Novitherm Heat Reflector s i5cy
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Novitherm Heat Reflector s as PDF for free.
More details w3441
- Words: 816
- Pages: 2
™
NOVITHERM
Boost your heating system’s effectiveness Low Cost Fast Payback
Easy to install Easy to Use
The Novitherm™ Reflector s yield instant results.
The aluminized surface reflects over 90% of the infra-red heat, normally absorbed by the wall behind the heating units, back into the room. This immediately improves comfort levels and reduces your heating requirements by at least ten percent.*
How do the Reflector s work? • The metallic surface on the reflector reflects heat back into the room. This immediately improves heating efficiency. • The "pockets" on the back of the trap air, which prevents heat from escaping the outer wall.
Novitherm™ reflector s are an easy and cost effective method for reducing your heating bills by at least 10%.* The s are quickly and easily attached to the wall behind your radiators out of sight and start working immediately to reduce energy loss. The s effectively improve convection behind your radiators, accelerating the air flow and directing it away from the wall, where it is usually lost, back into the room allowing the elimination of cold spots and improving overall room comfort. They also increase return water temperatures so that the boiler fires less often and for shorter periods saving even more money and reducing carbon dioxide emissions at the same time.
• The ribbed profile increases hot air circulation thus improving the overall room comfort. • With the reflector , the core of your radiator is kept hotter - therefore returning the water inside the system to the boiler at a higher temperature. This reduces the amount of energy required to re-heat the water.
Without Heat Reflector
With Heat Reflector Reduced Reflector Heat Loss
Heat Loss
Heating Unit
Exterior Wall
Exterior Wall
Heating Unit
Designed for use with hot water or steam radiators.
Radiation heat loss reduced by 90%.
www.matrixenergy.ca
296 Labrosse Avenue, Pointe-Claire, QC, H9R 5L8, Canada Phone: (514) 630-5630 Fax: (514) 426-9123 Toll Free: 1-866-630-5630 Email: [email protected]
™
NOVITHERM
Boost your heating system’s effectiveness Novitherm™ Heat Reflectors – Technical Information
Heating System without Novitherm™ Heat Reflectors Exterior Wall
Heat Loss
The Heat Reflector is made of clear PVC with an aluminized surface. The Heat Reflector is molded and given a ribbed profile that creates an insulating space when affixed to a flat surface.
Return 140°
Supply 160° Heating Units
Boiler Room
The Heat Reflectors are strong and durable and will not be damaged by normal handling.
Typically, there is no insulation in apartment buildings built prior to 1980. Therefore, high heat loss is experienced through the exterior walls behind the heating units.
Hot Water Distribution
Sheet Size To best accommodate ease of installation and the variety of heating units, Heat Reflector sheets are 34.5" (87.6 cm) wide and come in manufactured heights of 8", 12" and 20" (20.3 cm, 30.4 cm, 50.8 cm).
Durability Except where subjected to long-term, direct exposure to ultraviolet light, the Heat Reflectors have an indefinite life span. The aluminized coating should not be exposed to water.
Heating System with Novitherm™ Heat Reflectors Reduced Heat Loss
Exterior Wall
Fire Resistance
Return 140°
The Heat Reflectors have been tested for smoke and flame spread by the Underwriters Laboratory of Canada (ULC) and rated in accordance with the following standards:
Supply 150°
Heating Units
Boiler Room
Hot Water Distribution
CAN/ULC-S102M (flame @ 30; smoke @ 60 to 85) ASTM E84 (flame @ 15 to 40; smoke @ 105 to 135)
Toxicity When tested in accordance with draft EEC Document EN71, the Heat Reflectors were found to be safe to use where they would be accessible to children.
Heat Reflectors
Once Heat Reflectors have been installed, your building will have a reduced heating requirement. We strongly recommend that either your mechanical contractor or control company make control adjustments to reduce the system water temperature by a minimum 10 ° Fahrenheit. Both should be notified of the installation of Heat Reflectors and the new control settings. If company or building personnel also adjust the boiler system controls, they too should be notified of the new lowered settings. This will help maximize your building’s comfort as well as your energy savings.
Novitherm™ Heat Reflectors - Boiler Control
Emissivity
Adhesive A double sided; pressure sensitive, acrylic tape is provided for installation. *Independent testing performed by Centre des technologies du gaz naturel (CTGN), 2004/5
180 Boiler Water Temperature °F
Heat Reflectors are opaque to thermal radiation with a thermal reflectance of 90% to 92%.
170
original heating curve
160
F
° 10
150
heating curve changed to reflect lessened heating requirement
140 130 120 110 100 70
50
30
10
0
-10
-30
-50
Outdoor Temperature °F
Once Novitherm™ Heat Reflectors have been installed, your building will have a reduced heating requirement. ÉNERGIE
MATRIX ENERGY
296 Labrosse Avenue, Pointe-Claire, QC, H9R 5L8, Canada Phone: (514) 630-5630 Fax: (514) 426-9123 Toll Free: 1-866-630-5630 email: [email protected] For more information visit www.matrixenergy.ca
NOVITHERM
Boost your heating system’s effectiveness Low Cost Fast Payback
Easy to install Easy to Use
The Novitherm™ Reflector s yield instant results.
The aluminized surface reflects over 90% of the infra-red heat, normally absorbed by the wall behind the heating units, back into the room. This immediately improves comfort levels and reduces your heating requirements by at least ten percent.*
How do the Reflector s work? • The metallic surface on the reflector reflects heat back into the room. This immediately improves heating efficiency. • The "pockets" on the back of the trap air, which prevents heat from escaping the outer wall.
Novitherm™ reflector s are an easy and cost effective method for reducing your heating bills by at least 10%.* The s are quickly and easily attached to the wall behind your radiators out of sight and start working immediately to reduce energy loss. The s effectively improve convection behind your radiators, accelerating the air flow and directing it away from the wall, where it is usually lost, back into the room allowing the elimination of cold spots and improving overall room comfort. They also increase return water temperatures so that the boiler fires less often and for shorter periods saving even more money and reducing carbon dioxide emissions at the same time.
• The ribbed profile increases hot air circulation thus improving the overall room comfort. • With the reflector , the core of your radiator is kept hotter - therefore returning the water inside the system to the boiler at a higher temperature. This reduces the amount of energy required to re-heat the water.
Without Heat Reflector
With Heat Reflector Reduced Reflector Heat Loss
Heat Loss
Heating Unit
Exterior Wall
Exterior Wall
Heating Unit
Designed for use with hot water or steam radiators.
Radiation heat loss reduced by 90%.
www.matrixenergy.ca
296 Labrosse Avenue, Pointe-Claire, QC, H9R 5L8, Canada Phone: (514) 630-5630 Fax: (514) 426-9123 Toll Free: 1-866-630-5630 Email: [email protected]
™
NOVITHERM
Boost your heating system’s effectiveness Novitherm™ Heat Reflectors – Technical Information
Heating System without Novitherm™ Heat Reflectors Exterior Wall
Heat Loss
The Heat Reflector is made of clear PVC with an aluminized surface. The Heat Reflector is molded and given a ribbed profile that creates an insulating space when affixed to a flat surface.
Return 140°
Supply 160° Heating Units
Boiler Room
The Heat Reflectors are strong and durable and will not be damaged by normal handling.
Typically, there is no insulation in apartment buildings built prior to 1980. Therefore, high heat loss is experienced through the exterior walls behind the heating units.
Hot Water Distribution
Sheet Size To best accommodate ease of installation and the variety of heating units, Heat Reflector sheets are 34.5" (87.6 cm) wide and come in manufactured heights of 8", 12" and 20" (20.3 cm, 30.4 cm, 50.8 cm).
Durability Except where subjected to long-term, direct exposure to ultraviolet light, the Heat Reflectors have an indefinite life span. The aluminized coating should not be exposed to water.
Heating System with Novitherm™ Heat Reflectors Reduced Heat Loss
Exterior Wall
Fire Resistance
Return 140°
The Heat Reflectors have been tested for smoke and flame spread by the Underwriters Laboratory of Canada (ULC) and rated in accordance with the following standards:
Supply 150°
Heating Units
Boiler Room
Hot Water Distribution
CAN/ULC-S102M (flame @ 30; smoke @ 60 to 85) ASTM E84 (flame @ 15 to 40; smoke @ 105 to 135)
Toxicity When tested in accordance with draft EEC Document EN71, the Heat Reflectors were found to be safe to use where they would be accessible to children.
Heat Reflectors
Once Heat Reflectors have been installed, your building will have a reduced heating requirement. We strongly recommend that either your mechanical contractor or control company make control adjustments to reduce the system water temperature by a minimum 10 ° Fahrenheit. Both should be notified of the installation of Heat Reflectors and the new control settings. If company or building personnel also adjust the boiler system controls, they too should be notified of the new lowered settings. This will help maximize your building’s comfort as well as your energy savings.
Novitherm™ Heat Reflectors - Boiler Control
Emissivity
Adhesive A double sided; pressure sensitive, acrylic tape is provided for installation. *Independent testing performed by Centre des technologies du gaz naturel (CTGN), 2004/5
180 Boiler Water Temperature °F
Heat Reflectors are opaque to thermal radiation with a thermal reflectance of 90% to 92%.
170
original heating curve
160
F
° 10
150
heating curve changed to reflect lessened heating requirement
140 130 120 110 100 70
50
30
10
0
-10
-30
-50
Outdoor Temperature °F
Once Novitherm™ Heat Reflectors have been installed, your building will have a reduced heating requirement. ÉNERGIE
MATRIX ENERGY
296 Labrosse Avenue, Pointe-Claire, QC, H9R 5L8, Canada Phone: (514) 630-5630 Fax: (514) 426-9123 Toll Free: 1-866-630-5630 email: [email protected] For more information visit www.matrixenergy.ca
Related Documents 3m3m1z
Novitherm Heat Reflector s i5cy
December 2019 50
Appleton Reflector 6m684w
May 2021 0
Vu s 3h4n31
November 2021 0
022814 Abilene Reflector Chronicle 191t6l
November 2019 68
Vcb s 6v2mx
October 2019 48
Cb s 3s2d2
March 2023 0More Documents from "Matrix Energy" 6q6v57
Matrixair Solar Fresh Air Heating System By Matrix Energy 1e3j57
December 2019 47
Novitherm Heat Reflector s i5cy
December 2019 50
6l6m1j
November 2019 44
Hitachi 902 Automated Analyzer - Service Manual 1h63
May 2022 0
6l6m1j
February 2021 0