Informatica Power Center Best Practices 6w504i

Informatica PowerCenter Development Best Practices

TABLE OF CONTENTS

Abstract................................................................................................................................3 Content overview.................................................................................................................3 1. Lookup - Performance considerations.............................................................................3 1.1. Unwanted columns....................................................................................................3 1.2. Size of the source versus size of lookup...................................................................3 1.3. instead of Lookup............................................................................................4 1.4. Conditional call of lookup........................................................................................4 1.5. SQL query.................................................................................................................4 1.6. Increase cache...........................................................................................................4 1.7. Cachefile file-system................................................................................................4 1.8. Useful cache utilities.................................................................................................4 2. Workflow performance – basic considerations................................................................5 2.1. SQL tuning....................................................................................................................6 3. Pre/Post-Session command - Uses...................................................................................7 4. Sequence generator – design considerations....................................................................8 5. FTP Connection object – platform independence............................................................8

Abstract This article explains a few of the important development best practices, like lookups, workflow performance etc.

Content overview • • • • •

Lookup - Performance considerations Workflow performance – basic considerations Pre/Post-Session commands - Uses Sequence generator – design considerations FTP Connection object –platform independence

1. Lookup - Performance considerations What is a lookup transformation? It is just not another transformation that fetches you data to look up against source data. A Lookup is an important and useful transformation when used effectively. If used improperly, performance of your mapping will be severely impaired. Let us see the different scenarios where you can face problems with Lookup and also how to tackle them.

1.1. Unwanted columns By default, when you create a lookup on a table, PowerCenter gives you all the columns in the table. If not all the columns are required for the lookup condition or return, delete the unwanted columns from the transformations. By not removing the unwanted columns, the cache size will increase.

1.2. Size of the source versus size of lookup Let us say, you have 10 rows in the source and one of the columns has to be checked against a big table (1 million rows). Then PowerCenter builds the cache for the lookup table and then checks the 10 source rows against the cache. It takes more time to build the cache of 1 million rows than going to the database 10 times and lookup against the table directly. Use uncached lookup instead of building the static cache, as the number of source rows is quite less than that of the lookup.

1.3. instead of Lookup In the same context as above, if the Lookup transformation is after the source qualifier and there is no active transformation in-between, you can as well go for the SQL over ride of source qualifier and traditionally to the lookup table using database s, if both the tables are in the same database and schema.

1.4. Conditional call of lookup Instead of going for connected lookups with filters for a conditional lookup call, go for unconnected lookup. Is the single column return bothering for this? Go ahead and change the SQL override to concatenate the required columns into one big column. Break them at the calling side into individual columns again.

1.5. SQL query Find the execution plan of the Lookup SQL and see if you can add some indexes or hints to the query to make it fetch data faster. You may have to take the help of a database developer to accomplish this if you, yourself are not a SQLer.

1.6. Increase cache If none of the above options provide performance enhancements, then the problem may lie with the cache. The cache that you assigned for the lookup is not sufficient to hold the data or index of the lookup. Whatever data that doesn't fit into the cache is spilt into the cache files designated in $PMCacheDir. When the PowerCenter doesn't find the data you are looking for in the cache, it swaps the data from the file to the cache and keeps doing this until the data is found. This is quite expensive being that this type of operation is very I/O intense. To stop this issue from occurring, increase the size of the cache so the entire data set resides in memory. When increasing the cache you also have to be aware of the system constraints. If your cache size is greater than the resources available, the session will fail due to the lack of resources.

1.7. Cachefile file-system In many cases, if you have cache directory in a different file-system than that of the hosting server, the cache file piling up may take time and result in latency. So with the help of your system s try to look into this aspect as well.

1.8. Useful cache utilities

If the same lookup SQL is being used by another lookup, then shared cache or a reusable lookup should be used. Also, if you have a table where the data is not changed often, you can use the persist cache option to build the cache once and use it many times by consecutive flows.

2. Workflow performance – basic considerations Though performance tuning has been the most feared part of development, it is the easiest, if the intricacies are known. With the newer and newer versions of PowerCenter, there is added flexibility for the developer to build better performing workflows. The major blocks for performance are the design of the mapping, SQL tuning if databases are involved. Regarding the design of the mapping, I have few basic considerations to be made. Please note that these are not any rules-of-thumb, but will make you act sensibly in different scenarios.

1. I would always suggest you to think twice before using an Update Strategy, though it adds a certain level of flexibility in the mapping. If you have a straight-through mapping which takes data from source and directly inserts all the records into the target, you wouldn’t need an update strategy. 2. Use a pre-SQL delete statement if you wish to delete specific rows from target before loading into the target. Use truncate option in the session properties, if you wish to clean the table before loading. I would avoid a separate pipe-line in the mapping that runs before the load with update-strategy transformation. 3. You have 3 sources and 3 targets with one-on-one mapping. If the load is independent according to business requirement, I would create 3 different mappings and 3 different session instances and they all run in parallel in my workflow after my “Start” task. I’ve observed that the workflow runtime comes down between 30-60% of serial processing. 4. PowerCenter is built to work of high volumes of data. So let the server be completely busy. Induce parallelism as far as possible into the mapping/workflow. 5. If using a transformation like a er or Aggregator transformation, sort the data on the keys or group by columns prior to these transformations to decrease the processing time. 6. Filtering should be done at the database level instead within the mapping. The database engine is much more efficient in filtering than PowerCenter. The above examples are just some things to consider when tuning a mapping.

2.1. SQL tuning SQL queries/actions occur in PowerCenter in one of the below ways. • • • •

Relational Source Qualifier Lookup SQL Override Stored Procedures Relational Target

Using the execution plan to tune a query is the best way to gain an understanding of how the database will process the data. Some things to keep in mind when reading the execution plan include: "Full Table Scans are not evil", "Indexes are not always fast", and “Indexes can be slow too". Analyse the table data to see if picking up 20 records out of 20 million is best using index or using table scan. Fetching 10 records out of 15 using index is faster or using full table scan is easier. Many times the relational target indexes create performance problems when loading records into the relational target. If the indexes are needed for other purposes, it is suggested to drop the indexes at the time of loading and then rebuild them in postSQL. When dropping indexes on a target you should consider integrity constraints and the time it takes to rebuild the index on post load vs. actual load time.

3. Pre/Post-Session command - Uses •

It is a very good practice to email the success or failure status of a task, once it is done. In the same way, when a business requirement drives, make use of the Post Session Success and Failure email for proper communication.

•

The built-in feature offers more flexibility with Session Logs as attachments and also provides other run-time data like Workflow run instance ID, etc.

•

Any archiving activities around the source and target flat files can be easily managed within the session using the session properties for flat file command that is new in PowerCenter v8.6. For example, after writing the flat file target, you can setup a command to zip the file to save space.

•

If you have any editing of data in the target flat files which your mapping couldn’t accommodate, write a shell/batch command or script and call it in the Post-Session command task. I prefer taking trade-offs between PowerCenter capabilities and the OS capabilities in these scenarios.

4. Sequence generator – design considerations In most of the cases, I would advice you to avoid the use of sequence generator transformation, while populating an ID column in the relational target table. I suggest you rather create a sequence on the target database and enable the trigger on that table to fetch the value from the database sequence. There are many advantages to using a database sequence generator:

• • •

Fewer PowerCenter objects will be present in a mapping which reduces development time and also maintenance effort. ID generation is PowerCenter independent if a different application is used in future to populate the target. Migration between environments is simplified because there is no additional overhead of considering the persistent values of the sequence generator from the repository database.

In all of the above cases, a sequence created in the target database would make life lot easier for the table data maintenance and also for the PowerCenter development. In fact, databases will have specific mechanisms (focused) to deal with sequences and so you can implement manual Push-down optimization on your PowerCenter mapping design for yourself. DBAs will always complain about triggers on the databases, but I would still insist on using sequence-trigger combination for huge volumes of data as well.

5. FTP Connection object – platform independence If you have any files to be read as source from Windows server when your PowerCenter server is hosted on UNIX/LINUX, then make use of FTP s on the Windows server and use File Reader with FTP Connection object. This connection object can be added as any other connection string. This gives the flexibility of platform independence. This will further reduce the overhead of having SAMBA mounts on to the Informatica boxes.