Alstom Micom Agile Manual 3t382j

MiCOM S1 Agile

Release Notes Publication Reference:

© - ALSTOM 2013. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited.

S1Agile/EN/RN/A1

MiCOM S1 Agile

1

Release Notes

MICOM S1 AGILE RELEASE: V1.0.1 This release provides a patch for the installation of Alstom Grid MiCOM S1 AGILE V1.0.1.  MiCOM S1 Agile V1.0.0 must be installed before you can use the patch.  The patch allows you to configure Ethernet-based IEDs that use the latest software version.

S1Agile/EN RN/A1

1

Release Notes

2.

MiCOM S1 Agile

IMPORTANT POINTS WHEN INSTALLING This installation:  is to be ed to your hard disk for later installation by running the .exe file  should be used only if MiCOM S1 Agile V1.0.0. is already installed  retains all existing MiCOM S1 Agile systems, or projects  retains all installed MiCOM S1 Agile data models  does not require any conversion of existing files  can be run multiple times  requires that the has istration rights on their PC

2

S1Agile/EN RN/A1

MiCOM S1 Agile

2

Release Notes

NEW FEATURES Alstom Grid MiCOM S1 AGILE V1.0.1. is a new software patch. It provides the following enhancements compared to MiCOM S1 Agile V1.0.0.

IED Software The patch allows you to configure Ethernet-based IEDs that use the latest version of relay software version.

Ethernet Hot-Standby Configuration The IEC 61850 IED Configurator tool has been upgraded to provide Ethernet hot-standby settings. The current version of IEC 61850 IED Configurator is now V3.1.1.7.

S1Agile/EN RN/A1

3

Release Notes

3

MiCOM S1 Agile

KNOWN ISSUES Legacy tools do not P40 Agile IED USB Connection Legacy MiCOM S1 tools have not been developed to a front USB connection to Agile IEDs.

Installation Warning for P40 Agile USB Drivers P40 Agile USB drivers are signed with a certificate. This causes Windows XP to display a warning indicating that the software does not Windows Logo testing. This warning is normal.

#1689 - USB connection must be re-established to device if host USB port is changed. If a connection to a P40 AGILE device is changed from one USB port to another on the ’s PC, S1 Agile will not automatically use the new COM port that has been created and a new connection to the IED must be made.

#1680 – Sending files in Programmable Curve Tool after device times-out or is rebooted. If a device times out or is rebooted, the Programmable Curve Tool can not send a curve file to the device. A connection can be re-established by ing a curve file from the device.

#341 - Extracting settings files for P632 It is not possible to extract settings files for legacy P632 devices with MiCOM S1 Agile. This is an inherited issue from previous MiCOM Studio releases.

4

S1Agile/EN RN/A1

MiCOM S1 Agile

4

Release Notes

WINDOWS COMPATIBILITY V1.0.1 is compatible with and verified on Windows XP(SP 3) and Windows 7.

The following applications in the S1 AGILE V1.0.1 toolsuite are not verified for Windows 7 compatibility.  WinAEDR2  Device Text Editor (Menu.exe)

To ensure that S1 Agile is displayed correctly using Windows 7 use a (100%) DPI screen size. Select Control > Appearance and Personalization > Display.

V1.0.1 is not fully designed for or verified on Windows 8.

S1Agile/EN RN/A1

5

MiCOM S1 Agile

Release Notes

5

ASSISTANCE

The Alstom Grid Centre is ready to help you 24 hours a day.

6

 email:

[email protected]

 phone:

+44 1785 25 00 70

S1Agile/EN RN/A1

PXXX Product Description

Alstom Grid © - ALSTOM 2013. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited. Alstom Grid Worldwide Centre www.alstom.com/grid/centre/ Tel: +44 (0) 1785 250 070

www.alstom.com