Installation Instructions 3p2m35

AUTODATA INSTALLATION INSTRUCTIONS: ========================================================================= *IMPORTANT* BEFORE YOU BEGIN READ THIS NOTES: - Run as is very important where it says "(<<< this is important)"! - Every restart/reboot is MUST and IMPORTANT for Windows 7/8/8.1/10 but NOT for XP! - Control (UAC) must be disabled when running DSEO (dseo13b.exe)! - If you get error on Autodata starting like in picture included in this package, you'll need to change your Regional settings to English US! - If you get any kind of error trying to start Autodata, go to "RegSettings" folder and first run "DeleteRegSettings.reg" then "RegSettings_x86.reg" or "RegSettings_x64.reg" depending on your OS (32 or 64 bit)! - If you want to remove "Test Mode" label from screen you can do it either from DSEO (dseo13b.exe) or visit link below and do it by Microsoft official way: https://.microsoft.com/en-us/kb/2509241 ========================================================================= 1. Run "Install_x86" or "Install_x64" depending on your OS (32 or 64 bit) 2. Follow on console screen messages and wait for the installation to complete * Windows 7/8/8.1/10 s MUST do following "a-i" steps while XP s should skip to step 3 * a) Disable UAC b) Restart/Reboot your PC c) Disable Antivirus because the next step is false-positive (NOT virus) d) Run "dseo13b.exe" as (<<< this is important) - Enable Test Mode e) Restart/Reboot your PC (after restart/reboot "Test Mode" will be shown on screen) f) Disable Antivirus again g) Run "dseo13b.exe" as (<<< this is important) - Sign a System File It's best to find your own path but depending on your OS it should be: 32 bit = C:\Program Files\nodongle.biz\AuDaS0\AuDaS0.sys 64 bit = C:\Program Files (x86)\nodongle.biz\AuDaS0\AuDaS0.sys ...and wait for confirmation message h) Exit from DSEO (dseo13b.exe) i) Restart/Reboot your PC (those "a-i" steps are for g emulator, NOT needed for XP) 3) Open "Keygen" folder and Run "GetUid-x86" or "GetUid-x64" as (<<< this is important) depending on your OS (32 or 64 bit) 4) Now because you have your UID number you can run "keygen.cmd" and paste/enter it to generate "license.reg" registry file (it's important to NOT enter first 2 digits which are probably 64, enter ONLY last 8 digits) (in case your UID is 6400000000 you must restart/reboot your PC and go back to step 3 because that UID is NOT proper and valid) 5) Run new generated registry file named "license.reg" 6) Start Emulator as (<<< this is important) from Start menu or from installed directory which is probably something like C:\Program Files\nodongle.biz\AuDaS0 and there is a file named "ndStart.cmd" or "ndRestart.cmd" 7) Open "Autodata 3.45" from desktop shortcut or ofcourse C:\ADCDA2\ADBCD.exe (Any kind of errors related to NOT successfully ed .reg files? Just them manually from "RegSettings" folder as described at the beginning of this text (before all this steps)) 8) Enjoy!

Autodata Runtime Error 217 004bb10d error fix e0209 sentinel key not found 3.45 install Windows 10/7/8/XP Run command prompt as , type "cd c:\adcda2" without quotes and then type "regsvr32 ChilkatCrypt2.dll" ========================================================================= If you dont follow all steps it wont work! TechTools.ME ThumperDC