Radius Gage 82471
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Radius Gage as PDF for free.
More details w3441
- Words: 588
- Pages: 3
Free Radius Gage Calibration Procedure
Page 1 of 3
sign in | | us | cart phone: 559-440-6052 site search pay your invoice or quote online
Home
Calibration Control
Get Help
Procedures
site home | calibration procedures | radius gage
http://www.apesoftware.com/calibration-procedures/radius-gage.aspx
9/7/2016
Free Radius Gage Calibration Procedure
Page 2 of 3
Radius Gage Calibration Purpose
Calibration Control
The purpose of this procedure is to provide general instructions for the calibration of radius gages.
Email: * Name: *
Scope
Company: *
The radius gages is considered an in an inherently stable device and will not require
Day Phone:
recalibration unless a special request is made by the .
Sign In & Software
Procedure The use of radius gages is a fast and easy method of checking concave or convex radii in machining, layout, pattern making, etc. for tool and die makers, machinists, layout men and other mechanics. Calibration is performed by comparing the radius gage to a radius chart on an optical comparator.
Preliminary Instructions and Notes 1. Read this entire procedure before beginning the calibration. 2. Calibration shall be performed in an environment that conforms to Manufacturer Specifications. 3. The radius gage will hereafter be referred to as the Instrument Under Test (IUT). 4. that the IUT is clean. 5. Visually examine the IUT for any condition that could cause errors in the calibration. 6. If any of the requirements cannot be met, refer to the applicable manufacturer manual. 7. If a malfunction occurs or a defect is observed while calibration is in progress, the calibration shall be discontinued and necessary corrective action taken; if corrective action affects a measurement function previously calibrated, the function shall be recalibrated before the remainder of the procedure implemented.
Reference Material Applicable Manufacturers Manual or Brochures.
Specifications The specifications of the IUT are determined by the applicable manufacturer's documentation. If the manufacturer's documentation is not available, then the specifications identified in this procedure are used. Dimensions of these instruments are in fractions or decimal inches or in millimeters. This procedure will use decimal inches for all dimensional measurement but will be applicable to all equivalent dimensions. Range
Assigned Accuracy
0.016 through 0.125 Inch
+/- 0.002 Inch
0.141 through 0.234 Inch
+/- 0.003 Inch
http://www.apesoftware.com/calibration-procedures/radius-gage.aspx
9/7/2016
Free Radius Gage Calibration Procedure
0.500 and larger
Page 3 of 3
+/- 0.004
Equipment Required The Standards listed below should be selected on the basis of their higher accuracy level when compared to the IUT. Equivalent Standards must be equal to or better than the Minimum-Use-Specification. Minimum-Use-Specifications for Standards listed are 1/4 the accuracy required by the IUT. Standards Used
Minimum-Use-Specifications
Optical Comparator
Accuracy: +/- 0.0005 Inch
W/Radius Charts
With Calibration Radius Charts
Detailed Procedure 1. Select appropriate radius chart and mount on optical comparator. 2. Mount the IUT on the worktable of comparator and align with the best-fit radius. 3. Repeat step 2 for each concave and convex radius on IUT. If IUT is one in a set of similar instruments, each IUT must be checked.
Reason for Reissue Revision A - First Release
Software
Software
Get Help
Forum
About
Us
Calibration Control
Printers
Help Pages & Videos
Forum Home
Us
Scanner
Remote
Calibration Control
Our Customers
Email Sales
Version History
Minimum Requirements
On-Site Services
Important Links
Email
Feature List
PDF Brochure
Multi- Setup
Twitter
Site Map
Desktop
Pricing
PDF Manual
Copyright © 1992 to 2016 Ape Software all rights reserved | Home |
http://www.apesoftware.com/calibration-procedures/radius-gage.aspx
Phone: 559-440-6052
9/7/2016
Page 1 of 3
sign in | | us | cart phone: 559-440-6052 site search pay your invoice or quote online
Home
Calibration Control
Get Help
Procedures
site home | calibration procedures | radius gage
http://www.apesoftware.com/calibration-procedures/radius-gage.aspx
9/7/2016
Free Radius Gage Calibration Procedure
Page 2 of 3
Radius Gage Calibration Purpose
Calibration Control
The purpose of this procedure is to provide general instructions for the calibration of radius gages.
Email: * Name: *
Scope
Company: *
The radius gages is considered an in an inherently stable device and will not require
Day Phone:
recalibration unless a special request is made by the .
Sign In & Software
Procedure The use of radius gages is a fast and easy method of checking concave or convex radii in machining, layout, pattern making, etc. for tool and die makers, machinists, layout men and other mechanics. Calibration is performed by comparing the radius gage to a radius chart on an optical comparator.
Preliminary Instructions and Notes 1. Read this entire procedure before beginning the calibration. 2. Calibration shall be performed in an environment that conforms to Manufacturer Specifications. 3. The radius gage will hereafter be referred to as the Instrument Under Test (IUT). 4. that the IUT is clean. 5. Visually examine the IUT for any condition that could cause errors in the calibration. 6. If any of the requirements cannot be met, refer to the applicable manufacturer manual. 7. If a malfunction occurs or a defect is observed while calibration is in progress, the calibration shall be discontinued and necessary corrective action taken; if corrective action affects a measurement function previously calibrated, the function shall be recalibrated before the remainder of the procedure implemented.
Reference Material Applicable Manufacturers Manual or Brochures.
Specifications The specifications of the IUT are determined by the applicable manufacturer's documentation. If the manufacturer's documentation is not available, then the specifications identified in this procedure are used. Dimensions of these instruments are in fractions or decimal inches or in millimeters. This procedure will use decimal inches for all dimensional measurement but will be applicable to all equivalent dimensions. Range
Assigned Accuracy
0.016 through 0.125 Inch
+/- 0.002 Inch
0.141 through 0.234 Inch
+/- 0.003 Inch
http://www.apesoftware.com/calibration-procedures/radius-gage.aspx
9/7/2016
Free Radius Gage Calibration Procedure
0.500 and larger
Page 3 of 3
+/- 0.004
Equipment Required The Standards listed below should be selected on the basis of their higher accuracy level when compared to the IUT. Equivalent Standards must be equal to or better than the Minimum-Use-Specification. Minimum-Use-Specifications for Standards listed are 1/4 the accuracy required by the IUT. Standards Used
Minimum-Use-Specifications
Optical Comparator
Accuracy: +/- 0.0005 Inch
W/Radius Charts
With Calibration Radius Charts
Detailed Procedure 1. Select appropriate radius chart and mount on optical comparator. 2. Mount the IUT on the worktable of comparator and align with the best-fit radius. 3. Repeat step 2 for each concave and convex radius on IUT. If IUT is one in a set of similar instruments, each IUT must be checked.
Reason for Reissue Revision A - First Release
Software
Software
Get Help
Forum
About
Us
Calibration Control
Printers
Help Pages & Videos
Forum Home
Us
Scanner
Remote
Calibration Control
Our Customers
Email Sales
Version History
Minimum Requirements
On-Site Services
Important Links
Feature List
PDF Brochure
Multi- Setup
Site Map
Desktop
Pricing
PDF Manual
Copyright © 1992 to 2016 Ape Software all rights reserved | Home |
http://www.apesoftware.com/calibration-procedures/radius-gage.aspx
Phone: 559-440-6052
9/7/2016
Related Documents 3m3m1z
Radius Gage 82471
December 2021 0
Gage Verklaring 5f4x1p
November 2019 63
Tv Radius 58u2p
August 2022 0
Radius Server.pdf 4w6ww
November 2019 49
Turning Radius 69611q
March 2021 0