Manual Adva Fsp 150cc-825 63p6t
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Manual Adva Fsp 150cc-825 as PDF for free.
More details w3441
- Words: 7,829
- Pages: 30
TM
Optical Networking
Fiber Service Platform 150CCf-825 (FSP 150CCf-825) FSP 150CCf-825 Release 2.1
Quick Start Guide 80000003806 Rev 1.0 December 2008
Copyright © 2001-2008 ADVA AG Optical Networking. All rights reserved. All rights reserved. Hardware and software mentioned in this document includes software developed by ADVA AG Optical Networking ("ADVA"), the Apache Software Foundation (http://www.apache.org), Teodor Danciu (http://jasperreports.sourceforge.net), and/or other open source software. Some software was created using ORBacus for Java by Object-Oriented Concepts, Inc.
Trademarks The ADVA, FSP, Etherjack and the Etherjack logo are trademarks or ed trademarks of ADVA in the United States, and/or other countries. All other company, product, or service mentioned in this document may be trademarks or service marks of ADVA or their respective owner.
Patents The content described in this document may be covered by patents or pending patent applications of ADVA. The furnishing of this document does not give you any license to these patents.
Disclaimers The content of this document could include technical inaccuracies or typographical errors, and is subject to change at any time without notice. Reliance on this content is at the relying party's sole risk and will not create any liability or obligation for ADVA. Any references in this document to non-ADVA publications and/or non-ADVA Internet sites are provided for convenience only and do not in any manner serve as an endorsement of those publications and/or Internet sites. The materials within those publications and/or Internet sites are not part of the materials for any ADVA information, product or service, and use of those publications and/or Internet sites is at your own risk.
THE CONTENT OF THIS DOCUMENT IS PROVIDED ''AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ADVA, ITS S, EMPLOYEES, OFFICERS OR ITS SUPPLIERS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS DOCUMENT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THE SAME APPLIES FOR ANY HARDWARE OR SOFTWARE COVERED BY THIS DOCUMENT, UNLESS A SIGNED AGREEMENT WITH ADVA OR THE APPLICABLE PRODUCT LIABILITY LAW EXPRESSLY STATES OTHERWISE.
ADVA AG Optical Networking Headquarters Campus Martinsried Fraunhoferstr. 9 A 82152 Martinsried/Muenchen
Phone+49(0)89-890665-848 Fax +49(0)89-890665-22848 www.advaoptical.com
TM
Optical Networking
FSP 150CCf-825 Quick Start Guide
1.1
Introduction
This document provides step by step procedures to help you locally provision the FSP 150CCf-825 Network Interface Device (NID) to a simple back-to-back configuration. When the procedures in this document have been completed, the FSP 150CCs will be provisioned from its default configuration to the following configuration (see Figure 1): • back-to-back FSP 150CCs on a desk-top (no wall or rack mounting) • FSP 150CC IP address provisioned • Minimum required system and WAN interface provisioning • New s, including new super • VLAN-based WAN management tunnel with PPP layer 2 protocol, DH disabled and RIP V2 packets enabled • Management LAN port disabled at the SNE (Subtending Network Element) • LAN port(s) configured in Transparent EVC (Ethernet Virtual Circuit) mode • SNMP provisioned to enable remote alarm monitoring Figure 1 Simple Back-to-Back Configuration ed in This Document GNE FSP 150CC #1 LAN(s)
PSU1
PSU2 Status
Management Critical
Status
Major
100 240V AC
Etherjack
2
4
RS 232
Minor Status
Access
Network
4 3 2 1
TM
LAN 1
3
SNE FSP 150CC #2
WAN Lk Rate
5
Lk Rate
FSP150CCf Lk Rate
1
PSU1
PSU2 Status
Active 2 1
Management Critical
Status
Major
100 240V AC
Etherjack
2
Minor Status
Access
Network
4 3 2 1
LAN 1
2
4
RS 232
TM
3
Lk Rate
5
Lk Rate
FSP150CCf Lk Rate
1
LAN(s)
Active 2 1
2
RIP Enabled Management Tunnel GNE = Gateway Network Element SNE = Subtending Network Element
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 1
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
All other features will utilize the system default configuration. If your desired configuration varies from this basic configuration, then provisioning is required. If this is the case, refer to the FSP 150CCf-825 Installation and Operations Manual for provisioning data and procedures. For CLI provisioning and CLI command structure information, refer to the FSP 150CCf-825 Etherjack OS (EOS) Command Line Interface Handbook.
Firmware Release Levels ed in This Release This version of the FSP 150CCf-825 Quick Start Guide is applicable to the FSP 150CCf-825 software release 2.1. This version of FSP 150CCf-825 is compatible with the nVision Network Management System software release 9.0 or greater.
Audience The reader must have sufficient knowledge of the following when using this document: • IP addressing • WAN facility provisioning requirements • LAN EVC provisioning requirements • fiber handling and cleaning procedures (if connecting fiber cables) • power handling and connection procedures (if connecting DC power)
Obtaining Technical Assistance Product Maintenance Agreements and other customer assistance agreements are available for ADVA Optical Networking AG products through your ADVA Optical Networking distribution channel. Technical is available to warranty or maintenance contract customers who need technical assistance with an ADVA Optical Networking product that is under warranty or covered by a maintenance contract. To display ADVA Optical Networking’s Technical web site that includes all information, go to ADVA Optical Networking’s home page at http://www.advaoptical.com and select the “” button. ADVA Optical Networking’s service options include: • 24 X 7 telephone • Web-based tools • On-site • Technical training, both on-site and at ADVA facilities in and the USA • Expedited repair service • Extended hardware warranty service Page 2
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
1.2
Physical Installation
The FSP 150CC installation requires that you establish WAN facility connections between your local and remote sites, or between your local site and the telco. After your end-to-end connection has been installed, you are ready to install the FSP 150CCf-825. The FSP 150CCf-825 is designed for deployment in both customer premises and CO locations. Wall mount and rack mount brackets, as well as power options, may be ordered separately. Refer to the FSP 150CCf-825 Installation and Operations Manual for power and mounting ordering options.
1.2.1 Power Options and Wiring The following provides power supply requirements as well as instructions for installing the power and cabling for the FSP 150CCf-825. Refer to the FSP 150CCf-825 Installation and Operations Manual and the following information for determining PSU and/or power adapter cabling requirements for your site.
Power Requirements The system is powered by dual AC and/or DC Power Supply Units (PSUs). PSUs can be of similar type or mixed, and are hot swapable. It can be equipped with two AC modules, two DC modules, or one of each. They are physically accessed at the front of the unit and source connections are located on the front of each PSU module. Optionally, a third possible power source, an external AC to 12 VDC power converter, may be used. The 12 VDC power converter may be used alone, or mixed with AC and/or DC power supply modules. It is physically connected at the rear of the unit. AC power converters may be ordered separately for North American and international location. If an external AC power converter and/or one PSU module fails - or its input source fails, the remaining module continues to power the system without interruption to system function. Note: The power supplies are not designed to operate in load-sharing mode.
AC Supply The system operates with an AC source fused at 15A, with the voltage range specified in ANSI specification C84.1-1989, Voltage Ratings (60 Hz) for Electric Power Systems Equipment, Range B. The FSP 150CCf-825 can tolerate any frequency within the range of 60 (+/-3) Hz for North American applications, and the range of 50 (+/-3) Hz for European applications. The maximum power consumption from the 230 VAC supply is 40W.
DC Supply The DC power connector is a 3-pin socket (Battery, Return, Frame Ground) which includes a mated connector, providing protection against improper (reversed polarity) connection at the NID. The maximum power consumption from the -48 VDC supply is 40W. External fuse rating 80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 3
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
is 5A. The FSP 150CCf-825 operates properly when supplied with minimum and maximum operating voltages for North American and International applications, as shown in Table 1-1. Table 1-1 Minimum and Maximum Operating Voltages Nominal Voltage
Minimum Maximum Minimum Maximum Operating Voltage Operating Voltage Abnormal Voltage Abnormal Voltage
-48
-40.5
-57.0
0
-60.0
-60
-50
-72
0
-75
External AC to 12 VDC Power Converter The system also provides an optional AC to 12 VDC converter input on the rear , externally fused at 15A. North American and International versions are available (see the FSP 150CCf-825 Installation and Operations Manual for converter options and part numbers).
Connect Cables and Apply Power For all FSP 150CCf-825 installations, you will need the proper PSU, power cables and/or power adapter for your site, and cabling related tools and supplies, as required by local practices. For DC powered FSP 150CCf-825 power supply units, you will need the following items for this procedure: • Screwdriver • Wire wrap tool • Wire cutters • Wire strippers • Volt meter • Fuse • Other power related tools and supplies as required by local practices For optical cabling installation, you will need the following items for this procedure: • Optical Power Meter • Fiber Cleaner • Small Form-factor Plug-ables (SFPs), as required If required, refer to the FSP 150CCf-825 Installation and Operations Manual for connector and LED descriptions when performing the following procedure. Page 4
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Procedure Mount the FSP 150CC to a Wall or Rack, as required Step 1
For desktop or communications closet installations, go to the next step. Otherwise, mount the FSP 150CCs, as required. Mounting adapters are provided for mounting to a wall, 19” rack or 23” rack. Refer to FSP 150CCf-825 Installation and Operations Manual for detailed procedures. If additional FSP 150CCs are to be stacked above each other, are installed above heat producing components, or are installed below heat sensitive components, some FSP 150CC variants require that heat deflector(s) are installed. Install air deflector(s) as described in Table 2. Table 2 Air Flow Requirements for the FSP 150CCf-825 Air Flow Requirements
Multiple units may be stacked up to 5 rows high in an environmentally controlled environment, such as a Central Office. A heat deflector should be installed between every 5 rows of FSP 150CC NIDs. If it is necessary to install 5 rows of NIDs above other heat producing components, it is recommended that a heat deflector is installed below the NIDs. If it is necessary to install heat sensitive equipment above 5 rows of NIDs, it is recommended that a heat deflector is installed above the NIDs.
Insert SFPs, Run and Connect Power Cables Step 2
Connect the ground cable, as required.
Step 3
If using optical WAN/LAN interfaces: Obtain the proper SFP (Small Form-factor Plug-able), and insert it/them into the optical port(s).
Step 4
Determine the next step. Current Status
Then
Does/will the FSP 150CCf-825 include a DC power supply unit?
Continue with the next step.
Does/will the FSP 150CCf-825 NOT include a DC power supply unit?
Go to Step 17.
DANGER — Avoid the risk of electrical shock. Follow local procedures for working with electrical power. High voltage may be present in the following tasks. Shut off the power from the power source or turn off the circuit breakers before proceeding. Use properly insulated tools when working with power connections. Do not allow any metal objects to connect across power terminals.
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 5
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 5
that the office DC power supply is set up to deliver the correct operating voltage to the FSP 150CCf-825 (between -40.5 and -72 VDC). that the correct fuse or breaker (5 A rating) is installed at the power supply source and that power is turned off. Repeat for a second DC power supply source, if present.
Step 6
Using a volt meter, measure the voltages at the source power supply terminals. that no voltage is present. Repeat for a second DC power supply source, if present.
Step 7
Run the DC power cables (shipped with the power supply unit) from the FSP 150CCf-825 to the office battery terminals. Dress the power cables. Repeat for a second DC power supply unit, if present.
Step 8
Remove the blank PSU front , then insert the DC power supply unit into the front . Repeat for a second DC power supply unit, if present. If the second PSU slot is unused, ensure that a blank PSU card is inserted into the slot. Tighten the thumb screws on both PSU slots.
Step 9
Connect the green Frame Ground wires to the Frame Ground terminal. Repeat for a second DC power supply unit, if present.
Step 10 Connect the black Office Return wires to the RTN DC power supply terminals. Repeat for a second DC power supply unit, if present. Step 11 Connect the red Office Battery wires to the BATT DC power supply terminals. Repeat for a second DC power supply unit, if present. Step 12 that all power terminal connections are tight and that no strands of wire are shorting terminals together. Repeat for a second DC power supply unit, if present. Step 13 Reconnect the office power source (reinstall fuses, reset breakers or turn on supply). Repeat for a second DC power supply unit, if present. Step 14 Use a volt meter to the A side power and ground at the power terminals. Ensure that the voltage between BATT and RTN terminals measures between -40.5 and -72 VDC. Repeat for a second DC power supply unit, if present. Step 15 Using a volt meter, measure the voltage between RTN and Frame GND terminals. that 2 VDC or less is present. Repeat for a second DC power supply unit, if present. Step 16 Connect the power cables to FSP 150CCf-825 front connectors (red wire / connector release tab oriented at the bottom). Repeat for a second DC power supply unit, if present. The power supply Status LED should illuminate green. During the power cycle, the front Status LED will illuminate red for approximately 1 minute, then will change to solid green.
Page 6
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 17 Determine the next step. Current Status
Then
Does/will the FSP 150CCf-825 include an AC power supply unit at the front ?
Continue with the next step.
Does/will the FSP 150CCf-825 NOT include an AC power supply unit at the front , but a 12 VDC rear connector power adapter will be used?
Go to Step 22.
Only DC power will be used in this installation?
Go to Step 23.
Step 18 Run the AC power cable (shipped with the FSP 150CCf-825 power supply unit) from the FSP 150CCf-825 to the AC power outlet, externally fused at 15A. Dress the power cables. Repeat for a second AC power supply unit, if present. Step 19 Remove the blank PSU front , then insert the AC power supply unit into the front . Repeat for a second AC power supply unit, if present. If the second PSU slot is unused, ensure that a blank PSU card is inserted into the slot. Tighten the thumb screws on both PSU slots. Step 20 Insert the power cable into the PSU front connector. Then insert the power cable into the AC power outlet. Repeat for a second AC power supply unit, if present. The power supply Status LED should illuminate green. If AC power is the only power source: During the power cycle, the front Status LED will illuminate red for approximately 1 minute, then will change to solid green.
Step 21 Determine the next step. Current Status
Then
Will a rear accessible 12 VDC power adapter be used?
Continue with the next step.
No rear accessible 12 VDC power adapter will be used?
Go to Step 23.
Step 22 Connect the power adaptor cable to the power connector (PWR) located at the rear , connect the power cord into the power adapter, then plug the AC adaptor to an AC (120V or 240V) wall outlet, externally fused at 15A. If this is the only power source: During the power cycle, the front Status LED will illuminate red for approximately 1 minute, then will change to solid green.
Step 23 Tie-off and secure all power cabling.
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 7
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Run and Connect Metallic Cables Step 24 Run the MGMT LAN port cable and metallic LAN port cables to the FSP 150CCf-825, as required. Temporarily secure the cables. Step 25 Connect a LAN Cable to the MGMT LAN port and connect the other end of the cable to your networking gear (PC, hub, switch, or router). From the factory, the default IP address of the FSP 150CCf-825 is: 192.168.0.2/24. Step 26 Determine the next step. Current Status
Then
Are you only installing fiber optic WAN and LAN cables, and no metallic cables are to be installed?
Go to Step 36.
Are metallic WAN or LAN cable terminations required for this FSP 150CCf-825?
Continue with the next step.
Step 27 For metallic WAN interface(s): Connect the WAN cable(s) to the designated WAN port(s) using a Cat 5 LAN cable (RJ-45 connector). Otherwise, go to the next step. Step 28 For metallic LAN interface(s): Connect the client Ethernet communications equipment (PC, hub, switch, or router) to the first designated client LAN port using a Cat 5 LAN cable (RJ-45 connector). Repeat for each additional client LAN port, as required. Otherwise, go to the next step. Step 29 Tie-off and secure all metallic cabling. Step 30 Determine the next step. Current Status
Then
Are only metallic cable terminations required for this FSP 150CCf-825 and cabling is complete?
Go to Step 36.
Are you installing any fiber optic cables?
Continue with the next step.
Run and Connect Fiber Optic Cables The following precautions should be applied when handling fiber optic cables:
DANGER — Follow local safety procedures regarding fiber optic cables. Never look at the end of a fiber optic cable. Permanent eye damage or blindness can occur. All optical connectors are shipped with protective caps. Ensure that protective caps are firmly in place before running any fiber optic cables. Page 8
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
DANGER — Never handle exposed fiber optic cables with bare hands or touch it to your body. A fiber fragment could enter the skin and be very difficult to detect and remove. CAUTION — Optical power performance is affected by dust. Clean all connectors before performing measurements. Keep the ends of the fiber optic cables covered when the cables are not in use. The need for cleaning can be minimized if covers are always used when fibers are not used. Refer to local practices for fiber handling and cleaning procedures. Clean all connectors before performing measurements. WARNING — Prevent damage to fiber optic cables. Do not bend fiber optic cables to a radius less than 50 mm. WARNING — To avoid damage to optical receivers, do not connect any fibers until instructed to do so. Always check optical levels before connecting fiber optic cables. Step 31 Run the optical fiber cables to the FSP 150CCf-825. Do not connect the cable(s) to the FSP 150CCf-825 connectors at this time. They will be connected later. Step 32 Dress all fiber optic cables. Use local practices for protecting all cables and connectors. Step 33 Test the optical cables according to local practices. Step 34 Measure the transmit and receive levels of the fiber optic cables and record them for future reference. Step 35 Connect the optical interface cables to the appropriate WAN and/or LAN SFP connectors on the front . WAN and LAN LED Indicators Step 36 Observe the client LAN LED(s) and refer to FSP 150CCf-825 Installation and Operations Manual for LED descriptions. If the LAN LED(s) indicate anything other than the appropriate response for the current state, troubleshoot as necessary. Step 37 Observe the WAN (Network) LED and refer to FSP 150CCf-825 Installation and Operations Manual for LED descriptions. If the WAN LED(s) indicate anything other than the appropriate response for the current state, troubleshoot as necessary. End of Procedure
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 9
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
1.3
TM
Optical Networking
Provision the FSP 150CC
Perform the following procedure to provision the FSP 150CC. The following procedure will be performed using the RS-232 serial console using CLI commands and ADVA Optical Networking’s eVision Web Browser Management Tool. Refer to Figure 2 for an example of the configuration ed by the following procedure. You will need the following items for this procedure: • DB-9 to RJ-45 converter (included in the FSP 150CC kit) • Category 5 LAN cable (with RJ-45 connectors) for Serial Port RS-232 connection (included in the FSP 150CC kit) • A communications program, like TeraTerm Pro Web (a free software terminal emulator for MS-Windows) or HyperTerminal (a standard Windows communications utility) • Internet Explorer 5.0 or greater Figure 2 Back-to-Back Configuration ed in the Following Procedure SNE FSP 150CC #2
GNE FSP 150CC #1 PSU1
PSU2 Status
Management Critical
Status
Major
100 240V AC
Etherjack
2
4
RS 232
Minor Status
Access
Network
4 3 2 1
TM
LAN 1
3
Lk Rate
5
Lk Rate
FSP150CCf Lk Rate
1
WAN
PSU1
PSU2 Status
Management Critical
Status
Major
Active 2 1
100 240V AC
Etherjack
Minor Status
Management Tunnel
Proxy ARP = Enabled Default Router = 192.168.2.1
MGMT LAN Port IP Address = 192.168.2.2 Subnet Mask = 255.255.255.0
VLAN Based, VLAN ID = 100 Layer 2 Protocol = PPP DH = disabled RIP V2 Packets = enabled
4
Access
Network
4 3 2 1
LAN 1
2
System
2
RS 232
TM
3
Lk Rate
5
Lk Rate
FSP150CCf Lk Rate
1
Active 2 1
2
System Proxy ARP = Disabled Default Router = None
MGMT LAN Port IP Address = 192.168.2.3 Subnet Mask = 255.255.255.0
Static Route Interface = WAN IP Address = 0.0.0.0 Subnet Mask = 0.0.0.0
eVision Workstation IP Address = 192.168.2.5 Subnet Mask = 255.255.255.0 Default Gateway = 192.168.2.1
Page 10
GNE = Gateway Network Element SNE = Subtending Network Element
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Procedure Perform the following steps at FSP 150CC #2 (SNE): Set the FSP 150CC’s IP Address Step 1
Connect the console cable between the FSP 150CC RS-232 Serial Console Port and a PC using the RJ-45 cable and the DB-9 converter.
Step 2
From the PC, start a communications utility application (such as TeraTerm Pro Web or HyperTerminal) with the following COM port settings: Note: The Serial Console Port s only 9600 baud. Do not use Autobaud. Table 1-1 COM Port Settings PARAMETER
SETTING
Rate
9600 baud
Data Bits
8
Stop Bits
1
Parity
No
Flow Control
None
Step 3
Hit the “Enter” key and you will be prompted to enter a and . The default and are ‘root’ and ‘ChgMeNOW,’ respectively. A warning banner displays and the is prompted to reply [Y|N]. Enter “y” and the serial console CLI prompt (-->) is displayed.
Step 4
Enter the show mgmttnl e1000-wan-1 command followed by a carriage return to view the current WAN DH setting. See the following example:
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 11
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
--> show mgmttnl e1000-wan-1 Management Tunnel: e1000-wan-1 Tunnel Mode: None Encapsulation: Ethernet Tunnel VLAN ID: 4095 Tunnel S-Tag: Disabled Tunnel S-Tag VLAN ID: 4095 IP Address: 0.0.0.0 Subnet Mask: 255.255.255.0 MAC Address: 00:0B:90:00:47:81 DH: Enabled RIPv2: Disabled ACL Inbound Filtering: Disabled
Step 5
Observe the DH setting to determine the next step. Current Status
Then
Is the WAN port DH status set to the desired state of Disabled?
Go to Step 9.
Does the WAN port DH setting need to be changed?
Continue with the next step.
Step 6
Use the configure mgmttnl e1000-wan-1 command followed by a carriage return. A next level prompt will appear. Then enter dh disable followed by a carriage return. For example: --> configure mgmttnl e1000-wan-1 config:mgmttnl(e1000)--> dh disable config:mgmttnl(e1000)-->
Step 7
Enter show this followed by a carriage return to the changes.
Step 8
Enter exit to go back one level.
Step 9
Enter the IP address and subnet mask, by entering configure system followed by a carriage return. A next level prompt will appear. Then enter ip-address <subnet mask>. --> configure system config:sys --> ip-address 192.168.2.3 255.255.255.0 config:sys -->
Page 12
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 10 the changes by entering show ip followed by a carriage return. The Management LAN port IP information displays: config:sys --> show ip System IP Information: IP Address: Subnet Mask:
192.168.2.3 255.255.255.0
Default Gateway:
WARNING — Do not remove power while performing the next step. Removing power while the operation in progress may corrupt the database. Step 11 Enter database save followed by a carriage return. The system will display a warning message and when complete, the CLI prompt will appear, as shown below: config:sys --> database save Saving configuration. Do not power down the system. config:sys -->
Step 12 Enter followed by a carriage return. The prompt will appear
Step 13 Remove commissioning cables from the RS-232 port and the PC. Establish Communications via eVision the local Management LAN port communication settings by accessing the FSP 150CC’s eVision Web Browser Management Tool. Perform the following steps: Step 14 Change your PC IP address to successfully access the FSP 150CC’s Management LAN port IP address. Step 15 Use an Ethernet Category 5 LAN cable to connect your PC to the FSP 150CC Management LAN port. Refer to the FSP 150CCf-825 Installation and Operations Manual for the Management LAN port connector location, if required. Step 16 Activate an Internet Explorer web browser on your PC by double clicking on the shortcut icon. Step 17 Enter the FSP 150CC’s Management LAN port IP address in the web browser address field and enter return. A security alert window will appear 80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 13
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 18 that the security certificate is valid. Select Yes to proceed. The FSP 150CC window appears
Step 19 Enter the default ID root and ChgMeNOW.
Page 14
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 20 Select . The default security banner displays as shown in the following example
Note: If a error appears, re-enter the ID and . Up to 3 attempts will be processed. On a failed third attempt, the web browser will redirect to a 401 error page (Unauthorized error). If this occurs, the process must be re-started by going back to the web browser home page and re-entering the FSP 150CC IP address (at Step 17).
Step 21 Select Continue. The eVision Web Browser Management Tool will display, as shown in the following example (see the following eVision Web Browser Management Tool components)
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 15
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Title Bar
Name
Tool Bar
Menu Bar
System Name Menu Tree View Tabs Entity View Area
Status Bar
Alarms Window
Secure Session Indicator
Provision the WAN Interface Step 22 Expand nested items in the System Name entity by selecting the “+” next to the System Name entity in the menu tree (default is FSP150CCf-825). Step 23 Enter a right mouse click on the WAN entity. A drop down menu displays
Page 16
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 24 Select Edit Facility. The Edit Facility view displays
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 17
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 25 Use the following WAN interface options (as applicable) to provision the WAN interface with the minimal WAN interface provisioning options required prior to setting up WAN port communications (see Chapter 5 of the FSP 150CCf-825 Installation and Operations Manual for WAN interface configuration options and rules): Table 1-2 Minimum WAN Interface Provisioning via CLI Commands Command
Description
WAN Port state
Defines the WAN facility istrative state.
media
Defines the WAN interface media type.
speed
Defines the line rate of the Ethernet port and whether it is in half duplex or full duplex mode.
Step 26 Select OK. The WAN Facility view displays the changes made
Step 27 WAN changes made. Edit WAN Management Tunnel Step 28 Right-click on MGMT Tunnel [WAN] and select Edit Mgmt Tunnel. The Management Tunnel view displays
Page 18
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 29 Set Tunnel Mode to VLAN Based. Step 30 Set Layer 2 Protocol to PPP. Step 31 Enter the VLAN ID. (Default is 4095. The same VLAN ID number must be used for both FSP 150CCs.) Step 32 Set the DH setting to Disabled. Step 33 Set the ACL InBound Filtering setting to Disabled. Step 34 Set the RIP setting to Enable. Step 35 Select OK. Step 36 the WAN management tunnel settings. Step 37 Select File and then Save Changes from the menu bar to save the configuration.
WARNING — Do not remove power while performing the next step. Removing power while the operation in progress may corrupt the database. Step 38 Select OK. Create New Super and Delete Default Super , if Required Step 39 If a new Super is not required and the default Super is sufficient at this time, go to Step 53. Otherwise continue with the next step to create a new Super and delete the default Super . Step 40 Expand nested items in the istration entity by selecting the “+” next to the istration entity in the menu tree. Step 41 Right click on s and select Create New . A Create New window displays in the view area Step 42 Complete the following fields: • ID - The ID (UID) is a unique, non confidential name to identify each authorized NE . Enter a new name, which contains 6 to 10 alphanumeric characters. • - Enter the ID (PID), which contains between 6 and 10 characters. The PID must contain at least two non-alpha characters and one special character. Special characters include *, # and %. • Confirm - Re-enter the ID. • Privilege - Select the desired access security level (select Super to create a new Super ). • GUI Timeout Value - Enter a timeout value of 0 (to disable ) to 99 (minutes). Default is 30 (minutes). • Comment - Enter a comment, if desired. 80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 19
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 43 Select OK. The new information is displayed in the s view Step 44 Expand the s tree. The new is listed Step 45 Select the new name and view the new information to new entry. (The new is not displayed for security reasons.) Step 46 Activate a new Internet Explorer web browser window on your PC by double clicking on the shortcut icon. Step 47 Enter the FSP 150CC’s Management LAN port IP address in the web browser address field and enter return. The Screen will appear Step 48 Enter the new Super ’s name and and select OK. The eVision Web Browser Management Tool displays Step 49 Expand the System Name, istration and s entities by selecting the “+” next to each entity. Step 50 Enter a right click on the root and select Delete . Then select OK. The default root is removed from the menu tree Step 51 If desired, enter other s by repeating Step 41 through Step 45. Provision SNMP, if Required Step 52 If SNMP provisioning is not required, go to Step 59. Otherwise continue with the next step to provision SNMP. Step 53 Right click on the SNMP entity in the menu tree and select Add Community. The add community screen appears Step 54 Enter the desired Community Name, select the desired Access Type and then select Add. The new community information is displayed Step 55 Right click on the SNMP entity in the menu tree and select Add Target Address. The add target address screen appears Step 56 Select the desired Security Model and Credentials. Enter the desired IP Address and port. Then select Add. Step 57 Select the Target Addresses tab to the entry. Step 58 Repeat Step 53 through Step 57 as required.
Page 20
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Create Static Route (SNE only) Step 59 Right click on the Communications entity in the menu tree and select Create Static Route. The create static route screen appears
Step 60 For Route Type, select Interface, and for Interface, select Wan. Step 61 For IP Address, enter 0.0.0.0. Step 62 For IP Mask, enter 0.0.0.0. Step 63 Select OK. The Static Route entry displays in the Static Routes tab
Provision LAN(s) Step 64 Provision the LAN(s) by performing the procedure in Provision LAN(s) in Transparent EVC Mode, on Page 25.
Disable Local Management Port (SNE only) Step 65 Right click on the Local Management Port and select Edit Facility. The edit Local Management Port screen appears
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 21
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 66 Set the istration State to Disabled. Step 67 Select OK (communications will be dropped and the configuration will need to be saved using CLI, as described in the following steps). Note: The browser will appear to stay busy after OK is selected because it is attempting to reach the IP address of the FSP 150CC who’s Local Management Port has just been disabled. Step 68 Install the console cable between the FSP 150CC RS-232 Port and a PC using the RJ-45 cable and the DB-9 converter. Step 69 From the PC, start a communications utility application, such as HyperTerminal with the following COM port settings: Note: The Serial Console Port s only 9600 baud. Do not use Autobaud. COMM Port Parameter
COMM Port Setting
Rate
9600 baud
Data Bits
8
Stop Bits
1
Parity
No
Flow Control
None
Step 70 Hit the “Enter” key and you will be prompted to enter a and . The default and are ‘root’ and ‘ChgMeNOW,’ respectively. A warning banner displays and the is prompted to reply [Y|N]. Enter “y” and the serial console CLI prompt (-->) is displayed. Step 71 Enter show interface mgmt-lan followed by a carriage return. The DH setting will display, as shown below. that the istration State is set to Disabled. --> show interface mgmt-lan Management Interface:
mgmt-lan
istrative State:
Disabled
Operational State:
Disabled
MAC Address: MTU:
1500
Interface Speed:
Auto
Negotiated Speed:
Page 22
00:0B:90:00:08:31
100 Mb Full Duplex
DH:
Disabled
RIPv2:
Disabled
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
WARNING — Do not remove power while performing the next step. Removing power while the operation in progress may corrupt the database. Step 72 Enter database save followed by a carriage return. The system will display a warning message and when complete, the CLI prompt will appear, as shown below: --> database save Saving configuration. Do not power down the system. -->
Step 73 Enter followed by a carriage return. The prompt will appear Step 74 Remove any commissioning cables (Ethernet cable and/or console cable) from the FSP 150CC front connectors, as required. Step 75 that the WAN cable is connected to the FSP 150CC WAN port.
Perform the following at FSP 150CC #1 (GNE): Provision the FSP 150CC’s IP Address, WAN Interface, WAN Management Tunnel, New Super and SNMP Step 76 Perform Step 1 through Step 58. Provision LAN(s) Step 77 Provision the LAN(s) by performing the procedure in Provision LAN(s) in Transparent EVC Mode, on Page 25. Enable Proxy ARP at the GNE
CAUTION — Do not enable Proxy ARP if both units are connected to the same LAN via the Management LAN port. Otherwise, there will be multiple ARP responses for a single ARP request for a remote reachable IP address from each NE/FSP 150CC in the same LAN that has Proxy ARP enabled. Step 78 Right-click on the System Name and select Edit Settings. The edit system settings screen appears Step 79 Set Proxy ARP to Enabled. Step 80 Select OK.
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 23
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 81 Save the configuration in eVision by selecting File and then Save Changes from the menu bar.
Connectivity to the SNE Step 82 that the WAN cable is connected to the FSP 150CC WAN port. Step 83 Observe the WAN LED (and in the case of SONET/SDH 1+1 protection, the WAN 2 LED) on the front of each FSP 150CC. If the WAN LED(s) indicate anything other than the appropriate response for the current state, troubleshoot the WAN connections between FSP 150CC #1 and FSP 150CC #2 as necessary (refer to the FSP 150CC Installation and Operations Manual for LED descriptions for each FSP 150CC variant). Step 84 Flush ARP cache on the PC by opening a DOS window (select Start and then Run), entering ARP -d and then selecting OK. Step 85 connectivity to FSP 150CC #2. Open an Internet Explorer web browser window and enter the IP address of FSP 150CC #2. Logon using a valid name and . Step 86 Remove any commissioning cables (Ethernet cable and/or console cable) from the FSP 150CC front connectors, as required. End of Procedure
Page 24
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Provision LAN(s) in Transparent EVC Mode This procedure can be used for provisioning one or more LAN in Transparent EVC mode using the eVision web browser. It is recommended that you pre-determine the provisioning details and ensure that they meet the FSP 150CC’s provisioning rules prior to making changes to a LAN or placing an additional LAN into service. Ensure that CIR, EIR and C-Tag/S-Tag VLAN ID-Priority tuple values will not conflict with another LAN/Flow that is in the Assigned state. Refer to Chapter 5 of the FSP 150CCf-825 Installation and Operations Manual to determine the default values, value ranges and rules for each option in the following procedure.
Procedure
Step 1
Observe the current LAN Port Mode and EVC Mode. The status will be used in the following steps. eVision
Select Configuration view Expand the System Name entity in the Menu Tree Select the LAN facility in the Menu Tree The LAN facility status window is displayed
WARNING — Changing EVC Mode on a facility will drop all traffic on the port, including Management Tunnel connectivity and Maintenance End Points. Step 2
Determine the next step. Current Status
Then
Is the current EVC Mode set to Transparent?
Go to Step 8.
Is the LAN Port Mode set to Connection-oriented and EVC Mode set to Flow VLAN?
Go to Step 6.
Is the LAN Port Mode set to Connection-less and EVC Mode set to Flow VLAN?
Continue with the next step.
Step 3
Enter a right click on the LAN facility and select CO Mode (Connection-oriented Mode). A warning screen appears, indicating selection of this option will cause a loss of all traffic
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 25
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
Step 4
TM
Optical Networking
Select OK. The EVC Mode changes to Transparent
Step 5
Go to Step 8.
Step 6
Enter a right click on the LAN facility and select CO Transparent (Connection-oriented Transparent mode). A warning screen appears, indicating selection of this option will cause a loss of all traffic
Step 7
Select OK. The EVC Mode changes to Transparent
Step 8
Right click on the LAN facility in the Menu Tree and select Edit Facility. An edit Transparent LAN facility window appears
Figure 3 Edit Transparent LAN Facility View
Page 26
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 9
Enter the LAN facility changes. eVision
Enter a Circuit Name, as required Set the istration State to Enabled For LAN-5: Select the desired Media Type Enter the desired Interface Speed Enter the Ingress CIR, EIR, CBS, EBS and Buffer Size values (See Notes 1, 2 and 3) Enable or disable Egress Rate Limiting If Egress Rate Limiting is set to enabled: Egress setting options are displayed. Enter the desired Egress CIR, EIR, CBS, EBS and Buffer Size (See Note 4) Select the desired C-Tag Control (See Note 5) If C-Tag Control is set to Push: Enter the appropriate C-Tag VLAN ID and C-Tag VLAN Priority (See Note 6 and 7) Select the desired S-Tag Control If S-Tag Control is set to Push: Enter the appropriate S-Tag VLAN ID and S-Tag VLAN Priority (See Note 6 and 7) Enable or disable Tagged Frames and Untagged Frames Select/enter other options, as required Select OK The LAN facility status window appears
Note 1: If Ingress CIR is set to 0, then an Ingress EIR value of 0 cannot be entered. If Ingress CIR is set to 0, then an Ingress EIR value of 64 Kbps or greater must be entered (if a value of 1 bps through a value less than 64 Kbps is entered, then the value will automatically be rounded up to 64 Kbps). CBS or EBS cannot be less than CIR in bytes/millisecond. EBS cannot be less than EIR in bytes/millisecond. Buffer Size cannot be less than CBS. Note 2: Where Ingress CIR + Ingress EIR = Ingress PIR (Peak Information Rate): Ingress PIR must be <= LPS* or the WAN port speed, whichever is less. Note 3: The combined Ingress CIR of all transparent service/flows plus the size of the WAN management tunnel (if present) and/or WAN EFM-OAM (if enabled) cannot exceed the speed of the WAN. (WAN management tunnel utilizes 256 Kbps. WAN EFM-OAM, if enabled, utilizes 64 Kbps. If both a WAN management tunnel is provisioned and WAN EFM-OAM is enabled, 256 Kbps is utilized.) Note 4: Egress CIR and EIR must not exceed the speed of the LAN. Note 5: If more than one LAN port is to be used in the system, Push must be selected. 80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 27
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
If C-Tag Control is set to None, only one LAN port may be used in the system. Note 6: All C-Tag and S-Tag VLAN ID-Priority tuple values must not conflict on the WAN port. (For example: A service with C-Tag PUSH 100-0, S-Tag PUSH 100-0 will conflict with another service with the same C-Tag and S-Tag. A service with C-Tag PUSH 100-0, S-Tag None will conflict with another service with C-Tag None, S-Tag PUSH 100-0. A TLS service with C-Tag PUSH 100-0, S-Tag NONE will conflict with a Flow with VLAN Member 100-0, C-Tag NONE and S-Tag NONE.) Note 7: If C-Tag or S-Tag Control is set to None, C-Tag / S-Tag VLAN ID and VLAN Priority cannot be entered. Step 10 the changes. Step 11 Observe the current LAN facility Assigned/Unassigned State: (The LAN facility should still be selected in the menu tree.) Step 12 Determine the next step. Current Status
Then
Is the current Assigned/Unassigned State set to Enabled?
Go to Step 14.
Is the current Assigned/Unassigned State set to Disabled?
Continue with the next step.
Step 13 Place the LAN facility to the Assigned state. eVision
Enter a right click on the LAN facility in the menu tree and select Assign A confirmation window appears Select OK The LAN facility status window appears and the LAN Assigned/Unassigned State is Enabled
Note: If you receive an error message indicating the CIR and/or EIR values exceed the maximum allowed, and/or the C-Tag/S-Tag VLAN ID-Priority tuple values conflict with existing ones, then one or more LAN values must be changed in order to co-exist. These changes must be made by editing the LAN(s) prior to placing this LAN to the Assigned state. Step 14 Save the configuration in eVision by selecting File and then Save Changes from the menu bar. End of Procedure
Page 28
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
Optical Networking
Fiber Service Platform 150CCf-825 (FSP 150CCf-825) FSP 150CCf-825 Release 2.1
Quick Start Guide 80000003806 Rev 1.0 December 2008
Copyright © 2001-2008 ADVA AG Optical Networking. All rights reserved. All rights reserved. Hardware and software mentioned in this document includes software developed by ADVA AG Optical Networking ("ADVA"), the Apache Software Foundation (http://www.apache.org), Teodor Danciu (http://jasperreports.sourceforge.net), and/or other open source software. Some software was created using ORBacus for Java by Object-Oriented Concepts, Inc.
Trademarks The ADVA, FSP, Etherjack and the Etherjack logo are trademarks or ed trademarks of ADVA in the United States, and/or other countries. All other company, product, or service mentioned in this document may be trademarks or service marks of ADVA or their respective owner.
Patents The content described in this document may be covered by patents or pending patent applications of ADVA. The furnishing of this document does not give you any license to these patents.
Disclaimers The content of this document could include technical inaccuracies or typographical errors, and is subject to change at any time without notice. Reliance on this content is at the relying party's sole risk and will not create any liability or obligation for ADVA. Any references in this document to non-ADVA publications and/or non-ADVA Internet sites are provided for convenience only and do not in any manner serve as an endorsement of those publications and/or Internet sites. The materials within those publications and/or Internet sites are not part of the materials for any ADVA information, product or service, and use of those publications and/or Internet sites is at your own risk.
THE CONTENT OF THIS DOCUMENT IS PROVIDED ''AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ADVA, ITS S, EMPLOYEES, OFFICERS OR ITS SUPPLIERS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS DOCUMENT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THE SAME APPLIES FOR ANY HARDWARE OR SOFTWARE COVERED BY THIS DOCUMENT, UNLESS A SIGNED AGREEMENT WITH ADVA OR THE APPLICABLE PRODUCT LIABILITY LAW EXPRESSLY STATES OTHERWISE.
ADVA AG Optical Networking Headquarters Campus Martinsried Fraunhoferstr. 9 A 82152 Martinsried/Muenchen
Phone+49(0)89-890665-848 Fax +49(0)89-890665-22848 www.advaoptical.com
TM
Optical Networking
FSP 150CCf-825 Quick Start Guide
1.1
Introduction
This document provides step by step procedures to help you locally provision the FSP 150CCf-825 Network Interface Device (NID) to a simple back-to-back configuration. When the procedures in this document have been completed, the FSP 150CCs will be provisioned from its default configuration to the following configuration (see Figure 1): • back-to-back FSP 150CCs on a desk-top (no wall or rack mounting) • FSP 150CC IP address provisioned • Minimum required system and WAN interface provisioning • New s, including new super • VLAN-based WAN management tunnel with PPP layer 2 protocol, DH disabled and RIP V2 packets enabled • Management LAN port disabled at the SNE (Subtending Network Element) • LAN port(s) configured in Transparent EVC (Ethernet Virtual Circuit) mode • SNMP provisioned to enable remote alarm monitoring Figure 1 Simple Back-to-Back Configuration ed in This Document GNE FSP 150CC #1 LAN(s)
PSU1
PSU2 Status
Management Critical
Status
Major
100 240V AC
Etherjack
2
4
RS 232
Minor Status
Access
Network
4 3 2 1
TM
LAN 1
3
SNE FSP 150CC #2
WAN Lk Rate
5
Lk Rate
FSP150CCf Lk Rate
1
PSU1
PSU2 Status
Active 2 1
Management Critical
Status
Major
100 240V AC
Etherjack
2
Minor Status
Access
Network
4 3 2 1
LAN 1
2
4
RS 232
TM
3
Lk Rate
5
Lk Rate
FSP150CCf Lk Rate
1
LAN(s)
Active 2 1
2
RIP Enabled Management Tunnel GNE = Gateway Network Element SNE = Subtending Network Element
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 1
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
All other features will utilize the system default configuration. If your desired configuration varies from this basic configuration, then provisioning is required. If this is the case, refer to the FSP 150CCf-825 Installation and Operations Manual for provisioning data and procedures. For CLI provisioning and CLI command structure information, refer to the FSP 150CCf-825 Etherjack OS (EOS) Command Line Interface Handbook.
Firmware Release Levels ed in This Release This version of the FSP 150CCf-825 Quick Start Guide is applicable to the FSP 150CCf-825 software release 2.1. This version of FSP 150CCf-825 is compatible with the nVision Network Management System software release 9.0 or greater.
Audience The reader must have sufficient knowledge of the following when using this document: • IP addressing • WAN facility provisioning requirements • LAN EVC provisioning requirements • fiber handling and cleaning procedures (if connecting fiber cables) • power handling and connection procedures (if connecting DC power)
Obtaining Technical Assistance Product Maintenance Agreements and other customer assistance agreements are available for ADVA Optical Networking AG products through your ADVA Optical Networking distribution channel. Technical is available to warranty or maintenance contract customers who need technical assistance with an ADVA Optical Networking product that is under warranty or covered by a maintenance contract. To display ADVA Optical Networking’s Technical web site that includes all information, go to ADVA Optical Networking’s home page at http://www.advaoptical.com and select the “” button. ADVA Optical Networking’s service options include: • 24 X 7 telephone • Web-based tools • On-site • Technical training, both on-site and at ADVA facilities in and the USA • Expedited repair service • Extended hardware warranty service Page 2
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
1.2
Physical Installation
The FSP 150CC installation requires that you establish WAN facility connections between your local and remote sites, or between your local site and the telco. After your end-to-end connection has been installed, you are ready to install the FSP 150CCf-825. The FSP 150CCf-825 is designed for deployment in both customer premises and CO locations. Wall mount and rack mount brackets, as well as power options, may be ordered separately. Refer to the FSP 150CCf-825 Installation and Operations Manual for power and mounting ordering options.
1.2.1 Power Options and Wiring The following provides power supply requirements as well as instructions for installing the power and cabling for the FSP 150CCf-825. Refer to the FSP 150CCf-825 Installation and Operations Manual and the following information for determining PSU and/or power adapter cabling requirements for your site.
Power Requirements The system is powered by dual AC and/or DC Power Supply Units (PSUs). PSUs can be of similar type or mixed, and are hot swapable. It can be equipped with two AC modules, two DC modules, or one of each. They are physically accessed at the front of the unit and source connections are located on the front of each PSU module. Optionally, a third possible power source, an external AC to 12 VDC power converter, may be used. The 12 VDC power converter may be used alone, or mixed with AC and/or DC power supply modules. It is physically connected at the rear of the unit. AC power converters may be ordered separately for North American and international location. If an external AC power converter and/or one PSU module fails - or its input source fails, the remaining module continues to power the system without interruption to system function. Note: The power supplies are not designed to operate in load-sharing mode.
AC Supply The system operates with an AC source fused at 15A, with the voltage range specified in ANSI specification C84.1-1989, Voltage Ratings (60 Hz) for Electric Power Systems Equipment, Range B. The FSP 150CCf-825 can tolerate any frequency within the range of 60 (+/-3) Hz for North American applications, and the range of 50 (+/-3) Hz for European applications. The maximum power consumption from the 230 VAC supply is 40W.
DC Supply The DC power connector is a 3-pin socket (Battery, Return, Frame Ground) which includes a mated connector, providing protection against improper (reversed polarity) connection at the NID. The maximum power consumption from the -48 VDC supply is 40W. External fuse rating 80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 3
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
is 5A. The FSP 150CCf-825 operates properly when supplied with minimum and maximum operating voltages for North American and International applications, as shown in Table 1-1. Table 1-1 Minimum and Maximum Operating Voltages Nominal Voltage
Minimum Maximum Minimum Maximum Operating Voltage Operating Voltage Abnormal Voltage Abnormal Voltage
-48
-40.5
-57.0
0
-60.0
-60
-50
-72
0
-75
External AC to 12 VDC Power Converter The system also provides an optional AC to 12 VDC converter input on the rear , externally fused at 15A. North American and International versions are available (see the FSP 150CCf-825 Installation and Operations Manual for converter options and part numbers).
Connect Cables and Apply Power For all FSP 150CCf-825 installations, you will need the proper PSU, power cables and/or power adapter for your site, and cabling related tools and supplies, as required by local practices. For DC powered FSP 150CCf-825 power supply units, you will need the following items for this procedure: • Screwdriver • Wire wrap tool • Wire cutters • Wire strippers • Volt meter • Fuse • Other power related tools and supplies as required by local practices For optical cabling installation, you will need the following items for this procedure: • Optical Power Meter • Fiber Cleaner • Small Form-factor Plug-ables (SFPs), as required If required, refer to the FSP 150CCf-825 Installation and Operations Manual for connector and LED descriptions when performing the following procedure. Page 4
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Procedure Mount the FSP 150CC to a Wall or Rack, as required Step 1
For desktop or communications closet installations, go to the next step. Otherwise, mount the FSP 150CCs, as required. Mounting adapters are provided for mounting to a wall, 19” rack or 23” rack. Refer to FSP 150CCf-825 Installation and Operations Manual for detailed procedures. If additional FSP 150CCs are to be stacked above each other, are installed above heat producing components, or are installed below heat sensitive components, some FSP 150CC variants require that heat deflector(s) are installed. Install air deflector(s) as described in Table 2. Table 2 Air Flow Requirements for the FSP 150CCf-825 Air Flow Requirements
Multiple units may be stacked up to 5 rows high in an environmentally controlled environment, such as a Central Office. A heat deflector should be installed between every 5 rows of FSP 150CC NIDs. If it is necessary to install 5 rows of NIDs above other heat producing components, it is recommended that a heat deflector is installed below the NIDs. If it is necessary to install heat sensitive equipment above 5 rows of NIDs, it is recommended that a heat deflector is installed above the NIDs.
Insert SFPs, Run and Connect Power Cables Step 2
Connect the ground cable, as required.
Step 3
If using optical WAN/LAN interfaces: Obtain the proper SFP (Small Form-factor Plug-able), and insert it/them into the optical port(s).
Step 4
Determine the next step. Current Status
Then
Does/will the FSP 150CCf-825 include a DC power supply unit?
Continue with the next step.
Does/will the FSP 150CCf-825 NOT include a DC power supply unit?
Go to Step 17.
DANGER — Avoid the risk of electrical shock. Follow local procedures for working with electrical power. High voltage may be present in the following tasks. Shut off the power from the power source or turn off the circuit breakers before proceeding. Use properly insulated tools when working with power connections. Do not allow any metal objects to connect across power terminals.
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 5
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 5
that the office DC power supply is set up to deliver the correct operating voltage to the FSP 150CCf-825 (between -40.5 and -72 VDC). that the correct fuse or breaker (5 A rating) is installed at the power supply source and that power is turned off. Repeat for a second DC power supply source, if present.
Step 6
Using a volt meter, measure the voltages at the source power supply terminals. that no voltage is present. Repeat for a second DC power supply source, if present.
Step 7
Run the DC power cables (shipped with the power supply unit) from the FSP 150CCf-825 to the office battery terminals. Dress the power cables. Repeat for a second DC power supply unit, if present.
Step 8
Remove the blank PSU front , then insert the DC power supply unit into the front . Repeat for a second DC power supply unit, if present. If the second PSU slot is unused, ensure that a blank PSU card is inserted into the slot. Tighten the thumb screws on both PSU slots.
Step 9
Connect the green Frame Ground wires to the Frame Ground terminal. Repeat for a second DC power supply unit, if present.
Step 10 Connect the black Office Return wires to the RTN DC power supply terminals. Repeat for a second DC power supply unit, if present. Step 11 Connect the red Office Battery wires to the BATT DC power supply terminals. Repeat for a second DC power supply unit, if present. Step 12 that all power terminal connections are tight and that no strands of wire are shorting terminals together. Repeat for a second DC power supply unit, if present. Step 13 Reconnect the office power source (reinstall fuses, reset breakers or turn on supply). Repeat for a second DC power supply unit, if present. Step 14 Use a volt meter to the A side power and ground at the power terminals. Ensure that the voltage between BATT and RTN terminals measures between -40.5 and -72 VDC. Repeat for a second DC power supply unit, if present. Step 15 Using a volt meter, measure the voltage between RTN and Frame GND terminals. that 2 VDC or less is present. Repeat for a second DC power supply unit, if present. Step 16 Connect the power cables to FSP 150CCf-825 front connectors (red wire / connector release tab oriented at the bottom). Repeat for a second DC power supply unit, if present. The power supply Status LED should illuminate green. During the power cycle, the front Status LED will illuminate red for approximately 1 minute, then will change to solid green.
Page 6
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 17 Determine the next step. Current Status
Then
Does/will the FSP 150CCf-825 include an AC power supply unit at the front ?
Continue with the next step.
Does/will the FSP 150CCf-825 NOT include an AC power supply unit at the front , but a 12 VDC rear connector power adapter will be used?
Go to Step 22.
Only DC power will be used in this installation?
Go to Step 23.
Step 18 Run the AC power cable (shipped with the FSP 150CCf-825 power supply unit) from the FSP 150CCf-825 to the AC power outlet, externally fused at 15A. Dress the power cables. Repeat for a second AC power supply unit, if present. Step 19 Remove the blank PSU front , then insert the AC power supply unit into the front . Repeat for a second AC power supply unit, if present. If the second PSU slot is unused, ensure that a blank PSU card is inserted into the slot. Tighten the thumb screws on both PSU slots. Step 20 Insert the power cable into the PSU front connector. Then insert the power cable into the AC power outlet. Repeat for a second AC power supply unit, if present. The power supply Status LED should illuminate green. If AC power is the only power source: During the power cycle, the front Status LED will illuminate red for approximately 1 minute, then will change to solid green.
Step 21 Determine the next step. Current Status
Then
Will a rear accessible 12 VDC power adapter be used?
Continue with the next step.
No rear accessible 12 VDC power adapter will be used?
Go to Step 23.
Step 22 Connect the power adaptor cable to the power connector (PWR) located at the rear , connect the power cord into the power adapter, then plug the AC adaptor to an AC (120V or 240V) wall outlet, externally fused at 15A. If this is the only power source: During the power cycle, the front Status LED will illuminate red for approximately 1 minute, then will change to solid green.
Step 23 Tie-off and secure all power cabling.
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 7
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Run and Connect Metallic Cables Step 24 Run the MGMT LAN port cable and metallic LAN port cables to the FSP 150CCf-825, as required. Temporarily secure the cables. Step 25 Connect a LAN Cable to the MGMT LAN port and connect the other end of the cable to your networking gear (PC, hub, switch, or router). From the factory, the default IP address of the FSP 150CCf-825 is: 192.168.0.2/24. Step 26 Determine the next step. Current Status
Then
Are you only installing fiber optic WAN and LAN cables, and no metallic cables are to be installed?
Go to Step 36.
Are metallic WAN or LAN cable terminations required for this FSP 150CCf-825?
Continue with the next step.
Step 27 For metallic WAN interface(s): Connect the WAN cable(s) to the designated WAN port(s) using a Cat 5 LAN cable (RJ-45 connector). Otherwise, go to the next step. Step 28 For metallic LAN interface(s): Connect the client Ethernet communications equipment (PC, hub, switch, or router) to the first designated client LAN port using a Cat 5 LAN cable (RJ-45 connector). Repeat for each additional client LAN port, as required. Otherwise, go to the next step. Step 29 Tie-off and secure all metallic cabling. Step 30 Determine the next step. Current Status
Then
Are only metallic cable terminations required for this FSP 150CCf-825 and cabling is complete?
Go to Step 36.
Are you installing any fiber optic cables?
Continue with the next step.
Run and Connect Fiber Optic Cables The following precautions should be applied when handling fiber optic cables:
DANGER — Follow local safety procedures regarding fiber optic cables. Never look at the end of a fiber optic cable. Permanent eye damage or blindness can occur. All optical connectors are shipped with protective caps. Ensure that protective caps are firmly in place before running any fiber optic cables. Page 8
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
DANGER — Never handle exposed fiber optic cables with bare hands or touch it to your body. A fiber fragment could enter the skin and be very difficult to detect and remove. CAUTION — Optical power performance is affected by dust. Clean all connectors before performing measurements. Keep the ends of the fiber optic cables covered when the cables are not in use. The need for cleaning can be minimized if covers are always used when fibers are not used. Refer to local practices for fiber handling and cleaning procedures. Clean all connectors before performing measurements. WARNING — Prevent damage to fiber optic cables. Do not bend fiber optic cables to a radius less than 50 mm. WARNING — To avoid damage to optical receivers, do not connect any fibers until instructed to do so. Always check optical levels before connecting fiber optic cables. Step 31 Run the optical fiber cables to the FSP 150CCf-825. Do not connect the cable(s) to the FSP 150CCf-825 connectors at this time. They will be connected later. Step 32 Dress all fiber optic cables. Use local practices for protecting all cables and connectors. Step 33 Test the optical cables according to local practices. Step 34 Measure the transmit and receive levels of the fiber optic cables and record them for future reference. Step 35 Connect the optical interface cables to the appropriate WAN and/or LAN SFP connectors on the front . WAN and LAN LED Indicators Step 36 Observe the client LAN LED(s) and refer to FSP 150CCf-825 Installation and Operations Manual for LED descriptions. If the LAN LED(s) indicate anything other than the appropriate response for the current state, troubleshoot as necessary. Step 37 Observe the WAN (Network) LED and refer to FSP 150CCf-825 Installation and Operations Manual for LED descriptions. If the WAN LED(s) indicate anything other than the appropriate response for the current state, troubleshoot as necessary. End of Procedure
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 9
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
1.3
TM
Optical Networking
Provision the FSP 150CC
Perform the following procedure to provision the FSP 150CC. The following procedure will be performed using the RS-232 serial console using CLI commands and ADVA Optical Networking’s eVision Web Browser Management Tool. Refer to Figure 2 for an example of the configuration ed by the following procedure. You will need the following items for this procedure: • DB-9 to RJ-45 converter (included in the FSP 150CC kit) • Category 5 LAN cable (with RJ-45 connectors) for Serial Port RS-232 connection (included in the FSP 150CC kit) • A communications program, like TeraTerm Pro Web (a free software terminal emulator for MS-Windows) or HyperTerminal (a standard Windows communications utility) • Internet Explorer 5.0 or greater Figure 2 Back-to-Back Configuration ed in the Following Procedure SNE FSP 150CC #2
GNE FSP 150CC #1 PSU1
PSU2 Status
Management Critical
Status
Major
100 240V AC
Etherjack
2
4
RS 232
Minor Status
Access
Network
4 3 2 1
TM
LAN 1
3
Lk Rate
5
Lk Rate
FSP150CCf Lk Rate
1
WAN
PSU1
PSU2 Status
Management Critical
Status
Major
Active 2 1
100 240V AC
Etherjack
Minor Status
Management Tunnel
Proxy ARP = Enabled Default Router = 192.168.2.1
MGMT LAN Port IP Address = 192.168.2.2 Subnet Mask = 255.255.255.0
VLAN Based, VLAN ID = 100 Layer 2 Protocol = PPP DH = disabled RIP V2 Packets = enabled
4
Access
Network
4 3 2 1
LAN 1
2
System
2
RS 232
TM
3
Lk Rate
5
Lk Rate
FSP150CCf Lk Rate
1
Active 2 1
2
System Proxy ARP = Disabled Default Router = None
MGMT LAN Port IP Address = 192.168.2.3 Subnet Mask = 255.255.255.0
Static Route Interface = WAN IP Address = 0.0.0.0 Subnet Mask = 0.0.0.0
eVision Workstation IP Address = 192.168.2.5 Subnet Mask = 255.255.255.0 Default Gateway = 192.168.2.1
Page 10
GNE = Gateway Network Element SNE = Subtending Network Element
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Procedure Perform the following steps at FSP 150CC #2 (SNE): Set the FSP 150CC’s IP Address Step 1
Connect the console cable between the FSP 150CC RS-232 Serial Console Port and a PC using the RJ-45 cable and the DB-9 converter.
Step 2
From the PC, start a communications utility application (such as TeraTerm Pro Web or HyperTerminal) with the following COM port settings: Note: The Serial Console Port s only 9600 baud. Do not use Autobaud. Table 1-1 COM Port Settings PARAMETER
SETTING
Rate
9600 baud
Data Bits
8
Stop Bits
1
Parity
No
Flow Control
None
Step 3
Hit the “Enter” key and you will be prompted to enter a and . The default and are ‘root’ and ‘ChgMeNOW,’ respectively. A warning banner displays and the is prompted to reply [Y|N]. Enter “y” and the serial console CLI prompt (-->) is displayed.
Step 4
Enter the show mgmttnl e1000-wan-1 command followed by a carriage return to view the current WAN DH setting. See the following example:
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 11
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
--> show mgmttnl e1000-wan-1 Management Tunnel: e1000-wan-1 Tunnel Mode: None Encapsulation: Ethernet Tunnel VLAN ID: 4095 Tunnel S-Tag: Disabled Tunnel S-Tag VLAN ID: 4095 IP Address: 0.0.0.0 Subnet Mask: 255.255.255.0 MAC Address: 00:0B:90:00:47:81 DH: Enabled RIPv2: Disabled ACL Inbound Filtering: Disabled
Step 5
Observe the DH setting to determine the next step. Current Status
Then
Is the WAN port DH status set to the desired state of Disabled?
Go to Step 9.
Does the WAN port DH setting need to be changed?
Continue with the next step.
Step 6
Use the configure mgmttnl e1000-wan-1 command followed by a carriage return. A next level prompt will appear. Then enter dh disable followed by a carriage return. For example: --> configure mgmttnl e1000-wan-1 config:mgmttnl(e1000)--> dh disable config:mgmttnl(e1000)-->
Step 7
Enter show this followed by a carriage return to the changes.
Step 8
Enter exit to go back one level.
Step 9
Enter the IP address and subnet mask, by entering configure system followed by a carriage return. A next level prompt will appear. Then enter ip-address <subnet mask>. --> configure system config:sys --> ip-address 192.168.2.3 255.255.255.0 config:sys -->
Page 12
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 10 the changes by entering show ip followed by a carriage return. The Management LAN port IP information displays: config:sys --> show ip System IP Information: IP Address: Subnet Mask:
192.168.2.3 255.255.255.0
Default Gateway:
WARNING — Do not remove power while performing the next step. Removing power while the operation in progress may corrupt the database. Step 11 Enter database save followed by a carriage return. The system will display a warning message and when complete, the CLI prompt will appear, as shown below: config:sys --> database save Saving configuration. Do not power down the system. config:sys -->
Step 12 Enter followed by a carriage return. The prompt will appear
Step 13 Remove commissioning cables from the RS-232 port and the PC. Establish Communications via eVision the local Management LAN port communication settings by accessing the FSP 150CC’s eVision Web Browser Management Tool. Perform the following steps: Step 14 Change your PC IP address to successfully access the FSP 150CC’s Management LAN port IP address. Step 15 Use an Ethernet Category 5 LAN cable to connect your PC to the FSP 150CC Management LAN port. Refer to the FSP 150CCf-825 Installation and Operations Manual for the Management LAN port connector location, if required. Step 16 Activate an Internet Explorer web browser on your PC by double clicking on the shortcut icon. Step 17 Enter the FSP 150CC’s Management LAN port IP address in the web browser address field and enter return. A security alert window will appear 80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 13
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 18 that the security certificate is valid. Select Yes to proceed. The FSP 150CC window appears
Step 19 Enter the default ID root and ChgMeNOW.
Page 14
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 20 Select . The default security banner displays as shown in the following example
Note: If a error appears, re-enter the ID and . Up to 3 attempts will be processed. On a failed third attempt, the web browser will redirect to a 401 error page (Unauthorized error). If this occurs, the process must be re-started by going back to the web browser home page and re-entering the FSP 150CC IP address (at Step 17).
Step 21 Select Continue. The eVision Web Browser Management Tool will display, as shown in the following example (see the following eVision Web Browser Management Tool components)
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 15
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Title Bar
Name
Tool Bar
Menu Bar
System Name Menu Tree View Tabs Entity View Area
Status Bar
Alarms Window
Secure Session Indicator
Provision the WAN Interface Step 22 Expand nested items in the System Name entity by selecting the “+” next to the System Name entity in the menu tree (default is FSP150CCf-825). Step 23 Enter a right mouse click on the WAN entity. A drop down menu displays
Page 16
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 24 Select Edit Facility. The Edit Facility view displays
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 17
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 25 Use the following WAN interface options (as applicable) to provision the WAN interface with the minimal WAN interface provisioning options required prior to setting up WAN port communications (see Chapter 5 of the FSP 150CCf-825 Installation and Operations Manual for WAN interface configuration options and rules): Table 1-2 Minimum WAN Interface Provisioning via CLI Commands Command
Description
WAN Port state
Defines the WAN facility istrative state.
media
Defines the WAN interface media type.
speed
Defines the line rate of the Ethernet port and whether it is in half duplex or full duplex mode.
Step 26 Select OK. The WAN Facility view displays the changes made
Step 27 WAN changes made. Edit WAN Management Tunnel Step 28 Right-click on MGMT Tunnel [WAN] and select Edit Mgmt Tunnel. The Management Tunnel view displays
Page 18
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 29 Set Tunnel Mode to VLAN Based. Step 30 Set Layer 2 Protocol to PPP. Step 31 Enter the VLAN ID. (Default is 4095. The same VLAN ID number must be used for both FSP 150CCs.) Step 32 Set the DH setting to Disabled. Step 33 Set the ACL InBound Filtering setting to Disabled. Step 34 Set the RIP setting to Enable. Step 35 Select OK. Step 36 the WAN management tunnel settings. Step 37 Select File and then Save Changes from the menu bar to save the configuration.
WARNING — Do not remove power while performing the next step. Removing power while the operation in progress may corrupt the database. Step 38 Select OK. Create New Super and Delete Default Super , if Required Step 39 If a new Super is not required and the default Super is sufficient at this time, go to Step 53. Otherwise continue with the next step to create a new Super and delete the default Super . Step 40 Expand nested items in the istration entity by selecting the “+” next to the istration entity in the menu tree. Step 41 Right click on s and select Create New . A Create New window displays in the view area Step 42 Complete the following fields: • ID - The ID (UID) is a unique, non confidential name to identify each authorized NE . Enter a new name, which contains 6 to 10 alphanumeric characters. • - Enter the ID (PID), which contains between 6 and 10 characters. The PID must contain at least two non-alpha characters and one special character. Special characters include *, # and %. • Confirm - Re-enter the ID. • Privilege - Select the desired access security level (select Super to create a new Super ). • GUI Timeout Value - Enter a timeout value of 0 (to disable ) to 99 (minutes). Default is 30 (minutes). • Comment - Enter a comment, if desired. 80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 19
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 43 Select OK. The new information is displayed in the s view Step 44 Expand the s tree. The new is listed Step 45 Select the new name and view the new information to new entry. (The new is not displayed for security reasons.) Step 46 Activate a new Internet Explorer web browser window on your PC by double clicking on the shortcut icon. Step 47 Enter the FSP 150CC’s Management LAN port IP address in the web browser address field and enter return. The Screen will appear Step 48 Enter the new Super ’s name and and select OK. The eVision Web Browser Management Tool displays Step 49 Expand the System Name, istration and s entities by selecting the “+” next to each entity. Step 50 Enter a right click on the root and select Delete . Then select OK. The default root is removed from the menu tree Step 51 If desired, enter other s by repeating Step 41 through Step 45. Provision SNMP, if Required Step 52 If SNMP provisioning is not required, go to Step 59. Otherwise continue with the next step to provision SNMP. Step 53 Right click on the SNMP entity in the menu tree and select Add Community. The add community screen appears Step 54 Enter the desired Community Name, select the desired Access Type and then select Add. The new community information is displayed Step 55 Right click on the SNMP entity in the menu tree and select Add Target Address. The add target address screen appears Step 56 Select the desired Security Model and Credentials. Enter the desired IP Address and port. Then select Add. Step 57 Select the Target Addresses tab to the entry. Step 58 Repeat Step 53 through Step 57 as required.
Page 20
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Create Static Route (SNE only) Step 59 Right click on the Communications entity in the menu tree and select Create Static Route. The create static route screen appears
Step 60 For Route Type, select Interface, and for Interface, select Wan. Step 61 For IP Address, enter 0.0.0.0. Step 62 For IP Mask, enter 0.0.0.0. Step 63 Select OK. The Static Route entry displays in the Static Routes tab
Provision LAN(s) Step 64 Provision the LAN(s) by performing the procedure in Provision LAN(s) in Transparent EVC Mode, on Page 25.
Disable Local Management Port (SNE only) Step 65 Right click on the Local Management Port and select Edit Facility. The edit Local Management Port screen appears
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 21
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 66 Set the istration State to Disabled. Step 67 Select OK (communications will be dropped and the configuration will need to be saved using CLI, as described in the following steps). Note: The browser will appear to stay busy after OK is selected because it is attempting to reach the IP address of the FSP 150CC who’s Local Management Port has just been disabled. Step 68 Install the console cable between the FSP 150CC RS-232 Port and a PC using the RJ-45 cable and the DB-9 converter. Step 69 From the PC, start a communications utility application, such as HyperTerminal with the following COM port settings: Note: The Serial Console Port s only 9600 baud. Do not use Autobaud. COMM Port Parameter
COMM Port Setting
Rate
9600 baud
Data Bits
8
Stop Bits
1
Parity
No
Flow Control
None
Step 70 Hit the “Enter” key and you will be prompted to enter a and . The default and are ‘root’ and ‘ChgMeNOW,’ respectively. A warning banner displays and the is prompted to reply [Y|N]. Enter “y” and the serial console CLI prompt (-->) is displayed. Step 71 Enter show interface mgmt-lan followed by a carriage return. The DH setting will display, as shown below. that the istration State is set to Disabled. --> show interface mgmt-lan Management Interface:
mgmt-lan
istrative State:
Disabled
Operational State:
Disabled
MAC Address: MTU:
1500
Interface Speed:
Auto
Negotiated Speed:
Page 22
00:0B:90:00:08:31
100 Mb Full Duplex
DH:
Disabled
RIPv2:
Disabled
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
WARNING — Do not remove power while performing the next step. Removing power while the operation in progress may corrupt the database. Step 72 Enter database save followed by a carriage return. The system will display a warning message and when complete, the CLI prompt will appear, as shown below: --> database save Saving configuration. Do not power down the system. -->
Step 73 Enter followed by a carriage return. The prompt will appear Step 74 Remove any commissioning cables (Ethernet cable and/or console cable) from the FSP 150CC front connectors, as required. Step 75 that the WAN cable is connected to the FSP 150CC WAN port.
Perform the following at FSP 150CC #1 (GNE): Provision the FSP 150CC’s IP Address, WAN Interface, WAN Management Tunnel, New Super and SNMP Step 76 Perform Step 1 through Step 58. Provision LAN(s) Step 77 Provision the LAN(s) by performing the procedure in Provision LAN(s) in Transparent EVC Mode, on Page 25. Enable Proxy ARP at the GNE
CAUTION — Do not enable Proxy ARP if both units are connected to the same LAN via the Management LAN port. Otherwise, there will be multiple ARP responses for a single ARP request for a remote reachable IP address from each NE/FSP 150CC in the same LAN that has Proxy ARP enabled. Step 78 Right-click on the System Name and select Edit Settings. The edit system settings screen appears Step 79 Set Proxy ARP to Enabled. Step 80 Select OK.
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 23
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 81 Save the configuration in eVision by selecting File and then Save Changes from the menu bar.
Connectivity to the SNE Step 82 that the WAN cable is connected to the FSP 150CC WAN port. Step 83 Observe the WAN LED (and in the case of SONET/SDH 1+1 protection, the WAN 2 LED) on the front of each FSP 150CC. If the WAN LED(s) indicate anything other than the appropriate response for the current state, troubleshoot the WAN connections between FSP 150CC #1 and FSP 150CC #2 as necessary (refer to the FSP 150CC Installation and Operations Manual for LED descriptions for each FSP 150CC variant). Step 84 Flush ARP cache on the PC by opening a DOS window (select Start and then Run), entering ARP -d and then selecting OK. Step 85 connectivity to FSP 150CC #2. Open an Internet Explorer web browser window and enter the IP address of FSP 150CC #2. Logon using a valid name and . Step 86 Remove any commissioning cables (Ethernet cable and/or console cable) from the FSP 150CC front connectors, as required. End of Procedure
Page 24
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Provision LAN(s) in Transparent EVC Mode This procedure can be used for provisioning one or more LAN in Transparent EVC mode using the eVision web browser. It is recommended that you pre-determine the provisioning details and ensure that they meet the FSP 150CC’s provisioning rules prior to making changes to a LAN or placing an additional LAN into service. Ensure that CIR, EIR and C-Tag/S-Tag VLAN ID-Priority tuple values will not conflict with another LAN/Flow that is in the Assigned state. Refer to Chapter 5 of the FSP 150CCf-825 Installation and Operations Manual to determine the default values, value ranges and rules for each option in the following procedure.
Procedure
Step 1
Observe the current LAN Port Mode and EVC Mode. The status will be used in the following steps. eVision
Select Configuration view Expand the System Name entity in the Menu Tree Select the LAN facility in the Menu Tree The LAN facility status window is displayed
WARNING — Changing EVC Mode on a facility will drop all traffic on the port, including Management Tunnel connectivity and Maintenance End Points. Step 2
Determine the next step. Current Status
Then
Is the current EVC Mode set to Transparent?
Go to Step 8.
Is the LAN Port Mode set to Connection-oriented and EVC Mode set to Flow VLAN?
Go to Step 6.
Is the LAN Port Mode set to Connection-less and EVC Mode set to Flow VLAN?
Continue with the next step.
Step 3
Enter a right click on the LAN facility and select CO Mode (Connection-oriented Mode). A warning screen appears, indicating selection of this option will cause a loss of all traffic
80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 25
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
Step 4
TM
Optical Networking
Select OK. The EVC Mode changes to Transparent
Step 5
Go to Step 8.
Step 6
Enter a right click on the LAN facility and select CO Transparent (Connection-oriented Transparent mode). A warning screen appears, indicating selection of this option will cause a loss of all traffic
Step 7
Select OK. The EVC Mode changes to Transparent
Step 8
Right click on the LAN facility in the Menu Tree and select Edit Facility. An edit Transparent LAN facility window appears
Figure 3 Edit Transparent LAN Facility View
Page 26
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
Step 9
Enter the LAN facility changes. eVision
Enter a Circuit Name, as required Set the istration State to Enabled For LAN-5: Select the desired Media Type Enter the desired Interface Speed Enter the Ingress CIR, EIR, CBS, EBS and Buffer Size values (See Notes 1, 2 and 3) Enable or disable Egress Rate Limiting If Egress Rate Limiting is set to enabled: Egress setting options are displayed. Enter the desired Egress CIR, EIR, CBS, EBS and Buffer Size (See Note 4) Select the desired C-Tag Control (See Note 5) If C-Tag Control is set to Push: Enter the appropriate C-Tag VLAN ID and C-Tag VLAN Priority (See Note 6 and 7) Select the desired S-Tag Control If S-Tag Control is set to Push: Enter the appropriate S-Tag VLAN ID and S-Tag VLAN Priority (See Note 6 and 7) Enable or disable Tagged Frames and Untagged Frames Select/enter other options, as required Select OK The LAN facility status window appears
Note 1: If Ingress CIR is set to 0, then an Ingress EIR value of 0 cannot be entered. If Ingress CIR is set to 0, then an Ingress EIR value of 64 Kbps or greater must be entered (if a value of 1 bps through a value less than 64 Kbps is entered, then the value will automatically be rounded up to 64 Kbps). CBS or EBS cannot be less than CIR in bytes/millisecond. EBS cannot be less than EIR in bytes/millisecond. Buffer Size cannot be less than CBS. Note 2: Where Ingress CIR + Ingress EIR = Ingress PIR (Peak Information Rate): Ingress PIR must be <= LPS* or the WAN port speed, whichever is less. Note 3: The combined Ingress CIR of all transparent service/flows plus the size of the WAN management tunnel (if present) and/or WAN EFM-OAM (if enabled) cannot exceed the speed of the WAN. (WAN management tunnel utilizes 256 Kbps. WAN EFM-OAM, if enabled, utilizes 64 Kbps. If both a WAN management tunnel is provisioned and WAN EFM-OAM is enabled, 256 Kbps is utilized.) Note 4: Egress CIR and EIR must not exceed the speed of the LAN. Note 5: If more than one LAN port is to be used in the system, Push must be selected. 80000003806 Rev 1.0
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
Page 27
FSP 150CCf-825 Quick Start Guide Release 2.1 December 2008
TM
Optical Networking
If C-Tag Control is set to None, only one LAN port may be used in the system. Note 6: All C-Tag and S-Tag VLAN ID-Priority tuple values must not conflict on the WAN port. (For example: A service with C-Tag PUSH 100-0, S-Tag PUSH 100-0 will conflict with another service with the same C-Tag and S-Tag. A service with C-Tag PUSH 100-0, S-Tag None will conflict with another service with C-Tag None, S-Tag PUSH 100-0. A TLS service with C-Tag PUSH 100-0, S-Tag NONE will conflict with a Flow with VLAN Member 100-0, C-Tag NONE and S-Tag NONE.) Note 7: If C-Tag or S-Tag Control is set to None, C-Tag / S-Tag VLAN ID and VLAN Priority cannot be entered. Step 10 the changes. Step 11 Observe the current LAN facility Assigned/Unassigned State: (The LAN facility should still be selected in the menu tree.) Step 12 Determine the next step. Current Status
Then
Is the current Assigned/Unassigned State set to Enabled?
Go to Step 14.
Is the current Assigned/Unassigned State set to Disabled?
Continue with the next step.
Step 13 Place the LAN facility to the Assigned state. eVision
Enter a right click on the LAN facility in the menu tree and select Assign A confirmation window appears Select OK The LAN facility status window appears and the LAN Assigned/Unassigned State is Enabled
Note: If you receive an error message indicating the CIR and/or EIR values exceed the maximum allowed, and/or the C-Tag/S-Tag VLAN ID-Priority tuple values conflict with existing ones, then one or more LAN values must be changed in order to co-exist. These changes must be made by editing the LAN(s) prior to placing this LAN to the Assigned state. Step 14 Save the configuration in eVision by selecting File and then Save Changes from the menu bar. End of Procedure
Page 28
Copyright © 2008 ADVA Optical Networking - CONFIDENTIAL
80000003806 Rev 1.0
Related Documents 3m3m1z
Manual Adva Fsp 150cc-825 63p6t
November 2019 37
Adva Fsp 3000 Cloudconnect.pdf 2t192t
July 2021 0
Adva Fsp 3000 Data Sheet.pdf 4x5n32
January 2022 0
Adva Fsp 150cc-ge201 Data Sheet 5k3w5r
November 2021 0
Adva Manual 6k63
December 2019 34