)
How many tiers of storage are available on the Oracle FS1-2 Mark
3 1 2
Correct
Correct
25. On a capacity basis, expressed as a percentage, how much more space is used by RAID 6 vs. RAID 5? Mark for Review (1) Points 0.12125 0.15 0.1 0 (*)
Incorrect try again. Previous
Sorry, that is not correct. Please review the course content and
Page 5 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 26. What are three (3) types of failure that the FS1 Path Manager protects against? (Select three) Mark for Review (1) Points (Choose all correct answers) FC cable failure (*) Disk Enclosure failure Controller failure (*) HBA failure (*)
Pilot failure
Correct
Correct
27. What are three (3) ways that a Call-Home procedure can be initiated? (Select three) Mark for Review (1) Points (Choose all correct answers) Scheduled on an hourly basis Scheduled on a daily basis (*) Via fs1cli_callhome By a system software update (*) Event triggered (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 28. How do customers typically deal with their database and data warehouse growth? Mark for Review (1) Points Create more VM's Throw more hardware at the problem (*) Implement the most sophisticated and automated tools to reduce capacity and speed performance Go to lunch
Correct
Correct
29. Which two (2) actions should be performed prior to a software update? (Select two) Mark for Review (1) Points
(Choose all correct answers) Quiesce all I/O activity. Disable Call-Home.
(*)
and unpack the compressed tar file containing the update software.
Resolve any System Alerts. (*) Run pdscompat to that the new software is compatible with theFS1's hardware matrix.
Correct
Correct
30. Which of the following methods is not a recommended method of sending a log bundle tar file to FS1's customer center? Mark for Review (1) Points Via FS1's customer portal Via the Call-Home server Via FS1's FTP site Via email to FS1's customer address (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 6 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) created? (1) Points 5
31. What is the maximum number of s that may be Mark for Review
23 (*) 17 10
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Storages? (1) Points
32. How is FS1 MaxMan configured to monitor a particular set of FS1 Mark for Review
Create a list of FS1 Flash Storage Systems under the Configuration tab and save it in the Managed Hosts navigation folder. Browse for available FS1 Flash Storage Systems and add them to a list in the ASSM GUI. No configuration is necessary. All FS1 Flash Storage Systems are automatically displayed in MaxMan. Define a list of FS1 Storage Systems and save it to a file on the local host. (*)
Correct
Correct
33. Select the correct advantage for the following architectural differentiator: Application Profiles Mark for Review (1) Points Multiple types of flash media options for different access patterns The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments Keep business up with features like: Sub-second failover, T10PI, WARMstart
error containment, No SPOF, pre-emptive copy and BCSS Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc (*)
Correct
Correct!
34. From where is the Oracle FS1 System Manager software available for to the local host? Mark for Review (1) Points (Choose all correct answers) From a web browser, under "Software", on the FS1 Customer portal. (*) From a web browser, by specifying the name or IP address of the FS1 Storage. (*) Via FTP from the FS1 Customer portal. From the MaxMan interface, by clicking the " ASSM GUI" link under the tab.
Correct
Log viewed? (1) Points
Correct 35. From which Oracle FS1 System Manager navigation tab is the Event Mark for Review
-> Event Log System -> Alerts and Events (*) System -> Configure -> System Logs
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 7 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 36.
For MaxRep, where does the Write Splitter reside?
Mark for
Review (1) Points On the MaxRep Engine On the host On FS1 (*) On VMAX
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 37. "Single pane-of-glass management with MaxMan" addresses which customer challenge for legacy SAN? Mark for Review (1) Points Adhering to SLA's Separate database and storage processes Datacenter sprawl introduces complexity affecting manageability (*) Variability in response time threatens customer loyalty and employee productivity
Correct
Correct!
38. Pick the best answer to the following question: What was the FS1 specifically architected to Mark for Review (1) Points Ease of Provisioning Exploit Flash performance (*)
T10-PI Integrity checking Autotiering Four tiers of storage
Incorrect try again.
Sorry, that is not correct. Please review the course content and
39.
What is the function of the PMI?
Mark for Review
(1) Points Management, configuration, and monitoring (*) FC data connection between Controllers and Disk Enclosures RAID controller failover path Write cache primary mirror path
Correct
Correct
40. Mark for Review (1) Points
How do customers typically manage their aged SAN infrastructure?
Go with "sketchy" and expensive 3rd-party after EOSL (*) Build their own Add more lubricant Switch Ethernet
Correct Previous
Correct! Page 8 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 41.
In what mode do the FS1 Pilot control units operate?
Mark for
Review (1) Points Active-Active Asynchronous Active-Active Synchronous Active-ive (*) Dual active
Correct
(1) Points
Correct 42.
How many internal tiers does the FS1 have?
Mark for Review
8 (*) Other Number 4 2 6
Incorrect try again.
Sorry, that is not correct. Please review the course content and
43. can be created? (1) Points
What are condition that must be met before a new Storage Domain Mark for Review
A Storage Domain license must be installed. You must be logged into the FS1 .
A Storage Profile must exist for setting the Storage Domain QoS parameters. There must be at least one Disk Enclosure that contains no volumes. (*)
Correct
Correct
44. Which customer requirement matches this business driver: "Management complexity/storage silos" Mark for Review (1) Points High-Speed Failover High performance, reliable data access, backup and recovery Better management tools; application consolidation (*) Fast storage performance for critical applications, database data and BIDW systems
Incorrect try again.
Sorry, that is not correct. Please review the course content and
45.
What is the primary function of the Pilot?
(1) Points RAID manager for the FS1 System manager for the FS1 (*) Cache manager for the FS1 CLI manager for the FS1
Correct Previous
Correct Page 9 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section)
Mark for Review
46. What are two (2) advantages of using FS1 Path Manager? (Select two) Mark for Review (1) Points (Choose all correct answers) Resides in the FS1 Automatic recognition and configuration of FC ports in a host (*) Provides a report on failed components Identifies and uses optimal paths (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(1) Points
47.
What is the function of a Storage Profile?
Mark for Review
It determines which Background Copy Priority will be used. It determines the amount of storage allocated to the volume based on the application using the volume. It specifies a set of QoS attributes used to optimize a logical volume for a specific application or task. (*) It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming volume to higher performance storage.
Correct
Correct
48. On the status bar of the Oracle FS1 System Manager, how is a "warning" condition indicated? Mark for Review (1) Points Red dot in the lower left corner of the window Faulty component is displayed in bold and will be flashing Amber triangle in the lower left corner of the window (*)
Flashing yellow dot in the lower left corner of the window
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 49. Reporting Schedules are configured to run at regular intervals. Which of the following intervals is not a valid interval? Mark for Review (1) Points Monthly (*) Run Once Weekly Daily
Correct
Correct
50. Storage Domain? (1) Points
How many tiers of storage can be configured concurrently within a Mark for Review
2 3 1 4 (*) None of these
Correct Previous
Correct! Page 10 of 12
Next
Summary
FS1 Flash Storage System istration (6.x)
(Answer all questions in this section) 51. Oracle now has a complete line of enterprise storage products, which of these provides an enterprise-grade SAN solution? Mark for Review (1) Points ZS3 StorageTek Engineered Systems FS1 (*)
Correct
Domains? (1) Points
Correct 52. Which of the following uses is not a suggested use of Storage Mark for Review
Segregate data based on operating system type (*) Protocol (FC, iSCSI, NAS) separation Migrate data off legacy storage Application I/O isolation
Correct
Correct
53. In the status bar, what does a yellow triangle icon containing an exclamation point indicate? Mark for Review (1) Points System utilization is nearing the upper threshold. There is a System Alert. (*) A component of the FS1 has generated an error but has not failed. A component of the FS1 Storage System is in a state of failure.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 54. What is "staging" in the context of performing a software update on a FS1 Flash Storage System? Mark for Review (1) Points Moving the software package from a temporary directory to its permanent directory Converting the ed software into the proper format for installing What is "staging" in the context of performing a software update on a FS1 Flash Storage System? Loading the software package into the FS1 Flash Storage System and validating it (*)
Correct
Correct
55. What three (3) types of information can be contained in a FS1 log bundle? (Select 3) Mark for Review (1) Points (Choose all correct answers) FS1 host topology information Volume Group configuration and performance information SAN host information (*) System configuration information (*) Performance and usage information (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 11 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 56. What must be done within the Oracle FS1 System Manager to configure an SNMP trap? Mark for Review (1) Points Create an Email Alert and select the SNMP category. Create a Reporting Schedule that enables SNMP traps. Create an Event Notification. Create an SNMP Host. (*)
Correct
(1) Points
Correct 57.
How is Guided Maintenance initiated?
Mark for Review
Via FS1's Customer Center Via the pdscli only Via the Oracle FS1 System Manager (*) Via the fscli only
Correct
Correct!
58. Which document should be consulted for detailed instructions for installing connecting brackets and plates? Mark for Review (1) Points FS1 Flash Storage System and Interoperability Guide FS1 Flash Storage System Advanced Hardware Installation Guide (*) FS1 Flash Storage System 's Guide
FS1 Flash Storage System Service Guide
Correct
(1) Points
Correct 59.
What does SAN/NAS biasing control?
Mark for Review
NFS Access Frequency F Framing Priority Cache Allocation (*) QoS Level CIFS Connection Count
Correct
Correct!
60. Mark for Review (1) Points
What are two (2) benefits of using Storage Domains? (Select 2)
(Choose all correct answers) Allows for easier customer charge-back capability. (*) Allows for global QoS settings on multiple LUNs. s stricter security requirements for sensitive data. Efficient migration of data to new Disk Enclosures. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 12 of 12
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 1.
What is LUN mapping?
Mark for Review
(1) Points The asg of specific tracks of one or more disks to a LUN The asg of a LUN to a specific IP address The asg of a LUN to one or more specific Controller FC ports The asg of a LUN to specific hosts (*)
Correct
Correct
2. How do customers typically deal with their database and data warehouse growth? Mark for Review (1) Points Implement the most sophisticated and automated tools to reduce capacity and speed performance Throw more hardware at the problem (*) Go to lunch Create more VM's
Correct
Correct
3. Which document should be consulted for detailed instructions for installing connecting brackets and plates? Mark for Review (1) Points FS1 Flash Storage System Advanced Hardware Installation Guide (*) FS1 Flash Storage System Service Guide FS1 Flash Storage System 's Guide
FS1 Flash Storage System and Interoperability Guide
Correct
Correct 4.
How many internal tiers does the FS1 have?
Mark for Review
(1) Points 4 2 6 8 (*) Other Number
Correct
for Review (1) Points
Correct! 5.
What steps are performed during a FS1 software update?
, , Stage, Install , Stage, Install (*) , Validate, , Install , Stage, , Install
Correct
Correct
Page 1 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section)
Mark
(1) Points
6.
What is the function of the PMI?
Mark for Review
Write cache primary mirror path Management, configuration, and monitoring (*) RAID controller failover path FC data connection between Controllers and Disk Enclosures
Correct
for Review (1) Points
Correct 7.
How many IP addresses are required to configure a Pilot?
Mark
4 1 3 (*) 2
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 8. When performing Guided Maintenance, what does the Identify button do? Mark for Review (1) Points Blinks LEDs on all non-faulty components (*) Forces LEDs of the faulty component to display red Displays in the Oracle FS1 System Manager the rack location of the faulty component Displays in the Oracle FS1 System Manager the serial number of the faulty component
Correct
Correct
9. Storage Domain? (1) Points
How many tiers of storage can be configured concurrently within a Mark for Review
None of these 2 4 (*) 3 1
Correct
Correct!
10. Which of the following methods is not a valid method of installing the Oracle FS1 System Manager software? Mark for Review (1) Points By ing a .rpm file and running a batch file or shell script (*) Via a .msi executable By ing a .zip file and running a batch file or shell script By ing a .tar file and running a batch file or shell script
Correct Previous
Correct Page 2 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 11. Which three (3) statements concerning a FS1 Flash Storage System reset are true? (Select three) Mark for Review (1) Points
(Choose all correct answers) It can be undone only if no other operation is performed after the reset. It requires a license key file provided by FS1 customer . (*) It resets the system serial number. (*) It erases all data on the Disk Enclosures. (*) It can be performed only using the FS1 customer .
Correct
Correct
12. What three (3) functions can be performed after connecting to the IP address or hostname of the FS1 via a web browser? (Select 3) Mark for Review (1) Points (Choose all correct answers) View FS1 documentation (*) Perform a warm restart of the FS1 the ASSM software (*) the FSCLI.exe (*) to the FS1 host
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(1) Points
13.
Which statements about an update are true?
Mark for Review
Can be scheduled, is disruptive, can be monitored Cannot be scheduled, is usually non-disruptive, cannot be monitored
Cannot be scheduled, is usually non-disruptive, can be monitored Can be scheduled, is usually non-disruptive, can be monitored (*)
Correct
Correct!
14. Mark for Review (1) Points
What are two (2) benefits of using Storage Domains? (Select 2)
(Choose all correct answers) Efficient migration of data to new Disk Enclosures. (*) Allows for easier customer charge-back capability. (*) s stricter security requirements for sensitive data. Allows for global QoS settings on multiple LUNs.
Correct
Correct
15. Mark for Review (1) Points
Application Profiles settings include which of the following?
(Choose all correct answers) Caching behavior and read-ahead (*) QoS Level (I/O Priority) (*) Access and IO Bias (*) RAID level/Thin Provisioning (*) Lots of throughput
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Previous
Page 3 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 16. What three (3) types of information can be contained in a FS1 log bundle? (Select 3) Mark for Review (1) Points (Choose all correct answers) Volume Group configuration and performance information Performance and usage information (*) FS1 host topology information SAN host information (*) System configuration information (*)
Correct
Correct
17. What is "staging" in the context of performing a software update on a FS1 Flash Storage System? Mark for Review (1) Points Loading the software package into the FS1 Flash Storage System and validating it (*) Converting the ed software into the proper format for installing What is "staging" in the context of performing a software update on a FS1 Flash Storage System? Moving the software package from a temporary directory to its permanent directory
Correct
Correct 18.
Which two (2) actions should be performed prior to a software
update? (Select two) (1) Points
Mark for Review
(Choose all correct answers)
(*)
and unpack the compressed tar file containing the update software.
Run pdscompat to that the new software is compatible with theFS1's hardware matrix. Quiesce all I/O activity. Disable Call-Home. Resolve any System Alerts. (*)
Correct
three) (1) Points
Correct 19. Which three (3) statements about a Copy LUN are true? (Select Mark for Review (Choose all correct answers)
It consumes as much disk space as the original LUN. (*) It is readable and writable. (*) Its creation is instantaneous. It requires cache equal to 5-10% of the size of the original LUN. Its initial QoS settings may be different than the original LUN. (*)
Correct
Correct 20.
What is the function of a Storage Profile?
Mark for Review
(1) Points It determines the amount of storage allocated to the volume, based on the application using the volume.
It determines the number of disk Enclosures that the volume will be striped across, and the stripe size. It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming volume to higher performance storage. It specifies a set of QoS attributes used to optimize a logical volume for a specific application or task. (*)
Correct Previous
Correct Page 4 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 21. What are three (3) ways that a Call-Home procedure can be initiated? (Select three) Mark for Review (1) Points (Choose all correct answers) By a system software update (*) Event triggered (*) Via fs1cli_callhome Scheduled on an hourly basis Scheduled on a daily basis (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 22. When there are multiple Power Distribution Units (PDUs) in a rack, they must all be powered on within how many seconds? Mark for Review (1) Points 20 30
10 (*) 15
Correct
System? (1) Points
Correct 23. Which statement is true concerning iSCSI on a FS1 Flash Storage Mark for Review
Requires a license Is ed by the FS1 Path Manager (*) Requires the use of iSNS for management purposes Is ed only on networks with throughput of 1 GB or higher
Correct
Correct
24. When iSCSI is utilized, which technology used to reduce overhead and improve performance on the host systems? Mark for Review (1) Points Auxiliary I/O cache Thin Provisioning iSCSI port load balancing T Offload Engine (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 25. Mark for Review (1) Points
Which protocols are ed by a FS1-2 Flash Storage System?
CIFS, NFS and Fibre Channel CIFS, NFS, Fibre Channel, and iSCSI iSCSI and Fibre Channel (*) Fibre Channel only
Correct Previous
Correct Page 5 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) Review (1) Points
26.
By what criteria can Event Log entries be filtered?
Mark for
Hardware component, event severity, and event time range Event type, event severity, and event date range Event category, event severity, and event date range (*) Event type, event category, and event time range
Correct
Correct
27. The performance of which two (2) items can be monitored within the Oracle FS1 System Manager? (Select 2) Mark for Review (1) Points (Choose all correct answers) Disk Enclosures Filesystems LUNs (*)
Volume groups SAN Protocols (*)
Incorrect try again.
Sorry, that is not correct. Please review the course content and
28. Select the correct advantage for the following architectural differentiator: Flash Optimized Mark for Review (1) Points (Choose all correct answers) Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS Multiple types of flash media options for different access patterns (*) The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance
Incorrect try again.
Sorry, that is not correct. Please review the course content and
29.
In what mode do the FS1 Pilot control units operate?
Review (1) Points Dual active Active-Active Synchronous Active-ive (*) Active-Active Asynchronous
Mark for
Correct
Correct
30. Reporting Schedules are configured to run at regular intervals. Which of the following intervals is not a valid interval? Mark for Review (1) Points Weekly Daily Monthly (*) Run Once
Correct Previous
Correct Page 6 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 31. Which two (2) pieces of information are displayed in the Status Bar of the Oracle FS1 System Manager? (Select two) Mark for Review (1) Points (Choose all correct answers) System status (*) Number of s logged in (*) Time Zone Storage utilization
Correct
Correct
32. power outage? (1) Points
What is the "Hold Up" time for the NVDRAM Write Cache after a Mark for Review
1 Month 2 weeks Infinite (*) 48 Hrs. 72 Hrs.
Correct
(Select 2) (1) Points
Correct! 33. Which two (2) statements concerning Storage Profiles are true? Mark for Review (Choose all correct answers)
Custom Storage Profiles can be deleted. (*) Additional Storage Profiles can be created. (*) An Advanced Storage Profile can be created only by a with the Primary role. System Storage Profiles cannot be modified, removed, or duplicated.
Correct
Correct 34.
for Review (1) Points 1 3 4 (*) 2
How many tiers of storage are available on the Oracle FS1-2 Mark
Correct
Correct
35. Pick the best answer to the following question: What was the FS1 specifically architected to Mark for Review (1) Points Exploit Flash performance (*) Four tiers of storage T10-PI Integrity checking Ease of Provisioning Autotiering
Correct Previous
Correct! Page 7 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 36. What are two (2) advantages of using FS1 Path Manager? (Select two) Mark for Review (1) Points (Choose all correct answers) Automatic recognition and configuration of FC ports in a host (*) Identifies and uses optimal paths (*) Resides in the FS1 Provides a report on failed components
Correct
?
Correct 37. How many active sessions can the Oracle FS1 System Manager Mark for Review
(1) Points unlimited 5 1 10 (*)
Correct
Correct 38.
What is a Copy LUN?
Mark for Review
(1) Points A block-level copy of a LUN which utilizes the same amount of disk space as the original LUN (*) A point-in-time copy of a LUN which utilizes less disk space than the original LUN A point-to-time copy of a LUN which utilizes the same amount of disk space as the original LUN A block-level copy of a LUN which utilizes less disk space than the original LUN
Correct
Correct
39. The disk sector size on the FS1 is 520 bytes vs. 512. Why? Pick the Best answer. A) Bigger is Better B) Allows for additional spare cells for eMLC Flash delivering better endurance C) Adds space for T10-PI checksum tagging D) Adds space for a SHA 256 fingerprint to facilitate future deduplication on a very granular basis Mark for Review (1) Points B C (*)
D A
Correct
string? (1) Points
Correct! 40. How many Disk Enclosures may be attached to a SAS back end Mark for Review
5 (*) 4 20 or 30 6 8
Correct Previous
Correct! Page 8 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) (Select 2) (1) Points
41. Which two (2) statements concerning Storage Domains are true? Mark for Review (Choose all correct answers)
A Storage Domain may contain only one storage class. A Storage Domain may contain all QoS classes. (*) A Storage Domain may contain only one QoS class A Storage Domain may contain all storage classes. (*)
Correct
Correct
42. When must a Performance Controller be configured. (Pick all that are true) a) > 20 Disk Enclosures b) Application is cache friendly c) Customer has budget to afford it d) Customer plans to a FS1-16 later Mark for Review (1) Points a & b a & c b & c a & d (*) b & d
Incorrect try again.
Sorry, that is not correct. Please review the course content and
43. What are three (3) types of failure that the FS1 Path Manager protects against? (Select three) Mark for Review (1) Points (Choose all correct answers) Disk Enclosure failure HBA failure (*) Pilot failure Controller failure (*) FC cable failure (*)
Correct
Correct
for Review (1) Points
44.
What are the severities by which events can be filtered?
Mark
Emergency, Warning, Informational Emergency; Critical, Warning, Informational Critical, Warning, Informational (*) Critical, Error, Warning, Informational
Correct
Correct
45. Mark for Review (1) Points
How do customers typically manage their aged SAN infrastructure?
Build their own Switch Ethernet Add more lubricant Go with "sketchy" and expensive 3rd-party after EOSL (*)
Correct Previous
Correct! Page 9 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 46. What two (2) functions can be performed after connecting to the IP address or hostname of the FS1 via a web browser? (Select 2) Mark for Review (1) Points (Choose all correct answers) Enter Guided Maintenance Determine the number of Disks
View FS1 Events and System Alerts (*) Determine the serial number and software version of the FS1 (*) Determine the type of Disks that are installed
Correct
Correct
47. The Oracle Flash Storage System is engineered for flash. Select the storage configurations options available for the FS1. Mark for Review (1) Points Flash/Tape/ or Both Flash Only Flash/HDD/ or Both (*) HDD Only
Correct
Domains? (1) Points
Correct! 48. Which of the following uses is not a suggested use of Storage Mark for Review
Segregate data based on operating system type (*) Migrate data off legacy storage Application I/O isolation Protocol (FC, iSCSI, NAS) separation
Correct
Correct
49. Mark for Review (1) Points
What should be done before an Event Notification is created?
Determine the security level of the notification. Enable email notifications on the network settings page. (*) Storage Domain configuration and performance information Enable email notifications within the event notification. that system logging is configured on the log host.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 50. When performing Guided Maintenance, which of the following statements is not a recommended precaution? Mark for Review (1) Points Ignore System Alerts until after Guided Maintenance has been completed. Always remove the selected FRU, even if only testing the replacement procedure. Do not exit Guided Maintenance without performing all the steps in the wizard. Never manually turn off power to a component. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 10 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 51.
Which action is performed by an Event Notification?
Review (1) Points Email is sent to one or more s (*)
Mark for
A Call-Home is initiated Information is sent to a log file Information is sent to a printer
Correct
Correct 52.
How is Guided Maintenance initiated?
Mark for Review
(1) Points Via the pdscli only Via the Oracle FS1 System Manager (*) Via FS1's Customer Center Via the fscli only
Correct
(Select 2) (1) Points
Correct! 53. Which two (2) statements concerning Storage Domains are true? Mark for Review (Choose all correct answers)
A LUN can be assigned to a Volume Group but not to a Storage Domain. A LUN can be assigned to a Storage Domain but not to a Volume Group. A Volume Group may not span Storage Domains. A LUN can be assigned to both a Volume Group and a Storage Domain. (*) A Volume Group may span Storage Domains. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
54. Select the correct advantage for the following architectural differentiator: Enterprise Grade Mark for Review (1) Points Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS (*) Multiple types of flash media options for different access patterns Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments
Correct
three) (1) Points
Correct! 55. What are three (3) features of the FS1 Path Manager? (Select Mark for Review (Choose all correct answers)
Failed component detection Automatic failback (*) Increased throughput Path failure detection (*) Load balancing (*)
Correct Previous
Correct! Page 11 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 56. Select the correct statement describing the Automated Data Optimization (ADO) feature of Advanced Compression Mark for Review (1) Points ADO is an included (no charge) feature of the Enterprise Edition of the Oracle Database ADO s all storage ADO enables HCC on 3rd party storage (*) Only Oracle Storage, with HCC , enables customers to realize the full value of ADO
Incorrect try again.
three) (1) Points
Sorry, that is not correct. Please review the course content and
57. Which three (3) statements about a Clone LUN are true? (Select Mark for Review (Choose all correct answers)
It is read-only. It has the same initial QoS settings as the original LUN. (*) It is manually created. (*) Its creation is instantaneous. (*) It requires cache equal to 5-10% of the size of the original LUN
Correct
Correct 58.
What is the function of the Background Copy Priority? Mark for
Review (1) Points It temporarily changes the QoS Priority.
It initiates a full QoS migration when Disk Enclosures are added to a FS1 Flash Storage System. It controls from where and to where data is moved. It controls the impact on system performance when data is moved. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(RPO)? (1) Points
59. Which statement correctly describes Recovery Point Objective Mark for Review
Describes the acceptable amount of time to recover from downtime Describes the acceptable amount of data loss measured in time (*) The period of time from which you can recover replicated data Continuous data protection product offered by EMC which s data replication of block-based storage.
Correct
? (1) Points
Correct! 60. What are three roles that may be assigned to a new Mark for Review
Security , Primary , 1, 2, Monitor (*) , Monitor, Advanced Security , Storage ,
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Previous
Page 12 of 12
Summary
11. Which statement is true in a "Standard" redundancy QoS configuration? for Review (1) Points The FS1 utilizes one mirrored copy of the data. Stores original data and multiple mirrored copies. Stores original data only. (*) The FS1 is able to survive the loss of one Disk Enclosure.
Mark
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 1.
What is a Storage Domain?
Mark for Review
(1) Points A feature by which a specific class of storage can be dedicated to selected Controller A feature by which the Disks can be segmented to create discrete storage pools (*) A logical entity by which LUNs and filesystems can be grouped and dedicated to a specific purpose A grouping of selected RAID groups allowing the configuration of virtual FS1 systems
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 2. From which tab in the Oracle FS1 System Manager navigation pane can you view the current software version installed on system components? Mark for Review (1) Points Configure Protect (*) Monitor
Correct
Correct
3. Which two (2) pieces of information are displayed in the Status Bar of the Oracle FS1 System Manager? (Select two) Mark for Review (1) Points (Choose all correct answers) System status (*) Number of s logged in (*) Storage utilization Time Zone
Correct
Correct
4. Which document should be consulted for detailed instructions for installing connecting brackets and plates? Mark for Review (1) Points FS1 Flash Storage System and Interoperability Guide FS1 Flash Storage System 's Guide FS1 Flash Storage System Service Guide FS1 Flash Storage System Advanced Hardware Installation Guide (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
for Review (1) Points 4 (*) 2 3
5.
How many tiers of storage are available on the Oracle FS1-2 Mark
1
Correct
Correct
Page 1 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 6. What must be done within the Oracle FS1 System Manager to configure an SNMP trap? Mark for Review (1) Points Create an SNMP Host. (*) Create an Event Notification. Create a Reporting Schedule that enables SNMP traps. Create an Email Alert and select the SNMP category.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(1) Points
7.
How is Guided Maintenance initiated?
Mark for Review
Via the fscli only Via the Oracle FS1 System Manager (*) Via FS1's Customer Center Via the pdscli only
Correct
Correct!
8. power outage? (1) Points
What is the "Hold Up" time for the NVDRAM Write Cache after a Mark for Review
1 Month Infinite (*) 72 Hrs. 2 weeks 48 Hrs.
Correct
Correct!
9. By default, how many consecutive failed attempts will result in a FS1 being locked? Mark for Review (1) Points 10 2 5 (*) 3
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 10. Mark for Review (1) Points
Which statement best describes the performance of MaxRep 3.0?
Provides a 1.5x throughput increase as compared to the prior generation of MaxRep Engines Equals the performance of the prior generation of MaxRep Engines Provides a 2x throughput increase as compared to the prior generation of MaxRep Engines (*)
Provides a 10x throughput increase as compared to the prior generation of MaxRep Engines
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 2 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) System? (1) Points
11. Which statement is true concerning iSCSI on a FS1 Flash Storage Mark for Review
Requires the use of iSNS for management purposes Is ed by the FS1 Path Manager (*) Is ed only on networks with throughput of 1 GB or higher Requires a license
Correct
Domains? (2) Points
Correct 12. What 2 reasons show why a customer would implement Storage Mark for Review (Choose all correct answers)
Meet regulatory mandates (*) Meet security objectives (*) Speed application deployment Enable WORM on an archive
Incorrect try again.
Sorry, that is not correct. Please review the course content and
13. Select the correct advantage for the following architectural differentiator: QoS PLUS - Business Driven Auto-tiering Mark for Review (1) Points Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance (*) Multiple types of flash media options for different access patterns
Correct
Correct!
14. Select the correct advantage for the following architectural differentiator: Storage Domains Mark for Review (1) Points Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments (*) Multiple types of flash media options for different access patterns Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS
Correct
Correct!
15. Mark for Review (1) Points
What should be done before an Event Notification is created?
Determine the security level of the notification. Enable email notifications within the event notification. Enable email notifications on the network settings page. (*) that system logging is configured on the log host. Storage Domain configuration and performance information
Correct Previous
Correct Page 3 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 16.
What is the function of a Storage Profile?
Mark for Review
(1) Points It determines the amount of storage allocated to the volume based on the application using the volume. It specifies a set of QoS attributes used to optimize a logical volume for a specific application or task. (*) It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming volume to higher performance storage. It determines which Background Copy Priority will be used.
Correct
Correct
17. Which two (2) actions should be performed prior to a software update? (Select two) Mark for Review (1) Points (Choose all correct answers)
Quiesce all I/O activity. and unpack the compressed tar file containing the update software. (*) Run pdscompat to that the new software is compatible with theFS1's hardware matrix. Resolve any System Alerts. (*) Disable Call-Home.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(1) Points
18.
How much total cache is in a FS1-2 system?
Mark for Review
208 384 192 80 416 (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Review (1) Points
19.
Which task is the FS1 MaxMan GUI not able to perform? Mark for
Monitor LUN performance on all FS1 Flash Storage Systems View recent events on all FS1 Flash Storage Systems Configure a new LUN on a specific FS1 Flash Storage System (*)
Launch an ASSM GUI for all FS1 Flash Storage Systems
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 20. What are three (3) parameters that are configurable only when creating an Advanced Storage Profile? (Select 3) Mark for Review (1) Points (Choose all correct answers) Preferred Storage Classes Disk Protection (*) Redundancy Number of RAID groups (*) Strip size (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 4 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 21. When moving a FS1 42U rack front-first up a ramp, what is the maximum tilt angle? Mark for Review (1) Points 18 degrees 24 degrees (*) 12 degrees 6 degrees
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 22. When performing Guided Maintenance, which of the following statements is not a recommended precaution? Mark for Review (1) Points Do not exit Guided Maintenance without performing all the steps in the wizard. Always remove the selected FRU, even if only testing the replacement procedure. Never manually turn off power to a component. (*) Ignore System Alerts until after Guided Maintenance has been completed.
Correct
Correct
23. How do customers typically deal with their database and data warehouse growth? Mark for Review (1) Points Go to lunch Throw more hardware at the problem (*) Implement the most sophisticated and automated tools to reduce capacity and speed performance Create more VM's
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Review (1) Points
24.
What is the function of the Background Copy Priority? Mark for
It controls the impact on system performance when data is moved. (*) It controls from where and to where data is moved.
It initiates a full QoS migration when Disk Enclosures are added to a FS1 Flash Storage System. It temporarily changes the QoS Priority.
Correct
(RPO)? (1) Points
Correct 25. Which statement correctly describes Recovery Point Objective Mark for Review
Continuous data protection product offered by EMC which s data replication of block-based storage. Describes the acceptable amount of time to recover from downtime The period of time from which you can recover replicated data Describes the acceptable amount of data loss measured in time (*)
Correct Previous
Correct! Page 5 of 12
Next
Summary
26. What does SAN/NAS biasing control? (1) Points
Mark for Review
CIFS Connection Count F Framing Priority QoS Level NFS Access Frequency Cache Allocation (*)
Incorrect try again.
Sorry, that is not correct. Please review the course content and
27. "Single pane-of-glass management with MaxMan" addresses which customer challenge for legacy SAN? Mark for Review (1) Points Datacenter sprawl introduces complexity affecting manageability (*) Variability in response time threatens customer loyalty and employee productivity Separate database and storage processes Adhering to SLA's
Incorrect try again.
Sorry, that is not correct. Please review the course content and
28.
Which statement best describes the FS1?
Mark for Review
(1) Points Designed to address a dedicated single application workload to exploit the power of the SAN architecture! Improved HDD centric performance based on newer faster server technology! Maximizes the power of flash with the option of exploiting the economics of disk! (*) Maximizes the power of disk with the option of using flash!
Correct
Correct!
29. When performing Guided Maintenance, what does the Identify button do? Mark for Review (1) Points Forces LEDs of the faulty component to display red Displays in the Oracle FS1 System Manager the rack location of the faulty component
Blinks LEDs on all non-faulty components (*) Displays in the Oracle FS1 System Manager the serial number of the faulty component
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 30. each status LED? (1) Points
Which document should be consulted for a detailed description of Mark for Review
FS1 Flash Storage System and Interoperability Guide FS1 Flash Storage System Service Guide (*) FS1 Flash Storage System 's Guide FS1 Flash Storage System Advanced Hardware Installation Guide
Correct Previous
Correct Page 6 of 12
Next
Summary
31. Which two (2) tasks can an " 1" do that an " 2" cannot do? (Select two) Mark for Review (1) Points (Choose all correct answers) Modify NDMP settings (*) Create an iSCSI LUN Perform Guided Maintenance Shut down the FS1 (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
32. can be created? (1) Points
What are condition that must be met before a new Storage Domain Mark for Review
A Storage Domain license must be installed. There must be at least one Disk Enclosure that contains no volumes. (*) A Storage Profile must exist for setting the Storage Domain QoS parameters. You must be logged into the FS1 .
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
three) (1) Points
33. Which three (3) statements about a Copy LUN are true? (Select Mark for Review (Choose all correct answers)
It is readable and writable. (*) It requires cache equal to 5-10% of the size of the original LUN. Its creation is instantaneous. It consumes as much disk space as the original LUN. (*) Its initial QoS settings may be different than the original LUN. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 34. The disk sector size on the FS1 is 520 bytes vs. 512. Why? Pick the Best answer. A) Bigger is Better B) Allows for additional spare cells for eMLC Flash delivering better endurance C) Adds space for T10-PI checksum tagging D) Adds space for a SHA 256 fingerprint to facilitate future deduplication on a very granular basis Mark for Review (1) Points
D B C (*) A
Correct
Correct!
35. Mark for Review (1) Points
Which protocols are ed by a FS1-2 Flash Storage System?
Fibre Channel only iSCSI and Fibre Channel (*) CIFS, NFS, Fibre Channel, and iSCSI CIFS, NFS and Fibre Channel
Correct Previous
Correct Page 7 of 12
Next
Summary
36. Which two (2) statements concerning Storage Profiles are true? (Select 2) Mark for Review (1) Points (Choose all correct answers) System Storage Profiles cannot be modified, removed, or duplicated. Custom Storage Profiles can be deleted. (*) Additional Storage Profiles can be created. (*) An Advanced Storage Profile can be created only by a with the Primary role.
Correct
Correct
37. Which three (3) pieces of statistical data can be displayed in a LUN Trending chart? (Select 3) Mark for Review (1) Points (Choose all correct answers) IOPS/second per LUN (*) Volume Allocated Capacity (*) IOPS/second per Disk Cumulative Writes (MB) (*) Volume Logical Capacity
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(Select 2) (1) Points
38. Which two (2) statements concerning Storage Domains are true? Mark for Review (Choose all correct answers)
A Storage Domain may contain all storage classes. (*) A Storage Domain may contain only one QoS class A Storage Domain may contain only one storage class. A Storage Domain may contain all QoS classes. (*)
Correct
Correct
39. Mark for Review (1) Points
How do customers typically manage their aged SAN infrastructure?
Build their own Go with "sketchy" and expensive 3rd-party after EOSL (*) Add more lubricant Switch Ethernet
Incorrect try again.
three) (1) Points
Sorry, that is not correct. Please review the course content and
40. Which three (3) statements about a Clone LUN are true? (Select Mark for Review (Choose all correct answers)
It requires cache equal to 5-10% of the size of the original LUN It is manually created. (*) It has the same initial QoS settings as the original LUN. (*) Its creation is instantaneous. (*) It is read-only.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 8 of 12
Next
Summary
41. Which of the following methods is not a valid method of installing the Oracle FS1 System Manager software? Mark for Review (1) Points By ing a .rpm file and running a batch file or shell script (*) Via a .msi executable By ing a .zip file and running a batch file or shell script
By ing a .tar file and running a batch file or shell script
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 42.
Which statements about an update are true?
Mark for Review
(1) Points Can be scheduled, is disruptive, can be monitored Cannot be scheduled, is usually non-disruptive, cannot be monitored Cannot be scheduled, is usually non-disruptive, can be monitored Can be scheduled, is usually non-disruptive, can be monitored (*)
Correct
Correct!
43. be assigned to? (1) Points
When creating a LUN, what type(s) of organizational units can it Mark for Review
Volume Group only Volume Group, Clone LUN Group and Storage Domain Storage Domain only Volume Group and Storage Domain (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 44. Reporting Schedules are configured to run at regular intervals. Which of the following intervals is not a valid interval? Mark for Review (1) Points Monthly (*)
Run Once Weekly Daily
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 45. What is a benefit of using iSCSI SAN instead of Fibre Channel SAN? Mark for Review (1) Points Better performance Less host system resources are used Lower cost (*) Reduced istration
Correct
Correct
Previous
Page 9 of 12
Next
Summary
46. (1) Points
By what criteria can Event Log entries be filtered?
Mark for Review
Hardware component, event severity, and event time range Event type, event category, and event time range Event category, event severity, and event date range (*) Event type, event severity, and event date range
Correct
Schedule?
Correct 47. Which of the following items cannot be configured in a Reporting Mark for Review
(1) Points The frequency with which the report is run The time of day at which the report is run The format in which the report is generated (*) The report type
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 48. Select the correct advantage for the following architectural differentiator: Application Profiles Mark for Review (1) Points Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc (*) Multiple types of flash media options for different access patterns The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS
Correct
Storages? (1) Points
(*)
Correct! 49. How is FS1 MaxMan configured to monitor a particular set of FS1 Mark for Review
Define a list of FS1 Storage Systems and save it to a file on the local host.
Create a list of FS1 Flash Storage Systems under the Configuration tab and
save it in the Managed Hosts navigation folder. Browse for available FS1 Flash Storage Systems and add them to a list in the ASSM GUI. No configuration is necessary. All FS1 Flash Storage Systems are automatically displayed in MaxMan.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Domains? (1) Points
50. Which of the following uses is not a suggested use of Storage Mark for Review
Protocol (FC, iSCSI, NAS) separation Migrate data off legacy storage Segregate data based on operating system type (*) Application I/O isolation
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 10 of 12
Next
51. (1) Points
In what mode do the FS1 Pilot control units operate?
Dual active Active-Active Asynchronous Active-ive (*) Active-Active Synchronous
Correct
Correct
Summary Mark for Review
52. What are three (3) types of reports that can be scheduled to run regularly? (Select 3) Mark for Review (4) Points (Choose all correct answers) Storage Performance (*) iSCSI Hosts NAS Hosts SAN Hosts (*) System Configuration (*)
Incorrect try again.
Review (1) Points
Sorry, that is not correct. Please review the course content and
53.
Which action is performed by an Event Notification?
Mark for
Information is sent to a log file A Call-Home is initiated Email is sent to one or more s (*) Information is sent to a printer
Correct
string? (1) Points
Correct 54. How many Disk Enclosures may be attached to a SAS back end Mark for Review
20 or 30 6
5 (*) 4 8
Correct
Correct!
55. "Save on expensive contracts for aging SAN storage" addresses which customer challenge for legacy SAN? Mark for Review (1) Points (Choose all correct answers) Adhering to SLA's Aging hardware can be more expensive than buying new equipment because of maintenance costs (*) CAPEX reductions Availability of applications
Incorrect try again. Previous
Sorry, that is not correct. Please review the course content and
Page 11 of 12 56.
Next
Summary
What is the function of the PMI?
Mark for Review
(1) Points RAID controller failover path Write cache primary mirror path Management, configuration, and monitoring (*) FC data connection between Controllers and Disk Enclosures
Incorrect
Incorrect, refer to the "FS1 Flash Storage System istration
for 6.x" training for more information 57. Oracle now has a complete line of enterprise storage products, which of these provides an enterprise-grade SAN solution? Mark for Review (1) Points Engineered Systems StorageTek ZS3 FS1 (*)
Correct
Correct
58. From where is the Oracle FS1 System Manager software available for to the local host? Mark for Review (1) Points (Choose all correct answers) Via FTP from the FS1 Customer portal.
(*)
From a web browser, by specifying the name or IP address of the FS1 Storage.
From the MaxMan interface, by clicking the " ASSM GUI" link under the tab. From a web browser, under "Software", on the FS1 Customer portal. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 59. What is "staging" in the context of performing a software update on a FS1 Flash Storage System? Mark for Review (1) Points Loading the software package into the FS1 Flash Storage System and validating it (*)
Moving the software package from a temporary directory to its permanent directory Converting the ed software into the proper format for installing What is "staging" in the context of performing a software update on a FS1 Flash Storage System?
Correct
Correct
60. Comparing the backend bandwidth of the FS1 to the Axiom 600, how much faster is the FS1? Mark for Review (1) Points 15 9X (*) 3 4.5X 10X
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 12 of 12
Summary
Test: Oracle FS1 Flash Storage System Field Delivery Consultant � Online Assessment Review your answers, , and question scores below. An asterisk (*) indicates a correct answer. This 60 question assessment test is the final component of the FS1 Flash Storage Storage System Field Delivery Consultant GLP. This assessment will allow you to test your knowledge level of the information learned from the FS1 Flash Storage System product training. ing with >80% of this assessment makes you eligible to become an Oracle Field Delivery Consultant for this product family.
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 1. Which three (3) pieces of statistical data can be displayed in a LUN Trending chart? (Select 3) Mark for Review (1) Points (Choose all correct answers) Cumulative Writes (MB) (*) Volume Allocated Capacity (*) IOPS/second per Disk Volume Logical Capacity IOPS/second per LUN (*)
Correct
Correct
2. Which three (3) statements concerning a FS1 Flash Storage System reset are true? (Select three) Mark for Review (1) Points (Choose all correct answers) It requires a license key file provided by FS1 customer . (*) It can be undone only if no other operation is performed after the reset. It resets the system serial number. (*) It erases all data on the Disk Enclosures. (*) It can be performed only using the FS1 customer .
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
enclosure? (1) Points
3. Which type of media s up to 3 RAID Groups in a single disk Mark for Review
900 GB HDD's 300 GB HDD's 1.6 TB SSD's (*) 400 GB SSD's 4 TB HDD's
Incorrect try again.
string? (1) Points
Sorry, that is not correct. Please review the course content and
4. How many Disk Enclosures may be attached to a SAS back end Mark for Review
8 20 or 30 6 4 5 (*)
Correct
Correct!
5. What are three (3) parameters that are configurable when creating a Custom Storage Profile? (Select 3) Mark for Review (1) Points (Choose all correct answers) Read Ahead
Disk Protection I/O Bias (*) Priority Level (*) Typical Access (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Page 1 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 6. From which tab in the Oracle FS1 System Manager navigation pane can you view the current software version installed on system components? Mark for Review (1) Points Protect Configure Monitor (*)
Correct
Correct 7.
What is the function of the Background Copy Priority? Mark for
Review (1) Points It controls the impact on system performance when data is moved. (*) It temporarily changes the QoS Priority. It controls from where and to where data is moved.
It initiates a full QoS migration when Disk Enclosures are added to a FS1 Flash Storage System.
Correct
Correct
8. Why is the connection to the Oracle FS1 System Manager broken during a non-disruptive FS1 software update? Mark for Review (1) Points It is one of several Pilot processes that are restarted after the update is finished. The Pilot is restarted although the update may not be finished. (*) It is the only Pilot process restarted after the update is finished. The Pilot is restarted after the update is finished.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 9. What does it mean when a host is shown as "Hostname Unknown" in the "SAN -> Hosts" window of the Oracle FS1 System Manager? Mark for Review (1) Points It is referenced by the World Wide Number of its Host Bus Adapter. (*) It is not available for storage provisioning. It needs to be rebooted before the FS1 will its name. It has an HBA port conflict that needs to be resolved.
Correct
Correct
10. Which two (2) pieces of information are displayed in the Status Bar of the Oracle FS1 System Manager? (Select two) Mark for Review (1) Points (Choose all correct answers)
Number of s logged in (*) Storage utilization System status (*) Time Zone
Correct Previous
Correct Page 2 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 11. Select the correct advantage for the following architectural differentiator: Enterprise Grade Mark for Review (1) Points Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc Multiple types of flash media options for different access patterns Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS (*) The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments
Incorrect try again.
Sorry, that is not correct. Please review the course content and
12. What is the minimum number of people needed to safely when moving a loaded FS1-2 Racked-Mounted System? Mark for Review (1) Points
1 2 4 3 (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 13. When there are multiple Power Distribution Units (PDUs) in a rack, they must all be powered on within how many seconds? Mark for Review (1) Points 20 15 10 (*) 30
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
for Review (1) Points
14.
What are the severities by which events can be filtered?
Mark
Emergency; Critical, Warning, Informational Emergency, Warning, Informational Critical, Warning, Informational (*) Critical, Error, Warning, Informational
Incorrect
Incorrect, refer to the "FS1 Flash Storage System istration
for 6.x" training for more information 15.
By what criteria can Event Log entries be filtered?
Mark for
Review (1) Points Hardware component, event severity, and event time range Event category, event severity, and event date range (*) Event type, event severity, and event date range Event type, event category, and event time range
Correct Previous
Correct Page 3 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 16.
What is LUN mapping?
Mark for Review
(1) Points The asg of specific tracks of one or more disks to a LUN The asg of a LUN to a specific IP address The asg of a LUN to specific hosts (*) The asg of a LUN to one or more specific Controller FC ports
Correct
Correct 17.
What is the function of a Storage Profile?
Mark for Review
(1) Points It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming volume to higher performance storage. It determines the number of disk Enclosures that the volume will be striped across, and the stripe size.
It specifies a set of QoS attributes used to optimize a logical volume for a specific application or task. (*) It determines the amount of storage allocated to the volume, based on the application using the volume.
Correct
three) (1) Points
Correct 18. Which three (3) statements about a Copy LUN are true? (Select Mark for Review (Choose all correct answers)
Its creation is instantaneous. It consumes as much disk space as the original LUN. (*) It is readable and writable. (*) It requires cache equal to 5-10% of the size of the original LUN. Its initial QoS settings may be different than the original LUN. (*)
Correct
Correct
19. Select the profile attribute that does not fit for Double Down on the Database with FS1 Mark for Review (1) Points (Choose all correct answers) Oracle Database 11gR2 upgrades and/or moving to 12c E-Business Suite, JD Edwards, PeopleSoft, Essbase, OLAP, and Business Analytics customers (Mostly) NAS environments (*) Applications that require 1 second, or less, failover
Incorrect agony.
(Select 2) (1) Points
Sorry, that is not correct. You are sentenced to eternal pain and
20. Which two (2) statements concerning a Storage Profile are true? Mark for Review (Choose all correct answers)
A Storage Profile cannot be modified. (*) A Storage Profile is assigned to a specific Storage Domain. A System Storage Profiles can be deleted. A Storage Profile can be duplicated. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 4 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 21. The Oracle Flash Storage System is engineered for flash. Select the storage configurations options available for the FS1. Mark for Review (1) Points HDD Only Flash Only Flash/Tape/ or Both Flash/HDD/ or Both (*)
Correct
Correct!
22. Select the correct advantage for the following architectural differentiator: Storage Domains Mark for Review
(1) Points Multiple types of flash media options for different access patterns Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments (*) The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS
Correct
Correct! 23.
What is a Storage Domain?
Mark for Review
(1) Points A grouping of selected RAID groups allowing the configuration of virtual FS1 systems A logical entity by which LUNs and filesystems can be grouped and dedicated to a specific purpose A feature by which a specific class of storage can be dedicated to selected Controller A feature by which the Disks can be segmented to create discrete storage pools (*)
Correct
Correct 24.
for Review (1) Points 4 (*)
How many tiers of storage are available on the Oracle FS1-2 Mark
3 1 2
Correct
Correct
25. On a capacity basis, expressed as a percentage, how much more space is used by RAID 6 vs. RAID 5? Mark for Review (1) Points 0.12125 0.15 0.1 0 (*)
Incorrect try again. Previous
Sorry, that is not correct. Please review the course content and
Page 5 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 26. What are three (3) types of failure that the FS1 Path Manager protects against? (Select three) Mark for Review (1) Points (Choose all correct answers) FC cable failure (*) Disk Enclosure failure Controller failure (*) HBA failure (*)
Pilot failure
Correct
Correct
27. What are three (3) ways that a Call-Home procedure can be initiated? (Select three) Mark for Review (1) Points (Choose all correct answers) Scheduled on an hourly basis Scheduled on a daily basis (*) Via fs1cli_callhome By a system software update (*) Event triggered (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 28. How do customers typically deal with their database and data warehouse growth? Mark for Review (1) Points Create more VM's Throw more hardware at the problem (*) Implement the most sophisticated and automated tools to reduce capacity and speed performance Go to lunch
Correct
Correct
29. Which two (2) actions should be performed prior to a software update? (Select two) Mark for Review (1) Points
(Choose all correct answers) Quiesce all I/O activity. Disable Call-Home.
(*)
and unpack the compressed tar file containing the update software.
Resolve any System Alerts. (*) Run pdscompat to that the new software is compatible with theFS1's hardware matrix.
Correct
Correct
30. Which of the following methods is not a recommended method of sending a log bundle tar file to FS1's customer center? Mark for Review (1) Points Via FS1's customer portal Via the Call-Home server Via FS1's FTP site Via email to FS1's customer address (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 6 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) created? (1) Points 5
31. What is the maximum number of s that may be Mark for Review
23 (*) 17 10
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Storages? (1) Points
32. How is FS1 MaxMan configured to monitor a particular set of FS1 Mark for Review
Create a list of FS1 Flash Storage Systems under the Configuration tab and save it in the Managed Hosts navigation folder. Browse for available FS1 Flash Storage Systems and add them to a list in the ASSM GUI. No configuration is necessary. All FS1 Flash Storage Systems are automatically displayed in MaxMan. Define a list of FS1 Storage Systems and save it to a file on the local host. (*)
Correct
Correct
33. Select the correct advantage for the following architectural differentiator: Application Profiles Mark for Review (1) Points Multiple types of flash media options for different access patterns The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments Keep business up with features like: Sub-second failover, T10PI, WARMstart
error containment, No SPOF, pre-emptive copy and BCSS Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc (*)
Correct
Correct!
34. From where is the Oracle FS1 System Manager software available for to the local host? Mark for Review (1) Points (Choose all correct answers) From a web browser, under "Software", on the FS1 Customer portal. (*) From a web browser, by specifying the name or IP address of the FS1 Storage. (*) Via FTP from the FS1 Customer portal. From the MaxMan interface, by clicking the " ASSM GUI" link under the tab.
Correct
Log viewed? (1) Points
Correct 35. From which Oracle FS1 System Manager navigation tab is the Event Mark for Review
-> Event Log System -> Alerts and Events (*) System -> Configure -> System Logs
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 7 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 36.
For MaxRep, where does the Write Splitter reside?
Mark for
Review (1) Points On the MaxRep Engine On the host On FS1 (*) On VMAX
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 37. "Single pane-of-glass management with MaxMan" addresses which customer challenge for legacy SAN? Mark for Review (1) Points Adhering to SLA's Separate database and storage processes Datacenter sprawl introduces complexity affecting manageability (*) Variability in response time threatens customer loyalty and employee productivity
Correct
Correct!
38. Pick the best answer to the following question: What was the FS1 specifically architected to Mark for Review (1) Points Ease of Provisioning Exploit Flash performance (*)
T10-PI Integrity checking Autotiering Four tiers of storage
Incorrect try again.
Sorry, that is not correct. Please review the course content and
39.
What is the function of the PMI?
Mark for Review
(1) Points Management, configuration, and monitoring (*) FC data connection between Controllers and Disk Enclosures RAID controller failover path Write cache primary mirror path
Correct
Correct
40. Mark for Review (1) Points
How do customers typically manage their aged SAN infrastructure?
Go with "sketchy" and expensive 3rd-party after EOSL (*) Build their own Add more lubricant Switch Ethernet
Correct Previous
Correct! Page 8 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 41.
In what mode do the FS1 Pilot control units operate?
Mark for
Review (1) Points Active-Active Asynchronous Active-Active Synchronous Active-ive (*) Dual active
Correct
(1) Points
Correct 42.
How many internal tiers does the FS1 have?
Mark for Review
8 (*) Other Number 4 2 6
Incorrect try again.
Sorry, that is not correct. Please review the course content and
43. can be created? (1) Points
What are condition that must be met before a new Storage Domain Mark for Review
A Storage Domain license must be installed. You must be logged into the FS1 .
A Storage Profile must exist for setting the Storage Domain QoS parameters. There must be at least one Disk Enclosure that contains no volumes. (*)
Correct
Correct
44. Which customer requirement matches this business driver: "Management complexity/storage silos" Mark for Review (1) Points High-Speed Failover High performance, reliable data access, backup and recovery Better management tools; application consolidation (*) Fast storage performance for critical applications, database data and BIDW systems
Incorrect try again.
Sorry, that is not correct. Please review the course content and
45.
What is the primary function of the Pilot?
(1) Points RAID manager for the FS1 System manager for the FS1 (*) Cache manager for the FS1 CLI manager for the FS1
Correct Previous
Correct Page 9 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section)
Mark for Review
46. What are two (2) advantages of using FS1 Path Manager? (Select two) Mark for Review (1) Points (Choose all correct answers) Resides in the FS1 Automatic recognition and configuration of FC ports in a host (*) Provides a report on failed components Identifies and uses optimal paths (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(1) Points
47.
What is the function of a Storage Profile?
Mark for Review
It determines which Background Copy Priority will be used. It determines the amount of storage allocated to the volume based on the application using the volume. It specifies a set of QoS attributes used to optimize a logical volume for a specific application or task. (*) It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming volume to higher performance storage.
Correct
Correct
48. On the status bar of the Oracle FS1 System Manager, how is a "warning" condition indicated? Mark for Review (1) Points Red dot in the lower left corner of the window Faulty component is displayed in bold and will be flashing Amber triangle in the lower left corner of the window (*)
Flashing yellow dot in the lower left corner of the window
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 49. Reporting Schedules are configured to run at regular intervals. Which of the following intervals is not a valid interval? Mark for Review (1) Points Monthly (*) Run Once Weekly Daily
Correct
Correct
50. Storage Domain? (1) Points
How many tiers of storage can be configured concurrently within a Mark for Review
2 3 1 4 (*) None of these
Correct Previous
Correct! Page 10 of 12
Next
Summary
FS1 Flash Storage System istration (6.x)
(Answer all questions in this section) 51. Oracle now has a complete line of enterprise storage products, which of these provides an enterprise-grade SAN solution? Mark for Review (1) Points ZS3 StorageTek Engineered Systems FS1 (*)
Correct
Domains? (1) Points
Correct 52. Which of the following uses is not a suggested use of Storage Mark for Review
Segregate data based on operating system type (*) Protocol (FC, iSCSI, NAS) separation Migrate data off legacy storage Application I/O isolation
Correct
Correct
53. In the status bar, what does a yellow triangle icon containing an exclamation point indicate? Mark for Review (1) Points System utilization is nearing the upper threshold. There is a System Alert. (*) A component of the FS1 has generated an error but has not failed. A component of the FS1 Storage System is in a state of failure.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 54. What is "staging" in the context of performing a software update on a FS1 Flash Storage System? Mark for Review (1) Points Moving the software package from a temporary directory to its permanent directory Converting the ed software into the proper format for installing What is "staging" in the context of performing a software update on a FS1 Flash Storage System? Loading the software package into the FS1 Flash Storage System and validating it (*)
Correct
Correct
55. What three (3) types of information can be contained in a FS1 log bundle? (Select 3) Mark for Review (1) Points (Choose all correct answers) FS1 host topology information Volume Group configuration and performance information SAN host information (*) System configuration information (*) Performance and usage information (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 11 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 56. What must be done within the Oracle FS1 System Manager to configure an SNMP trap? Mark for Review (1) Points Create an Email Alert and select the SNMP category. Create a Reporting Schedule that enables SNMP traps. Create an Event Notification. Create an SNMP Host. (*)
Correct
(1) Points
Correct 57.
How is Guided Maintenance initiated?
Mark for Review
Via FS1's Customer Center Via the pdscli only Via the Oracle FS1 System Manager (*) Via the fscli only
Correct
Correct!
58. Which document should be consulted for detailed instructions for installing connecting brackets and plates? Mark for Review (1) Points FS1 Flash Storage System and Interoperability Guide FS1 Flash Storage System Advanced Hardware Installation Guide (*) FS1 Flash Storage System 's Guide
FS1 Flash Storage System Service Guide
Correct
(1) Points
Correct 59.
What does SAN/NAS biasing control?
Mark for Review
NFS Access Frequency F Framing Priority Cache Allocation (*) QoS Level CIFS Connection Count
Correct
Correct!
60. Mark for Review (1) Points
What are two (2) benefits of using Storage Domains? (Select 2)
(Choose all correct answers) Allows for easier customer charge-back capability. (*) Allows for global QoS settings on multiple LUNs. s stricter security requirements for sensitive data. Efficient migration of data to new Disk Enclosures. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 12 of 12
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 1.
What is LUN mapping?
Mark for Review
(1) Points The asg of specific tracks of one or more disks to a LUN The asg of a LUN to a specific IP address The asg of a LUN to one or more specific Controller FC ports The asg of a LUN to specific hosts (*)
Correct
Correct
2. How do customers typically deal with their database and data warehouse growth? Mark for Review (1) Points Implement the most sophisticated and automated tools to reduce capacity and speed performance Throw more hardware at the problem (*) Go to lunch Create more VM's
Correct
Correct
3. Which document should be consulted for detailed instructions for installing connecting brackets and plates? Mark for Review (1) Points FS1 Flash Storage System Advanced Hardware Installation Guide (*) FS1 Flash Storage System Service Guide FS1 Flash Storage System 's Guide
FS1 Flash Storage System and Interoperability Guide
Correct
Correct 4.
How many internal tiers does the FS1 have?
Mark for Review
(1) Points 4 2 6 8 (*) Other Number
Correct
for Review (1) Points
Correct! 5.
What steps are performed during a FS1 software update?
, , Stage, Install , Stage, Install (*) , Validate, , Install , Stage, , Install
Correct
Correct
Page 1 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section)
Mark
(1) Points
6.
What is the function of the PMI?
Mark for Review
Write cache primary mirror path Management, configuration, and monitoring (*) RAID controller failover path FC data connection between Controllers and Disk Enclosures
Correct
for Review (1) Points
Correct 7.
How many IP addresses are required to configure a Pilot?
Mark
4 1 3 (*) 2
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 8. When performing Guided Maintenance, what does the Identify button do? Mark for Review (1) Points Blinks LEDs on all non-faulty components (*) Forces LEDs of the faulty component to display red Displays in the Oracle FS1 System Manager the rack location of the faulty component Displays in the Oracle FS1 System Manager the serial number of the faulty component
Correct
Correct
9. Storage Domain? (1) Points
How many tiers of storage can be configured concurrently within a Mark for Review
None of these 2 4 (*) 3 1
Correct
Correct!
10. Which of the following methods is not a valid method of installing the Oracle FS1 System Manager software? Mark for Review (1) Points By ing a .rpm file and running a batch file or shell script (*) Via a .msi executable By ing a .zip file and running a batch file or shell script By ing a .tar file and running a batch file or shell script
Correct Previous
Correct Page 2 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 11. Which three (3) statements concerning a FS1 Flash Storage System reset are true? (Select three) Mark for Review (1) Points
(Choose all correct answers) It can be undone only if no other operation is performed after the reset. It requires a license key file provided by FS1 customer . (*) It resets the system serial number. (*) It erases all data on the Disk Enclosures. (*) It can be performed only using the FS1 customer .
Correct
Correct
12. What three (3) functions can be performed after connecting to the IP address or hostname of the FS1 via a web browser? (Select 3) Mark for Review (1) Points (Choose all correct answers) View FS1 documentation (*) Perform a warm restart of the FS1 the ASSM software (*) the FSCLI.exe (*) to the FS1 host
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(1) Points
13.
Which statements about an update are true?
Mark for Review
Can be scheduled, is disruptive, can be monitored Cannot be scheduled, is usually non-disruptive, cannot be monitored
Cannot be scheduled, is usually non-disruptive, can be monitored Can be scheduled, is usually non-disruptive, can be monitored (*)
Correct
Correct!
14. Mark for Review (1) Points
What are two (2) benefits of using Storage Domains? (Select 2)
(Choose all correct answers) Efficient migration of data to new Disk Enclosures. (*) Allows for easier customer charge-back capability. (*) s stricter security requirements for sensitive data. Allows for global QoS settings on multiple LUNs.
Correct
Correct
15. Mark for Review (1) Points
Application Profiles settings include which of the following?
(Choose all correct answers) Caching behavior and read-ahead (*) QoS Level (I/O Priority) (*) Access and IO Bias (*) RAID level/Thin Provisioning (*) Lots of throughput
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Previous
Page 3 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 16. What three (3) types of information can be contained in a FS1 log bundle? (Select 3) Mark for Review (1) Points (Choose all correct answers) Volume Group configuration and performance information Performance and usage information (*) FS1 host topology information SAN host information (*) System configuration information (*)
Correct
Correct
17. What is "staging" in the context of performing a software update on a FS1 Flash Storage System? Mark for Review (1) Points Loading the software package into the FS1 Flash Storage System and validating it (*) Converting the ed software into the proper format for installing What is "staging" in the context of performing a software update on a FS1 Flash Storage System? Moving the software package from a temporary directory to its permanent directory
Correct
Correct 18.
Which two (2) actions should be performed prior to a software
update? (Select two) (1) Points
Mark for Review
(Choose all correct answers)
(*)
and unpack the compressed tar file containing the update software.
Run pdscompat to that the new software is compatible with theFS1's hardware matrix. Quiesce all I/O activity. Disable Call-Home. Resolve any System Alerts. (*)
Correct
three) (1) Points
Correct 19. Which three (3) statements about a Copy LUN are true? (Select Mark for Review (Choose all correct answers)
It consumes as much disk space as the original LUN. (*) It is readable and writable. (*) Its creation is instantaneous. It requires cache equal to 5-10% of the size of the original LUN. Its initial QoS settings may be different than the original LUN. (*)
Correct
Correct 20.
What is the function of a Storage Profile?
Mark for Review
(1) Points It determines the amount of storage allocated to the volume, based on the application using the volume.
It determines the number of disk Enclosures that the volume will be striped across, and the stripe size. It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming volume to higher performance storage. It specifies a set of QoS attributes used to optimize a logical volume for a specific application or task. (*)
Correct Previous
Correct Page 4 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 21. What are three (3) ways that a Call-Home procedure can be initiated? (Select three) Mark for Review (1) Points (Choose all correct answers) By a system software update (*) Event triggered (*) Via fs1cli_callhome Scheduled on an hourly basis Scheduled on a daily basis (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 22. When there are multiple Power Distribution Units (PDUs) in a rack, they must all be powered on within how many seconds? Mark for Review (1) Points 20 30
10 (*) 15
Correct
System? (1) Points
Correct 23. Which statement is true concerning iSCSI on a FS1 Flash Storage Mark for Review
Requires a license Is ed by the FS1 Path Manager (*) Requires the use of iSNS for management purposes Is ed only on networks with throughput of 1 GB or higher
Correct
Correct
24. When iSCSI is utilized, which technology used to reduce overhead and improve performance on the host systems? Mark for Review (1) Points Auxiliary I/O cache Thin Provisioning iSCSI port load balancing T Offload Engine (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 25. Mark for Review (1) Points
Which protocols are ed by a FS1-2 Flash Storage System?
CIFS, NFS and Fibre Channel CIFS, NFS, Fibre Channel, and iSCSI iSCSI and Fibre Channel (*) Fibre Channel only
Correct Previous
Correct Page 5 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) Review (1) Points
26.
By what criteria can Event Log entries be filtered?
Mark for
Hardware component, event severity, and event time range Event type, event severity, and event date range Event category, event severity, and event date range (*) Event type, event category, and event time range
Correct
Correct
27. The performance of which two (2) items can be monitored within the Oracle FS1 System Manager? (Select 2) Mark for Review (1) Points (Choose all correct answers) Disk Enclosures Filesystems LUNs (*)
Volume groups SAN Protocols (*)
Incorrect try again.
Sorry, that is not correct. Please review the course content and
28. Select the correct advantage for the following architectural differentiator: Flash Optimized Mark for Review (1) Points (Choose all correct answers) Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS Multiple types of flash media options for different access patterns (*) The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance
Incorrect try again.
Sorry, that is not correct. Please review the course content and
29.
In what mode do the FS1 Pilot control units operate?
Review (1) Points Dual active Active-Active Synchronous Active-ive (*) Active-Active Asynchronous
Mark for
Correct
Correct
30. Reporting Schedules are configured to run at regular intervals. Which of the following intervals is not a valid interval? Mark for Review (1) Points Weekly Daily Monthly (*) Run Once
Correct Previous
Correct Page 6 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 31. Which two (2) pieces of information are displayed in the Status Bar of the Oracle FS1 System Manager? (Select two) Mark for Review (1) Points (Choose all correct answers) System status (*) Number of s logged in (*) Time Zone Storage utilization
Correct
Correct
32. power outage? (1) Points
What is the "Hold Up" time for the NVDRAM Write Cache after a Mark for Review
1 Month 2 weeks Infinite (*) 48 Hrs. 72 Hrs.
Correct
(Select 2) (1) Points
Correct! 33. Which two (2) statements concerning Storage Profiles are true? Mark for Review (Choose all correct answers)
Custom Storage Profiles can be deleted. (*) Additional Storage Profiles can be created. (*) An Advanced Storage Profile can be created only by a with the Primary role. System Storage Profiles cannot be modified, removed, or duplicated.
Correct
Correct 34.
for Review (1) Points 1 3 4 (*) 2
How many tiers of storage are available on the Oracle FS1-2 Mark
Correct
Correct
35. Pick the best answer to the following question: What was the FS1 specifically architected to Mark for Review (1) Points Exploit Flash performance (*) Four tiers of storage T10-PI Integrity checking Ease of Provisioning Autotiering
Correct Previous
Correct! Page 7 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 36. What are two (2) advantages of using FS1 Path Manager? (Select two) Mark for Review (1) Points (Choose all correct answers) Automatic recognition and configuration of FC ports in a host (*) Identifies and uses optimal paths (*) Resides in the FS1 Provides a report on failed components
Correct
?
Correct 37. How many active sessions can the Oracle FS1 System Manager Mark for Review
(1) Points unlimited 5 1 10 (*)
Correct
Correct 38.
What is a Copy LUN?
Mark for Review
(1) Points A block-level copy of a LUN which utilizes the same amount of disk space as the original LUN (*) A point-in-time copy of a LUN which utilizes less disk space than the original LUN A point-to-time copy of a LUN which utilizes the same amount of disk space as the original LUN A block-level copy of a LUN which utilizes less disk space than the original LUN
Correct
Correct
39. The disk sector size on the FS1 is 520 bytes vs. 512. Why? Pick the Best answer. A) Bigger is Better B) Allows for additional spare cells for eMLC Flash delivering better endurance C) Adds space for T10-PI checksum tagging D) Adds space for a SHA 256 fingerprint to facilitate future deduplication on a very granular basis Mark for Review (1) Points B C (*)
D A
Correct
string? (1) Points
Correct! 40. How many Disk Enclosures may be attached to a SAS back end Mark for Review
5 (*) 4 20 or 30 6 8
Correct Previous
Correct! Page 8 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) (Select 2) (1) Points
41. Which two (2) statements concerning Storage Domains are true? Mark for Review (Choose all correct answers)
A Storage Domain may contain only one storage class. A Storage Domain may contain all QoS classes. (*) A Storage Domain may contain only one QoS class A Storage Domain may contain all storage classes. (*)
Correct
Correct
42. When must a Performance Controller be configured. (Pick all that are true) a) > 20 Disk Enclosures b) Application is cache friendly c) Customer has budget to afford it d) Customer plans to a FS1-16 later Mark for Review (1) Points a & b a & c b & c a & d (*) b & d
Incorrect try again.
Sorry, that is not correct. Please review the course content and
43. What are three (3) types of failure that the FS1 Path Manager protects against? (Select three) Mark for Review (1) Points (Choose all correct answers) Disk Enclosure failure HBA failure (*) Pilot failure Controller failure (*) FC cable failure (*)
Correct
Correct
for Review (1) Points
44.
What are the severities by which events can be filtered?
Mark
Emergency, Warning, Informational Emergency; Critical, Warning, Informational Critical, Warning, Informational (*) Critical, Error, Warning, Informational
Correct
Correct
45. Mark for Review (1) Points
How do customers typically manage their aged SAN infrastructure?
Build their own Switch Ethernet Add more lubricant Go with "sketchy" and expensive 3rd-party after EOSL (*)
Correct Previous
Correct! Page 9 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 46. What two (2) functions can be performed after connecting to the IP address or hostname of the FS1 via a web browser? (Select 2) Mark for Review (1) Points (Choose all correct answers) Enter Guided Maintenance Determine the number of Disks
View FS1 Events and System Alerts (*) Determine the serial number and software version of the FS1 (*) Determine the type of Disks that are installed
Correct
Correct
47. The Oracle Flash Storage System is engineered for flash. Select the storage configurations options available for the FS1. Mark for Review (1) Points Flash/Tape/ or Both Flash Only Flash/HDD/ or Both (*) HDD Only
Correct
Domains? (1) Points
Correct! 48. Which of the following uses is not a suggested use of Storage Mark for Review
Segregate data based on operating system type (*) Migrate data off legacy storage Application I/O isolation Protocol (FC, iSCSI, NAS) separation
Correct
Correct
49. Mark for Review (1) Points
What should be done before an Event Notification is created?
Determine the security level of the notification. Enable email notifications on the network settings page. (*) Storage Domain configuration and performance information Enable email notifications within the event notification. that system logging is configured on the log host.
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information 50. When performing Guided Maintenance, which of the following statements is not a recommended precaution? Mark for Review (1) Points Ignore System Alerts until after Guided Maintenance has been completed. Always remove the selected FRU, even if only testing the replacement procedure. Do not exit Guided Maintenance without performing all the steps in the wizard. Never manually turn off power to a component. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information Previous
Page 10 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 51.
Which action is performed by an Event Notification?
Review (1) Points Email is sent to one or more s (*)
Mark for
A Call-Home is initiated Information is sent to a log file Information is sent to a printer
Correct
Correct 52.
How is Guided Maintenance initiated?
Mark for Review
(1) Points Via the pdscli only Via the Oracle FS1 System Manager (*) Via FS1's Customer Center Via the fscli only
Correct
(Select 2) (1) Points
Correct! 53. Which two (2) statements concerning Storage Domains are true? Mark for Review (Choose all correct answers)
A LUN can be assigned to a Volume Group but not to a Storage Domain. A LUN can be assigned to a Storage Domain but not to a Volume Group. A Volume Group may not span Storage Domains. A LUN can be assigned to both a Volume Group and a Storage Domain. (*) A Volume Group may span Storage Domains. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
54. Select the correct advantage for the following architectural differentiator: Enterprise Grade Mark for Review (1) Points Keep business up with features like: Sub-second failover, T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS (*) Multiple types of flash media options for different access patterns Automated and optimized provisioning & QoS PLUS settings with just one click for OLTP, DW, ERP, CRM, etc The first flash storage system that automatically addresses application workload skew (access to blocks in a LUN is skewed to just a few blocks): busiest blocks on fastest tier of storage based on usage and business importance Can be used to isolate multiple database files, logs, and/or data to optimize performance and Secure multi-tenancy deployments
Correct
three) (1) Points
Correct! 55. What are three (3) features of the FS1 Path Manager? (Select Mark for Review (Choose all correct answers)
Failed component detection Automatic failback (*) Increased throughput Path failure detection (*) Load balancing (*)
Correct Previous
Correct! Page 11 of 12
Next
Summary
FS1 Flash Storage System istration (6.x) (Answer all questions in this section) 56. Select the correct statement describing the Automated Data Optimization (ADO) feature of Advanced Compression Mark for Review (1) Points ADO is an included (no charge) feature of the Enterprise Edition of the Oracle Database ADO s all storage ADO enables HCC on 3rd party storage (*) Only Oracle Storage, with HCC , enables customers to realize the full value of ADO
Incorrect try again.
three) (1) Points
Sorry, that is not correct. Please review the course content and
57. Which three (3) statements about a Clone LUN are true? (Select Mark for Review (Choose all correct answers)
It is read-only. It has the same initial QoS settings as the original LUN. (*) It is manually created. (*) Its creation is instantaneous. (*) It requires cache equal to 5-10% of the size of the original LUN
Correct
Correct 58.
What is the function of the Background Copy Priority? Mark for
Review (1) Points It temporarily changes the QoS Priority.
It initiates a full QoS migration when Disk Enclosures are added to a FS1 Flash Storage System. It controls from where and to where data is moved. It controls the impact on system performance when data is moved. (*)
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
(RPO)? (1) Points
59. Which statement correctly describes Recovery Point Objective Mark for Review
Describes the acceptable amount of time to recover from downtime Describes the acceptable amount of data loss measured in time (*) The period of time from which you can recover replicated data Continuous data protection product offered by EMC which s data replication of block-based storage.
Correct
? (1) Points
Correct! 60. What are three roles that may be assigned to a new Mark for Review
Security , Primary , 1, 2, Monitor (*) , Monitor, Advanced Security , Storage ,
Incorrect Incorrect, refer to the "FS1 Flash Storage System istration for 6.x" training for more information
Previous
Page 12 of 12
Summary
11. Which statement is true in a "Standard" redundancy QoS configuration? for Review (1) Points The FS1 utilizes one mirrored copy of the data. Stores original data and multiple mirrored copies. Stores original data only. (*) The FS1 is able to survive the loss of one Disk Enclosure.
Mark
Related Documents 3m3m1z
Fs1-2 Flash Storage System Help Desk Consultant Certification 3d5s1
December 2019 83
Manual Help Desk 1 2f3s67
December 2019 38
Cuestionario Help Desk 294l2k
February 2021 0
Siebel Help Desk 3l4h5i
December 2019 39
Help Desk Presentation.ppt 1r214g
December 2019 33
E-care Help Desk System Java Project 4s2h6h
October 2019 69More Documents from "Suhaimi Mie" 2c66c
Fs1-2 Flash Storage System Help Desk Consultant Certification 3d5s1
December 2019 83
Centos _ Redhat_ Install Kvm Virtualization Software.pdf 25261a
November 2019 33
Merck Manual Of Diagnosis And Therapy.pdf 154ni
November 2019 47
Cityofpg Commprofile Web 6r3ad
November 2022 0
Business Plan 31734n
January 2022 0