Security _ Webmethods Expert 4d5y45
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Security _ Webmethods Expert as PDF for free.
More details w3441
- Words: 2,141
- Pages: 9
12/6/2016
Security | Webmethods Expert
Webmethods Expert Stay Updated
Security
Building DMZ (DemilitrlalizedZone) using webMethods MAY 23, 2015 HOSSAM ELSHARKAWY LEAVE A COMMENT Offering your services through the Internet requires a special setup to secure your servers. In this tutorial we will discuss the standard setup for the DMZ (demilitarized zone) using webmethods components. This tutorial will cover the following points: The components to build Demilitrlalized‑zone. Configuring the ‘Enterprise gateway’ Configuring the ‘Internal serverʹ(internal IS) The components which will be used in building the DMZ are: Firewall: is a network component used to allow/deny the network traffic using a set of rules. WebMethods Enterprise gateway: is an integration server placed in the DMZ , it handles the communication between the external callers and the internal IS which will fulfill the request from inside the company’s network. Internal IS: is the the integration server which is the point of between the enterprise gateway in the DMZ and the internal network. https://webmethodsexpert.com/category/security/ Figure 1 : DMZ implementation
1/9
12/6/2016
Security | Webmethods Expert
Figure 1 : DMZ implementation
(h豒ps://webmethodsexpert.files.wordpress.com/2015/05/img_0010.png) As we see in figure 1: The area between the two firewalls is the DMZ (demilitarized‑zone). The servers in this area don’t include business logic or data, and have access to the internal server(internal IS). The enterprise gateway will be in the demilitarized‑zone between two firewalls. It is responsible for forwarding the request to the internal IS, and validate the credentials of the s. On the network side we must apply the ‘na豒ing’ technique which is mapping the IP of the server to another one when going outside the company’s network(to the Internet) to hide the IP from Internet s or hackers. Firewall‑1 will block all the traffic received except the traffic received to the port of the enterprise gateway. Firewall‑2 will block all the traffic expect the traffic between the enterprise gateway and the internal server. The internal IS will automatically establish permanent connections with the enterprise gateway to be used in the communication. The advantage of this approach is that the connections between the DMZ (demilitarized‑zone) and the internal company’s network will be initiated from the internal network by the internal server which reduce the security risks by limiting the access of the DMZ to the internal network.
https://webmethodsexpert.com/category/security/
2/9
12/6/2016
Security | Webmethods Expert
Configuring the ‘Enterprise gateway’ In this section we will go through configuring the enterprise gateway, which is an Integration server with a special configuration. It was introduced in webMethods for the first time in version 8 under the name of ‘reverse h豒p gateway’. Here are the step to convert an integration server to Enterprise gateway: 1. From the Integration server page choose ‘security > add port’. 2. Choose ‘enterprise gateway server’ as the port type, and click on ‘submit’. Note: in version 8.x the enterprise gateway was called ‘reverse h豒p gateway server’.
(h豒ps://webmethodsexpert.files.wordpress.com/2015/05/img_0009.png) 3. After clicking the ‘submit’ bu豒on we will see the page in the below image:
(h豒ps://webmethodsexpert.files.wordpress.com/2015/05/img_0008.png) https://webmethodsexpert.com/category/security/ Enterprise gateways external port:
3/9
12/6/2016
Security | Webmethods Expert
Enterprise gateways external port: ‘Enable’: possible values are ‘yes’ which means that the port will be enabled automatically after saving the configuration, or ‘No’ which means that you have to enable the port manually to activate the external port of the enterprise gateway. Protocol: depending on the nature of the service, choose the protocol type h豒p, or h豒ps. Note: using h豒p or h豒ps decision has nothing to do with using DMZ decision, h豒ps will require configuring a security certificate. To be able to decide which protocol to use please check our ‘secured connection’ tutorial. (h豒ps://webmethodsexpert.com/2014/11/09/secure‑connection‑part‑1‑introduction/) Port: the communication port between the s’s devices/browsers and the enterprise gateway. You have to configure firewall‑1 to allow the traffic to this port. Alias: is the port alias, and it must be unique on the level of the port aliases in the integration server. Ex: ExternalPort555. Package name: the package which the port will be associated to it. Please leave the defaul value ‘wmRoot’ to make sure that the port is available as long as the integration server is up. Client authentication: possible values are 1)/ s have to provide their credentials to access the service, 2) digest, 3)request client certificate: if the customer doesn’t represent the certificate the gateway will use the /, 4) require client certificate: if the customer doesn’t represent the security certificate the request will be rejected. Enterprise gateways ation port: ‘Enable’: The same above explanation as the port external port se豒ings. Protocol: The same above explanation as the external port se豒ings. Port: is the port to be available for the communication between the enterprise gateway and the internal IS. You have to allow the traffic from the internal IS to this port in firewall‑2 access rules. Package: The same above explanation as the external port se豒ings. The value must match the value of pacakge field in the external port se豒ings. Client authentication: The same above explanation as the port external port se豒ings. 4. Click on ‘save changes’ bu豒on after finalizing your configuration.
Configuring the ‘Internal serverʹ(internal IS) 1. From the Integration server page choose ‘security > add port’. 2. Chose ‘Internal server’ as the port type, and click on ‘submit’. 3. After clicking the ‘submit’ bu豒on we will see the page in the below image.
https://webmethodsexpert.com/category/security/
4/9
12/6/2016
Security | Webmethods Expert
(h豒ps://webmethodsexpert.files.wordpress.com/2015/05/img_0007.png) Internal server configuration: Enable: choose ‘yes’ if you want to enable the port automatically after saving the se豒ings, and choose ‘no’ if you want to enable it later manually from IS > security >ports. Protocol: choose h豒p or h豒ps depending on the nature of your service as we stated earlier in this tutorial. Pacakge name: the pacakge which the port will be associated with it. Please keep the default value ‘wmRoot’. Alias: the unique alias of the port on the level of the IS as explained earlier. Enterprise gateway server: the host and port of the enterprise gateway to establish the permanent connection which will be used in the communication between the enterprise gateway and the internal server. Client authentication: the same options explained earlier in the enterprise gateway configuration. 4. After finalizing the configuration click ‘save changes’ bu豒on. Now our infrastructure is ready to receive requests from the Internet. Thank you for visiting our website. We are looking forward reading your comments and questions. Follow us: on twi豒er: @WM_Expert https://webmethodsexpert.com/category/security/ Group on LinkedIn: webmethodsExpert.com
5/9
12/6/2016
Security | Webmethods Expert
Group on LinkedIn: webmethodsExpert.com (C) 2015 Hossam Elsharkawy. All rights reserved.
Create/Manage KeyStore and TrustStore DECEMBER 9, 2014 HOSSAM ELSHARKAWY 2 COMMENTS This tutorial will discuss how create and manage the keystore and truststore. We will be using openSSL (open source tool), and the java keytool (existing with any jvm installation). If you are not familiar with the security certificates and how it works,It is strongly recommended to review our last articles ‘creating security certificate tutorial’, here is the link: h豒ps://webmethodsexpert.com/2014/11/24/creating‑security‑certificate‑tutorial/ (h豒ps://webmethodsexpert.com/2014/11/24/creating‑security‑certificate‑tutorial/) We will discuss the following points : 1. What is key store and trust store? 2. Why using the key store and trust store? 3. Create the keystore. 4. Manage the store with the java keytool. 1. What is key store and trust store? It is a protected file which is used to store security certificates, private keys, and root security certificates. The most common types are JKS (Java ket store), and PKCS12. The key store and trust store have the same format and capabilities, the difference is in how you use them in your application. Key store is used when your server is offering a secured connection (ex. h豒ps) to clients or servers, and it stores pair of private key, and security certificate. Trust store is used when you receive secured calls (ex. h豒ps), it stores the following: 1. Root security certificate (Certification authority certificate) : which is used to trust all the certificate issued by specific entity. Ex. Verisign certificate. 2. The partner’s self‑signed certificate : add the security certificate of the server calling you if you in the development or test servers and you use self‑signed certificate, or if you have a partner who you trust and who uses self‑signed certificate. 2. Why using keystore and truststore? https://webmethodsexpert.com/category/security/ ‘Security in depth’ is a concept which promotes the idea of creating layers of security, and more layers =6/9
12/6/2016
Security | Webmethods Expert
‘Security in depth’ is a concept which promotes the idea of creating layers of security, and more layers = more security. So by protecting your private key, and the certificate you trust in case of the trust store by pu豒ing them in a protected file will add a layer of security. To make it easier imagine the following situations : Your private key file is stored in a location in your application/server (in some cases without encryption), so anyone can access your server can take a copy from it and use it to decrypt your messages, or pretend that the message is coming from you. You use a specific folder to store the root security certificates, or partner security certificates you trust. So if someone copied a fake certificate in this folder your server will accept requests from untrusted server. The two above situations can be avoided by using the keystore and truststore. 3. Create the keystore For the keyStore you need to store your private key file, and your server certificate. You have two ways to do it: 1. Use the openSSL to generate the keystore with the private key and the certificate in the PKCS12 fromat (and you can convert it to JKS format with the java keytool). 2. Use the KeyTool to create the the JKS keystore, this option is not valid if you already have the certificate and private key. The only way to do it is by creating the private key, and generate the CSR (certificate g request). This is not always practical specially in the case of the self‑signed certificate. (we will not cover this way in the tutorial). So follow these steps to create your keystore: 1. Create the key store in the PKCS12 format. by executing this command in the openSSL: openssl pkcs12 ‑export ‑name myAlias ‑in myServer.crt ‑inkey myServer.key ‑out myKeyStore.p12 myServer.key : is the server’s private key myServer.crt : is the server’s security certificate myAlias : is the alias you will be using in your code to access the private key. The alias must be unique in each keystore, the alias is unique in this case as we are creating a new store. myKeyStore.p12: is the name of the new keystore generated from the command. Note : the new keystore ‘myKeyStore.p12’ will be in the bin directory of the openSSL. 2. Converting the keystore from the PKCS12 to JKS We will use the java keytool which is a part from the installation of the JVM, you should find it in the following bin folder :’\jvm\jvm\bin’ keytool ‑importkeystore ‑srckeystore myKeyStore.p12 ‑srcstoretype pkcs12 ‑destkeystore myKeyStore.jks ‑ deststoretype jks 4. Manage the store with the java keytool. https://webmethodsexpert.com/category/security/ Creating the truststore
7/9
12/6/2016
Security | Webmethods Expert
Creating the truststore The following command can be used to import the root certificate of the self‑signed certificate. keytool ‑import ‑file server.crt ‑alias myCertAlias ‑keystore myTrustStore.jks server.crt: The security certificate you want to import to the truststore. myCertAlias: The unique alias you will be using to access the certificate from the store myTrustStore.jks: The name of the truststore file. If the file doesn’t exist the keytool will create a new file, and if it was existing the certificate will be added to it. Delete certificate from the truststore To delete a certificate from an existing truststore. keytool ‑delete ‑alias myCertAlias ‑keystore myTrustStore.jks myCertAlias: the alias of the certificate to be deleted. myTrustStore.jks: the name of the keystore which contain the certificate ti be deleted. List the certificates in the Store List the items in the store, usually we use it to see what is in the truststore as it might contains more than a certificate, however you can use it to see the contents of keystore. Keytool ‑list ‑keystore mytruststore.jks mytruststore.jks: is the name of the store file (keystore or truststore) Change Alias in Trust Store or key store To change the alias of an existing entry in the store use the following command: keytool ‑changealias ‑alias oldAlias ‑destalias newAlias ‑keystore myStore.jks oldAlias: is the old alias name to be changed. newAlias: is the new alias name. myStore.jks: the JKS file name which contain the alias to be changed. Thank you for visiting our website. We are looking forward reading your comments and questions. Follow us: on twi豒er: @WM_Expert (h豒ps://twi豒er.com/WM_Expert) https://webmethodsexpert.com/category/security/ Group on LinkedIn: webmethodsExpert.com
8/9
12/6/2016
Security | Webmethods Expert
Group on LinkedIn: webmethodsExpert.com (C) 2014 Hossam Elsharkawy. All rights reserved. OLDER POSTS CREATE A FREE WEBSITE OR BLOG AT WORDPRESS.COM.
https://webmethodsexpert.com/category/security/
9/9
Security | Webmethods Expert
Webmethods Expert Stay Updated
Security
Building DMZ (DemilitrlalizedZone) using webMethods MAY 23, 2015 HOSSAM ELSHARKAWY LEAVE A COMMENT Offering your services through the Internet requires a special setup to secure your servers. In this tutorial we will discuss the standard setup for the DMZ (demilitarized zone) using webmethods components. This tutorial will cover the following points: The components to build Demilitrlalized‑zone. Configuring the ‘Enterprise gateway’ Configuring the ‘Internal serverʹ(internal IS) The components which will be used in building the DMZ are: Firewall: is a network component used to allow/deny the network traffic using a set of rules. WebMethods Enterprise gateway: is an integration server placed in the DMZ , it handles the communication between the external callers and the internal IS which will fulfill the request from inside the company’s network. Internal IS: is the the integration server which is the point of between the enterprise gateway in the DMZ and the internal network. https://webmethodsexpert.com/category/security/ Figure 1 : DMZ implementation
1/9
12/6/2016
Security | Webmethods Expert
Figure 1 : DMZ implementation
(h豒ps://webmethodsexpert.files.wordpress.com/2015/05/img_0010.png) As we see in figure 1: The area between the two firewalls is the DMZ (demilitarized‑zone). The servers in this area don’t include business logic or data, and have access to the internal server(internal IS). The enterprise gateway will be in the demilitarized‑zone between two firewalls. It is responsible for forwarding the request to the internal IS, and validate the credentials of the s. On the network side we must apply the ‘na豒ing’ technique which is mapping the IP of the server to another one when going outside the company’s network(to the Internet) to hide the IP from Internet s or hackers. Firewall‑1 will block all the traffic received except the traffic received to the port of the enterprise gateway. Firewall‑2 will block all the traffic expect the traffic between the enterprise gateway and the internal server. The internal IS will automatically establish permanent connections with the enterprise gateway to be used in the communication. The advantage of this approach is that the connections between the DMZ (demilitarized‑zone) and the internal company’s network will be initiated from the internal network by the internal server which reduce the security risks by limiting the access of the DMZ to the internal network.
https://webmethodsexpert.com/category/security/
2/9
12/6/2016
Security | Webmethods Expert
Configuring the ‘Enterprise gateway’ In this section we will go through configuring the enterprise gateway, which is an Integration server with a special configuration. It was introduced in webMethods for the first time in version 8 under the name of ‘reverse h豒p gateway’. Here are the step to convert an integration server to Enterprise gateway: 1. From the Integration server page choose ‘security > add port’. 2. Choose ‘enterprise gateway server’ as the port type, and click on ‘submit’. Note: in version 8.x the enterprise gateway was called ‘reverse h豒p gateway server’.
(h豒ps://webmethodsexpert.files.wordpress.com/2015/05/img_0009.png) 3. After clicking the ‘submit’ bu豒on we will see the page in the below image:
(h豒ps://webmethodsexpert.files.wordpress.com/2015/05/img_0008.png) https://webmethodsexpert.com/category/security/ Enterprise gateways external port:
3/9
12/6/2016
Security | Webmethods Expert
Enterprise gateways external port: ‘Enable’: possible values are ‘yes’ which means that the port will be enabled automatically after saving the configuration, or ‘No’ which means that you have to enable the port manually to activate the external port of the enterprise gateway. Protocol: depending on the nature of the service, choose the protocol type h豒p, or h豒ps. Note: using h豒p or h豒ps decision has nothing to do with using DMZ decision, h豒ps will require configuring a security certificate. To be able to decide which protocol to use please check our ‘secured connection’ tutorial. (h豒ps://webmethodsexpert.com/2014/11/09/secure‑connection‑part‑1‑introduction/) Port: the communication port between the s’s devices/browsers and the enterprise gateway. You have to configure firewall‑1 to allow the traffic to this port. Alias: is the port alias, and it must be unique on the level of the port aliases in the integration server. Ex: ExternalPort555. Package name: the package which the port will be associated to it. Please leave the defaul value ‘wmRoot’ to make sure that the port is available as long as the integration server is up. Client authentication: possible values are 1)/ s have to provide their credentials to access the service, 2) digest, 3)request client certificate: if the customer doesn’t represent the certificate the gateway will use the /, 4) require client certificate: if the customer doesn’t represent the security certificate the request will be rejected. Enterprise gateways ation port: ‘Enable’: The same above explanation as the port external port se豒ings. Protocol: The same above explanation as the external port se豒ings. Port: is the port to be available for the communication between the enterprise gateway and the internal IS. You have to allow the traffic from the internal IS to this port in firewall‑2 access rules. Package: The same above explanation as the external port se豒ings. The value must match the value of pacakge field in the external port se豒ings. Client authentication: The same above explanation as the port external port se豒ings. 4. Click on ‘save changes’ bu豒on after finalizing your configuration.
Configuring the ‘Internal serverʹ(internal IS) 1. From the Integration server page choose ‘security > add port’. 2. Chose ‘Internal server’ as the port type, and click on ‘submit’. 3. After clicking the ‘submit’ bu豒on we will see the page in the below image.
https://webmethodsexpert.com/category/security/
4/9
12/6/2016
Security | Webmethods Expert
(h豒ps://webmethodsexpert.files.wordpress.com/2015/05/img_0007.png) Internal server configuration: Enable: choose ‘yes’ if you want to enable the port automatically after saving the se豒ings, and choose ‘no’ if you want to enable it later manually from IS > security >ports. Protocol: choose h豒p or h豒ps depending on the nature of your service as we stated earlier in this tutorial. Pacakge name: the pacakge which the port will be associated with it. Please keep the default value ‘wmRoot’. Alias: the unique alias of the port on the level of the IS as explained earlier. Enterprise gateway server: the host and port of the enterprise gateway to establish the permanent connection which will be used in the communication between the enterprise gateway and the internal server. Client authentication: the same options explained earlier in the enterprise gateway configuration. 4. After finalizing the configuration click ‘save changes’ bu豒on. Now our infrastructure is ready to receive requests from the Internet. Thank you for visiting our website. We are looking forward reading your comments and questions. Follow us: on twi豒er: @WM_Expert https://webmethodsexpert.com/category/security/ Group on LinkedIn: webmethodsExpert.com
5/9
12/6/2016
Security | Webmethods Expert
Group on LinkedIn: webmethodsExpert.com (C) 2015 Hossam Elsharkawy. All rights reserved.
Create/Manage KeyStore and TrustStore DECEMBER 9, 2014 HOSSAM ELSHARKAWY 2 COMMENTS This tutorial will discuss how create and manage the keystore and truststore. We will be using openSSL (open source tool), and the java keytool (existing with any jvm installation). If you are not familiar with the security certificates and how it works,It is strongly recommended to review our last articles ‘creating security certificate tutorial’, here is the link: h豒ps://webmethodsexpert.com/2014/11/24/creating‑security‑certificate‑tutorial/ (h豒ps://webmethodsexpert.com/2014/11/24/creating‑security‑certificate‑tutorial/) We will discuss the following points : 1. What is key store and trust store? 2. Why using the key store and trust store? 3. Create the keystore. 4. Manage the store with the java keytool. 1. What is key store and trust store? It is a protected file which is used to store security certificates, private keys, and root security certificates. The most common types are JKS (Java ket store), and PKCS12. The key store and trust store have the same format and capabilities, the difference is in how you use them in your application. Key store is used when your server is offering a secured connection (ex. h豒ps) to clients or servers, and it stores pair of private key, and security certificate. Trust store is used when you receive secured calls (ex. h豒ps), it stores the following: 1. Root security certificate (Certification authority certificate) : which is used to trust all the certificate issued by specific entity. Ex. Verisign certificate. 2. The partner’s self‑signed certificate : add the security certificate of the server calling you if you in the development or test servers and you use self‑signed certificate, or if you have a partner who you trust and who uses self‑signed certificate. 2. Why using keystore and truststore? https://webmethodsexpert.com/category/security/ ‘Security in depth’ is a concept which promotes the idea of creating layers of security, and more layers =6/9
12/6/2016
Security | Webmethods Expert
‘Security in depth’ is a concept which promotes the idea of creating layers of security, and more layers = more security. So by protecting your private key, and the certificate you trust in case of the trust store by pu豒ing them in a protected file will add a layer of security. To make it easier imagine the following situations : Your private key file is stored in a location in your application/server (in some cases without encryption), so anyone can access your server can take a copy from it and use it to decrypt your messages, or pretend that the message is coming from you. You use a specific folder to store the root security certificates, or partner security certificates you trust. So if someone copied a fake certificate in this folder your server will accept requests from untrusted server. The two above situations can be avoided by using the keystore and truststore. 3. Create the keystore For the keyStore you need to store your private key file, and your server certificate. You have two ways to do it: 1. Use the openSSL to generate the keystore with the private key and the certificate in the PKCS12 fromat (and you can convert it to JKS format with the java keytool). 2. Use the KeyTool to create the the JKS keystore, this option is not valid if you already have the certificate and private key. The only way to do it is by creating the private key, and generate the CSR (certificate g request). This is not always practical specially in the case of the self‑signed certificate. (we will not cover this way in the tutorial). So follow these steps to create your keystore: 1. Create the key store in the PKCS12 format. by executing this command in the openSSL: openssl pkcs12 ‑export ‑name myAlias ‑in myServer.crt ‑inkey myServer.key ‑out myKeyStore.p12 myServer.key : is the server’s private key myServer.crt : is the server’s security certificate myAlias : is the alias you will be using in your code to access the private key. The alias must be unique in each keystore, the alias is unique in this case as we are creating a new store. myKeyStore.p12: is the name of the new keystore generated from the command. Note : the new keystore ‘myKeyStore.p12’ will be in the bin directory of the openSSL. 2. Converting the keystore from the PKCS12 to JKS We will use the java keytool which is a part from the installation of the JVM, you should find it in the following bin folder :’\jvm\jvm\bin’ keytool ‑importkeystore ‑srckeystore myKeyStore.p12 ‑srcstoretype pkcs12 ‑destkeystore myKeyStore.jks ‑ deststoretype jks 4. Manage the store with the java keytool. https://webmethodsexpert.com/category/security/ Creating the truststore
7/9
12/6/2016
Security | Webmethods Expert
Creating the truststore The following command can be used to import the root certificate of the self‑signed certificate. keytool ‑import ‑file server.crt ‑alias myCertAlias ‑keystore myTrustStore.jks server.crt: The security certificate you want to import to the truststore. myCertAlias: The unique alias you will be using to access the certificate from the store myTrustStore.jks: The name of the truststore file. If the file doesn’t exist the keytool will create a new file, and if it was existing the certificate will be added to it. Delete certificate from the truststore To delete a certificate from an existing truststore. keytool ‑delete ‑alias myCertAlias ‑keystore myTrustStore.jks myCertAlias: the alias of the certificate to be deleted. myTrustStore.jks: the name of the keystore which contain the certificate ti be deleted. List the certificates in the Store List the items in the store, usually we use it to see what is in the truststore as it might contains more than a certificate, however you can use it to see the contents of keystore. Keytool ‑list ‑keystore mytruststore.jks mytruststore.jks: is the name of the store file (keystore or truststore) Change Alias in Trust Store or key store To change the alias of an existing entry in the store use the following command: keytool ‑changealias ‑alias oldAlias ‑destalias newAlias ‑keystore myStore.jks oldAlias: is the old alias name to be changed. newAlias: is the new alias name. myStore.jks: the JKS file name which contain the alias to be changed. Thank you for visiting our website. We are looking forward reading your comments and questions. Follow us: on twi豒er: @WM_Expert (h豒ps://twi豒er.com/WM_Expert) https://webmethodsexpert.com/category/security/ Group on LinkedIn: webmethodsExpert.com
8/9
12/6/2016
Security | Webmethods Expert
Group on LinkedIn: webmethodsExpert.com (C) 2014 Hossam Elsharkawy. All rights reserved. OLDER POSTS CREATE A FREE WEBSITE OR BLOG AT WORDPRESS.COM.
https://webmethodsexpert.com/category/security/
9/9
Related Documents 3m3m1z
Security _ Webmethods Expert 4d5y45
November 2019 55
Webmethods Architecture By Webmethods Kb 91j5f
April 2022 0
Webmethods Broker 502c6u
December 2019 51
Webmethods Workflow 481g5q
December 2019 50
Webmethods Edi Module Introduction 115z2s
December 2019 54
Webmethods Interview Questions 6t503o
November 2019 48More Documents from "venkatesh" 92v6r
6l6m1j
October 2019 90
Webmethods Regular Expressions m6s4d
November 2021 0
Security _ Webmethods Expert 4d5y45
November 2019 55
Webmethods Architecture By Webmethods Kb 91j5f
April 2022 0
6l6m1j
November 2019 103