Wps Format Asme Sec.ix 2g2n2m

WELDING PROCEDURE SPECIFICATION (QW-200.1, Section IX, ASME Boiler and Pressure Vessel Code) Welding Procedure Specification No. ing PQR No.(s) Welding Process (es)

: :To be Established :FCAW

Revision No. Revision No. Type (s):

:18th Jan 2013 : ----

:0 Date : - Date Manual

TS (QW-402) t Detail

t Design: Root Spacing: Backing: Backing Material (Type): Retainer:

As Per t Detail As Per t Detail  Yes  No Weld Metal None

 Metal  Non Metallic

 Non fusing Metal  Other

BASE METALS (QW-403) P - No.: 1

Group No.: 2

to OR

P - No.: 1

Group No.: 2

Specification and Type / Grade or UNS Number: To Specification and Type / Grade or UNS Number: OR Chemical Analysis and Mechanical Properties: To Chemical Analysis and Mechanical Properties: Thickness Range (T): Base Metal :Groove: 5 to 32mm Maximum Thickness T ≤ ½ In. (13mm):  Yes Other:

Fillet: Unlimited  No

FILLER METALS (QW-404) 1.

SMAW

2.

NA

3.

NA

Specification No. (SFA) AWS No. (Classification) F – No. A – No. Size of Filler Metal Filler Metal Product Form Supplemental Filler Metal Weld Metal thickness range (t) Groove Fillet t Range for S.Cir.Arc. Method Alloy elements

POSITIONS (QW-405) Position(s) of Groove Welding Progression Position(s) of Fillet Other

POSTWELD HEAT TREATMENT (QW-407) :1G 2G 3G 4G 5G 6G : Uphill  Downhill :1F 1FR 2F 2FR 3F  4F  5F :Not Applicable

Temperature Range Time Range Other

PAGE 01 OF 02

:Not Applicable :Not Applicable :Not Applicable

4.

NA

WELDING PROCEDURE SPECIFICATION (QW-200.1, Section IX, ASME Boiler and Pressure Vessel Code) PREHEAT (QW-405)

GAS (QW-408)

Preheat Temperature, Minimum Inter Temperature, Maximum Preheat Maintenance Other

: 10°C : 300°C : 10°C Min. : Not Applicable

Shielding Trailing Backing Other

: : : :

Percent Composition Gas(es) Mixture CO2 100% NA NA NA NA NA NA

Flow Rate NA NA NA

ELECTRICAL CHARACTERISTICS (QW-409) Heat Input (Maximum) Current or Polarity Other

: : :

Mode of Metal Transfer I & E Range

: :

TECHNIQUE (QW-410) String or Weave Bead Orifice, Nozzle or Gas Cup Size Method of Cleaning Method of Back gouge Oscillation tube to work distance Multiple or Single per side Single to Multiple electrode Electrode Spacing Manual or Automatic Peening Use of thermal process Other Weld Layer(s) or (es)

Welding Process

Prepared By

: String and Weave : : Wire Brush, Chipping, Grinding : Grinding or thermal back gouging : Not Applicable : : Multiple : Single : : Manual : Not Permitted : None : Filler Metal Classification

Electrode Diameter

Current Type and Polarity

Checked By

PAGE 02 OF 02

Amperage

Voltage Range

Travel Speed

Approved By

Remarks