Safety Briefing For Sheet Piling Works And Safe Work Procedure 1a3px
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Safety Briefing For Sheet Piling Works And Safe Work Procedure as PDF for free.
More details w3441
- Words: 689
- Pages: 7
CHYE JOO CONSTRUCTION PTE LTD
Project: Site Clearance & Earth works at BBCCK
Date: 26/04/2013 Venue: Choa Chu Kang work site Activity: Mass Tool Box & SWP Briefing
Meeting Conducted by: Antonio Sevilla (PM) / Ramesh (WSHO) / Vengadesh (Safety Supervisor) Chye Joo Constructions Pte ltd
Topics Discussed: 1. 2. 3. 4. 5. 6. 7. 8.
Safe Work procedure for Sheet Piling Work Public (Pedestrian) Safety Traffic Control (Pedestrian Walkway) Duties of Traffic Controller Traffic Signage Vehicle Movement PPE House Keeping
Page 1 of 3
CHYE JOO CONSTRUCTION PTE LTD
Page 2 of 3
CHYE JOO CONSTRUCTION PTE LTD
Prepared by: Ramesh WSHO
Page 3 of 3
CHYE JOO CONSTRUCTION PTE LTD Project: 384BBCK Process: Sheet Piling Work, Site Clearance, Earth & Drain Works at Bukit Batok and Choa Chu Kang Safe Work Procedure: 1) Clearly mark the designated work area bounded by placing barricades or fences around excavated the work area. 2) Place signs around the work area warning people not to enter the work area unless authorized to do so. 3) Wear proper PPE (Vest, helmet, safety shoe, ear plug, safety goggles, safety gloves, dust mask etc) 4) Cable detection report should be distributed to all staffs those who involved at site. 5) Authority approval (LTA, PUB, Power Grid etc) should be made before commencement of work 6) Machinery operators should be qualified. 7) Provide sufficient manpower (ie. Piling Operator, Lifting Supervisor, Rigger / Signalman, Banks man and Traffic Controller) 8) Lifting operation: a) Lifting gear, lifting appliances and lifting machines shall be tested and thoroughly examined by the manufacturer or an approved person before use.
Page 1 of 3
CHYE JOO CONSTRUCTION PTE LTD b) All lifting path and access must be leveled and well compacted and that lifting supervisor to check Piling m/c position and ensure that it is on a safe surface. c) All Lifting operations should be carried out in the presence of Rigger, Signalman/Banks man, Lifting supervisor and Traffic Controller. d) All machinery swing areas must be cordoned off and all personnel must keep a safe distance from all lifted loads. e) Ensure that all personnel to clear from lifted load and be vigilant from falling objects f) Ensure that standing s to be pushed down flat to prevent topping over during lifting or dismantle upright s before lifting. 9) Lifting operation & Sheet Piling Operation (near to Pedestrian Walkway): a) All Lifting / Piling operations should be carried out in the presence of Lifting Supervisor, Piling Operator, Rigger, Signalman/Banks man and Traffic Controller. b) All machinery swing areas must be cordoned off and all personnel must keep a safe distance from all lifted loads. c) Traffic controller to standby with some Temporary barriers like Safety cones and safety signs to alert the Pedestrians about the Lifting work. d) Temporarily Open the Hoarding sheet for the Traffic Controller to see and communicate with the Lifting team and Piling Operator.
Page 2 of 3
CHYE JOO CONSTRUCTION PTE LTD e) When pedestrian reach to the walkway which is very near to Lifting area, Traffic Controller alert the Pedestrian at the same time should communicate with the Lifting Team to hold their Lifting operation until Pedestrians by the walk way. Always give preference to Pedestrian and their safety first. Do not carry out any Lifting work during Pedestrians walking the time. Traffic controller should closely monitor and communicate with Lifting team. f) Close the Hoarding sheet when the lifting and piloting operation completed. 9) Hot work operation: a) Apply hot work permit. b) Fire extinguisher should be standby. c) Welder to do regular check up for the leakage of hose, butterfly clip, regulator, torch, gas cylinders before using. d) Keep the cylinders wrench on the cylinders valve so that cylinders could be turned off quickly if need. 10) Regular noise monitoring required. 11) Hydraulic Vibro hammer swing with long arm with sheet pile should be very careful as public and vehicles moving around the working area closely. 12) Housekeeping required daily at the end of the work. Prepared by: Ramesh / WSHO Briefed to 384BBCCK SITE TEAM on 26/04/2013
Page 3 of 3
Project: Site Clearance & Earth works at BBCCK
Date: 26/04/2013 Venue: Choa Chu Kang work site Activity: Mass Tool Box & SWP Briefing
Meeting Conducted by: Antonio Sevilla (PM) / Ramesh (WSHO) / Vengadesh (Safety Supervisor) Chye Joo Constructions Pte ltd
Topics Discussed: 1. 2. 3. 4. 5. 6. 7. 8.
Safe Work procedure for Sheet Piling Work Public (Pedestrian) Safety Traffic Control (Pedestrian Walkway) Duties of Traffic Controller Traffic Signage Vehicle Movement PPE House Keeping
Page 1 of 3
CHYE JOO CONSTRUCTION PTE LTD
Page 2 of 3
CHYE JOO CONSTRUCTION PTE LTD
Prepared by: Ramesh WSHO
Page 3 of 3
CHYE JOO CONSTRUCTION PTE LTD Project: 384BBCK Process: Sheet Piling Work, Site Clearance, Earth & Drain Works at Bukit Batok and Choa Chu Kang Safe Work Procedure: 1) Clearly mark the designated work area bounded by placing barricades or fences around excavated the work area. 2) Place signs around the work area warning people not to enter the work area unless authorized to do so. 3) Wear proper PPE (Vest, helmet, safety shoe, ear plug, safety goggles, safety gloves, dust mask etc) 4) Cable detection report should be distributed to all staffs those who involved at site. 5) Authority approval (LTA, PUB, Power Grid etc) should be made before commencement of work 6) Machinery operators should be qualified. 7) Provide sufficient manpower (ie. Piling Operator, Lifting Supervisor, Rigger / Signalman, Banks man and Traffic Controller) 8) Lifting operation: a) Lifting gear, lifting appliances and lifting machines shall be tested and thoroughly examined by the manufacturer or an approved person before use.
Page 1 of 3
CHYE JOO CONSTRUCTION PTE LTD b) All lifting path and access must be leveled and well compacted and that lifting supervisor to check Piling m/c position and ensure that it is on a safe surface. c) All Lifting operations should be carried out in the presence of Rigger, Signalman/Banks man, Lifting supervisor and Traffic Controller. d) All machinery swing areas must be cordoned off and all personnel must keep a safe distance from all lifted loads. e) Ensure that all personnel to clear from lifted load and be vigilant from falling objects f) Ensure that standing s to be pushed down flat to prevent topping over during lifting or dismantle upright s before lifting. 9) Lifting operation & Sheet Piling Operation (near to Pedestrian Walkway): a) All Lifting / Piling operations should be carried out in the presence of Lifting Supervisor, Piling Operator, Rigger, Signalman/Banks man and Traffic Controller. b) All machinery swing areas must be cordoned off and all personnel must keep a safe distance from all lifted loads. c) Traffic controller to standby with some Temporary barriers like Safety cones and safety signs to alert the Pedestrians about the Lifting work. d) Temporarily Open the Hoarding sheet for the Traffic Controller to see and communicate with the Lifting team and Piling Operator.
Page 2 of 3
CHYE JOO CONSTRUCTION PTE LTD e) When pedestrian reach to the walkway which is very near to Lifting area, Traffic Controller alert the Pedestrian at the same time should communicate with the Lifting Team to hold their Lifting operation until Pedestrians by the walk way. Always give preference to Pedestrian and their safety first. Do not carry out any Lifting work during Pedestrians walking the time. Traffic controller should closely monitor and communicate with Lifting team. f) Close the Hoarding sheet when the lifting and piloting operation completed. 9) Hot work operation: a) Apply hot work permit. b) Fire extinguisher should be standby. c) Welder to do regular check up for the leakage of hose, butterfly clip, regulator, torch, gas cylinders before using. d) Keep the cylinders wrench on the cylinders valve so that cylinders could be turned off quickly if need. 10) Regular noise monitoring required. 11) Hydraulic Vibro hammer swing with long arm with sheet pile should be very careful as public and vehicles moving around the working area closely. 12) Housekeeping required daily at the end of the work. Prepared by: Ramesh / WSHO Briefed to 384BBCCK SITE TEAM on 26/04/2013
Page 3 of 3
Related Documents 3m3m1z
Safety Briefing For Sheet Piling Works And Safe Work Procedure 1a3px
November 2019 148
Piling Procedure 485t5g
December 2019 54
Method Statement For Piling Works 5w1o6a
February 2021 0
Method Statement For Piling Works 5w1o6a
November 2019 133
Sand Blasting Cabinet Safe Work Procedure 432554
December 2019 112
Method Statement Of Sheet Piling Works 4u3k71
December 2019 66More Documents from "Min Min Soe" 5v5t5w
Safety Briefing For Sheet Piling Works And Safe Work Procedure 1a3px
November 2019 148
Betty Neuman Systems Model 596s16
November 2021 0
Oh Cho Vs Director Of Lands G 20536c
April 2020 31
A10 Thunder Series 1040_1040s_940 Installation Guide dh54
May 2021 0
Successful Business Plan 3f2u6i
November 2021 0