Systech Syslink M2m Gateway Certified As Thingworx Ready 3x481x

What is Machine to machine Communication Machine to machine (M2M) refers to technologies that allow both wireless and wired systems to communicate with other devices of the same ability. M2M uses a device (such as a sensor or meter) to capture an event (such as temperature, inventory level, etc.), which is relayed through a network (wireless, wired or hybrid) to an application (software program), that translates the captured event into meaningful information (for example, items need to be restocked). Such communication was originally accomplished by having a remote network of machines relay information back to a central hub for analysis, which would then be rerouted into a system like a personal computer. However, modern M2M communication has expanded beyond a one-to-one connection and changed into a system of networks that transmits data to personal appliances. The expansion of IP networks across the world has made it far easier for M2M communication to take place and has lessened the amount of power and time necessary for information to be communicated between machines. These networks also allow an array of new business opportunities and connections between consumers and producers in of the products being sold.

History M2M has existed in different forms since the advent of computer networking automation and predates cellular communication. It has been utilized in applications such as "telemetry", "industrial" "automation", "SCADA". While cellular is becoming more common, sizable numbers of machines still use land lines (POTS, DSL, cable) to connect to the IP network. The cellular M2M communications industry emerged in 1995 when Siemens set up a dedicated department inside its mobile phones business unit to develop and launch a GSM data module called “M1” based on the Siemens mobile phone S6 for M2M industrial applications, enabling machines to communicate over wireless networks. In October 2000, the modules department formed a separate business unit inside Siemens called "Wireless Modules" which in June 2008 became a standalone company called Cinterion Wireless Modules. The first M1 module was used for early point of sale (POS) terminals, in vehicle telematics, remote monitoring and tracking and tracing applications. M2M technology was first embraced by early implementers such as GM and Hughes Electronics Corporation who realized the benefits and future potential of the technology. By 1997, M2M wireless technology became more prevalent and sophisticated as ruggedized modules were developed and launched for the specific needs of different vertical markets such as automotive telematics. Today, M2M data modules are extremely sophisticated and come with an array of features and capabilities such as onboardglobal positioning (GPS) technology, flexible land grid array surface mounting, embedded M2M optimized smart cards (like phone SIMs) known as MIMs or M2M identification modules, and embedded Java, an important enabling technology to accelerate the Internet of Things (IOT). Another example of an early use is OnStar's system of communication. The hardware components of a Machine to Machine network are manufactured by a few key players. In 2004, Digi International began producing wireless gateways and routers. Shortly after in 2006, Digi purchased Max Stream, the manufacturer of XBee radios. These hardware components allowed s to connect machines no matter how remote their location. Since then, Digi has partnered with several companies to connect hundreds of thousands of devices around the world.

In 2009, AT&T and Jasper Wireless entered into an agreement to the creation of M2M devices tly. They have stated that they will be trying to drive further connectivity betweenconsumer electronics and M2M wireless networks, which would create a boost in speed and overall power of such devices. 2009 also saw the introduction of real-time management of GSM and CDMA network services for M2M applications with the launch of the PRiSMPro™ Platform from M2M network provider KORE Telematics. The platform focused on making multi-network management a critical component for efficiency improvements and cost-savings in M2M device and network usage. Also in 2009, the Norwegian incumbent Telenor concluded ten years of M2M research by setting up two entities serving the upper (services) and lower (connectivity) parts of the value-chain. Telenor Connexion in Sweden draws on Vodafone's former research capabilities in subsidy Europolitan and is a market leader in Europe's market for services across such typical markets as logistics, fleet management, car safety, healthcare, and smart metering of electricity consumption. Telenor Objects has a similar role supplying connectivity to M2M networks across Europe. In December, 2009, Spanish Telefonica announced that they are also setting up a M2M entity in Madrid. In the UK, Business MVNO Abica, commenced trials with Telehealth and Telecare applications which required secure data transit via Private APN andHSPA+ connectivity. In early 2010 in the U.S., AT&T, KPN, Rogers, Telcel / America Movil and Jasper Wireless began to work together in the creation of a M2M site, which will serve as a hub for developers in the field of M2M communication electronics. In February 2010, Vodafone, Verizon Wireless and nPhase (a t partnership of Qualcomm and Verizon) announced their strategic alliance to provide global M2M solutions that would offer their customers an easy way to roll out M2M solutions across Europe and the US. In March 2010, Sprint and Axeda Corporation announced their strategic alliance for global M2M solutions.In January 2011, Aeris Communications, Inc. announced that it is providing M2M telematics services for Hyundai Motor Corporation. Partnerships like these make it easier, faster and more cost-efficient for businesses to use M2M. In June 2010, mobile messaging operator tyntec announced the availability of its high-reliability SMS services for M2M applications. In March of 2011, M2M network service provider KORE Wireless teamed with Vodafone Group and Iridium Communications Inc., respectively, to make KORE Global Connect network services available via cellular and satellite connectivity in more than 180 countries, with a single point for billing, , logistics and relationship management. Later that year, KORE acquired Australia-based Mach Communications Pty Ltd. in response to increased M2M demand within Asia-Pacific markets. Cloud connectivity is becoming a significant piece of the M2M Solution as cellular and wireless connection speeds increase. M2M solutions providers now offer Platforms as a Service (PaaS), which simplify machine networks by allowing s to manage deployments remotely. Device Cloud by Etherios is a PaaS that can integrated into the Sales Force platform and offers API's that can be used to develop a custom application. According to ABI Research M2M application security will see strong growth over the next five years, with global revenues hitting $198 million by 2018. According to the independent wireless analyst firm Berg Insight, the number of cellular network connections worldwide used for M2M communication was 47.7 million in 2008. The company forecasts that the number of M2M connections will grow to 187 million by 2014.

A research study from the E-Plus Group shows that in 2010 2.3 million M2M smart cards will be in the German market. According to the study, this figure will rise in 2013 to over 5 million smart cards. The main growth driver is segment “tracking and tracing” with an expected average growth rate of 30 percent. The fastest growing M2M segment in , with an average annual growth of 47 percent, will be the consumer electronics segment. In May 2013, M2M network service providers KORE Telematics, Oracle, Deutsche Telekom, Digi International, ORBCOMM and Telit formed the International M2M Council (IMC). The first trade organization to service the entire M2M ecosystem, the IMC aims at making M2M ubiquitous by helping companies instill and manage the communication between machines.

Applications Wireless networks that are all interconnected can serve to improve production and efficiency in various areas, including machinery that works on building cars and on letting the developers of products know when certain products need to be taken in for maintenance and for what reason. Such information serves to streamline products that consumers buy and works to keep them all working at highest efficiency. Another application is to use wireless technology to monitor systems, such as utility meters. This would allow the owner of the meter to know if certain elements have been tampered with, which serves as a quality method to stop fraud. In Quebec Canada, Rogers will connect Hydro Quebec's central system with up to 600 Smart Meter collectors, which aggregate data relayed from the province's 3.8-million Smart Meters. A third application is to use wireless networks to update digital billboards. This allows rs to display different messages based on time of day or day-of-week, and allows quick global changes for messages, such as pricing changes for gasoline. Telematics and in-vehicle entertainment is an area of focus for M2M developers. Recent examples include Ford Motor Company, which has teamed with AT&T to wirelessly connect Ford Focus Electric with an embedded wireless connection and dedicated app that includes the ability for the owner to monitor and control vehicle charge settings, plan single- or multiple-stop journeys, locate charging stations, pre-heat or cool the car. In 2011, Audi partnered with T-Mobile and RACO Wireless to offer Audi Connect. Audi Connect allows s access to news, weather, and fuel prices while turning the vehicle into a secure mobile Wi-Fi hotspot, allowing engers access to the Internet.

Open M2M initiatives[edit] 

Eclipse M2M Industry Working Group (open communication protocols, tools, and frameworks), the umbrella of various projects: 

Eclipse Koneki



Eclipse Paho



ITU-T Focus Group M2M (global standardization initiative for a common M2M service layer)



TIA TR-50 Engineering Committee (convergence layer standardization initiative)



BITXML (protocol)



M2MXML (protocol)



COOS Project (connectivity initiative)



Weightless (wireless communications) - standard group focusing on using TV 'white space' for M2M



XMPP (Jabber) protocol



Ericsson ED (M2M solution over telecom carrier)



Plintron(Transforming data into actionable intelligence)

[29]

What is Machine to Machine Communication? MACHINE-TO-MACHINE

M2M is about enabling the flow of data between machines and machines and ultimately machines and people. Regardless of the type of machine or data, information usually flows in the same general way -- from a machine over a network, and then through a gateway to a system where it can be reviewed and acted on. Within that basic framework, there are many different choices to make such as how the machine is connected, what type of communication is used, and how the data is used. Even though it can be complex, once a company knows what it wants to do with the data, the options for setting up the application are usually straightforward. When it comes to the finer points of machine to machine communication, every deployment is unique. However, there are four basic stages that are common to just about every M2M application. Those components are: 

1) Collection of data



2) Transmission of selected data through a communication network



3) Assessment of the data



4) Response to the available information

1) Collection of Data The intelligence of a monitored machine may be as simple as a temperature sensor, level indicator or closure, or it may

be an industrial computer system with a Modbus communication port. The process of M2M communication begins with taking data out of a machine so that it can be analyzed and sent over a network. Monitoring a “dumb” machine may mean directly connecting to and monitoring one or more limit switches, closures or analog outputs. With an intelligent electronic device, it may be possible to simply connect to the equipment’s serial port and ask for the data. The goal of the M2M hardware is to bridge the intelligence in the machine with the communication network. An intelligent wireless data module is physically integrated with the monitored machine and programmed to understand the machine’s protocol (the way it sends and receives data). If the monitored machine is configured as an intelligent master device, it may treat the M2M device as a simple wireless modem, loading it up with data and then instructing it to transmit that data to the network. If the machine is just a collection of switches and sensors or is an intelligent slave device, the M2M device can act as the master device. In this mode, it takes charge by periodically polling the device by reading the sensors and switches or by sending data requests through the serial port. In a high end application like a major electric utility substation, it may be necessary to send a constant stream of real time data describing the machine or process. But in many cases, this is not necessary or worth the cost. In these cases, the M2M device should minimize the amount of data to be sent by constantly reviewing the data, comparing it against programmable alarm limits or setpoints, and then only transmitting real time information when a reading is out-of-limits.

In addition the application will typically be programmed to send complete data updates on a time scheduled basis or anytime upon request from the web server. 2) Transmission of data through a communication network There are several good options for transporting data from the remote equipment to the network operation center. The cellular network, telephone lines, and communication satellites are all common solutions. The telephone may be the best choice if a line is already installed and the cost can be shared with other uses. Its disadvantage is usually the ongoing monthly cost and sometimes the cost and difficulty of installation. Satellite may be the most expensive solution, but is often the best or only solution for monitoring equipment in very remote areas. The wide spread coverage of the cellular network is the main reason M2M is getting so much attention these days, and it’s usually the method that fits best. There are several methods of sending data over the cellular network. CDMA and GPRS are both widespread in North America today and their coverage areas continue to grow. The advantage of these systems is the ability to send large amounts of data frequently. The costs continue to drop. Connecting to the cellular or satellite network typically requires the use of a gateway. A gateway receives the data from the wireless communication network and converts it so that it can be sent to the network operation center, often over the Internet or by a frame relay (phone line) connection. Data security features such as authentication and access control can be managed by the gateway and the application software.

The gateway also has an important role when the flow of data is reversed, going from a network to the machine for data requests and remote control. The gateway still functions as a protocol converter, but this time it takes high-bandwidth Internet protocols and converts them to low-bandwidth wireless protocols so the data is optimized for transfer over a cellular network. For companies deploying an M2M application, the gateway, the application software, and the data warehouse can be housed internally or can be hosted by a third party in a network operations center. In many cases, the hosted model may be more attractive because of the high cost involved in setting up the infrastructure and managing the network. Since the upfront cost is often lower with the hosted model, the payback can be faster and the solution can be deployed in less time. 3) Assessment of the data Data from a company’s networked machines usually shows up in one of two places: in an enterprise software application the company already uses, or in a standalone system designed specifically for M2M. Today’s deployments tend to favor standalone systems for applications such as remote monitoring because most M2M application providers specialize in providing these and there can be additional costs involved with integrating new data into existing systems. Still, the vast majority of opportunities for M2M center around taking data out of machines and integrating it with operational data. For example, remote monitoring data can be incorporated into customer-relationship management systems for logging service and maintenance history.

4) Response to the available information Whether the application is standalone or part of a larger system, the common goal is to automate a business process by automating the flow of data to the people and systems that have a need to know. The technology should enable sending the right data to the right place in the right way depending on the circumstances. It should also present data to individual s based on their specific function in the business process. For example, an HVAC system monitor might e-mail a routine maintenance request for an adjustment or lubrication to Siegfred and an emergency voice call for a thrown belt or tripped breaker to Roy. A modern farmer who has automated irrigation systems operating in different locations can now be constantly aware of their operation based on short messages that are relayed to his pager or cell phone. Of course, none of this technology is specific to M2M; the whole purpose of business software is to keep people from having to do everything manually. The new element that M2M brings to the picture is that now companies have new data to work with, data that is central to the way they operate and the value they provide.

How Machine-to-Machine Communication Works

Machine-to-machine communications can be used to monitor traffic in real time, like at this Los Angeles traffic center. © David McN ew/Getty Images

Applications of M2M Communications It's easy to see why machine-to-machine communications have so many applications. With better sensors, wireless networks and increased computing capability, deploying an M2M makes sense for many sectors. Utility companies, for instance, use M2M communications, both in harvesting energy products, such as oil and gas, and in billing customers. In the field, remote sensors can detect important parameters at an oil drill site. The sensors can send information wirelessly to a computer with specific details about pressure, flow rates and temperatures or even fuel levels in on-site equipment. The computer can automatically adjust on-site equipment to maximize efficiency.

Traffic control is another dynamic environment that can benefit from M2M communications. In a typical system, sensors monitor variables such as traffic volume and speed. The sensors send this information to computers using specialized software that controls traffic-control devices, like lights and variable informational signs. Using the incoming data, the software manipulates the traffic control devices to maximize traffic flow. Researchers are studying ways to create M2M networks that monitor the status of infrastructure, such as bridges and highways [source: Southern Illinois University News].

Telemedicine offers another use. For instance, some heart patients wear special monitors that gather information about the way their heart is working. The data is sent to implanted devices that deliver a shock to correct an errant rhythm. Business also can use M2M communications for tracking inventory and security. Late in 2007, M2M communications helped break up a heavy equipment theft ring. A rental company noticed sensors on its equipment showed the bulldozers were almost 100 miles from where they were supposed to be. Checking on other equipment rented the same day at different locations showed a similar trend, and the business used its M2M communications to disable the engines on the equipment and ed law enforcement. Officers found that the company's equipment, along with a dozen other stolen pieces, were headed for the Mexican border. Machine-to-machine communication appears to have a bright future. It's a flexible technology that uses common equipment in new ways. Every day, businesses, engineers, scientists, doctors and many others are finding new ways to use this new communications tool. For more information about M2M communications and related topics, check out the links on the next page.

Systech SysLINK M2M Gateway Certified as ThingWorx Ready http://www.thingworx.com/2013/03/systech-m2m-gateway-thingworx-ready/

EXTON, Pa.—March 19, 2013—ThingWorx™ today announced that Systech Corporation, an industry leader in the design and manufacturing of Serial-to-IP and Dial-to-IP network conversion devices for enabling IP communications, has completed certification of its SysLINK M2M Gateway as ThingWorx Ready™. This certification makes the SysLINK family of gateways compatible with the ThingWorx platform, resulting in a pre-integrated solution that improves time to market and reduces overall solution costs for customers utilizing the SysLINK M2M Gateway. The ThingWorx Ready Program allows hardware and software companies to pre-integrate their products with the ThingWorx rapid application development platform, greatly simplifying the creation and deployment of M2M solutions. This program is being utilized by a growing ecosystem of ThingWorx partners, from software system and cloud platform providers to hardware companies that provide smart sensors, devices, gateways, and machines. For Systech, the integration of ThingWorx with the SysLINK M2M Gateway combines Systech’s flexible, modular architecture with the rapid application development tools provided by ThingWorx. This provides customers with a secure, easy approach to developing new M2M applications for building automation, point of sale, security, energy management, mobile health, and industrial environments, among others.

“Being able to provide M2M solutions to customers in days, rather than weeks or months, is a huge benefit,” said Robert Lutz, Director of Business Development of Systech. “M2M is such a diverse market, and customer application requirements are all over the map. The drag-and-drop mashup architecture of ThingWorx is a good match for the flexible plug-and-play hardware option cards of our SysLINK Modular M2M Gateway.” Systech’s certification as ThingWorx Ready includes pre-integration of the ThingWorx Edge MicroServer with the SysLINK gateway, which is uniquely able to communicate and bridge a wide variety of protocols and standards while providing edge intelligence to analyze, filter, and take action on remote sensor readings and device data. This integrated solution creates greater flexibility in connectivity with cloudbased monitoring services, and provides a secure, easy approach to developing new applications for home, commercial, and retail environments. “The number of new and innovative applications that utilize connected devices is growing fast and providing a tremendous opportunity for companies that can quickly develop end-to-end solutions,” said Russ Fadel, CEO and Co-Founder of ThingWorx. “Now that Systech’s SysLINK M2M Gateway is ThingWorx Ready, Systech can offer clients the combination of flexible hardware and a 10X development efficiency advantage, reducing time, cost, and risk in building their connected solutions.”

About Systech Corporation Systech Corporation, established in 1981, is an industry leader in network conversion gateways, servers, and switches, ing a wide variety of interfaces including Cellular, Ethernet, Wi-Fi, Analog Dial, Serial, Bluetooth, ZigBee, Z-Wave, and USB. Systech brings network connectivity to IP and non-IP based systems for a wide variety of applications including ATM, point-of-sale, vending, remote electronic signage, building automation and security, and remote monitoring. Additional information can be found at www.systech.com. About ThingWorx ThingWorx™ provides the first platform designed to efficiently build and run the applications of today’s connected world. ThingWorx’ model-based design and search-based intelligence reduces application development efforts by 10X, minimizing cost, risk and time to market. The ThingWorx platform combines the key functionality of Web 2.0, search, and social collaboration, and applies it to the world of “things,” including connected products, machines, sensors, and industrial equipment. Businesses use the ThingWorx platform to rapidly deliver innovative applications and connected solutions across markets ranging from manufacturing, energy, and food, to Machine-to-Machine (M2M) remote monitoring and service, as well as in emerging Internet of Things applications, including smart cities, smart grid, agriculture, and transportation. For more information, please visit our website at www.thingworx.com and our blog atwww.thingworx.com/blog or follow us on Twitter at @ThingWorx.

Systech Launches New Product Line http://www.systech.com/syslink-launch



Configurable router ing Ethernet, Wi-Fi, and Cellular 2G, 3G, and 4G cellular networks



Analog dial ports including dial backup



Wi-Fi hotspot



USB, serial, Bluetooth, ZigBee, & Z-Wave



Motion detection and location based services



Remote monitoring



PA-DSS certified



Field upgradable option cards

The Systech® SysLINK™ M2M Gateway is a revolutionary modular communication gateway, designed to fit your specific requirements for home, commercial, and retail applications. Both hardware and software are configurable to the features and capabilities that any application requires. The modular architecture will adapt to fit your needs perfectly.

The SysLINK Gateway is a full-function router, including DH, NAT, VPN, and firewall capabilities. Eliminate costly analog dial lines by tying legacy analog equipment to SysLINK integrated analog ports. Simplify security and surveillance operation with a cloud-based monitoring service tied to IP or Wi-Fi cameras, and ZigBee or Z-Wave monitoring and control peripherals. Optional internal accelerometer and temperature sensors provide a unique ability to monitor local conditions and track movement. Similar to a traditional desktop computer, SysLINK products provide interface slots that may be optionally populated to extend the features and functionality of the gateway. Among the many interfaces ed with field upgradable modules are option cards that Wi-Fi, 2G/3G/4G LTE cellular, ZigBee, ZWave, LE Bluetooth 4.0, digital ports, serial ports, a modem, and analog dialup ports. The SysLINK gateway is uniquely able to communicate and bridge a wide variety of protocols and standards, while providing local intelligence to analyze, filter, and take action. The embedded Linux operating system provides the power and flexibility required to automatically.

For questions or visit our page or write to [email protected]. Customers outside the US call: 858-674-650

Systech demonstrates the SysLink family of M2M Modular Gateways at Connected World Conference http://www.systech.com/2008-press-releases-othermenu-14/359-systech-demonstrates-thesyslink-family-of-m2m-modular-gateways-at-connected-world-conference San Diego, CA - Systech demonstrates its newest member of its M2M (Machine to Machine) product family, the SL-2000 Modular Gateway at this years Connected World Conference held at the Santa Clara Convention Center. The SL-2000 is a modular network router that provides custom configurations that match the requirements of many M2M applications. The gateway s two Ethernet ports, two USB ports, and two internal slots to any combination of cellular and Wi-Fi connectivity. Additionally, the internal slots offer the ability to communicate using POTS, Serial, Bluetooth, ZigBee, Z-Wave, or GPIO. Many applications require the use of ZigBee and Z-Wave wireless technologies, and the SysLINK gateway can both simultaneously. "Systech SL-2000 is an excellent platform to show of the rapid application development capabilities of ThingWorx. The ability to communicate with both Zigbee and Z-wave modules gives solutions designers more freedom to develop the best solutions. " says Thingworx Director of Marketing, Chirs Kuntz. "This flexible hardware platform, combined with the rapid development features of ThingWorx, helps reduce the time, cost, and risk of building new and innovative applications in today's connected world." The Systech SysLINK SL-2000 M2M Modular Gateway will be featured in the ThingWorx booth at the Connected World Conference to be held this week in the Santa Clara Convention Center June 9 – 13, 2013. ###

About ThingWorx ThingWorx™ provides the first platform designed to efficiently build and run the applications of today's connected world. Businesses use the ThingWorx platform to rapidly deliver innovative applications and connected solutions across markets ranging from manufacturing, energy, and food, to Machine-toMachine (M2M) remote monitoring and service, as well as in emerging Internet of Things applications, including smart cities, smart grid, agriculture, and transportation. For more information, visit www.thingworx. About Systech Systech Corporation, established in 1981, is an industry leader in network conversion gateways, servers, and switches, ing a wide variety of interfaces including Cellular, Ethernet, Wi-Fi, Analog Dial, Serial, Bluetooth, ZigBee, Z-Wave, and USB. Systech brings network connectivity to IP and non-IP based systems for a wide variety of applications including ATM, point-of-sale, vending, remote electronic signage, building automation and security, and remote monitoring. Additional information can be found at www.systech.com

Press release: Systech SysLINK M2M Gateway Certified as ThingWorx Ready http://in.reuters.com/article/2013/03/19/pa-thingworx-idUSnBw6J3t6ka+120+BSW20130319

http://pdf.reuters.com/htmlnews/8knews.asp?i=43059c3bf0e37541&u=urn:newsml:reuters.com :20130319:nBw195453a Pre-integrated solution simplifies machine-to-machine (M2M) application development and improves time to market for customers in a wide range of markets EXTON, Pa.--(Business Wire)-ThingWorx today announced that Systech Corporation, an industry leader in the design and manufacturing of Serial-to-IP and Dial-to-IP network conversion devices for enabling IP communications, has completed certification of its SysLINK M2M Gateway as ThingWorx Ready. This certification makes the SysLINK family of gateways compatible with the ThingWorx platform, resulting in a pre-integrated solution that improves time to market and reduces overall solution costs for customers utilizing the SysLINK M2M Gateway. The ThingWorx Ready Program allows hardware and software companies to pre-integrate their products with the ThingWorx rapid application development platform, greatly simplifying the creation and deployment of M2M solutions. This program is being utilized by a growing ecosystem of ThingWorx partners, from software system and cloud platform providers to hardware companies that provide smart sensors, devices, gateways, and machines. For Systech, the integration of ThingWorx with the SysLINK M2M Gateway combines Systech`s flexible, modular architecture with the rapid application development tools provided by ThingWorx. This provides customers with a secure, easy approach to developing new M2M applications for building automation, point of sale, security, energy management, mobile health, and industrial environments, among others.

"Being able to provide M2M solutions to customers in days, rather than weeks or months, is a huge benefit," said Robert Lutz, Director of Business Development of Systech. "M2M is such a diverse market, and customer application requirements are all over the map. The drag-and-drop mashup architecture of ThingWorx is a good match for the flexible plug-and-play hardware option cards of our SysLINK Modular M2M Gateway." Systech`s certification as ThingWorx Ready includes pre-integration of the ThingWorx Edge MicroServer with the SysLINK gateway, which is uniquely able to communicate and bridge a wide variety of protocols and standards while providing edge intelligence to analyze, filter, and take action on remote sensor readings and device data. This integrated solution creates greater flexibility in connectivity with cloud-based monitoring services, and provides a secure, easy approach to developing new applications for home, commercial, and retail environments. "The number of new and innovative applications that utilize connected devices is growing fast and providing a tremendous opportunity for companies that can quickly develop end-to-end solutions," said Russ Fadel, CEO and Co-Founder of ThingWorx. "Now that Systech`s SysLINK M2M Gateway is ThingWorx Ready, Systech can offer clients the combination of flexible hardware and a 10X development efficiency advantage, reducing time, cost, and risk in building their connected solutions." About Systech Corporation Systech Corporation, established in 1981, is an industry leader in network conversion gateways, servers, and switches, ing a wide variety of interfaces including Cellular, Ethernet, Wi-Fi, Analog Dial, Serial, Bluetooth, ZigBee, Z-Wave, and USB. Systech brings network connectivity to IP and non-IP based systems for a wide variety of applications including ATM, point-of-sale, vending, remote electronic signage, building automation and security, and remote monitoring. Additional information can be found at www.systech.com. About ThingWorx ThingWorx provides the first platform designed to efficiently build and run the applications of today`s connected world. ThingWorx` model-based design and search-based intelligence reduces application development efforts by 10X, minimizing cost, risk and time to market. The ThingWorx platform combines the key functionality of Web 2.0, search, and social collaboration, and applies it to the world of "things," including connected products, machines, sensors, and industrial equipment. Businesses use the ThingWorx platform to rapidly deliver innovative applications and connected solutions across markets ranging from manufacturing, energy, and food, to Machine-to-Machine (M2M) remote monitoring and service, as well as in emerging Internet of Things applications, including smart cities, smart grid, agriculture, and transportation. For more information, please visit our website at www.thingworx.com and our blog at www.thingworx.com/blog or follow us on Twitter at @ThingWorx. Press: For ThingWorx Hannah Messinger, 610-228-2147 [email protected] Copyright Business Wire 2013

Systech Launches adds a new member to the SysLink family of M2M Modular Gateways http://www.prnewswire.com/news-releases/systech-launches-adds-a-new-member-to-the-syslinkfamily-of-m2m-modular-gateways-208138811.html#prettyPhoto

SAN DIEGO, May 20, 2013 /PRNewswire-iReach/ -- Systech launches its newest member of its M2M (Machine to Machine) product family, the SL-2000 Modular Gateway. The new product will be on display at this years CTIA Wireless show. (Photo: http://photos.prnewswire.com/prnh/20130520/CG16878) The SL-2000 is a modular network router that provides custom configurations that match the requirements of many M2M applications. The gateway s two Ethernet ports, two USB ports, and two internal slots to any combination of cellular and Wi-Fi connectivity. Additionally, the internal slots offer the ability to communicate using POTS, Serial, Bluetooth, ZigBee, Z-Wave, or GPIO. Many applications require the use of ZigBee and Z-Wave wireless technologies, and the SysLINK gateway can both simultaneously. "Customers have found this modular solution to be extremely attractive. Similar to children's building blocks, it is easy to plug the SysLINK modular pieces together to produce exactly the right solution" says Robert Lutz, Director of Business Development at Systech. "Also, should the customer's needs change, the SL-2000 can change along with it." Thingworx, a Systech partner, will be showing a demo of its software system and cloud platform at this week's CTIA Wireless event in Las Vegas. The Systech SysLINK SL-2000 M2M Modular Gateway will be featured in the ThingWorx booth (#6240) demonstrating the building automation features of the product. About ThingWorx ThingWorx™ provides the first platform designed to efficiently build and run the applications of today's connected world. Businesses use the ThingWorx platform to rapidly deliver innovative applications and connected solutions

across markets ranging from manufacturing, energy, and food, to Machine-to-Machine (M2M) remote monitoring and service, as well as in emerging Internet of Things applications, including smart cities, smart grid, agriculture, and transportation. For more information, visit www.thingworx.com About Systech Systech Corporation, established in 1981, is an industry leader in network conversion gateways, servers, and switches, ing a wide variety of interfaces including Cellular, Ethernet, Wi-Fi, Analog Dial, Serial, Bluetooth, ZigBee, Z-Wave, and USB. Systech brings network connectivity to IP and non-IP based systems for a wide variety of applications including ATM, point-of-sale, vending, remote electronic signage, building automation and security, and remote monitoring. Additional information can be found at www.systech.com. Media : Cheri Houchin Systech Corporation, 858-674-6500 x429, [email protected] News distributed by PR Newswire iReach: https://ireach.prnewswire.com SOURCE Systech Corporation

RELATED LINKS http://www.systech.com http://www.thingworx.com

Systech SysLink LS-1000 (Antenna Sold Separately)

http://www.accesswds.com/Pages/Systech/SysLink.htm

The SysLINK M2M Gateway is a full-function router, including DH, NAT, VPN, and firewall capabilities. With enterprise quality remote management, network configuration options can be changed or updated via remote control. Additionally, the SysLINK M2M Gateway provides M2M connectivity for multiple applications including point-of-sale, building automation, security, energy management, and mobile health. The key to ing various M2M applications is modularity and flexibility. Similar to a traditional desktop computer, the SysLINK M2M Gateway provides interface slots that may be optionally populated to extend the features and

functionality of the gateway. Optional wireless interfaces include Wi-Fi, 2G/3G/4G LTE cellular, ZigBee, Z-Wave, and Bluetooth. Wired interface options include digital I/O ports, serial ports, and analog dialup ports. It is easy to optimize the SysLINK M2M Gateway with exactly the required communication options. The SysLINK gateway is uniquely able to communicate and bridge a wide variety of protocols and standards, while providing local intelligence to analyze, filter, and take action. The embedded Linux operating system provides the power and flexibility required to automatically adjust to individual hardware and software configurations. Additionally, custom software may be integrated to provide application-specific, valueadded features to provide a truly unique solution. Key Features:       

Configurable router ing Ethernet, Wi-Fi, and Cellular Remote monitoring & management Field upgradable option cards including: 2G, 3G, and 4G cellular Analog dial ports including dial backup Wi-Fi, Bluetooth USB, Serial ZigBee, Z-Wave PA-DSS certified for financial transactions Motion detection and location based services

Key Benefits:      

s wide variety of M2M markets including Building Automation, Vending, Kiosk, Signage, mHealth, Energy Management Flexible interfaces such as ZigBee, Z-Wave, Wi-Fi, Bluetooth, Cellular, Serial, Analog Dial, and others PA-DSS certification to PCI security compliance Isolates secure network traffic from unsecure traffic for enhanced security Easily upgradable with over the air updates Industry leading 5 year warranty from Systech, a market leader for over 30 years.

Network Availability:     

Verizon AT&T Sprint T-Mobile Rogers

Systech Products:

    

Systech Products IPG-7700 Series IPG-7800 Series IPG-8100 Series SysLink Family

Systech Products (Antenna Sold Separately, 5-Year Warranty) Systech Corporation is an industry leader in the design and manufacture of distributed network conversion, access, gateway, server and switch products for enabling IP communications in existing, non-IP based systems and networks. Its' innovative solutions are deployed in a broad range of worldwide markets spanning electronic transaction, point of sale, retail operations, and industrial and commercial facility management applications. Over 350,000 Systech distributed networking products facilitate mission critical applications worldwide.

You can connect your ATMs wirelessly with secure SSL encryption with a cellular data connection. Enable your ATM to be utilized in mobile applications, temporary installations, or in locations where phone lines or internet connections are not available.

Systech 7700 Series (Antenna Sold Separately)

Systech dial-to-IP gateways permit POS paymentterminals, POS payment controllers, check readers and ATMs to simply and efficiently re-route transactions via a cellular interface to the Internet or private IP network instead of dial up telephone lines. Units can be located conveniently, as no Ethernet wiring is needed. Monthly recurring costs for phone lines may be eliminated in favor of a low cost cellular Internet connection. Costs per transaction may be lowered. Previous invest-ments in credit and debit terminals may be main-tained. Systech Internet Gateways are secure because they use the latest accepted standards for SSL encryption. No changes are required to your existing POS terminals or applications. Quick Comparision:

Datasheet: 

Systech 7700 Series Datasheet

Key features:     

Wirelss (Cellular) Internet Collection Open SSL & 3DES Encryption Multiple Messging Formats POTS and Serial Port Interfaces World-Class Diagnostics

Key Benefits:   

Lower cost IP Transactions No Reccurring Transaction Fees No Changes to POS Applications

Network Availability:  

Verizon Sprint

Systech IPG 7800 Series (Antenna Sold Separately)

Systech dial-to-IP gateways permit POS paymentterminals, POS payment controllers, check readers and ATMs to simply and efficiently re-route transactions via a cellular interface to the Internet or private IP network instead of dial up telephone lines. Units can be located conveniently, as no Ethernet wiring is needed. Monthly recurring costs for phone lines may be eliminated in favor of a low cost cellular Internet connection. Costs per transaction may be lowered. Previous invest-ments in credit and debit terminals may be main-tained. Systech Internet Gateways are secure because they use the latest accepted standards for SSL encryption. No changes are required to your existing POS terminals or applications.

Quick Comparison:

Datasheet: 

Systech 7800 Series Datasheet

Key Features:     

Wirelss (Cellular) Internet Collection Open SSL and 3DES Encryption Multiple Messging Formats POTS and Serial Port Interfaces World-Class Diagnostics

Key Benefits:       

Send Data Over Cellular Networks from difficult to wire location Speed UP Data Transfers SSL Encryption for Sensitive Data Eliminate Phone Lines Lower cost IP Transactions No Reccurring Transaction Fees No Changes to POS Applications

Network Availability:  

AT&T T-Mobile 

 

Systech 8100 Series (Antenna Sold Separately)







Systech Dial-to-Cellular converters are the perfect solution for environmental control, building management, data logging, energy monitoring systems, digital signs, security or any data collection and control system. Our products simply and efficiently re-route data transfers via cellular networks instead of dial up telephone lines. Systems with built-in modems plug directly into the unit’s RJ-11 phone jack. The IPG/8000 converter changes the dial stream to IP and formats it for the IP host. Units can be located conveniently, as no Ethernet wiring is needed. Monthly recurring costs for phone lines may be eliminated in favor of a low cost cellular Internet connection. Costs per transaction may be lowered. Previous investments in credit and debit terminals may be main-tained. Systech Internet Gateways are secure because they use the latest accepted standards for SSL encryption. No changes are required to your existing POS terminals or applications.

Quick Comparison:

Datasheet:



Systech 8000 Series Datasheet

Key Features:  

Send Data Over Cellular Networks from difficult to wire locations No Changes to Data Access and Collection Applications

Key Benefits:  

Speed Up Data Transfers Eliminate Phone Lines

Network Availability:  

Verizon Sprint

Astel, Systech to provide M2M devices across Africa INDUSTRY By BiztechAfrica - June 10, 2013, 6:02 p.m. Image: By BiztechAfrica

Astel (UK) ltd is now distributing Systech’s line of SysLINK M2M Modular Gateways and IPG Internet Payment Gateways into African markets. In addition to providing Machine-to-Machine (M2M) connectivity for multiple applications such as point-of-sale, building automation, security, energy management, mobile

health and vending machines, the Systech® SysLINK™ M2M Gateway enables remote access to a wide variety of sensors and devices for monitoring and control purposes. Worldwide sales for Machine-To-Machine (M2M) devices are predicted to grow to approximately 50 billion devices, and with its wide experience of working in Africa, Astel is well-placed to enable growth of M2M applications across the continent. Yuvraj Jobanputra, Astel’s Managing Director, said: “Systech focus on providing enabling solutions for areas with poor physical connectivity by allowing secure communication over the cell phone network. Combining this technology with our position as a leading distributor of IT products in the region will ensure African businesses have the opportunity to enjoy remote access, regardless of their location.” The key to ing various M2M applications is modularity and flexibility. Unlike other solutions, the modular SysLINK M2M Gateway provides interface slots that may be optionally populated to extend the features and functionality of the gateway. The M2M Gateway is a full-function router, including DH, NAT, VPN, firewall capabilities and enterprise quality remote management. Network configuration options can be changed or updated via remote control. Optional wireless interfaces include Wi-Fi, 2G/3G/4G LTE cellular, ZigBee, Z-Wave, and Bluetooth. Wired interface options include digital I/O ports, serial ports, and analog dialup ports. It is easy to optimize the SysLINK M2M Gateway with the exact required options. It also s upgradability in the field.

Modularly configurable M2M gateways run Angstrom Linux

Systech recently demonstrated the first model in a new series of Linuxpowered M2M (machine-to-machine) intelligent gateways at the Distributech smart grid conference in San Diego. The highly modular SysLink M2M Gateway series enables access to a wide variety of sensors and devices for monitoring and control purposes. According to Systech the gateways implement full-function routers features, including DH, NAT, VPN, and firewall capabilities. Additionally, they’re ed with “enterprise quality” remote management, through which network settings can be configured or changed. The devices are also easily upgradable via over-the-air updates.

The SysLink M2M Gateways target M2M connectivity in point-of-sale, building automation, security, energy management, and mobile health applications. In an effort to as wide a range of M2M applications as possible, Systech designed a high level of both hardware and software modularity and flexibility into the gateway devices.

Systech’s five SysLink M2M Gateway models The gateways’ embedded computing engine was built using a 400MHz ARM926 processor, equipped with 256MB of DDR2 DRAM and 256MB flash memory. The systems are qualified for -10 to +70 deg. C operation. Configurable interface slots The gateways’ hardware modularity comes from the presence of between one and six interface slots, depending on model. These slots can be populated with a selection of wireless communications interfaces (Wi-Fi, 2G/3G/4G LTE cellular, ZigBee, Z-Wave, and Bluetooth) and I/O interfaces (digital, serial, and analog I/O ports). There are four types of slots (types S, P, W, and N), with option cards fitting into one or two different slot types. Besides making it possible to tailor the devices according to the initial requirements of the application, these slots allow for future installation upgrades and enhancements. The number and types of slots available vary among the five SysLink M2M Gateway series models, with the top-of-line SL-4000 having six slots and ing all four cards types, and the low-end SL-0500 having a single slot that s type S cards only (refer to the product’s data sheet for more specifics). Embedded software

On the software side, the SysLink M2M Gateway family’s flexibility starts with a modular embedded Linux platform, based on the small-footprint Angstrom Distribution, and is rounded out by a combination of standard and third-party cloud services. “The embedded Linux operating system provides the power and flexibility required to automatically adjust to individual hardware and software configurations,” explains Systech marketing manager Robert Lutz. “Additionally, custom software may be integrated to provide application-specific, value-added features to provide a truly unique solution.” “The SysLink gateways are able to communicate and bridge a wide variety of protocols and standards, while providing local intelligence to analyze, filter, and take action,” Lutz adds. The SL-1000 began shipping earlier this year, and the other four models in the series are expected to be phased in gradually over the next several months, according to Lutz. For further information, visit Systech’s website.