Iso Standards Handbook : Technical Drawings 3t351l
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Iso Standards Handbook : Technical Drawings as PDF for free.
More details w3441
- Words: 938
- Pages: 3
ISO Standards Handbook:
Technical drawings Volume 1:
Technical drawings in general
2002, Ed. 4, 826 p., ISBN 92-67-10370-9
Contents Part 1 : Technical drawings in general ISO 128-20:1996
Technical drawings — General principles of presentation — Part 20: Basic conventions for lines
ISO 128-21:1997
Technical drawings — General principles of presentation — Part 21: Preparation of lines by CAD systems
ISO 128-22:1999
Technical drawings — General principles of presentation — Part 22: Basic conventions and applications for leader lines and reference lines
ISO 128-23:1999
Technical drawings — General principles of presentation — Part 23: Lines on construction drawings
ISO 128-24:1999
Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings
ISO 128-25:1999
Technical drawings — General principles of presentation — Part 25: Lines on shipbuilding drawings
ISO 128-30:2001
Technical drawings — General principles of presentation — Part 30: Basic conventions for views
ISO 128-34:2001
Technical drawings — General principles of presentation — Part 34: Views on mechanical engineering drawings
ISO 128-40:2001
Technical drawings — General principles of presentation — Part 40: Basic conventions for cuts and sections
ISO 128-44:2001
Technical drawings — General principles of presentation — Part 44: Sections on mechanical engineering drawings
ISO 128-50:2001
Technical drawings — General principles of presentation — Part 50: Basic conventions for representing areas on cuts and sections
ISO 129:1985
Technical drawings — Dimensioning — General principles, definitions, methods of execution and special indications
ISO 406:1987
Technical drawings — Tolerancing of linear and angular dimensions
ISO 2553:1992
Welded, brazed and soldered ts — Symbolic representation on drawings
ISO 3098-0:1997
Technical product documentation — Lettering — Part 0: General requirements
Technical drawings, Ed. 4, Vol. 1
Page 1 of 3
ISO 3098-2:2000
Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks
ISO 3098-3:2000
Technical product documentation — Lettering — Part 3: Greek alphabet
ISO 3098-4:2000
Technical product documentation — Lettering — Part 4: Diacritical and particular marks for the Latin alphabet
ISO 3098-5:1997
Technical product documentation — Lettering — Part 5: CAD lettering of the Latin alphabet, numerals and marks
ISO 3098-6:2000
Technical product documentation — Lettering — Part 6: Cyrillic alphabet
ISO 3272-1:1983
Microfilming of technical drawings and other drawing office documents — Part 1: Operating procedures
ISO 3272-2:1994
Microfilming of technical drawings and other drawing office documents — Part 2: Quality criteria and control of 35 mm silver gelatin microfilms
ISO 3272-3:2001
Microfilming of technical drawings and other drawing office documents — Part 3: Aperture card for 35 mm microfilm
ISO 3272-4:1994
Microfilming of technical drawings and other drawing office documents — Part 4: Microfilming of drawings of special and exceptional elongated sizes
ISO 3272-5:1999
Microfilming of technical drawings and other drawing office documents — Part 5: Test procedures for diazo duplicating of microfilm images in aperture cards
ISO 3272-6:2000
Microfilming of technical drawings and other drawing office documents — Part 6: Quality criteria and control of systems for enlargements from 35 mm microfilm
ISO 5261:1995
Technical drawings — Simplified representation of bars and profile sections
ISO 5455:1979
Technical drawings — Scales
ISO 5456-1:1996
Technical drawings — Projection methods — Part 1: Synopsis
ISO 5456-2:1996
Technical drawings — Projection methods — Part 2: Orthographic representations
ISO 5456-3:1996
Technical drawings — Projection methods — Part 3: Axonometric representations
ISO 5456-4:1996
Technical drawings — Projection methods — Part 4: Central projection
ISO 5457:1999
Technical product documentation — Sizes and layout of drawing sheets
ISO 6412-1:1989
Technical drawings — Simplified representation of pipelines — Part 1: General rules and orthogonal representation
ISO 6412-2:1989
Technical drawings — Simplified representation of pipelines — Part 2: Isometric projection
ISO 6412-3:1993
Technical drawings — Simplified representation of pipelines — Part 3: Terminal features of ventilation and drainage systems
ISO 6413:1988
Technical drawings — Representation of splines and serrations
ISO 6428:1982
Technical drawings — Requirements for microcopying
ISO 6433:1981
Technical drawings — Item references
ISO 7200:1984
Technical drawings — Title blocks
ISO 7573:1983
Technical drawings — Item lists
Technical drawings, Ed. 4, Vol. 1
Page 2 of 3
ISO 12753-1:1999
Comes — Part 1: Nomenclature, illustrations and equivalent
ISO 12753-2:1999
Comes — Part 2: Requirements, designation and marking
ISO 10209-1:1992
Technical product documentation — Vocabulary — Part 1: relating to technical drawings: general and types of drawings
ISO 10209-2:1993
Technical product documentation — Vocabulary — Part 2: relating to projection methods
ISO 10209-4:1999
Technical product documentation — Vocabulary — Part 4: relating to construction documentation
ISO/TR 10623:1991
Technical product documentation — Requirements for computer-aided design and draughting — Vocabulary
ISO 11442-1:1993
Technical product documentation — Handling of computer-based technical information — Part 1: Security requirements
ISO 11442-2:1993
Technical product documentation — Handling of computer-based technical information — Part 2: Original documentation
ISO 11442-3:1993
Technical product documentation — Handling of computer-based technical information — Part 3: Phases in the product design process
ISO 11442-4:1993
Technical product documentation — Handling of computer-based technical information — Part 4: Document management and retrieval systems
ISO 11442-5:1999
Technical product documentation — Handling of computer-based technical information — Part 5: Documentation in the conceptual design stage of the development phase
ISO 13567-1:1998
Technical product documentation — Organization and naming of layers for CAD — Part 1: Overview and principles
ISO 13567-2:1998
Technical product documentation — Organization and naming of layers for CAD — Part 2: Concepts, format and codes used in construction documentation
ISO/TR 13567-3:1999
Technical product documentation — Organization and naming of layers for CAD — Part 3: Application of ISO 13567-1 and ISO 13567-2
ISO 14985:1999
Hard-copy output of engineering drawings — Specification for the structure of control files
Technical drawings, Ed. 4, Vol. 1
Page 3 of 3
Technical drawings Volume 1:
Technical drawings in general
2002, Ed. 4, 826 p., ISBN 92-67-10370-9
Contents Part 1 : Technical drawings in general ISO 128-20:1996
Technical drawings — General principles of presentation — Part 20: Basic conventions for lines
ISO 128-21:1997
Technical drawings — General principles of presentation — Part 21: Preparation of lines by CAD systems
ISO 128-22:1999
Technical drawings — General principles of presentation — Part 22: Basic conventions and applications for leader lines and reference lines
ISO 128-23:1999
Technical drawings — General principles of presentation — Part 23: Lines on construction drawings
ISO 128-24:1999
Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings
ISO 128-25:1999
Technical drawings — General principles of presentation — Part 25: Lines on shipbuilding drawings
ISO 128-30:2001
Technical drawings — General principles of presentation — Part 30: Basic conventions for views
ISO 128-34:2001
Technical drawings — General principles of presentation — Part 34: Views on mechanical engineering drawings
ISO 128-40:2001
Technical drawings — General principles of presentation — Part 40: Basic conventions for cuts and sections
ISO 128-44:2001
Technical drawings — General principles of presentation — Part 44: Sections on mechanical engineering drawings
ISO 128-50:2001
Technical drawings — General principles of presentation — Part 50: Basic conventions for representing areas on cuts and sections
ISO 129:1985
Technical drawings — Dimensioning — General principles, definitions, methods of execution and special indications
ISO 406:1987
Technical drawings — Tolerancing of linear and angular dimensions
ISO 2553:1992
Welded, brazed and soldered ts — Symbolic representation on drawings
ISO 3098-0:1997
Technical product documentation — Lettering — Part 0: General requirements
Technical drawings, Ed. 4, Vol. 1
Page 1 of 3
ISO 3098-2:2000
Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks
ISO 3098-3:2000
Technical product documentation — Lettering — Part 3: Greek alphabet
ISO 3098-4:2000
Technical product documentation — Lettering — Part 4: Diacritical and particular marks for the Latin alphabet
ISO 3098-5:1997
Technical product documentation — Lettering — Part 5: CAD lettering of the Latin alphabet, numerals and marks
ISO 3098-6:2000
Technical product documentation — Lettering — Part 6: Cyrillic alphabet
ISO 3272-1:1983
Microfilming of technical drawings and other drawing office documents — Part 1: Operating procedures
ISO 3272-2:1994
Microfilming of technical drawings and other drawing office documents — Part 2: Quality criteria and control of 35 mm silver gelatin microfilms
ISO 3272-3:2001
Microfilming of technical drawings and other drawing office documents — Part 3: Aperture card for 35 mm microfilm
ISO 3272-4:1994
Microfilming of technical drawings and other drawing office documents — Part 4: Microfilming of drawings of special and exceptional elongated sizes
ISO 3272-5:1999
Microfilming of technical drawings and other drawing office documents — Part 5: Test procedures for diazo duplicating of microfilm images in aperture cards
ISO 3272-6:2000
Microfilming of technical drawings and other drawing office documents — Part 6: Quality criteria and control of systems for enlargements from 35 mm microfilm
ISO 5261:1995
Technical drawings — Simplified representation of bars and profile sections
ISO 5455:1979
Technical drawings — Scales
ISO 5456-1:1996
Technical drawings — Projection methods — Part 1: Synopsis
ISO 5456-2:1996
Technical drawings — Projection methods — Part 2: Orthographic representations
ISO 5456-3:1996
Technical drawings — Projection methods — Part 3: Axonometric representations
ISO 5456-4:1996
Technical drawings — Projection methods — Part 4: Central projection
ISO 5457:1999
Technical product documentation — Sizes and layout of drawing sheets
ISO 6412-1:1989
Technical drawings — Simplified representation of pipelines — Part 1: General rules and orthogonal representation
ISO 6412-2:1989
Technical drawings — Simplified representation of pipelines — Part 2: Isometric projection
ISO 6412-3:1993
Technical drawings — Simplified representation of pipelines — Part 3: Terminal features of ventilation and drainage systems
ISO 6413:1988
Technical drawings — Representation of splines and serrations
ISO 6428:1982
Technical drawings — Requirements for microcopying
ISO 6433:1981
Technical drawings — Item references
ISO 7200:1984
Technical drawings — Title blocks
ISO 7573:1983
Technical drawings — Item lists
Technical drawings, Ed. 4, Vol. 1
Page 2 of 3
ISO 12753-1:1999
Comes — Part 1: Nomenclature, illustrations and equivalent
ISO 12753-2:1999
Comes — Part 2: Requirements, designation and marking
ISO 10209-1:1992
Technical product documentation — Vocabulary — Part 1: relating to technical drawings: general and types of drawings
ISO 10209-2:1993
Technical product documentation — Vocabulary — Part 2: relating to projection methods
ISO 10209-4:1999
Technical product documentation — Vocabulary — Part 4: relating to construction documentation
ISO/TR 10623:1991
Technical product documentation — Requirements for computer-aided design and draughting — Vocabulary
ISO 11442-1:1993
Technical product documentation — Handling of computer-based technical information — Part 1: Security requirements
ISO 11442-2:1993
Technical product documentation — Handling of computer-based technical information — Part 2: Original documentation
ISO 11442-3:1993
Technical product documentation — Handling of computer-based technical information — Part 3: Phases in the product design process
ISO 11442-4:1993
Technical product documentation — Handling of computer-based technical information — Part 4: Document management and retrieval systems
ISO 11442-5:1999
Technical product documentation — Handling of computer-based technical information — Part 5: Documentation in the conceptual design stage of the development phase
ISO 13567-1:1998
Technical product documentation — Organization and naming of layers for CAD — Part 1: Overview and principles
ISO 13567-2:1998
Technical product documentation — Organization and naming of layers for CAD — Part 2: Concepts, format and codes used in construction documentation
ISO/TR 13567-3:1999
Technical product documentation — Organization and naming of layers for CAD — Part 3: Application of ISO 13567-1 and ISO 13567-2
ISO 14985:1999
Hard-copy output of engineering drawings — Specification for the structure of control files
Technical drawings, Ed. 4, Vol. 1
Page 3 of 3
Related Documents 3m3m1z
Iso Standards Handbook : Technical Drawings 3t351l
December 2022 0
Iso Standards Handbook 6k3g3g
April 2023 0
Cblm_kinds Of Technical Drawings 6t6j3d
December 2019 61
Automoblox Technical Drawings 1x6z3d
November 2022 0
Iso Standards 29571c
November 2019 194
Din 6776 For Technical Drawings 3i3f6b
October 2021 0More Documents from "Alpha" 5k5a33
Iso Standards Handbook : Technical Drawings 3t351l
December 2022 0
Cm Movie List.pdf 4y45v
November 2019 76
Entrpreneurship Exam 201z5l
May 2020 6
Declaracion_interna.pdf 2m49x
October 2020 0
Os Chakras 2c5u2p
April 2020 47