Gsm To Pstn Converter d958

GSM TO PSTN Converter G200PT

Description G200PT gives you both a reduced phone bill and a convenient phone conversation. It can replace the CALL FORWARDING SERVICE of PSTN to reduce the cost of PSTN-to-Mobile call with Mobile-to-Mobile call.

Feature —

Conversion of wire & wireless communication

—

Auto-select economic route (LCR)

—

With LCD display for easy programming

—

Code Conversion Setting: Through the connection towards local PSTN line, the phone calls will proceed with code-transfer dialing process

—

Volume modulating setting (1 - 5)

—

Polarity reversing function and 12 KHz built in

—

Definition of DTMF reversing signal

—

Limit of communicating time

—

GSM function of dialing out the prompt voice

—

When not connecting to Telephone Office line, GSM will provide the forced dial-out function

—

Set up GSM extra dialing local code

—

Set up extra dialing local-code to PSTN

—

GSM isn't ready, call will be forced to dial out from PSTN

—

Setting of Dialing type Call-Transfer: PSTN TO GSM, GSM TO PSTN, GSM callTransfer setting time to PSTN out, DTMF definition of reversed signal

GSM Frequency bands: Dual Band EGSM 900 and DCS 1800 MHz GSM 850/900/1800/1900 MHz (optional) —

Specific Call Transfer setting: GSM to PSTN: Assign mode (one stage dialing) Free mode (two stage dialing) PSTN to GSM: An Incoming call will be transferred to specify GSM Number

—

Call Transfer Restriction Setting (10 sets)

—

Short Code Setting (100 sets)

GSM TO PSTN Converter G200PT —

GSM Prefix No Setting (30 sets)

—

Call ID Dual Mode (FSK + DTMF)

—

Siemens TC-35 GSM Module

—

SIM Card Pin code disable/enable

Application 1. To be a PABX Extension: For example: When you set “PSTN TRANSFER TO” GSM number: 138xxxxxxxx, If someone is calling the phone which connected with converter from PSTN line, the call will be transferred to GSM mobile phone. Suppose that the GSM mobile phone is rejected receiving the call, then the call will be returned to the telephone

2. To be Least Cost Router: For example: If you choose “PSTN/GSM” mode and set “Set GSM Dial code” prefix number is 9, it means when dialing 9xxxxxxxx, calls will be sent out from GSM line. Dialing other prefix number will be sent out from PSTN line

GSM TO PSTN Converter G200PT 3. To be a Mobile Call Transfer Box: For example: 1. When you set “PSTN TRANSFER TO” GSM number: 138xxxxxxxx, If someone is calling the phone which connected with converter from PSTN line, the call will be transferred to GSM mobile phone. Suppose that the GSM mobile phone is rejected receiving the call, then the call will be returned to the telephone. 2. When you set “GSM to PSTN” and select “Enable Assign” mode. If someone calls SIM card number of the converter, the converter will transfer the call to an appointed PSTN number. 3. When you set “GSM to PSTN” and select “Enable Free” mode. If someone calls SIM card number of the converter, the converter will give a “Beep” sound to prompt caller and let caller to call the destination PSTN number

Specifications Air Interface Standard GSM900M/1800M phase 2+ Frequency Ranges Transmit Receive • GSM900M 890-915 MHz 935-960 MHz • GSM1800M 1710-1785 MHz 1805-1880 MHz Channel Space: 200khz Environment • Operating temperature range: -10°C to + 50°C • Storage temperature range: -40°C to + 60°C • Humidity: 5% to 95% (non-condensing) LED Indicators: Power and network status

Connectors • Two RJ-11 interface jacks for telephone, • SMA connector for antenna • DC power input jack Antenna • 2.5dB (Omni directional) with 3m wire • Optional higher gain antennas AC-to-DC Switching Power Supply • Input Voltage: 110 - 230 VAC • Frequency: 50/60 Hz • Output Voltage: 7.5VDC

GSM TO PSTN Converter G200PT

Eltech Communications Co., Ltd. Buji Town, Shenzhen, China Tel: +86-755-89971281 Fax: +86-755-84723552 www.eltechcom.com Sale email: [email protected] Copyright © 2007 Eltech Communications Co., Ltd. All rights reserved. Specifications and pictures are subject to change without prior notice.