Xl 62421u

10

11 XL SERIES SIMPLEX INLINE & OFFSET BASKET STRAINER

JORD BELLOWS

XL SERIES SIMPLEX INLINE & OFFSET BASKET STRAINER

Inlet / Outlet

XL series strainer inherited all the features from standard simplex strainer series, they specialised in offer extra-large amount of screen area, standard design has 100 times screen area ratio. Where standard simplex strainer series has screen area on, ratio of 10, should satisfy most moderate application, the XL series is best suited where there may be large unknown amount of unexpected particle from upstream, the extra-large design screen will be able to hold the unwanted solid while not blocking the strainer.

Note 3 Note 4

INCH

NB

BODY (NB)

1 2 3 4 5 6 8 10 12 14 16

25 50 80 100 125 150 200 250 300 350 400

150 150 150 150 200 250 300 400 500 600 600

DIM A DIM A1 DIM D DIM D1 DIM F (mm) (mm) (mm) (mm) (mm)

230 705 1488 2507 2992 3443 4938 6113 6937 7021 9230

490 705 1488 2507 2992 3443 4938 6113 6937 7021 9230

153 625 1383 2389 2851 3289 4759 5896 6695 6763 8947

413 439 470 595 703 853 1098 1374 1668 1564 2158

400 416 428 441 517 611 687 769 937 1064 1064

Note 2 Note 3

Note 5&6

DIM F1 DIM H DIM H1 DIM HV DIM Q DIM Q1 Recommended Screen area (mm) (mm) (mm) (mm) (mm) (mm) maximum ratio flow rate, water (m3/h) 729 790 866 1069 1252 1497 1906 2360 2839 2356 3659

491 970 1790 2834 3359 3837 5373 6667 7548 7666 9912

752 970 1790 2834 3359 3837 5373 6667 7548 7666 9912

531 686 1266 2004 2375 2713 3799 4714 5337 5420 7009

395 874 1681 2713 3234 3699 5232 6456 7324 7431 9665

656 874 1681 2713 3234 3699 5232 6456 7324 7431 9665

5.8 22 50 86 135 195 337 531 761 928 1227

25982% 1000% 1000% 1000% 1000% 1000% 1000% 1000% 1000% 1000% 1000%

Drain / vent

Flanged or threaded Flanged or threaded Flanged or threaded Flanged or threaded Flanged or threaded Flanged or threaded Flanged or threaded Flanged or threaded Flanged or threaded Flanged or threaded Flanged or threaded

Note 1. All dimensions are approximate 2. DIM Q and Q1 is clearance required from top opening for basket removal 3. Face to face dimension of STSOBXL 4. Face to face dimension of STSIBXL 5. 8LMWMWRSQMREPVEXMSSJXSXEPWGVIIRWYVJEGIEVIEXSMRPIX WGL GVSWWWIGXMSRWEVIE8S½RHSYXSTIREVIEVEXMS use this value times the open area of the screen of selection. Correct pipe ID area if necessary

<0WIVMIWMWEZEMPEFPIEWMRPMRISVSJJWIXGSR½KYVEXMSR XMSR to best suit your piping arrangement.

Should be 10000%

DIM F1

D

DIM F

IM Q 45°

DIM Q

1

D 1

D

A1

DIM D

IM IM

DIM F

D D IM H 1

DIM A

DIM HV

STSIBXL & STSOBXL