Training Report 401h1l

Instruction to document the Summer Training Report 1. The Training report format available here is the Format of the Training

report to be submitted, neither of other format will be approved as completed, if not found strictly as in the given format. 2. The format content “[ ]” at many places where you need to replace

that with your specific project and your personal details. 3. The project Report Contains 10 standard pages (I to X), an section,

Replace the [ ] part with their specific. 4. Do not simply attach tables to increase the bulk of your work. Each

table has to be discussed thoroughly and interpreted. They are essential and they provide a basis and means to understand what you are trying to convey through the tables. 5. Add references for all the data used in the report. 6. The details of font and page and print to be used are as under:

Paper-A4, one side print only Title Font = Cambria, Bold Text Font= Cambria,

Size=14 Size=12

Spacing =1.5 There should not be any change in the front page of the prescribed format. Only the desired information should be filled in, there should be no change in font or what so ever. 7. No. of copies = 3 (One for company, one for the Institute, one personal copy), however in case if company doesn’t demand for their copy then only 2. 8. Consult with the guide for any type of doubt.

(i)

MERI – COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF ECE ENGINEERING Asanda (Near Sampla), Bahadurgarh

SUMMER TRAINING REPORT (Session- 2010-2011)

IN PARTIAL FULLFILLMENT OF BACHELOR OF TECHNOLOGY In [ELECTRONICS AND COMMUNICATION ENGINEERING/ ELECTRICAL AND ELECTRONICS ENGINEERING]

(ii)

BY [NAME AND ROLL NUMBER OF STUDENT]

CERTIFICATE OF THE COMPANY To be given by the concerned authority in the organization where you have done your summer training (on the company letter head) and signed by the company project guide or the authority, Scan the original document and paste (iii)

here, and keep the original copy for future reference.

CERTIFICATE OF THE INSTITUTION

This is certified that [of the student. Roll Number, Branch & Year] has successfully completed the summer training for (iv)

partial fulfillment of the requirement for the award of B.Tech Degree by the University.

This report is the record of authentic work carried out by the student during the academic year 2010-2011.

Signature of Head of the Department Name:

DECLARATION

I, [Name of the student. Roll Number, Branch & Year]hereby declare that this report is the record of authentic work carried out by me during the academic year 2010-2011 in __________________________________________________ (Name of the Company) _________________________________________________________________ (Address of the Company) (v)

( ) Signature of the student ( ) Name of the student

ACKNOWLEDGEMENT

(TO BE WRITTEN AND SIGNED BY THE STUDENT)

(vi)

Abstract

(Write the abstract of the work performed by you.)

(vii)

Index

(viii)

List of figures

(ix)

List of Tables/ Graphs/ Charts (as per required)

(x)

Nomenclature and abbreviations

(xi)

Note: After these standard pages, the following pages will be containing the following chapters: Introductory chapter

- Brief information of the organization (Location, Product/Services, Employee strength, Major customers, Major future plans, organizational

suppliers, chart etc.) -

Project /assignment details

Brief information of the work (Purpose, Scope)

- Methods used (Data collection, Questionnaire, Interviews of key personnel etc.)

CLOSING PAGES: 1.

Analysis, findings, recommendations Scope for future work

Appendices (Documents, Questionnaires etc.) (xii)

2.

Bibliographie

(xiii)