Installation Manual 6d2b32
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Installation Manual as PDF for free.
More details w3441
- Words: 1,307
- Pages: 8
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 1
3MTM FireDamTM Intumescent Coating WB 1000 Installation Manual
Thinner is Better
3 1
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 2
3MTM FireDamTM Intumescent Coating WB 1000 Index
1. Product Description
page 3
2. Instruction
page 3
3. Specifications
page 3
4. Precautions & Limitations
page 4
5. Packaging & Shelf Life
page 4
6. Preparatory Work
page 4
7. Masking
page 4
8. Primers
page 5
9. Application Rates
page 5
10. Coverage
page 6
11. Topcoats
page 7
12. Precautions & Safe Handling Information
page 7
13. Maintenance
page 7 2
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 3
3MTM FireDamTM Intumescent Coating WB 1000 1. Product Description 3MTM FireDamTM Intumescent Coating WB 1000 is a single component water-based thin film coating to fireproof interior structural steel.
2. Instruction 3MTM FireDamTM Intumescent Coating WB 1000 for steel should be installed by trained and certified 3M authorized applicators.
3. Specifications 3MTM FireDamTM Intumescent Coating WB 1000 is listed by independent test agencies such as ULC and UL and is tested to, and es the criteria of, Standard “Fire Tests of Building Construction and Materials, “CAN/ULC-S101-07 Edition (ANSI/UL 263 – 13TH Edition, ASTM E119-2000 Edition). Typically Specified Division Division 7 Section 07812 – Intumescent Fire Resistive Material Related Sections Section 05100 – Structural Steel Section 05120 – 05500 – Structural steel and metal fabrications with reference to primer receiving fire protection materials Section 07811 – Spray-Applied Fire Resistive Material Section 09900 – Painting Fire Test Designs 3MTM FireDamTM Intumescent Coating WB 1000 was tested by ULC/UL on a large scope of columns, beams, floor assemblies and ed. Refer to the ULC/UL Directory for the 3MTM FireDamTM Intumescent Coating WB 1000 designs or please 3M.
3
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 4
3MTM FireDamTM Intumescent Coating WB 1000 4. Precautions & Limitations 3MTM FireDamTM Intumescent Coating WB 1000 for steel must be stored indoor in dry conditions between 10˚C and 40˚C. Protect from frost and freezing, excessive heat and strong radiant sunlight. Not intended for exterior applications. Comply with manufacturing recommendations for temperature and humidity conditions before, during and after installation of fireproofing. Refer to section 9. Application Rates & Conditions
5. Packaging & Shelf Life Packaging: Volume 18.9 liter (5 gal.) / Weight per pail: 61.6 Lbs (27.8 Kg) Shelf Life 3MTM FireDamTM Intumescent Coating WB 1000 shelf life is 6 months in original unopened containers from date of packaging when stored above 10˚C (50˚F). Lot numbering: First digit = last digit of year Second to fourth digit = 3 digit day of the year (from 001 to 365/366) Fifth indicator = dash symbol (-) Sixth to eighth = batch # (may only be 1 or 2 digits long)
6. Preparatory Work 3MTM FireDamTM Intumescent Coating WB 1000 for steel should be installed with an Airless spray pump such as Spraytech EP2355 or Graco 1595 / Ultra Max 795 or brush. All surfaces receiving the 3MTM FireDamTM Intumescent Coating WB 1000 for steel should be thoroughly cleaned of oil, grease, dirt, loose paint, loose mill scale and any other matter that will impair bond. Existing Conditions: (1) existing conditions and substrates before starting work. Correct unsatisfactory conditions before proceeding. (2) Proceed with installation only after steel components are primed with compatible recommended primer. *Refer to section 8. Primers
7. Masking Provide masking and drop cloths to prevent contamination of adjacent surfaces by fireproofing material.
4
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 5
3MTM FireDamTM Intumescent Coating WB 1000 8. Primers General instructions for installing 3MTM FireDamTM Intumescent Coating WB 1000 for steel include confirmation of primer compatibility such as recommended Alkyd and Epoxy primers to receive 3MTM FireDamTM Intumescent Coating WB 1000. Note: Primers containing zinc metal are generally not recommended. Apply 3MTM FireDamTM Intumescent Coating WB 1000 only to primed surfaces. Site conditions and end-use may dictate specific primer specifications. Follow primer manufacturer’s instructions.
9. Application Rates Refer to the 3MTM FireDamTM Intumescent Coating WB 1000 fire test design information to determine the minimum dry film thickness required for the size and orientation of steel element to be protected and for the required fire resistance rating. 3MTM FireDamTM Intumescent Coating WB 1000 should be applied in sufficient wet film thicknesses to achieve the required fire resistive rating with as many es as necessary, to attain required (DFT) dry film thickness. 3M™ FireDam™ Intumescent Coating WB 1000 should not be applied when relative humidity exceeds 80% or the surface to be coated is less than 3˚C above the dewpoint. The product is recommended to be applied only when temperatures are above 10˚C or 50˚F. To ensure an even coating thickness, the desired thickness should be achieved by the application of successive coats of no more than 500 microns dft (760 microns wft) per coat. Apply in sufficient thickness to achieve rating to uniform density and texture. The completed dry film thickness should be checked to ensure the required thickness has been applied. When multiple coats of 3M™ FireDam™ Intumescent Coating WB 1000 are required to achieve the prescribed dry film thickness, adequate drying time between the coats should be allowed. At 20˚C the minimum overcoating time is typically 4-6 hours. (The time will vary depending upon the prevailing temperature, relative humidity, air movement and thickness of material applied).
5
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 6
3MTM FireDamTM Intumescent Coating WB 1000 10. Coverage Chart based on laboratory results of 3MTM FireDamTM Intumescent Coating WB 1000.
Imperial Area (sq. feet) 100 200 300 400 500 600 700 800 900 1000
Volume / Pail (gal) 5 5 5 5 5 5 5 5 5 5
Volume % 66 66 66 66 66 66 66 66 66 66
WFT (mil) 80.21 40.10 26.74 20.05 16.04 13.37 11.46 10.03 8.91 8.02
DFT (mil) 52.94 26.47 17.65 13.23 10.59 8.82 7.56 6.62 5.88 5.29
WFT (mm) 1.89 0.95 0.63 0.47 0.38 0.32 0.27 0.24 0.21 0.19
DFT (mm) 1.25 0.62 0.42 0.31 0.25 0.21 0.18 0.16 0.14 0.12
Metric Area (sq. meter) 10 20 30 40 50 60 70 80 90 100
Volume / Pail (L) 18.93 18.93 18.93 18.93 18.93 18.93 18.93 18.93 18.93 18.93
Volume % 66 66 66 66 66 66 66 66 66 66
6
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 7
3MTM FireDamTM Intumescent Coating WB 1000 11. Topcoats A compatible topcoat with 3MTM FireDamTM Intumescent Coating WB 1000 is recommended for all installations, in order to give the desired colour. All topcoats should be applied in accordance with the topcoat manufacturer’s recommendations. Either acrylic or silicone alkyd paint to match surroundings are recommended. Ensure the 3MTM FireDamTM Intumescent Coating WB 1000 is thoroughly dry before application of topcoat.
12. Precautions & Safe Handling Information Follow approved working practices. Wear government approved respirators and proper clothing, reading all warning labels, and follow instruction on the MSDS.
13. Maintenance No maintenance is required when installed in accordance with the 3M installation manual. Once installed, if any section of the 3MTM FireDamTM Intumescent Coating WB 1000 is damaged, the damaged section should be repaired (touched up) by a 3M trained and certified applicator.
7
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
3M Fire Protection Products 3M Canada Inc. London, Ontario, Canada 800 265 1840 www.3m.ca/ic
MANUAL:Layout 1
9/30/08
2:32 PM
Page 8
3M and FireDam are trademarks of 3M. Used under licence in Canada. © 2008, 3M All rights reserved. Printed in Canada 1009-03119E 8
MANUAL:Layout 1
9/30/08
2:32 PM
Page 1
3MTM FireDamTM Intumescent Coating WB 1000 Installation Manual
Thinner is Better
3 1
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 2
3MTM FireDamTM Intumescent Coating WB 1000 Index
1. Product Description
page 3
2. Instruction
page 3
3. Specifications
page 3
4. Precautions & Limitations
page 4
5. Packaging & Shelf Life
page 4
6. Preparatory Work
page 4
7. Masking
page 4
8. Primers
page 5
9. Application Rates
page 5
10. Coverage
page 6
11. Topcoats
page 7
12. Precautions & Safe Handling Information
page 7
13. Maintenance
page 7 2
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 3
3MTM FireDamTM Intumescent Coating WB 1000 1. Product Description 3MTM FireDamTM Intumescent Coating WB 1000 is a single component water-based thin film coating to fireproof interior structural steel.
2. Instruction 3MTM FireDamTM Intumescent Coating WB 1000 for steel should be installed by trained and certified 3M authorized applicators.
3. Specifications 3MTM FireDamTM Intumescent Coating WB 1000 is listed by independent test agencies such as ULC and UL and is tested to, and es the criteria of, Standard “Fire Tests of Building Construction and Materials, “CAN/ULC-S101-07 Edition (ANSI/UL 263 – 13TH Edition, ASTM E119-2000 Edition). Typically Specified Division Division 7 Section 07812 – Intumescent Fire Resistive Material Related Sections Section 05100 – Structural Steel Section 05120 – 05500 – Structural steel and metal fabrications with reference to primer receiving fire protection materials Section 07811 – Spray-Applied Fire Resistive Material Section 09900 – Painting Fire Test Designs 3MTM FireDamTM Intumescent Coating WB 1000 was tested by ULC/UL on a large scope of columns, beams, floor assemblies and ed. Refer to the ULC/UL Directory for the 3MTM FireDamTM Intumescent Coating WB 1000 designs or please 3M.
3
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 4
3MTM FireDamTM Intumescent Coating WB 1000 4. Precautions & Limitations 3MTM FireDamTM Intumescent Coating WB 1000 for steel must be stored indoor in dry conditions between 10˚C and 40˚C. Protect from frost and freezing, excessive heat and strong radiant sunlight. Not intended for exterior applications. Comply with manufacturing recommendations for temperature and humidity conditions before, during and after installation of fireproofing. Refer to section 9. Application Rates & Conditions
5. Packaging & Shelf Life Packaging: Volume 18.9 liter (5 gal.) / Weight per pail: 61.6 Lbs (27.8 Kg) Shelf Life 3MTM FireDamTM Intumescent Coating WB 1000 shelf life is 6 months in original unopened containers from date of packaging when stored above 10˚C (50˚F). Lot numbering: First digit = last digit of year Second to fourth digit = 3 digit day of the year (from 001 to 365/366) Fifth indicator = dash symbol (-) Sixth to eighth = batch # (may only be 1 or 2 digits long)
6. Preparatory Work 3MTM FireDamTM Intumescent Coating WB 1000 for steel should be installed with an Airless spray pump such as Spraytech EP2355 or Graco 1595 / Ultra Max 795 or brush. All surfaces receiving the 3MTM FireDamTM Intumescent Coating WB 1000 for steel should be thoroughly cleaned of oil, grease, dirt, loose paint, loose mill scale and any other matter that will impair bond. Existing Conditions: (1) existing conditions and substrates before starting work. Correct unsatisfactory conditions before proceeding. (2) Proceed with installation only after steel components are primed with compatible recommended primer. *Refer to section 8. Primers
7. Masking Provide masking and drop cloths to prevent contamination of adjacent surfaces by fireproofing material.
4
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 5
3MTM FireDamTM Intumescent Coating WB 1000 8. Primers General instructions for installing 3MTM FireDamTM Intumescent Coating WB 1000 for steel include confirmation of primer compatibility such as recommended Alkyd and Epoxy primers to receive 3MTM FireDamTM Intumescent Coating WB 1000. Note: Primers containing zinc metal are generally not recommended. Apply 3MTM FireDamTM Intumescent Coating WB 1000 only to primed surfaces. Site conditions and end-use may dictate specific primer specifications. Follow primer manufacturer’s instructions.
9. Application Rates Refer to the 3MTM FireDamTM Intumescent Coating WB 1000 fire test design information to determine the minimum dry film thickness required for the size and orientation of steel element to be protected and for the required fire resistance rating. 3MTM FireDamTM Intumescent Coating WB 1000 should be applied in sufficient wet film thicknesses to achieve the required fire resistive rating with as many es as necessary, to attain required (DFT) dry film thickness. 3M™ FireDam™ Intumescent Coating WB 1000 should not be applied when relative humidity exceeds 80% or the surface to be coated is less than 3˚C above the dewpoint. The product is recommended to be applied only when temperatures are above 10˚C or 50˚F. To ensure an even coating thickness, the desired thickness should be achieved by the application of successive coats of no more than 500 microns dft (760 microns wft) per coat. Apply in sufficient thickness to achieve rating to uniform density and texture. The completed dry film thickness should be checked to ensure the required thickness has been applied. When multiple coats of 3M™ FireDam™ Intumescent Coating WB 1000 are required to achieve the prescribed dry film thickness, adequate drying time between the coats should be allowed. At 20˚C the minimum overcoating time is typically 4-6 hours. (The time will vary depending upon the prevailing temperature, relative humidity, air movement and thickness of material applied).
5
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 6
3MTM FireDamTM Intumescent Coating WB 1000 10. Coverage Chart based on laboratory results of 3MTM FireDamTM Intumescent Coating WB 1000.
Imperial Area (sq. feet) 100 200 300 400 500 600 700 800 900 1000
Volume / Pail (gal) 5 5 5 5 5 5 5 5 5 5
Volume % 66 66 66 66 66 66 66 66 66 66
WFT (mil) 80.21 40.10 26.74 20.05 16.04 13.37 11.46 10.03 8.91 8.02
DFT (mil) 52.94 26.47 17.65 13.23 10.59 8.82 7.56 6.62 5.88 5.29
WFT (mm) 1.89 0.95 0.63 0.47 0.38 0.32 0.27 0.24 0.21 0.19
DFT (mm) 1.25 0.62 0.42 0.31 0.25 0.21 0.18 0.16 0.14 0.12
Metric Area (sq. meter) 10 20 30 40 50 60 70 80 90 100
Volume / Pail (L) 18.93 18.93 18.93 18.93 18.93 18.93 18.93 18.93 18.93 18.93
Volume % 66 66 66 66 66 66 66 66 66 66
6
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
MANUAL:Layout 1
9/30/08
2:32 PM
Page 7
3MTM FireDamTM Intumescent Coating WB 1000 11. Topcoats A compatible topcoat with 3MTM FireDamTM Intumescent Coating WB 1000 is recommended for all installations, in order to give the desired colour. All topcoats should be applied in accordance with the topcoat manufacturer’s recommendations. Either acrylic or silicone alkyd paint to match surroundings are recommended. Ensure the 3MTM FireDamTM Intumescent Coating WB 1000 is thoroughly dry before application of topcoat.
12. Precautions & Safe Handling Information Follow approved working practices. Wear government approved respirators and proper clothing, reading all warning labels, and follow instruction on the MSDS.
13. Maintenance No maintenance is required when installed in accordance with the 3M installation manual. Once installed, if any section of the 3MTM FireDamTM Intumescent Coating WB 1000 is damaged, the damaged section should be repaired (touched up) by a 3M trained and certified applicator.
7
0808-3086E 3M FD Intumescent Coating WB 1000 - INSTALLATION
3M Fire Protection Products 3M Canada Inc. London, Ontario, Canada 800 265 1840 www.3m.ca/ic
MANUAL:Layout 1
9/30/08
2:32 PM
Page 8
3M and FireDam are trademarks of 3M. Used under licence in Canada. © 2008, 3M All rights reserved. Printed in Canada 1009-03119E 8
Related Documents 3m3m1z
Installation Manual 6d2b32
August 2022 0
Installation Manual 6d2b32
October 2022 0
Ncb Installation Operation Manual 1k5926
October 2019 78
Maytag Dryer Installation Manual 3u5s9
October 2019 76
Vtigercrm Installation Manual Windows 721t5r
November 2019 44