Nema-c78.376 m2z4b

http//:www.wangd.com 最专业的电气网站

ANSI C78.376-2001 (revision of ANSI C78.376-1996

h e r i c a n National Standard for electric lampsSpecifications for the Fluorescent Lamps ---

-

- - - Reproduced GLOBAL & -EN61NEERlHG DOCUMENIS f With lhe Parnitsion Of -s

'5.

By

Under Roy*

NEMA Agreement


I

ANSI C78.376-2001 Revision of ANSI C78.376-1996

American National Standard

I Approved February 1,2001

Secretariat: American National Standards Lighting Group - NEMA

for electric lamps:

Specifications for the Chromaticity of Fluorescent Lamps

An American National Standard implies a consensus of those substantially concerned with its scope and provisions. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. s are cautioned to obtain the latest editions. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute.

Copyright O 2001 by ANSLG - National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209

1

ANSI C78.376-2001 http//:www.wangd.com Revision of ANSI C78.376-1996

American National Standard

最专业的电气网站

Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. An American National Standard implies a consensus of those substantially concerned with its scope and provisions. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The existence of an American National Standard does not in any respect preclude anyone, whether s/he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the Committee Secretariat referred to on the title page. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute.

,Printedand distributed by: Information Handling Services/Global Engineering Documents 15 Inverness Way East, Englewood, CO 80112-5776 Under Contract with National Electrical Manufacturers Association Copyright 02001 by American National Standard Lighting Group In Affiliation with National Electrical Manufacturers Association ,All rights reserved. INo part of this publication may be reproduced in any form, iin an electronic retrieval system or otherwise, without Iprior written permission of the publisher. IPrinted in the United States of America

li¡ (CopyrightO 2001 by ANSLG -- National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209

C78.376-2001 http//:www.wangd.com 最专业的电气网站 Revision of ANSI ANSI C78.376-1996

CONTENTS Foreword .......................................................................................................

v

1.

Scope ...........................................................................................................

1

2.

Color specification basis ...............................................................................

1

3.

Nominal color temperature ...........................................................................

1

4.

Objective chromaticities ............................................................................... Table I- Objective chromaticities................................................................

1 2

5.

Chromaticity tolerances ................................................................................ Table 2 - Data for construction of ellipses ...................................................

2 2

6.

Color rendering index ...................................................................................

3

7.

Figure 1 - 2700K chromaticity limits.............................................................

5

8.

Figure 2

- 3000Wwarm chromaticity ............................................................

7

9.

Figure 3 - 3500Wwhite chromaticity limits ...................................................

9

1O . Figure 4 .4000W41OOWcool white chromaticity ......................................

11

5000K chromaticity limits........................................................... II. Figure 5 .

13

6500Wdaylight chromaticity limits ............................................. 12. Figure 6 .

15

iii Copyright O 2001 by ANSLG . National Electrical Manufacturers Association 1300 North 17th Street. Suite 1847. Rosslyn. VA 22209


ANSI C78.376-2001 Revision of C78.376-1996

THIS PAGE INTENTIONALLY LEFT BLANK

iv Copyright O 2001 by American National Lighting Group/National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209

http//:www.wangd.com 最专业的电气网站 Foreword

ANSI C78.376-2001

Revision of C78.376-1996

(This Foreword is not part of ANSI C78.376-2001.)

Suggestions for improvement of this standard should be submitted to the Secretariat C78, American National Standards Lighting Group of the National Electrical Manufacturers Association, 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209. This standard was processed and approved by Accredited Standards Committee on Electric Lamps, C78, and its Subcommittee, C78-2. Committee approval of the standard does not necessarily imply that all committee voted for that approval. At the time it approved this standard, the C78 Committee had the following : Al Rousseau, Chair C78 David T. Mullen and AI Rousseau, Technical Coordinators Randolph N. Roy, Secretariat Matt Clark, Coordinating Editor Organization Represented:

Name of Representative:

Advance Transformer Company ENTERGY Services, Inc. GE Lighting Illuminating Engineering Society InterTek Testing Services, Inc. MagneTek Lighting Products National Electrical Manufacturers Association

Norman Grimshaw William “Al” Maguire Rolf Bergman Rita Harrold Craig Davenport Michael A. Stein

OSRAM SYLVANIA

Peter Bleasby David Mullen (Alt.) AI Rousseau David Belt

Philips Lighting Company Underwriters Laboratories, Inc.

--

(Vacant)

Copyright O 2001 by ANSLG National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209

ANSI C78.376-2001 http//:www.wangd.com Revision of ANSI C78.376-1996

最专业的电气网站

At the time it approved this standard, the C78-2 Sub-Committee had the following : David T. Muilen, Chair, C78-2 Randolph N. Roy, Secretariat Organization Represented:

Name of Representative:

Advance Transformer Company

Norman Grimshaw Beth Jug Dail Swanson Craig Davenport Edward E. Hammer Rolf Bergman (Alt) William Dunham (Alt) Kenneth J. Denton (Alt) Bill Brosius Howard Wolfman David T. Mullen Tom Gavenonis (Alt) Frank M. Latassa Thomas O. Leyh Greg Steinman David Belt John Marshall (Alt)

AROMAT-NAIS IETLAntertek Testing Services, Inc. General Electric MagneTek Motorola Lighting, Inc. OSRAM SYLVANIA INC. IPhilips Lighting Company 'Thomas & Betts (American Electric) Underwriters Laboratories, Inc.

vi Copyright O 2001 by ANSLG -- National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209

http//:www.wangd.com 最专业的电气网站 AMERICAN NATIONAL STANDARD for electric lamps -

Specifications for the Chromaticity of Fluorescent Lamps 1. Scope This standard covers the objectives and tolerances for the chromaticity of T8, TIO and T I 2 fluorescent lamps with a nominal loading of from 5 to 10 watts per foot at their normal 100 hour rating point. This standard also covers some compact lamps, where noted. The colors included are 2700K, 3000Wwarm white, 3500Wwhite, 4000W41OOWcool white, 5000K, and 6500Wdaylight. The lamp under test shall be operated under reference conditions as specified in ANSI C78.375 Guide for Operation of Fluorescent Lamps and in the relevant C78 lamp standard. 2.

Color specification basis

The x and y coordinates used in this specification are based on the 1931 CIE* Chromaticity Diagram. Lamps shall be rated in of the measurements standards established by the National Institute of Standards and Technology. Tolerances are based on the ellipses defined by David L. MacAdam in his paper “Specification of Small Chromaticity Differences” printed in Journal of the Optical Society of America, vol 33, no.1, Jan 1943, pp 18-26.

* International Committee on Illumination 3.

Nominal color temperature

Values of correlated color temperature (CCT) will vary within a chromaticity tolerance ellipse since they are a function of color coordinates. For colors which are designated by nominal color temperature, the value shall be based on the CCT of the objective chromaticity. For new colors, the nominal value of the color temperature shall differ from the CCT of the objective chromaticity by less than 100K. For a color with a nominal color temperature generally established prior to this standard, the value may be retained when it differs from the CCT of the objective chromaticity by a slightly greater amount. 4.

Objective chromaticities

The objective chromaticities are shown in Table I.

Copyright O 2001 by ANSLG -- National Electrical Manufacturers Association 1300 North 17th Street, Suite 2847, Rossiyn,VA 22209

1



-

Table 1 Objective chromaticities X

Y

2709K (Note I)

0.459

0.412

3 0 0 0 W a r m white

0.440

0.403

3500White

0.41 1

0.393

41OOW4OOOWCool white

0.380

0.380

50i30K

0.346

0.359

6500WDaylight

0.313

0.337

__I

12_0nly for T4 compact lames of less than 20 watts.

5.

Chromaticity tolerances

For the lamps covered by this standard the chromaticity tolerance is defined by a 4 step MacAdam ellipse. The ellipses are shown in figures 1 through 6.

In the construction of these ellipses the data shown in Table 2 are used. The values of gil, Zg,;!, and g22are taken from MacAdam's paper referred to above. They are the basis for calculating è, a, and b. è is the angle between the major axis of the ellipse and the x axis. a and b are major and minor semi-axis of a one step ellipse, respectively.

-

Table 2 Data for Construction of Ellipses g11

2700K (Note 1)

3000WWarm white 3 5 0 0 W h i te 4000W41OOWCool white 5000K 6500K/DayIight

2g12

io4 39 x i o 4 -39 x i o 4 38 x I O 4 -40 x io4 39.5 x i o 4 -43 x i o 4 56 x I O 4 -50x i o 4 -80x i o 4 86 x IO4 40 x I O 4

-39 x

a

b

53' 42'

0.0027

0.0014

53' 13'

0.00278

0.00136

25 x I O 4

54O 00'

0.00309

0.00138

26 x I O 4

53O 43'

0.00313

0.00134

io4

59O 37'

0.00274

0.001118

45 x I O 4

58' 34'

0.00223

0.00095

28 x I O 4 27.5 x

28 x

Jl For compact fluorescent lamps of less than 20 watts. -

2

e

Q22

Copyright O 2001 by ANSLG -- National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209

io4

I


6.

ANSI C78.376-2001

Revision of ANSI C78.376-1996

Cotor Renderinq Index (Rd

6.1 Definition Color rendering index or CRI is the measurement of degree of color shift objects undergo when illuminated by a reference source of comparable color temperature. It is abbreviated Ra6.2 Measurement The value for CRI for a QivenIgmp shall be determined in accordance with the method specified in CIE Publication 13.3. The required spectroradiometric measurement and characterization shall be conducted in accordance with methods given in IESNA LM-58 and IESNA LM-16 For compliance with federal requlations see IOCFR 430.24. 6.3 Specification The initial reading of the Color Renderinq Index. Ra, of a test lot shall not be less than the rated value decreased by three.

3 Copyright O 2001 by ANSLG -- National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209


THIS PAGE INTENTIONALLY

LEFT BLANK





0.425

0.42

0.41 5 Y

0.41

0.405

0.4 0.445

0.45

0.455

0.46

0.465

0.47

X

Figure 1 - 2700K Chromaticity Limits (4 MacAdam Color Steps)

5 Copyright O 2001 by ANSLG - National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209



6 Copyright O 2001 by ANSLG -- National Electrical Manufacturers Association 'i300 North 17th Street, Suite 1847, Rosslyn, VA 22209




.425 .420 .415 .410 y

.405 .400

.395

.390 .385 425

.430

.435

,440

.445

.450

.455

X

Figure 2 - 3 0 0 0 W a r m White Chromaticity Limits (4 MacAdam Color Steps)

7 Copyright O 2001 by ANSLG -- National ElectricalManufacturersAssociation 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209



'6

--





.415 .410 .405 .400 y

.395 .390 .385 .380 ,375 .395

,400

.405

.41O

.415

,420 .425

X

Figure 3 - 3500WWhite Chromaticity Limits (4 MacAdam Color Steps)

-

Copyright O 2001 by ANSLG National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rossiyn, VA 22209

9


THIS PAGE INTENTIONALLY

LEFT BLANK

10 Copyright O 2001 by ANSLG -- National Electrical ManufacturersAssociation 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209




.395

.390

,385

Y

.380

.375

.370

.365 .365

,370

.375

.380

.385

.390

.395

X

Figure 4 - 4000K/4100K/Cool White Chromaticity Limits (4 MacAdam Color Steps)

-


11


'THIS PAGE INTENTIONALLY LEFT BLANK

12 Copyright O 2001 by ANSLG -- National Electrical ManufacturersAssociation 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209




.375 ,370 .365 .360 Y

.355 .350 .345 .340 .335 .330

,335

.340

.345

.350

,355

.3óû

X

Figure 5 - 5000K Chromaticity Limits (4 MacAdam Color Steps)

13 Copyright O 2001 by ANSLG - National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209







.355 .350 .345 .340 Y

.335 .330 .325 .320 .315 295

.300

.305 .31 O

.3 1 5

.320

.325

X

Figure 6 - 6500WDaylight Chromaticity Limits (4 MacAdam Color Steps)

-

Copyright O 2001 by ANSLG National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rocslyn, VA 22209

15



16 Copyright Q 2001 by ANSLG -- National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209

ANSI C78.376-2001 Revision of ANSI 678.376-1996

Nema-c78.376 m2z4b

Overview 3e4r5l

More details w3441

More Documents from "Gabriel Duarte" 3g1411

6l6m1j

New Techniques For Bass Clarinet - Henri Bok 4y1b52

Nema-c78.376 m2z4b

Tema 1 Ejercicios Resueltos De Energia Potencial Y Cinetica w2f6p

Hollywood Board 3n663r

El Pinguino Adivino 135t2j