Td 2c573y

Customer Item number Service Flowserve reference Date

: : : : :

CEPCOLSA CCS-P-3702 A/B Continuo 115701 Version 1 April 30, 2013

Pump size & type Based on curve no. Number of stages

: 2K4x3-13RV M3 ST : MIII7500BV : 1

Capacity Head Specific gravity Pump speed Test tolerance

: : : : :

401.0 USgpm 143.50 ft 1.000 1750 rpm Hydraulic Institute Level A

CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY. MCSF PROVIDES MECHANICAL PROTECTION ONLY. MINIMUM THERMAL FLOW MUST BE CALCULATED FOR THE SPECIFIC FLUID AND OPERATING CONDITIONS.

Copyright © 2009 Flowserve. All rights reserved.

FlowSelex v2.2

1 of 4

Hydraulic Datasheet Customer Customer reference Item number Service

: CEPCOLSA : : CCS-P-3702 A/B : Continuo

Pump / Stages Based on curve no. Flowserve reference Date

Operating Conditions Capacity Water capacity (CQ=1.00) Normal capacity Total Developed Head Water head (CH=1.00) NPSH available (NPSHa) NPSHa less NPSH margin Maximum suction pressure

: : : : : : : :

: : : :

2K4x3-13RV M3 ST MIII7500BV 115701 Version 1 April 30, 2013

/ 1

Materials / Specification

401.0 USgpm 143.50 ft 22.5 ft 4.3 psig

Material column code Pump specification

: D4... : ANSI B73.1 Other Requirements

Hydraulic selection : No specification Construction : No specification Test tolerance : Hydraulic Institute Level A Driver Sizing : Rated Power Seal configuration : Single Seal

Liquid Liquid type Temperature / Spec. Gravity Solid Size - Actual / Limit Viscosity / Vapor pressure

: : : :

Other 160 F 0.6

/ 1.000 / / 4.74 psia Performance

Hydraulic power Pump speed Efficiency (CE=1.00)

: 14.5 hp : 1750 rpm : 62.6 %

NPSH required (NPSHr) : 5.2 ft Rated power : 23.2 hp Maximum power : 33.2 hp Driver power : 30.0 hp / 22.4 kW Casing working pressure : 67.7 psig (based on shut off and Rated specific gravity @ Cut dia) Maximum allowable : 251.0 psig Hydrostatic test pressure : 413.0 psig Est. rated seal chamb. press. : -

Impeller diameter Rated Maximum Minimum Suction specific speed Minimum continuous flow Maximum head @ rated dia Flow at BEP Flow as % of BEP Efficiency at normal flow Impeller dia ratio (rated/max) Head rise to shut off Total head ratio (rated/max)

: : : : : : : : : : : :

12.19 in 13.00 in 9.50 in 7980 US units 130.7 USgpm 146.42 ft 571.1 USgpm 70.2 % 93.8 % 2.0 % 83.3 %

CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY. MCSF PROVIDES MECHANICAL PROTECTION ONLY. MINIMUM THERMAL FLOW MUST BE CALCULATED FOR THE SPECIFIC FLUID AND OPERATING CONDITIONS.

Copyright © 2009 Flowserve. All rights reserved.

FlowSelex v2.2

2 of 4

Construction Datasheet Customer Customer reference Item number Service

: CEPCOLSA : : CCS-P-3702 A/B : Continuo

Pump / Stages Based on curve no. Flowserve reference Date

: : : :

2K4x3-13RV M3 ST MIII7500BV 115701 Version 1 April 30, 2013

Construction Nozzles Suction Discharge

Size 4.00 3.00

Rating 150# 150#

Casing mounting Casing split Impeller type Bearing type (radial) Bearing number (radial) Bearing type (thrust) Bearing number (thrust) Bearing lubrication Rotation (view from lg)

: : : : : : : : :

Casing Impeller Seal chamber Shaft Sleeve

: : : : :

Face RF RF

Foot Radial Rev Sgl Row 6310-C3 Dbl Row 5310-AHC3 Flood CW per Hyd. Institute Materials 316SS (D4/CF8M) 316SS (D4/CF-8M) FML Box / (316SS) ZH/316SS ButtWelded No Sleeve

Baseplate, Coupling and Guard Baseplate type Baseplate material Baseplate size Coupling manufacturer Coupling size Coupling / Shaft guard Shaft / seal guard

: : : : : : :

Type A Founda Steel 258 Baseplate Rexnord Omega ES20 Aluminum (Non-Spark) None Supplied

Pos'n End Top

Manufacturer Power Service factor (req'st / act) Speed Orientation / Mounting Driver Type Frame-size / material Enclosure Hazardous area class Explosion 'T' rating Volts / Phase / Hz Amps-full load/locked rotor Motor starting Insulation Temperature rise Bearings Lubrication Motor mounted by

: : : :

281.0 lb 234.0 lb 455.0 lb 1115.5 lb

/ 36510 cu.in

: Non witnessed : None : None Paint and Package

Pump paint Base grout surface prep Shipment type

: 70.0 : Seal Information

Arrangement Size Manufacturer / Type Material code (Man'f/API) Internal neck bushing

: : : : :

Sgl Int O-Ring 1.875 Flowserve CSX----ECXVNot Available

/ ISC Pusher / BSTFN

Gland

Testing Hydrostatic test Performance test NPSH test

Driver Information : USEM : 30.0 hp / 22.4 kW : 1.15 /: 1800 : / Foot : NEMA : 286T / CAST IRON : TEFC-841 : : : 460 V /3 / 60 : 35.20 A / 211.00 A : : F : : Ball : Grease : Flowserve

Sound Pressure (dBA @ 1.0 m) Driver, expected Pump & driver, estimated

Weights (Approx.) Bareshaft pump(nett) Baseplate(nett) Driver(nett) Shipping gross weight/vol.

/ 1

: Std.Polyurethane : Standard : Export

Gland material Flush Vent Drain Auxiliary seal device

: : : : :

Seal flush plan Seal flush construction Seal flush material Aux seal flush plan Aux seal flush construction Aux seal flush material

: : : : : :

316SS .375" NPT .375" NPT .375" NPT Carbon Bushing

Piping None None -

Notes Mark 3A w/Watchdog oiler Casing w/1/2" Plugged Drain (NPT) -

Copyright © 2009 Flowserve. All rights reserved.

FlowSelex v2.2

3 of 4

Full Page GA Drawing

All dimensions are in inches unless otherwise specified Customer

: CEPCOLSA

Pump size & type

: 2K4x3-13RV M3 ST

Drawing number

: -

Item number

: CCS-P-3702 A/B

Pump speed / Stages

: 1750 rpm / 1

Date

: April 30, 2013

Service

: Continuo

Flow / Head

: 401.0 USgpm / 143.50 ft

Certified by / Date :

: -

Customer PO #

: -

Driver power / Frame

: 30.0 hp / 22.4 kW / 286T

Seal type

: ISC Pusher

Flowserve reference

: 115701 Version 1

Volts / Phase / Hz

: 460 / 3 / 60

Seal flush plan

: None

Copyright © 2009 Flowserve. All rights reserved.

FlowSelex v2.2

4 of 4