Cofmow Compendium 5n281e
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Cofmow Compendium as PDF for free.
More details w3441
- Words: 5,457
- Pages: 22
INDIAN RAILWAYS CENTRAL ORGANISATION FOR MODERNISATION OF WORKSHOPS (COFMOW)
REVISED ESTIMATED COST OF MACHINERY & PLANT FOR THE FINANCIAL YEARS 2013-14 & 2014-15
ISSUE ON 12.7.2012
Officer
CME(P)
S.No.
Machine Description
Capacity
Machine ID
Spec. No.
Cost in lacs Yr. 2013-14
Cost in lacs Yr. 2014-15
EOT CRANES
i) Estimated cost do not include the cost of DSL (Down Shop lead). The estimated cost per meter length of DSL is :M.S. Angle type= Rs. 2,500/- per meter and shrouded type = Rs. 4,500/- per meter. The Railways/Consignees while sending the indent should add the cost of DSL as per requirement. ii) EOT cranes with VVVF (Variable Voltage Variable Frequency) drive have lower power consumption and are relatively easier to maintain and therefore have lower life cycle cost. In case of consignee opting for VVVF drive, add10%to the initial capital cost of EOT crane. (Recommended for EOT crane of capacity 20 Ton. and above) iii) For additional feature of remote control add Rs. 2.0 lakh to capital cost.
CME(P)
1
EOT CRANE
2TON.
EOT2
COFMOW/IR/EOTC/2012
Rs. 20.00
Rs. 22.00
2 3 4
EOT CRANE EOT CRANE EOT CRANE
3TON. 5TON. 10TON
EOT3 EOT5 EOT10
COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012
Rs. 30.00 Rs.40.00 Rs. 55.00
Rs.33.00 Rs.44.00 Rs. 61.00
5 6 7 8 9 10
EOT CRANE EOT CRANE EOT CRANE EOT CRANE EOT CRANE EOT CRANE
15TON. 20TON. 25TON. 30TON. 35TON 40TON.
EOT15 EOT20 EOT25 EOT30 EOT35 EOT40
COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012
Rs. 65.00 Rs.70.00 Rs.80.00 Rs.85.00 Rs. 90.00 Rs.110.00
Rs. 72.00 Rs.77.00 Rs. 88.00 Rs. 94.00 Rs.99.00 Rs.121.00
50TON. 65TON
EOT50 EOT65
COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012
Rs.150.00 Rs.160.00
Rs.165.00 Rs.176.00
11 EOT CRANE 12 EOT CRANE GOLIATH CRANES 13 GOLIATH CRANE
5TON
GC 5
COFMOW/IR/EOTC/G/5/2009
Rs.72.00
Rs.79.00
GC15
COFMOW/IR/EOTC/G/15/2009
Rs.135.00
Rs.149.00
EOTCUHJ5
COFMOW/IR/EOTC/5T(UNDERH Rs.118.00 UNG JIB)/2003
50 TON.,SPAN,21.5 M
TCC 50
85 TON.SPAN 17.50 M
TCC 85
COFMOW/IR/EOTC/25X2/(TWIN Rs.250.00 CRAB)/2010 COFMOW/IR/EOTC/42.5X2/(TWI Rs.330.00 N CRAB)/2010
100 TON.SPAN 25. M appxox 60TON.SPAN 17.50 M
TCC100
14 GOLIATH CRANE 15TON EOT CRANES WITH UNDERHUNG JIB 15 EOT CRANES WITH 5 TON. UNDERHUNG JIB
CME(P)
Rs.130.00
TWIN CRAB EOT CRANES 16 17 18 19
TWIN CRAB EOT CRANE TWIN CRAB EOT CRANE TWIN CRAB EOT CRANE TWIN CRAB EOT CRANE
TCC 60
COFMOW/IR/EOTC/42.5X2/(TWI Rs.375.00 N CRAB)/2010 COFMOW/IR/EOTC/42.5X2/(TWI Rs.260.00 N CRAB)/2010
Rs.275.00 Rs.363.00 Rs.413.00 Rs.286.00
CME(P)
TRAVERSERS i) Estimated cost do not include the cost of DSL (Down Shop Lead ). The estimated cost per meter length of DSL is : M.S. Angle type= Rs.2,500/- per meter and shrouded type= Rs.4,500/- per meter. The Railways/Consignees while sending the indents should add the cost of DSL as per requirement ii)The estimated cost of DSL with masts is about Rs. 20000/- per meter bay length.The railway while sending the indent shall add the cost per meter requirement . iii) Traversers with VVVF (Variable Voltage Variable Frequency) drives have lower power consumption and are relatively easier to maintain and therefore have lower life cycle cost. In case of consignee opting for VVVF drive, add10%to the initial capital cost of traversers.
CME(P)
PIT TYPE TRAVERSERS 20 PIT TYPE TRAVERSERS 75TON. (2 track) without TRAVP2T75 portal
COFMOW/IR/MH/TRAV/2012
Rs.210.00
Rs.232.00
21
PIT TYPE TRAVERSERS 80TON. (Multi track)
TRAVPMT80
COFMOW/IR/MH/TRAV/2012
Rs.210.00
Rs.232.00
22
PIT TYPE TRAVERSERS 100TON. (Multi track)
TRAVPMT100 COFMOW/IR/MH/TRAV/2012
Rs.220.00
Rs.242.00
TRAVSMT35
COFMOW/IR/MH/TRAV/2012
Rs.100.00
Rs.110.00
SURFACE TRAVERSER 23 SURFACE TRAVERSER 35TON. (Multi track)
24
SURFACE TRAVERSER 50TON. (2track)
TRAVS2T50
COFMOW/IR/MH/TRAV/2012
Rs.170.00
Rs.187.00
25
SURFACE TRAVERSER 70TON. (2track)
TRAVS2T70
COFMOW/IR/MH/TRAV/2012
Rs.195.00
Rs.215.00
CME(P)
CME(P)
26
SURFACE TRAVERSER 80TON. (2track)
TRAVS2T80
COFMOW/IR/MH/TRAV/2012
Rs.220.00
Rs.242.00
27
SURFACE TRAVERSER 80TON. (Multi track)
TRAVSMT80
COFMOW/IR/MH/TRAV/2012
Rs.190.00
Rs.210.00
DIESEL HYD. ROAD MOBILE CRANES
28
ARTICULATING TYPE
8TON.
RMCART8
COFMOW/IR/DH-RMC/ART8T/2011
Rs.12.00
Rs.13.00
29
ARTICULATING TYPE
10 TON.
RMCART10
COFMOW/IR/DH-RMC/ART10T/2011
Rs.13.00
Rs.14.00
30
ARTICULATING TYPE
12 TON.
RMCART12
COFMOW/IR/DH-RMC/ART12T/2011
Rs.15.00
Rs.17.00
31
ARTICULATING TYPE
15TON.
RMCART15
COFMOW/IR/DH-RMC/ART15T/2011
Rs.25.00
Rs.28.00
32
FULL SLEW TYPE
10 TON.
RMCSLEW10
Rs.95.00
Rs.105.00
33
FULL SLEW TYPE
12TON.
RMCSLEW12
COFMOW/IR/DH-RMC/SLEW 10T/2011 COFMOW/IR/DH-RMC/SLEW –12T/2011
Rs.100.00
Rs.110.00
34
FULL SLEW TYPE
15TON.
RMCSLEW15
COFMOW/IR/DH-RMC/SLEW –15T/2011
Rs.110.00
Rs.121.00
35
FULL SLEW TYPE
16TON.
RMCSLEW16
Rs.120.00
Rs.132.00
36
FULL SLEW TYPE
18TON.
RMCSLEW18
Rs.130.00
Rs.143.00
37
FULL SLEW TYPE
20TON.
RMCSLEW20
COFMOW/IR/DH-RMC/SLEW –16T/2011 COFMOW/IR/DH-RMC/SLEW –18T/2011 COFMOW/IR/DH-RMC/SLEW –20T/2011
Rs.150.00
Rs.165.00
38
FULL SLEW TYPE
40TON.
RMCSLEW40
COFMOW/IR/DH-RMC/SLEW –40T/2011
Rs.240.00
Rs.264.00
SYNCHRONISED LIFTING JACKS 39
SYNCHRONISED 15 TON. LIFTING JACKS ELECTRICAL OPERATED SCREWJACKS (SET OF 5 JACKS)
SJE 15
COFMOW/IR/SJE/15/2012
Rs.28.00
Rs.30.00
40
SYNCHRONISED 25TON. LIFTING JACKS ELECTRICAL OPERATED SCREWJACKS (SET OF 5 JACKS)
SJE 25
COFMOW/IR/SJE/25/2012
Rs.30.00
Rs.33.00
41
35 TON. SYNCHRONISED LIFTING JACKS OPERATED ELECTRICALSCREW JACKS (SET OF 5 JACKS) SYNCHRONISED 45 TON. LIFTING JACKS ELECTRICAL OPERATED SCREWJACKS (SET OF 5 JACKS)
SJE 35
COFMOW/IR/SJE/35/2012
Rs.35.00
Rs. 39.00
SJE 45
COFMOW/IR/SJE/45/2011
Rs.75.00
Rs.83.00
42
LOADERS 43
TRACK LOADER (BACKHOE TYPE)
1.85 CUM
TL
COFMOW/IR/TL/1.85/’1996
Rs.183.00
Rs.201.00
44
CRAWLER LOADER
1.6 CUM
CWL
COFMOW/IR/TL/1.6/’1996
Rs.225.00
Rs.248.50
45
FRONT END LOADER
0.7 CUM
FELO.7
COFMOW/IR/FEL/0.7/’2000
Rs.20.00
Rs.22.00
46
FRONT END LOADER
1.0 CUM
FEL1.0
COFMOW/IR/FEL/1.0/’2001
Rs.35.00
Rs.39.00
47
FRONT END LOADER
1.7 CUM
FEL1.7
COFMOW/IR/FEL/1.7/’2001
Rs.45.00
Rs.50.00
48
LOADER CUM EXCAVATOR SKID STEER LOADER
1.0/0.18 CUM
FELCE/1.0/0.1 COFMOW/IR/FELCUM Rs.42.00 8 EXCAVATOR/1.0/0.18/1600/2009 SSL COFMOW/IR/SSL/700/0.35/2002 Rs.22.00
Rs.46.00 Rs.24.50
AIRBAG55
COFMOW/IR/AIR BAG/2009
Rs.8.00
Rs.9.00
AIRBAG130
COFMOW/IR/AIR BAG/2009
Rs.25.00
Rs.28.00
LWET
COFMOW/IR/Light weight elect. Tools/2005
Rs.8.00
Rs.9.00
COFMOW/IR/Synthetic Packing/2007
Rs.1.10
Rs.1.20
49
CME(P)
0.35 CUM
DISASTER MANAGEMENT 50 51
INFLATABLE AIR BAG 55TON (RECTANGULAR TYPE) INFLATABLE AIR BAG 130TON (ROUND TYPE) 1SET OF 2NOS.
52
LIGHT WEIGHT ELECTRIC TOOLS SET
53
SYNTHETIC PACKING 1000X 300X 250mm ,1000X 300X 200mm , 1000X 300X100mm
54
UNDERWATER CUTING EQUIPMENT
UW CUTTING COFMOW/IR/Underwater cutting/2005
Rs.7.00
RS.8.00
55
WATER MIST FIRE FIGHTING EQUIPMENT (BACKPACK TYPE)
WMFF
COFMOW/IR/Water Mist Fire Fighting/2008
Rs.7.00
Rs.8.00
56
INFLATABLE TENT
ITENT
COFMOW/IR/Inflatable tent/2005
Rs.10.00
Rs.11.00
HRD
COFMOW/IR/HRD/2010
Rs .22.00
Rs.24.00
HRE
COFMOW/IR/RRE/2009
Rs. 63.00
Rs. 70.00
RRV
COFMOW/IR/RRV(With crane cum HRD & Fire Fighting)/2005
600T
RRVS
75T
ONE SET (Consisting of SPACK 1 No. of each size)
57
HYDRAULIC RESCUE DEVICE (IMPORTED) 58 HYDRAULIC RERAILLING EQUPMENT RAIL CUM ROAD VEHICLE 59
RAIL CUM ROAD VEHICLE WITH CRANE,HRE,HRD, FIRE FIGHTING EQUIPMENT
60
RAIL CUM ROAD VEHICLE (SHUNTING VEHICLE)
Rs.1150.00
Rs.1250.00
COFMOW/IR/600T/2007
Rs.300.00
Rs.330.00
BD
COFMOW/IR/BD/2007
Rs.350.00
Rs.385.00
SSTS
COMOW/IR/SSTS/2009
Rs.130.00
Rs.143.00
BULLDOZER 61
DIESEL HYD. BULLDOZER SHELL SKIN TENSONING 62 DY.CEE
SHELL SKIN TENSONING
ELECTRICAL EQUIPMENTS 63
DYNAMIC BALANCING MACHINE
3000 Kg.
DBM 3000
COFMOW/IR/DYN BAL3000/2011
Rs.18.00
Rs.19.80
64
DIESEL GENERATATING SETS
160KVA
DGS160
COFMOW/IR/DG Set/AMF-2010
Rs.14.59
Rs.16.50
DY.CEE
65
DIESEL GENERATATING SETS
250KVA
DGS250
COFMOW/IR/DG Set/AMF-2010
Rs.20.50
Rs.22.40
66
DIESEL GENERATATING SETS
320KVA
DGS320
COFMOW/IR/DG Set/AMF-2010
Rs.24.30
Rs.26.70
67
DIESEL GENERATATING SETS
500KVA
DGS500
COFMOW/IR/DG Set/AMF-2010
Rs.38.50
Rs.42.40
68
TRANSFORMER OIL FILTRATION PLANT
3000LPH
HVTOP 3000
COFMOW/IR/ HVTOP/2011
Rs.16.50
Rs.18.00
69
TRANSFORMER OIL FILTRATION PLANT
5000LPH
HVTOP 5000
COFMOW/IR/ HVTOP/2011
Rs.19.50
Rs.21.50
70
STATIC WEIGH BRIDGE 100MT (RAIL)
RWB100
COFMOW/IR/WB/ 2011
Rs.22.25
Rs.24.50
71
STATIC WEIGH BRIDGE 100MT (ROAD)
RDWB100
COFMOW/IR/WB/ 2011
Rs.19.00
Rs.21.00
72
STATIC WEIGH BRIDGE 100MT (RAIL CUM ROAD)
RRWB100
COFMOW/IR/WB/ 2011
Rs.21.00
Rs.23.00
73
SEMIAUTOMATIC SUBMERGESD ARC WELDING PLANT
SWP
COFMOW/IR/SEMI/SAW/1000Am Rs.19.50 p/2008 9Rev.-1)
Rs.21.50
74
Wheel IMPACT LOAD INDIGENOUS DEFLECTION(INDIGENO US)
WILD
COFMOW/IR/WILD/2006
Rs.100.00
Rs.110.00
75
WHEEL IMPACT LOAD DEFLECTION (IMPORTED)
WILDIM
COFMOW/IR/WILD/2006
Rs.360.00
Rs.395.00
76
VACCUM DRYING PLANT
VDP
COFMOW/IR/VPIP/2000
Rs.46.30
Rs.51.00
77
Inverter Baed MIG MAG Synergic Pulse Welding Plant, Air cooled torch
400 Amp
PMIGW400
COFMOW/IR/Pulse/WP/2010
Rs.3.92
Rs.4.32
78
Inverter Baed MIG MAG 450 Amp Synergic Pulse Welding Plant, Water cooled torch
PMIGW400
COFMOW/IR/Pulse/Water cooled/RF/WP/2010
Rs..4.85
Rs.5.32
79
Inverter based MIG MAG 450 Amp Synergic Welding Plant, Air cooled torch
PMIGW450
COFMOW/IR/Synergic/WP2011
Rs.2.80
Rs.3.10
80
Inverter Based MIG450 Amp MAG/MMA Welding plant
SAWPINV
COFMOW/IR/Synergic/WP(MIG MAG-CO2)2007
Rs.8.60
Rs.9.45
81
Semi Automatic CO2 MIG 400Amp MAG Welding Plant with BOOM
SAWPINV
COFMOW/IR/Synergic/WP(MIG MAG-CO2)/2007
Rs.8.60
Rs.9.45
82
Semi Automatic CO2 MIG 400 Amp MAG Welding Plant with MCAW Process
SAWP/PUL
COFMOW/IR/Synergic/WP (MIG MAG-CO2)2007
Rs.9.10
Rs.9.95
1000AMP
IMPOERTED
83
Tig Welding Plant
84
350 Amp
TWP
COFMOW/IR/AC-DC/TIGWP/2011 Rs.8.25
Rs.9.10
Commutator Tig Welding machine
CTWM
COFMOW/IR/ARM TIG/WP/2011
Rs.46.15
Rs.51.00
85
Test Console for Testing DC Traction Motor for NO Load Tst
TMTCNL
COFMOW/E/TMTC/NO LOAD2011
Rs.23.50
Rs.26.00
86
Test Console for Testing DC Traction Motor for ON Load Test
TMTCOL
COFMOW/E/TMTC/ LOAD-2011
Rs.69.50
Rs.76.20
87
Spot Welding Plant
WMS
COFMOW/IR/SPOT/WELD/99
Rs.53.50
Rs.59.00
TRACTION MOTOR SHOP MACHINES Dy.CME-I
AXLE SHOP MACHINE 88
CYLINDRICAL AXLE GRINDING MACHINE (INDIGENOUS CNC)
Length-3000mm.max. Dia-300mm max.
CNCAGM
COFMOW/IR/MT/AG-3/2005-Rev- Rs.400.00 II
Rs.440.00
89
CNC AXLE TURNING LATHE IMPORTED
Surface finish= 0.8 micron Ra(min.)
CNCATLIMP
COFMOW/IR/CNC/ATLIII/3000X600/2006Rev.-II/2010
Rs.716.00
Rs.788.00
90
CNC AXLE TURNING LATHE IDIGENOUS
Surface finish1.6 micron CNCATLIND to3.2 micron
COFMOW/IR/CNC/ATL/3000x300/ Rs.200.00 2006 (Rev-II)/2010
Rs.220.00
91
DOUBLE END MILL AND Length of comp. 300mm DEMC CENTRE M/C to 1250mm /diameter of comp. 25mm to 125mm
COFMOW/IR/FCDT/2005
Rs.100.00
Rs.110.00
92
HORIZONTAL DRILLING Length of axle 2700mm DTMH & TAPPING MACHINE max. & 2200mm min. SINGLE ENDED diameter of axle 300mm & 100mm
COFMOW/IR/CDT/AXLE/2005
Rs.121.00
Rs.133.00
93
AJTB (BG)
Track gauge 1676mm, tread dia 1225-750mm, axle length 26502200mm
COFMOW/IR/MT/JTB-3-R5/2004
Rs.194.00
Rs.213.00
94
AJTB (BG/MG/NG)
AJTBBGMGN Track gauge 1676762mm, tread dia 1225- G 495mm, axle length 26501100mm
COFMOW/IR/MT/JTB/BG/MG&N G/2008
Rs.199.00
Rs.219.00
95
AJTB (BG/MG)
Track gauge 1676-1000, AJTBBGMG tread dia 1225-600mm, axle length 26501500mm
COFMOW/IR/MT/JTB7/98/Rev.I/2005
Rs.196.00
Rs.216.00
Screen diameter 500mm OPP magnification
COFMOW/IR/OPP/2002
Rs.21.00
Rs.23.00
AJTBBG
METROLOGICAL INSTRUMENT 96
OPTICAL PROFILE PROJECTOR (VERTICAL TYPE)
FLOOR CLEANING MACHINE
97
INDUSTRIAL VACUUM 1800mm sweep SWEEPER WITH CABIN
IVS
COFMOW/IR/IVS/2006/Rev.II
Rs.57.00
Rs.62.00
LAPCH
COFMOW/IR/Cyl. Head lap/2004/Rev-II/2010
Rs.30.00
Rs.33.00
COFMOW/IR/Bar Peeling Machine/2003
Rs.631.00
Rs.693.00
TMML
COFMOW/IR/Laser Tool Marking/2003
Rs.91.00
Rs.100.00
BO
COFMOW/IR/Baking Oven/Rly. Coach/2004
Rs.206.00
Rs.226.60
LAPPING MACHINE 98
CYLINDER HEAD LAPPING MACHINE
BAR PEELING MACHINE 99
BAR PEELING M/C
Bar dia 16-60mm length PLMB
TOOL MARKING MACHINE 100
LASER TOOL MARKING MIN. 10 W DIODE MACHINE PUMP SOLID TYPE MULTIMODE ND YAG LASER 110X110MM RANGE PAINTING EQUIPMENT 101
BAKING OVEN FOR RLY. ENGER COACH
Size (max.) length-30m Width-10m Height-11m (on turnkey basis)
102
SURFACE PAINTING BOOTH FOR RLY. ENGER COACH
Internal size 31m(L)x 7m PB (W)x 6m (H) max
COFMOW/IR/Surface Painting Booth/enger Coach/2002
Rs.434.00
Rs.478.00
103
COMPLETE PAINTING SYSTEM FOR RLY. ENGER COACH
(i) SPRAY BOOTH-1 no. PBDO ext. size 30M(L)x10m(W)x 11(H) (ii) DRYING OVEN-01 no.
COFMOW/IR/PB&BO/Rly. Coach/2007
Rs.951.50
Rs.1046.65
104
PRIMARY PAINTING PLANT FOR RAIL COACH SPRING (DIP PAINTING TYPE)
PPP
COFMOW/IR/Primary Paint Plant/Coil Spring/2003
Rs.271.70
Rs.293.87
APCM
COFMOW/IR/CNC/APCM/Portal/3 Rs.136.00 000x6000/2/KRev.I/2005 (Turn key)
Rs. 150.000
PROFILE CUTTING MACHINES
DY CME-I
105
CNC AIR PLASMA CUTTING MACHINE
1x32x6000x3000
106
CNC AIR PLASMA 3 torch x32x9000x3500. APCM 3T CUTTING MACHINE (3 torch, imported machine)
COFMOW/IR/CNC/APCM/Portal/3 Rs.450.00 000x6000/2/KRev.II/2008 (Turn key)
Rs. 500.00
107
CNC GAS PROFILE CUTTING MACHINE
4 Torch 75mm thickness CNCGPCM
COFMOW/IR/PGCM/Portal/3000/9 Rs.70.00 9/Rev.III/2007
Rs.77.00
108
CNC LASER CUTTING MACHINE
109
CNC LASER CUTTING MACHINE
4KW , Thickness20mm(MS),16mm (Corten steel), 10mm(SS) Table size- 3000(W)X (12000+1200) (L) 4KW, Thickness20mm(MS),15 MM (Corten steel), 8mm(SS)Sheet size4000mmX2000mm
110
CNC LASER CUTTING MACHINE
CNCLCM 3000 COFMOW/IR/Laser CuttingII/2005
Rs.1168.00
Rs.1284.00
CNCLCM4000 COFMOW/IR/Laser CuttingII/2001/Rev-I/2008
Rs.900.00
Rs.990.00
Rs.1250.00
Rs.1375.00
5KW ThicknessCNCLCM6500 COFMOW/IR/ Laser Cutting22mm(MS),15mm II/2001/Rev-I/2008 (Corten steel), 8mm(SS) Sheet size- 6000mm X3000mm
111
112
113
CNC LASER CUTTING & Max. sheet size 2mx4m WELDING MACHINE Thickness 0.8-3mm MACHINE BED SIZE 6X2.5 MM GAS PROFILE 4 Torch Thickness= CUTTING MACHINE 100mm
CNC LW&CM
COFMOW/IR/Laser cutting & welding/2004/Rev-I/2008
GPCM
COFMOW/IR/PGCM/Cantiportal/9 Rs.21.00 2-R4/2004 (Turnkey)
Rs.23.00
CNLASMA PROFILE CUTTING MACHINE (UNDER WATER)
Pipe dia 10-90mm, pipe thickness 4mm, length 6mtr.
PCMUW
COFMOW/IR/CNC//APCM/UNDE Rs.500.00 R WATER/2007
Rs.550.00
2 no. of robots, welding fixtures and welding positioner
RBWM
COFMOW/IR/WLD/ Robot /2004 / Rs.689.70 Rev.I /2007
Rs.758.67
RBWM – EB
COFMOW/IR/WLD/Robot /DMW /R-1/2007
Rs.825.00
Rs.2500.00
Rs.2750.00
DY.CME-I ROBOTIC WELDING 114
Bogie bolster and bogie frame welding machine
115
Robotic Welding Machine For loco engine block, 1 for engine block no. of Robot, 1 work positiioner
Rs.754.30
SURFACE PREPARATION SYSTEM 116
BEAD BLASTING MACHINE
117
AIRLESS CENTRIFUGAL GRIT BLASTING PLANT 2 TURBINE WHEEL, INLET & EXIT POWERISED ROLLER
118
AIRLESS CENTRIFUGAL SHOT BLASTING PLANT 4 TURBINE WHEEL, INLET & EXIT POWERISED ROLLER
119
Dia of table 1200mm BBCL load cap. 500kg. No. of satellite on main indexing turn table-4
COFMOW/IR/Bead Blast/ Cylinder Rs.55.00 Liner/2002
Rs.61.00
CSBP(2TUR)
COFMOW/IR/GBP/2003
Rs.78.00
Rs.86.00
CSBP(4TUR)
COFMOW/IR/SBP/2002/Rev-I/ 2005
Rs.90.00
Rs.99.00
AIRLESS CENTRIFUGAL Spring diameter 70CSSB SHOT BLASTING PLANT 400mm Free height 150FOR COIL SPRING 700mm Weight of Spring 3.3-80kg.
COFMOW/IR/CS/SB/97(RevII)2003/2007
Rs.55.00
Rs.61.00
120
GRIT BLASTING PLANT Job size GBPBF FOR BOGIE FRAME 4244x2947x800mm Max. (AIRLESS ROTOR wt.-1500kg. TYPE)
COFMOW/IR/Bogie Frame/SB/2003/Rev-I/2004
Rs.125.00
Rs.140.00
121
GRIT BLASTING PLANT Cabinet size FOR DIESEL ENGINE 1mx1mx1.5m(H) CYLINDER LINERS
COFMOW/IR/SBP/2/94 Rev.I/2003
Rs.33.00
Rs.36.00
122
RAIL SHOT BLASTING RSBM MACHINE SHOT BLASTING PLANT Table diameter 1200mm, RTSBM 1200 (SWING TABLE TYPE) table speed 4 to 5RPM
COMOW/IR/RSBM/2002
Rs.79.00
Rs.87.00
COFMOW/IR/RTSBM/2003/RevIII/2010
Rs.24.00
Rs.27.00
124
SHOT BLASTING PLANT Table diameter 1800mm RTSBM 1800 (SWING TABLE TYPE) table speed 3-4RPM
COFMOW/IR/SBM /Swing table- Rs.33.00 1828mm (72inch) 2003/Rev-I/2005
Rs.37.00
125
SHOT BLASTING PLANT Table diameter 2400mm RTSBM 2400 (SWING TABLE TYPE) table speed 3 to 4RPM
COFMOW/IR/SBM/Swing Table96 inch/r-2/2006
Rs.44.00
123
GBPDSL
Rs.40.00
126
COMBINED AIRLESS CENTRIFUGAL SHOT BLASTING & SHOT PEENING PLANT FOR COIL SPRING & LAMINATED SPRING COIL
127
COACH SHOT BLASTING PLANT (AIRLESS ROTOR TYPE WITH 16 ROTORS)
THREADING MACHINES 128 SCREWING/BOLT OR PIPE THREADING MACHINE
129
CNC Pipe Bending machine
Coil spring diameter-70 SB&PM to 475mm/ Max. length of laminated spring-1862 mm/ free height-150 to 900mm /Max. width of laminated spring-120mm
SBP(COACH)
Bolt Cap-1/4”-4” PipeCap- TMPB 1/4”-4”
Pipe dia 10-90mm, pipe thickness 4mm, length 6mtr.
COFMOW/IR/CS/SP/97/RevI/2006
Rs.82.00
Rs.90.00
COFMOW/IR/Shot Blast/Rly.Coach/2002/rev-II/2009
Rs.660.00
Rs.716.00
COFMOW/IR/ Screwing/2006
Rs.43.00
Rs.47.00
Rs.198.00
Rs.217.00
CNBM(PIPE COFMOW/IR/Pipe Bending ) (CNC)/90mm/2008
DY.CME-I TRACTION MOTOR SHOP MACHINES 130
ARMATURE BINDING MACHINE
BMA
COFMOW/IR/MT/ABM/1/90/Rev-I Rs. 61.00
Rs.67.00
131
FULLY AUTOMATIC COMMUTATOR MICA UNDER CUTTING & DEBURRING M/C
CMUM
COFMOW/IR/MT/AMUD/R299/(Rev-2)/2006
Rs.55.00
Rs.61.00
132
COMMUTATOR TURNING & POLISHING
CT&P
COFMOW/IR/MT/CTL-2/97/RevII/2009
Rs.71.00
Rs.78.00
133
UNIVERSAL MULTIPURPOSE ARMATURE MACHINE
UAM
COFMOW/IR/MT/UAM-1-90/Rev- Rs.95.00 V/ 2007 (turnkey)
Rs.102.00
TURNING CENTRE 134
HEAVY DUTY TURNING Turning diameterTLHD LATHE 1500mm Turning length3000mm
COFMOW/IR/CL-3000X1500/2005 Rs.85.00
Rs.94.00
135
CNC UNDER FLOOR WHEEL LATHE (BG)
WITHOUT SHED
WLU(BG)
COFMOW/IR/M/CNC-UFWL(BG)/2011
Rs.475.00
Rs.500.00
136
CNC UNDER FLOOR WHEEL LATHE (BG)
WITH SHED
WLU(BG)
COFMOW/IR/M/CNC-UFWL(BG)/WITH WORKS/2011
Rs.600.00
Rs. 650.00
137
CNC UNDER FLOOR WHEEL LATHE (BG CUM MG)
WLU(BG&MG) COFMOW/I/M-UFWL/(BG&MG)/ 2004
Rs500.00
Rs.525.00
138
RECONDITIONING OF UNDER FLOOR WHEEL LATHE (BG)
RCWLUF (BG) COFMOW/IR/M-UFWL(BG)/REC /2006
Rs.246.00
Rs.270.00
AXLE BOX CLEANING PLANT BOGIE (BG) WASHING PLANT
AB
COFMOW/IR/M/ AB-/2011
Rs.202.00
Rs.222.00
BC
COFMOW/IR/M-BWP/2001
Rs.702.00
Rs772..00
COACH WASHING PLANT
CW
COFMOW/IR/M-CWP/2010
Rs.605.00
Rs.665.00
DY.CME-II CLEANING AND WASHING PLANTS 139 140 141
142
BEARING CLEANING PLANT 143 *ENGINE BLOCK WASHER VERTICAL TURNING LATHES 144 CNC VERTICAL TURNING LATHE FOR WHEEL MACHINING 145
Table dia 1400mm For wheels
RB
COFMOW/IR/M/B/2012
Rs.385.00
Rs.423.00
EBW
COFMOW/IR/EBW/ 2011
Rs.660.00
Rs.726.00
CNCVTL1400
COFMOW/CNC/ VTL-WM-1400/ 2012
Rs.300.00
Rs.330.00
CNC VERTICAL TURNING LATHE CNC VERTICAL TURNING AND BORING MACHINE & WHEEL HANDLING SYSTEM WITH CONVEYORS AND MANIPULATOR
Table dia 800mm for CNCVTL800 components Table dia 1400 mm (For CNC VTBM RWF)
COFMOW/IR/CNC/VTL-800/2010 Rs.355.00
Rs.391.00
COFMOW/IR/CNC/VTBM1600/2007
Rs.643.50
Rs.707.85
NON CNC VERTICAL TURRET LATHE
Table dia 1500mm
VTL1500
COFMOW/VTL/1500/2012
Rs.252.00
Rs.277.00
NON CNC VERTICAL Table dia 1400mm TURRET LATHE FOR WHEEL MACHINING DY.CME-II BOILERS AND FURNACES 2000kg./hr. 149 OIL FIRED BOILER 4000kg./hr. 150 OIL FIRED BOILER 151 OIL FIRED BOGIE Cap 2.5 Ton HEARTH FURNACE FOR STRESS RELIVING
VTL1400
COFMOW/IR/VTL/WM-1400/2012 Rs.229.00
Rs.250.00
OFB2000 OFB4000 BHF2.5T
COFMOW/IR/M-OFB/2000/2002 COFMOW/IR/M-OFB/4000/2011 COFMOW/IR/OFF/ BOGIE/SRF/2011
Rs.77.00 Rs.85.00 Rs116.00
Rs.85.00 Rs.94.00 Rs.127.00
146
147
148
152
OIL FIRED BOGIE Cap.5 Ton HEARTH FURNACE FOR STRESS RELIVING
BHFF5T
COFMOW/IR/OFF/ BOGIE/SRF/2011
Rs.121.00
Rs.133.00
153
OIL FIRED BOGIE Cap.10TON HEARTH FURNACE FOR STRESS RELIVING
BHF10T
COFMOW/IR/OFF/ BOGIE/SRF/2011
RS.160.00
RS.175.00
154
OIL FIRED BOGIE Cap12 Ton HEARTH FURNACE FOR STRESS RELIVING
BHF12T
COFMOW/IR/OFF/ BOGIE/SRF/2011
Rs.193.00
Rs.212.00
SIMIM
COFMOW/IR/M-SIM-2007(Rev-1) Rs.1723.00
Rs.1895.00
PL(Heavy) Length - 14000mm Width - 1600mm, (2NOS PLANING, 1NO MILLING & 1 NO GRINDING HEAD) Length- 4500mm Width- PL 1600mm,(2 nos. planing, 1 no. milling & 1 no. grinding heads)
COFMOW/IR/PL/14000X1600/200 Rs.403.00 4
Rs.443.00
COFMOW/IR/PL/4500X1600/2006 Rs.399.00
Rs.439.00
COFMOW/IR/IP/PSM/2010
Rs.968.00
Rs.1065.00
COFMOW/IR/M-PSM/2010
Rs.424.00
Rs.466.00
SIMULATOR 155 SIMULATORS IN MOTION TYPE PLANNER MACHINE 156
DOUBLE COLUMN PLANING MACHINE
157
DOUBLE COLUMN PLANING MACHINE
DY.CME-II STRAGHTENING MACHINES 158
PLATE STRAIGHTENING MACHINE
Plate thickness (1025mm & width 2500mm P441n/mm2 (S.S)
159
PLATE STRAIGHTENING MACHINE
Plate thickness 8-16mm PSM(8-16) & width 1250mm (M.S)
PSM(10-25)
160
PLATE Plate thickness 05-20mm PSM(5-20) STRAIGHTENING & width 2500mm , MS-IS MACHINE 2062 161 RAIL STRAIGHTENING RSM MACHINE PLATE BENDING MACHINES 162 CNC PROFILE BENDING CNB
COFMOW/IR/PSM/2010
Rs.470.00
Rs.517.00
COFMOW/IR/RSM/1999
Rs.146.00
Rs.161.00
COFMOW/IR/PBM/2011
Rs.1500.00
Rs.1650.00
COFMOW/IR/HPB/PBM/2010
Rs.280.00
Rs.307.00
163
HYDRAULIC PLATE BENDING MACHINE
600mm x 1250mm Top roll pressure- 600 T
HYDPBM
164
HYDRAULIC PLATE BENDING MACHINE
i) Corten steel(UTS440MPa)-1.5-10 mm ii)SS(UTS-860 MPa- up to 4 mm Width 2750mm
HYDPBM(1.5- COFMOW/IR/HPB/PBM/2010 10)
Rs.61.00
Rs.67.00
HP200(4COL) COFMOW/IR/M/ HP/200/1987
Rs.70.00
Rs.77.00
Rs.68.00
Rs.75.00
HYDRAULIC PRESSES 165 HYD. PRESS 4 COLUMN CAP 200T (W/O TOOLING) 166
HYD. PRESS 4 COLUMN CAP. 300T (W/O TOOLING)
HP300(4COL) COFMOW/IR/C-50/4C100,300/2010
167
HYD. PRESS 4 COLUMN CAP 500T (W/O TOOLING)
HP500(4COL) COFMOW/IR/M/HP/4C-500T/C- Rs.114.00
168
HYD. PRESS 4 COLUMN CAP 500T (W/O TOOLING) 2 CYL. OF 250 T
HP500(4COL) COFMOW/IR/HP- 4C/2 cyl.500T/2011
Rs.212.00
Rs.232.00
169
HYD. PRESS 4 COLUMN CAP 100T (W/O TOOLING)
HP100(4-COL) COFMOW/IR/M/ HP/2009
Rs.35.00
Rs.38.00
170
HYD. PRESS ‘C’ FRAME CAP 100T (W/O TOOLING)
HP100 ( C)
COFMOW/IR/M/ HP/2009
Rs.30.00
Rs.33.00
171
HYD. PRESS ‘C’ FRAME CAP 200T (W/O TOOLING)
HP200 ( C)
COFMOW/IR/M/ HP/2009
Rs.38.00
Rs.42.00
172
HYD. HORIZONTAL PRESS( C-FRAME)
HPSEMIAUTO COFMOW/IR/C-50,100,200/2011 200
Rs.35.00
Rs.39.00
173
HYD. PRESS ‘C’ FRAME CAP 50T (W/O TOOLING)
HP50 (C )
COFMOW/IR/C-50,100,200/2011
Rs.13.00
Rs.16.00
174
HYD. PRESS 4 COLUMN CAP 1000T FOR BOGIE STRAIGHTENING
HP1000 (4COL)
COFMOW/IR/1000T/ST.PRESS/2 Rs.540.00 011
Rs.595.00
CAP 63T
TP63
COFMOW/IR/TP/63/2000
Rs.44.00
Rs.48.00
CAP 30T
TP
COFMOW/IR/PPM/30T/1999
Rs.28.00
Rs.30.00
CAP 200T
TP200
COFMOW/IR/MTP/HF/200T/2007 Rs.70.00
Rs.77.00
CAP 200T
EP
COFMOW/IR/EP-200T/2011
Rs.83.00
WLS
COFMOW/CNC/SWL/BG/2 Rs.561.00 (WITHOUT 012 (Rev. 1) (with AMC)
Rs.617.00 (WITHOUT AMC CHARGES)
COFMOW/CNC/SWL/BG/2 Rs.611.00 (WITHOUT 012 (Rev. 1) (with AMC)
Rs.661.00 (WITHOUT AMC CHARGES)
CAP 200T
Rs.125.00
200T /2011
DY.CME-II TRIMMING PRESSES 175 176 177 178
TRIMMING PRESS (MECHANICAL) TRIMMING PRESS (MECHANICAL) TRIMMING PRESS (MECHANICAL) ECCENTRIC PRESS (W/O TOOLING)
Rs.76.00
WHEEL LATHES
DY.CME-II 179
CNC SURFACE WHEEL WITH PROBE TYPE LATHE (BG) MEASUREMENT
AMC CHARGES)
180
CNC SURFACE WHEEL WITH LASER BASED LATHE (BG) MEASUREMENT & BRAKE DISC MACHINING
DY.CME-II WHEEL PRESS
WLS
AMC CHARGES)
181
DY.CME II
DY.CME II
DY.CME II
HYD. WHEEL PRESS (BG CUM MG)
CAP 500T
WP500
COFMOW/IR/M-HWP/2011
Cap. (T)- 200T
CNB 200
COFMOW/IR/CNC HPB/200/2012 Rs.133.00
Rs.146.00
Cap. (T)- 400T
CNB 400
COFMOW/IR/CNC HPB/400/2012 Rs.202.00
Rs.227.00
Cap. (T)- 650T
CNB 650
COFMOW/IR/HPB/640/2007
Rs.300.00
Rs.330.00
Cap. (T)- 800T
CNB 800
COFMOW/CNCHPB 800T/2012
Rs.400.00
Rs.440.00
Cap. (T)- 80T
PB 80
COFMOW/IR/HPB/80 & 200/2010 Rs.42.00
Rs.46.00
Cap. (T)- 200T
PB 200
COFMOW/IR/HPB/80 & 200/2010 Rs.91.00
Rs.101.00
Cap. (T)- 400T
PB 400
COFMOW/IR/HPB/400/2011
Rs.190.00
Rs.209.00
16X4000 MM
CNCGS DC16X40
COFMOW/IR/CNCDCGSM/16x4000/2012
Rs.589.00
Rs.647.00
190
CNC DOUBLE COLUMN 20X4000 MM GUILLOTINE SHEARING HYDAULICALLY OPERATED, WITH MATERIAL HANDLING SYSTEM
CNCGS DC20X40
COFMOW/IR/CNCDCGSM/20x4000/2012
Rs660.00
Rs.726.00
191
HYDAULIC POWERED 16MM (100T) /COMBINED SHEARING, PUNCHING, CROPPING & NOTCHING
CSPCM
COFMOW/CSPCN/100T/2009
Rs.24
Rs.27.00
192
GUILLOTINE SHEARING 10x2400 MM MACHINEDOUBLE COLUMN
GSDC 1024
COFMOW/IR/DCGSM/2011
Rs.24.00
Rs.27.00
193
GUILLOTINE SHEARING 10x3100 MM MACHINE DOUBLE COLUMN GUILLOTINE SHEARING 13x3100 MM MACHINE DOUBLE COLUMN GUILLOTINE SHEARING 16x3100 MM MACHINEDOUBLE COLUMN
GSDC 1031
COFMOW/IR/DCGSM/2010
Rs.28.00
Rs.31.00
GSDC 1331
COFMOW/IR/DCGSM/2010
Rs.31.00
Rs.35.00
GSDC 1631
COFMOW/IR/DCGSM/2010
Rs.35.00
Rs.39.00
GUILLOTINE SHEARING 16x4000 MM MACHINE DOUBLE COLUMN
GSDC 1640
COFMOW/IR/DCGSM/2010
Rs.73.00
Rs.80.00
GSDC 631
COFMOW/IR/DCGSM/2010
Rs.22.00
Rs.24.00
GSDC 624
COFMOW/IR/DCGSM/2010
Rs.20.00
Rs.22.00
PRESS BRAKES 182 CNC PRESS BRAKES HYDRAULIC 183 CNC PRESS BRAKES HYDRAULIC 184 CNC PRESS BRAKES HYDRAULIC 185 CNC PRESS BRAKES HYDRAULIC 186 PRESS BRAKES HYDRAULIC 187 NON CNC PRESS BRAKES HYDRAULIC 188 NON CNC PRESS BRAKES HYDRAULIC SHEARING MACHINES 189 CNC DOUBLE COLUMN GUILLOTINE SHEARING HYDAULICALLY OPERATED, WITH MATERIAL HANDLING SYSTEM
194
195
196
197
GUILLOTINE SHEARING 6x3100MM MACHINE DOUBLE COLUMN 198 GUILLOTINE SHEARING 6x2400 MM MACHINE DOUBLE COLUMN DY.CME-III BAND SAW
Rs.361.00 (WITHOUT AMC CHARGES)
Rs.397.00 (WITHOUT AMC CHARGES)
199
CNC FULLY AUTOMATIC HORZ. BAND SAW FOR CUTTING OF AXLE BLOOMS WITH INTEGRATED MATERIAL HANDLING/IN LINE SYSTEM
200
PLC CONTROLLED FULLY AUTOMATIC HORZ.BAND SAW FOR CUTTING OF DRAFT GEARS BORING MACHINES
400MM DIA, 400X400MM SQ
HDMCBS
340 MM DIA & 340X340 HMCBS MM SQ.
COFMOW/IR/HDMCBSM/400X40 Rs.442.00 0MM/2010
Rs.486.00
COFMOW/HDHMCBSM/2010/Rev Rs31.00 .I
Rs34.00
201
CNC HORZ. BORING SPINDLE DIA 110MM AND MILLINGMACHINE (Tooled Up)
CNCHBM110
COFMOW/IR/CNCHBM-110/2007 Rs.213,00
Rs.234.30
202
HORZ. BORING AND SPINDLE DIA 130MM MILLING MACHINE (TOOLED UP) Non CNC
HBM130
COFMOW/IR/HBM-130/2011
Rs.260.00
Rs.290.00
203
CNC SPECIAL PURPOSE BORING MACHINE WITH MATERIAL HANDLING
Max. turning/swing diameter =1600mm (min.)
CNCSPBM
COFMOW/IR/CNC-SPBM/2007
Rs.720.00
Rs.792.00
204
RADIAL DRILLING MACHINE 60x2350mm
ARM LENGTH 2350 MM RDM60 ,DRILLING CAP 60 MM
COFMOW/IR/RD-50X /2350, Rs.22.00 60x2350 & 80 x 2500/2010 & 2010 Rev.I & Rev.II
Rs.24.00
205
RADIAL DRILLING MACHINE 80x2500mm
Arm length 2350mm drilling cap. 80 MM
RDM80
COFMOW/I/RD50/2350x60x2350 Rs.47.00 & 80x2500/2010 & 2010 Rev.I & II
Rs.52.00
206
RADIAL DRILLING MACHINE
Arm length 3600 mm drilling cap. 100 MM
RDM100
COFMOW/I/RD80/250&100/3600/ Rs.150.00 2008
Rs.165.00
207
RADIAL DRILLING MACHINE WITH FLOOR PLATE PORTABLE RADIAL DRILLING MACHINE
Arm length 3600mm Drilling cap.100mm
RDM 100
COFMOW/IR/RDM80/250 & 100/3600/2010 Rev.I
Rs.181.50
Arm length 2750mm Drilling cap.50mm
PRDM50
COFMOW/IR/TTRDM50/2250/200 Rs37.70 9
Rs.41.50
208
Rs165.00
209
UNIVERSAL PORTABLE Arm length 2750mm RADIAL DRILLING Drilling cap.50mm MACHINE
UPRDM50
COFMOW/IR/UPRDM50/2250/201 Rs60.50 1
Rs.66.55
210
TRAVELLING TYPE RADIAL DRILLING MACHINE (NON-CNC)
RDMTT65
COFMOW/IR/TTRDM/2011
Rs.185.00
Rs.200.00
RDMTT80
COFMOW/IR/HDTTRDM/2010
Rs.400.00
Rs.440.00
CNCGHM
COFMOW/IR/GHM-800/2008
Rs.785.00
Rs.865.00
211
65X2000MM (TRAVELLING TYPE) LONGITUDINAL TRAVERSE = 6000MM 80X2800MM (Travelling type)Longitudinal Traverse=6000mm
TRAVELLING TYPE RADIAL DRILLING MACHINE WITH TRUNION FIXTURE (TOOLED UP) (NONCNC) GEAR MANUFACTURING MACHINES 212 GEAR HOBBING 800mm,5 axis CNC MACHINE (MAX. DIA)
MACHINIG CENTRES (TOOLED UP)
DY.CME-III
213
CNC HORIZONTAL MACHINING CENTRES WITH PALLET (TOOLED UP) FOR 1-3 COMPONENTS
214
CNC HORIZONTAL Type Horizontal pallet MACHINING CENTRES 630X630 MM WITH PALLET (TOOLED UP) FOR 1-3 COMPONENTS CNC HORIZONTAL Table size 500x500mm MACHINING CENTRES WITH PALLET (TOOLED UP) FOR 02 COMPONENTS
215
DYCMEIII
DYCME-III
Type Horizontal pallet size 800X1000 MM
CNCMC1000
COFMOW/IR/HMC800x1000/2000
Rs.1030.00
Rs.1133.00
CNCMC630
COFMOW/IR/HMC-600/2008
Rs780.00
Rs.860.00
CNCMC 500
COFMOW/IR/HMC-500/2010
Rs.180.00
Rs.198.00
216
CNC HORIZONTAL Type Horizontal pallet CNCMC800 MACHINING CENTRES SIZE 800 X 800 MM WITH PALLET (TOOLED UP) FOR 1-3 COMPONENTS
COFMOW/IR/HMC800x800/DLW/2002
Rs522.20
Rs.574.40
217
HORIZONTAL Type Horizontal SIZE MACHINING CENTRES 1600X1400 MM 5 -AXIS (TOOLED UP) WITHOUT PALLET FOR 14 COMPONENTS
CNCMC1600
COFMOW/IR/CNC HMC/2009
Rs.928.49
Rs. 1020.85
218
Table size CNC HORIZONTAL 3000x2000mm MACHINING CENTRES 5-AXIS (TOOLED UP) FOR 04 COMPONENTS
CNCMC3000 COFMOW/IR/'CNC HMCWH 3000 X 2000/2011
Rs.588.00
Rs.647.00
219
CNC VERTICAL MACHINING CENTRES (3-AXIS)
COFMOW/IR/DLW/VMM600X1100/2005
Rs.245.00
Rs.269.00
220
VERTICAL MACHINING Type vertical Table size 1400X650mm CENTRES (3AXIS)(TOOLED UP) FOR 2-3 COMPONENT
CNCVMC
COFMOW/IR/VMC/DCW/2001
Rs.300.00
Rs.330.00
221
VERTICAL MACHINING Type vertical Table size 1000X900mm CENTRES (5AXIS)(TOOLED UP) FOR 10 COMPONENT
CNCVMC1000 COFMOW/IR/CNCVMC/2009
Rs.386.00
Rs.425.00
222
5-AXIS CNC HEAVY DUTY UNIVERSAL MACHINING CENTRES WITH MILLING EHAD,APC,ATC & ROTARY TABLE (TOOLED UP)
For 3 Phase Loco Stators
HDUMC
COFMOW/IR/HDUMC/2009
Rs.1401.40
Rs.1541.54
224
CNC BED TYPE MILLING MACHINE WITHOUT WORK TABLE &NC ROTARY TABLE &W/O ATC CNC TURN MILL CENTRE/CAMSHAFT MILLING MACHINE
Work table1000x3000mm longitudinal travel4000mm
CNCBTMM
COFMOW/IR/MCNC/BTMM/2009
Rs.675.00
Rs.742.00
For machining of cam shafts
CNCTMC
COFMOW/IR/CNC-TMC2000/2011
Rs.1120.00
Rs.1230.00
CNCFM
COFMOW/IR/CNCFM/3200X5/201 Rs.307.00 0
225
226
Type vertical Table size CNCVMM 600x1100
For folding of coach CNC FOLDING MACHINE capacity 4mm components stainless steel, 5mm corten steel working
Rs.337.00
227
1500 MM CNC HORIZONTAL BORING &MILLING MACHINE X2000mm, Y-1650mm, Z1100mm, B1200x1200mm
DY-III
228
MULTISTATION CNC FOR COMPLETE CNCHBTC16 160MM SPINDLE DIA MACHINING OF ALCO & FLOOR TYPE GM ENGINE BLOCK TRAVELLING COLUMN CNC HORIZONTAL BORING & MILLING MACHINE WITH FIXTURES AND BORING BARS (TOOLED UP) X11000mm, Y-2400mm, Z1000mm, W-900mm, Floor Plate 6000x2000mm (2 nos.)
DY-III
229
MULTISTATION CNC FOR MACHINING OF 160MM SPINDLE DIA EMD CRANK CASES & FLOOR TYPE COMPONENTS TRAVELLING COLUMN CNC HORIZONTAL BORING & MILLING MACHINE WITH FIXTURES AND BORING BARS (TOOLED UP) X10000mm, Y-3000mm, Z1000mm, W-700mm,B1000X1000MM Floor Plate - 6000x2000mm (2 nos.)
230
DMG 3AXIS THREE AXIS CNC GUN (FOR CAMSHAFTS DRILLING MACHINE UPTO 800MM LENGTH & DRILLING OPERATION OF CON ROD AND CAP) 2 Spindle M/c for TSPBM TWO SPINDLE FINE Con.Rod & BORING MACHINE (SPM) Cap.Assembly SPECIAL PURPOSE For Axle CNCEMCCTM CNC END MILLING,CENTERING & CUP TURNING M/c
231
DYCMEIII
232
FOR MACHINING OF TRACTION MOTOR MAGNET FRAME
CNCHB150
COFMOW/IR/HBMM200X1200/DMW/2004
Rs.1150.00
Rs.1265.00
COFMOW/IR/HBM/DCW/2003
Rs.4410.00
Rs.4851.00
CNCHBTC-16 COFMOW/IR/HBM/CNC/TCT/200 Rs.1393.00 8
Rs.1532.30
COFMOW/IR/CDM/600X800/2007 Rs.180..00
Rs.198.00
COFMOW/IR/TSPBM(SPM)
Rs.1600.00
Rs.1760.00
COFMOW/IR/CNCEMCCTM/2010
Rs.1020.00
Rs.1122.00
233
5 AXIS CNC UNIVERSAL X-axis (longitudinal URTMM MACHINING CENTRE traverse) 630mmY-axis FOR TOOL ROOM (vertical traverse 560 mm, Z axis (spindle head traverse) 560mm Spindle motor power-10kw
COFMOW/IR/Milling Machine/ Universal/CNC/ 2005
Rs.325.00
Rs.357.50
234
CUT TO LENGTH LINE
COFMOW/IR/CTLL/2010
Rs. 1690.00
Rs. 1859.00
COFMOW/IR/TCTDBM/2010 Rev.I
Rs.1303.00
Rs. 1433.30
COFMOW/IR/CNC/PCMIL/2007
Rs.1261.00
Rs.1387.10
235
7500mmx1600mmx6mm CTLL Thickness CNC TRAVELLING TYPE For engine block drilling CNCTTDM DRILLING & BORING & Tapping MACHINE WITH TRUNION FIXTURES (TOOLED UP)
PLANO-MILLING 236
CNC DOUBLE COLUMN 7000X3000X1000 PLANO MILLING MACHINE
CNC MILLIP
237
PORTAL MILLING For machining of EMD MACHINE X-13000MM,Y-Crank Cases, WITH 3000MM,Z-1250MM,W- MULTIPLE SPINDLE 1000MM, TABLE 5500X1500
CNC HDPMM
COFMOW/IR/CNC/HDPMMWMS/ Rs.4245.80 2009
Rs. 4670.30
238
Gantry type machining centre X-7500mm, Y4000mm, Z-1200mm, Table-5500x1500
For Bogie machining
GTCNCMC
COFMOW/CNCMC & ATC/2005
Rs.2600.00
Rs.2860.00
CNC TURNING CENTRES/ CNC CHUCKERS (TOOLED UP) WITH 2-3 COMPONENTS CNC TURNING CENTER/CNC CHUCKER (TOOLED UP) 2-3 COPONENT With Y- Axis CNC TURNING CENTRES/CNC CHUCKERS (TOOLED UP)FOR 2-3 COMPONENTS
Turning diameter250mm Turning length400mm
CNCTC 2540
COFMOW/IR/CNC/TC250x400/2005
Rs.54.00
Rs.59.40
450x1000 mm
CNCTC4510
COFMOW/IR/CNC/TC180X400,200X400,250X700 & 450X1000/2009
Rs.80.00
Rs.88.00
Turning diameter250mm, Turning lenth900mm
CNCT2590
COFMOW/IR/CNC-TC-200X500, 250X900 & 450X1000MM/2011
Rs. 154.00
Rs.170.00
CNC TWIN SPINDLE CHUCKER (WITHOUT GANTRY AND BAR FEEDER ) DY.CME-IV AIR COMPRESSOR 243 ROTARY SCREW DIESEL DRIVEN
Turning diameter200mm Turning length175mm
CNC TSCK
COFMOW/IR/CNC/TSC/200/2010 Rs.240.00 (Rev.I)
Rs.264.00
ACDD 180/7
COFMOW/IR/DAC/SC/180/7/2008 Rs.13.85
Rs.14.91
ACDD 300/8.5 COFMOW/IR/DAC/SC/300/8.5/20 Rs.15.40 08 ACDD 300/7 COFMOW/IR/DAC/SC/300/7/2008 Rs.14.30
Rs.16.94 Rs.15.70
TURNING CENTRES 239
240
241
242
244
180CFM 7KG/CM
2
2
ROTARY SCREW DIESEL DRIVEN ROTARY SCREW DIESEL DRIVEN ROTARY SCREW DIESEL DRIVEN
300CFM 8.5KG/CM
450CFM 10KG/
ACDD 450/10
COFMOW/IR/DAC/SC/450/10/200 Rs.20.00 8
Rs.22.00
247
ROTARY SCREW DIESEL DRIVEN
600CFM 7KG/CM2
ACDD 600/7
COFMOW/IR/DAC/SC/600/7/2008 Rs.22.10
Rs.24.30
248
*ROTARY SCREW ELECTRICAL DRIVEN
120CFM 10KG/
ACED 120/10
COFMOW/IR/EAC/SC/120/10/200 Rs.11.00 9
Rs.12.10
249
ROTARY SCREW ELECTRICAL DRIVEN
300CFM 7.5KG/cm2
ACED 300/7.5 COFMOW/IR/EAC/SC/300/7.5/200 Rs.13.60 9
Rs.14.52
250
ROTARY SCREW ELECTRICAL DRIVEN
300CFM 10KG/cm2
ACED 300/10
COFMOW/IR/EAC/SC/300/10/200 Rs.21.00 9
Rs.23.10
251
ROTARY SCREW ELECTRICAL DRIVEN
500CFM 7.5KG/CM2
ACED 500/7.5 COFMOW/IR/EAC/SC/500/7/5/200 Rs.17.60 9
Rs.19.36
252
ROTARY SCREW ELECTRICAL DRIVEN
500CFM 10KG/CM2
ACED 500/10
Rs.25.30
Rs.27.83
253
ROTARY SCREW ELECTRICAL DRIVEN
1000CFM 7.5KG/CM2
ACED 1000/7.5 COFMOW/IR/EAC/SC/1000/7.5/20 Rs.28.60 09
Rs.31.46
254
ROTARY SCREW ELECTRICAL DRIVEN
1000CFM 10KG/CM2
ACED 1000/10 COFMOW/IR/EAC/SC/1000/10/20 Rs.38.10 09
Rs.41.50
245 246
300CFM 7KG/CM
2
COFMOW/IR/EAC/SC/500/10/2 009
255
·
ROTARY SCREW ELECTRICAL DRIVEN OIL FREE AIR COMPRESSOR
1000CFM 7.5KG/CM2
ACEDOF/1000/ COFMOW/IR/EAC/OF/1000/7.5/20 Rs.150.00 7.5 10
Rs.165.00
Note – Oil free Air compressor electric driven 100CFM/7.5 kg/cm2 as New Items.
DY.CME-IV HAMMERS 256
FORGING HAMMERS
Type-Blow energy Open FHOD 1500 dIe- 1500Mkg
COFMOW/IR/FH- 1500/2008
Rs.1.0 Cr
Rs.1.25 Cr
257
FORGING HAMMERS
Type-Blow energy Open FHOD 2250 die- 2250Mkg
COFMOW/IR/FH- 2250/2008
Rs.125.00
Rs.137.00
258
FORGING HAMMERS
Type-Blow energy Open FHOD 450 die- 450Mkg
COFMOW/IR/FH- 450/2001
Rs.60.00
Rs.66.00
259
FORGING HAMMERS
Type-Blow energy Open FHOD 650 die- 650Mkg
COFMOW/IR/FH- 650/2008
Rs.45.00
Rs.50.00
260
FORGING HAMMERS
Type-Blow energy Open FHOD 4500 die- 4500Mkg
COFMOW/IR/FH- 4500
Rs.150.00
Rs.170.00
261
TUP HAMMER
Blow energy 7300Kg.
COFMOW/IR/TH/ 1996
Rs.238.00
Rs.261.80
262
*DOUBLE ACTING TERRY HAMMER
Terry Hammer 1245Mkg DATH - 1245
COFMOW/IR/M/TH – 1245MKG/2008
Rs.90.00
Rs.1.0 cr
DOUBLE SPINDLE HORIZONTAL KEY WAY MILLING HORIZONTAL MILLING MACHINE HORIZONTAL MILLING MACHINE WITH VERTICAL HORIZONTAL MILLING MACHINE
Length of key way – 10- DSKM 200mm Width of key way5-20mm Table size 1600X355 HMM mm(LXW) Table size 1600X350 HMM mm(LXW)
COFMOW/IR/SPM (DSKM)/200/x20x75/2011
Rs.45.00
Rs.50.00
COFMOW/IR/MILLING/M/c/NON- Rs.30.00 CNC/2011 COFMOW/IR/Horizontal/HVMM/16 Rs.35.00 00x350mm/
Rs.33.00
Table size 1350X310 mm(LXW)
HMM
COFMOW/IR/MILLING/M/c/NON- Rs.30.00 CNC/2011
Rs.33.00
267
UNIVERSAL MILLING MACHINE
Table size 1600X300 mm(LXW)
UMM
COFMOW/IR/MILLING/M/c/NON- Rs.34.00 CNC/2011
Rs.38.00
268
VERTICAL MILLING MACHINE
Table size 1350X310 mm(LXW)
VMM
COFMOW/IR/MILLING/M/c/NON- Rs.30.00 CNC/2011
Rs.33.00
FHTUP
MILLING MACHINE
263
264 265
266
Rs.38.50
INJECTION MOULDING
269
AUTOMATIC INJECTION 300GM MOULDING M/c
AIMM300
COFMOW/IR/FAIMM/300GM/2005 Rs.50.00
Rs55.00
270
AUTOMATIC INJECTION 500GM MOULDING M/c
AIMM500
COFMOW/IR/FAIMM/500GM/2005 Rs. 60.00
Rs.66.00
271
COIL SPREADING MACHINE 3 DIA TRATION MOTOR
CSM
COFMOW/IR/CSM/2001
Rs.46.00
Rs.50.00
272
DATA LOGGING SYSTEM FOR ENGINE TEST BED
DLSFETB
COFMOW/IR/MBDL/FMS/ETB/20 Rs.46.00 05
Rs.50.00
273
COMPUTERISED WATER LOAD BOX WITH COOLING TOWER, WATER BOX PLATE LIFTING MACHANISM
CWLB
COFMOW/IR/M/CLB/2005
Rs.65.00
Rs.72.00
274
COMPUTERISED WATER LOAD BOX WITH COOLING TOWER, WATER BOX PLATE LIFTING MACHANISM WITH COMPLETE CONSTRUCTION LIKE TEST CABIN ETC.
CWLBCC
COFMOW/IR/M/CLB/2007
Rs.102.30
Rs.112.50
275
HOT PHOSPHATING PLANT
HPP(PU)
COFMOW/IR/M/RW/Phos/ 2011
Rs.211.00
Rs.232.20
276
HOT PHOSPHATING PLANT PORTABLE X-RAY MACHINE
HPP(WS)
COFMOW/IR/M/RW/Phos/ 2011
Rs.162.00
Rs.180.00
PXRM
COFMOW/IR/ XAY/PORTABLE/ 2011
Rs.37.00
Rs.40.00
278
DIGITAL FUEL INJECTION PUMP TEST BENCH FOR LOCOMOTIVE
TSFIPC
COFMOW/IR/M/ DFIPTB/2011
Rs. 38.00
Rs. 42.00
279
*X-RAY MACHINE FOR BAGGAGE SCANNER
XRMFBS
COFMOW/IR/X-RAY/BS/2011
Rs. 38.00
Rs. 42.00
280
COMPUTERISED GE GOVERNOR TEST STAND COMPUTERISED WOODWARD GOVERNOR TEST STANSD WITH LAN FACILITY TRANSVERSE TESTING MACHNE
TEGEGOV
COFMOW/IR/CGE/GTS/2005
Rs.27.50
Rs.30.25
TSWW GOVN COFMOW/IR/CWWGTS/2009
Rs.30.00
Rs.33.00
TTM
COFMOW/IR/TTM/200/2006
Rs.30.00
Rs.33.00
COMPUTERISED TICKET PRINTING MACHINE COMPUTERISED TICKET & STATIONARY PRINTING MACHINE
CTPM
COFMOW/IR/CTPM/2006
Rs.90.00
Rs.100.00.
CTSPM
COFMOW/IR/CT & SPM/2006
Rs.110.00
Rs.121.00
SHEET FED OFFSET PRINTING MACHINE
SFOPM
COFMOW/IR/FOSPM/2010
Rs.37.40
Rs.42.00
WOPM
COFMOW/IR/WOSPM/2006
Rs.101.50
Rs.111.00
277
281
282
PRINTING MACHINES 283
284
285
286
WEB OFF SET PRINTING MACHINE WITH NUMBRING UNITS SPECTROMETERS 287
OES LAB SPECTROMETER FOR METAL
OESLAB SPETC
COFMOW/IR/Spectrometer/Metal/ Rs.50.00 Lab/2011
Rs.55.00
288
OES PORTABLE SPECTROMETER FOR METAL
OESPORT SPETC
COFMOW/IR/Spectrometer/Metal/ Rs.50.00 Portable/2003
Rs.55.00
289
PARTICLE COUNTER FOR MACHINE WEAR CONDITION MONITORING
PC
COFMOW/IR/PC-DRF/2010
Rs.39.00
Rs.35.00
290
ATOMIC ABSORPTION SPECTROMETER
SPEMAB
COFMOW/IR/AA/Spectrometer/Oil Rs.39.00 /2005
Rs.43.80
291
ROTRODE SPECTROMETER FOR OIL *WD XRF FLUORESENCE SPECTROMETER & SAMPLE PREPARATORY ACCESSORIES
SPECTRT
COFMOW/IR/Spectrometer/RDE/ Rs.80.00 Oil/2008
Rs.88.00
XRF
COFMOW/IR/M/ XRF/2011
Rs.300.00
Rs.330.00
*OPTICAL METALLURGICAL MICROSCOPE
OMM
COFMOW/IR/TIMM/2009
Rs.36.00
Rs.40.00
SEG(IMP)
COFMOW/IR/SEG-500/1000/ 2008
Rs.950.00
Rs.1000.00
292
293
SPRING MANUFACTURING MACHINE 294
COIL SPRING END GRINDING MACHINE (IMPORTED)
Spring Outer Dia Max 500mm/Min. 60mm
SPRING TESTING MACHINE 295
COIL SPRING LOAD 20T DEFLECTION TESTING MACHINE
CSS& LDTM20 COFMOW/IR/CS/LDTM/20/2011
Rs.30.00
Rs.33.00
296
COIL SPRING 25T SCRAGGING & LOAD DEFLECTION TESTING MACHINE
CSS& LDTM25 COFMOW/IR/CSS ALDTM/25/2011
Rs.33.00
Rs.36.00
297
*COIL SPRING 25T SCRAGGING & LOAD DEFLECTION TESTING MACHINE WITH AXIAL SHIFT FOR LHB & IRY COACHES
CSS& COFMOW/IR/LHB&IRY/CSLDTM- Rs.240.00 LDTM25(LHB) 25/2008
Rs.265.00
TESTING EQUIPMENT
298
HYDRAULIC 150T HORIZONTAL TENSILE TESTING MACHINE
HTTM150
COFMOW/IR/HTTM/150/20011
Rs.36.00
Rs.40.00
299
HYDRAULIC 200T HORIZONTAL TENSILE TESTING MACHINE
HTTM200
COFMOW/IR/HTTM/200/2008
Rs.43.00
Rs.48.00
300
SHOCK ABSORBER TESTING M/C FOR COACHES SHOCK ABSORBER TESTING M/C FOR LOCO SHOCKERS (UNIVERSAL) *SHOCK ABSORBER TESTING MACHINE FOR LHB & YAW DAMPERS UNIVERSAL TESTING MACHINE
SATHYD
COFMOW/IR/SAT/SH/1300/2010
Rs.32.00
Rs.35.00
SATMLOCO COFMOW/IR/SAT/L/SH/1300/201 Rs.80.00
Rs.88.00
301
302
303
2
SATMM
COFMOW/IR/M/CCM/SAT/2010
Rs.100.00
Rs.110.00
100T
UTM100
COFMOW/IR/ CCUTM/100T/ 2011 Rs.33.00
Rs.36.00
304
UNIVERSAL TESTING MACHINE
100T
UTM100
COFMOW/IR/ CCUTM/100T/ 2011 Rs.33.00
Rs.36.00
305
UNIVERSAL TESTING MACHINE
20T
UTM20
COFMOW/IR/ CCUTM/20T/ 2011 Rs.30.00
Rs.33.00
306
BOGIE TESTING 50T MACHINE BOGIE LOAD TESTING MACHINE
BLTM50
COFMOW/IR/BLT/50/2011
Rs.71.00
Rs.78.00
ELECTRO MAGNETICCRACK DETATORS 307
MAGNAFLUX TESTING MACHINE FOR SPRING FOR LHB COACHES
EMCDCS LHB COFMOW/IR/EMCDFCS/LHB/100 Rs.30.00 0/2011
Rs.33.00
308
ELECTROMAGNETIC CRACK DETECTOR FOR LOCO CRANK SHAFT
EMCDLCS
COFMOW/IR/EMCDLCS/2011
Rs.35.00
Rs.38.00
309
ELECTROMAGNETIC CRACK DETECTOR FOR ANCHOR LINK AND EQ. STAY
EMCDEL&ES
COFMOW/IR/EMCD/AL&ES/2012 Rs.32.00
Rs.35.00
310
ELECTROMAGNETIC CRACK DETECTOR FOR AXLE
EMCDAXLE
COFMOW/IR/M/EMCDAXLE/2011 Rs.37.00
Rs.41.00
311
MAGNAFLUX TESTING FOR DRAFT GEAR
EMCDDG
COFMOW/IR/MTM/DG/2011
Rs.38.00
GRDG
COFMOW/IR/GGM-800/Rev./2010 Rs.1000.0
Rs.1095.0
Rs.35.00
GRINDING MACHINE 312
GEAR MACHINE
313
GEAR GRINDING 400 mm 5Axis CNC GRDG MACHINE CENTERLESS GRINDER Work dia range 8- CG 100mm Max. workpiece length 2000 MM for UNIVERSAL TOOL & Working dia-300mm CNCGTOOL CUTTER GRINDER Spindle power 11kw
COFMOW/IR/GGM-400/Rev./2010 Rs.850.00
Rs.930.00
COFMOW/IR/CNCGGM/2011
Rs.720.00
Rs.800.00
COFMOW/I/CNC/T&CG/400 /2009 Rs.210.00
Rs.232.00
316
UNIVERSAL PRECISION Internal grinder depths ID CNCIG INTERNAL GRINDER 300mm MACHINE
COFMOW/IR/UPIG/2002
Rs.280.00
Rs.310.00
317
CNC INTERNAL Grinding depth 300mm GRINDER MACHINE
CNCIGM
COFMOW/IR/CNCIGM/250/2008
Rs.620.00
Rs.700.00
318
CNC INTERNAL Grinding depth 250mm GRINDER MACHINE WITH TURRET
CNCIGM
COFMOW/IR/CNCIGM/250/2009
Rs.700.00
Rs.770.00
319
CNC UNIVERSAL Grinding length 1000mm CNC UPCG GRINDING MACHINE height of center- 170mm
COFMOW/IR/CNC/UPCG/2008
Rs.330.00
Rs.365.00
320
CYLINDRICAL GRINDER
COFMOW/IR/CG/225x2000/2008 Rs.90.00
Rs.100.00
321
CNC CAM SHAFT Dia GRINDER MACHINE 1700mm
COFMOW/IR/CSGM1700X160/2007
Rs.1070.0
322
HORIZONTAL SURFACE 450x1500mm GRINDER
323
CNC LINE MACHINE
324
CNC CREEP GRINDER
314
315
HONING MACHINE
GRINDING 800 mm 5Axis CNC
200mm dia X 2000 mm CYLG length 160mmlength CNCCGS HSG
GRINDING FOR CARBON BRUSH LGM GRINDING FEED FOR CON. GRINDING
ROD&
CAP CNCCFG
Rs.990.0
COFMOW/IR/SG/250X1500/2007 Rs.137.00
Rs.150.00
COFMOW/IR/LGM/CB/2008
Rs.650.00
Rs.710.00
COFMOW/IR/DLW/LGM/CB/2008 Rs.700.00
Rs.760.00
HONING Honing
dia 250mm for HM1200 GM/ALCO cylinder liners for DMW spindle Stroke 1200mm
COFMOW/IR/VHM/250X1200/200 Rs.450.00 9
Rs.520.00
Honing dia 200mm for
HM500
COFMOW/IR/VHM/200x500/2009 Rs.290.00
Rs.340.00
COORDINATE Table size 1800x4000 MEASURING MACHINE (CMM) DIMENSION CHECKING MACHINE (PORTABLE CMM) MICROGAUGING EQUIPMENT FOR MEASUREMENT OF CAM SHAFT
COMM
COFMOW/I/CMM/ RCF/2000
Rs.90.00
Rs100.00
MBFDC
COFMOW/I/Portable CMM/2009
Rs45.00
Rs.50.00
MICGAUG
COFMOW/IR/MGE-1700/2007
Rs.180.00
Rs.198.00
330
CNC PROFILE CHECKING EQUIPMENT FOR MEASUREMENT OF CAM SHAFT
CNCM
COFMOW/IR/CNCM/2008
Rs.155.00
Rs.170.00
331
3D GANTRY TYPE CO- FOR MEASUREMENT ON 3DCOMM ORDINATE MEASURING CRANKCASES MACHINE (CMM)
COFMOW/IR/3DCMM/2010
Rs 700.00
Rs 770.00
332
LASER BORING MEASUREMENT AND ALIGNMENT SYSTEM
COFMOW/IR /LLBMAS/GOC/2005 Rs. 38.00
325
VERTICAL MACHINE
326
VERTICALHONING MACHINE
METROLOLOGICAL MACHINES
327
328
329
BMA
Note – Coil Spring Scragging & Load Deflection Testing Machine with Axial Shift for LHB & IRY Coaches and Testing Machine for Yaw Dampers as New Items.
Rs 41.80
Shock Absorber
REVISED ESTIMATED COST OF MACHINERY & PLANT FOR THE FINANCIAL YEARS 2013-14 & 2014-15
ISSUE ON 12.7.2012
Officer
CME(P)
S.No.
Machine Description
Capacity
Machine ID
Spec. No.
Cost in lacs Yr. 2013-14
Cost in lacs Yr. 2014-15
EOT CRANES
i) Estimated cost do not include the cost of DSL (Down Shop lead). The estimated cost per meter length of DSL is :M.S. Angle type= Rs. 2,500/- per meter and shrouded type = Rs. 4,500/- per meter. The Railways/Consignees while sending the indent should add the cost of DSL as per requirement. ii) EOT cranes with VVVF (Variable Voltage Variable Frequency) drive have lower power consumption and are relatively easier to maintain and therefore have lower life cycle cost. In case of consignee opting for VVVF drive, add10%to the initial capital cost of EOT crane. (Recommended for EOT crane of capacity 20 Ton. and above) iii) For additional feature of remote control add Rs. 2.0 lakh to capital cost.
CME(P)
1
EOT CRANE
2TON.
EOT2
COFMOW/IR/EOTC/2012
Rs. 20.00
Rs. 22.00
2 3 4
EOT CRANE EOT CRANE EOT CRANE
3TON. 5TON. 10TON
EOT3 EOT5 EOT10
COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012
Rs. 30.00 Rs.40.00 Rs. 55.00
Rs.33.00 Rs.44.00 Rs. 61.00
5 6 7 8 9 10
EOT CRANE EOT CRANE EOT CRANE EOT CRANE EOT CRANE EOT CRANE
15TON. 20TON. 25TON. 30TON. 35TON 40TON.
EOT15 EOT20 EOT25 EOT30 EOT35 EOT40
COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012
Rs. 65.00 Rs.70.00 Rs.80.00 Rs.85.00 Rs. 90.00 Rs.110.00
Rs. 72.00 Rs.77.00 Rs. 88.00 Rs. 94.00 Rs.99.00 Rs.121.00
50TON. 65TON
EOT50 EOT65
COFMOW/IR/EOTC/2012 COFMOW/IR/EOTC/2012
Rs.150.00 Rs.160.00
Rs.165.00 Rs.176.00
11 EOT CRANE 12 EOT CRANE GOLIATH CRANES 13 GOLIATH CRANE
5TON
GC 5
COFMOW/IR/EOTC/G/5/2009
Rs.72.00
Rs.79.00
GC15
COFMOW/IR/EOTC/G/15/2009
Rs.135.00
Rs.149.00
EOTCUHJ5
COFMOW/IR/EOTC/5T(UNDERH Rs.118.00 UNG JIB)/2003
50 TON.,SPAN,21.5 M
TCC 50
85 TON.SPAN 17.50 M
TCC 85
COFMOW/IR/EOTC/25X2/(TWIN Rs.250.00 CRAB)/2010 COFMOW/IR/EOTC/42.5X2/(TWI Rs.330.00 N CRAB)/2010
100 TON.SPAN 25. M appxox 60TON.SPAN 17.50 M
TCC100
14 GOLIATH CRANE 15TON EOT CRANES WITH UNDERHUNG JIB 15 EOT CRANES WITH 5 TON. UNDERHUNG JIB
CME(P)
Rs.130.00
TWIN CRAB EOT CRANES 16 17 18 19
TWIN CRAB EOT CRANE TWIN CRAB EOT CRANE TWIN CRAB EOT CRANE TWIN CRAB EOT CRANE
TCC 60
COFMOW/IR/EOTC/42.5X2/(TWI Rs.375.00 N CRAB)/2010 COFMOW/IR/EOTC/42.5X2/(TWI Rs.260.00 N CRAB)/2010
Rs.275.00 Rs.363.00 Rs.413.00 Rs.286.00
CME(P)
TRAVERSERS i) Estimated cost do not include the cost of DSL (Down Shop Lead ). The estimated cost per meter length of DSL is : M.S. Angle type= Rs.2,500/- per meter and shrouded type= Rs.4,500/- per meter. The Railways/Consignees while sending the indents should add the cost of DSL as per requirement ii)The estimated cost of DSL with masts is about Rs. 20000/- per meter bay length.The railway while sending the indent shall add the cost per meter requirement . iii) Traversers with VVVF (Variable Voltage Variable Frequency) drives have lower power consumption and are relatively easier to maintain and therefore have lower life cycle cost. In case of consignee opting for VVVF drive, add10%to the initial capital cost of traversers.
CME(P)
PIT TYPE TRAVERSERS 20 PIT TYPE TRAVERSERS 75TON. (2 track) without TRAVP2T75 portal
COFMOW/IR/MH/TRAV/2012
Rs.210.00
Rs.232.00
21
PIT TYPE TRAVERSERS 80TON. (Multi track)
TRAVPMT80
COFMOW/IR/MH/TRAV/2012
Rs.210.00
Rs.232.00
22
PIT TYPE TRAVERSERS 100TON. (Multi track)
TRAVPMT100 COFMOW/IR/MH/TRAV/2012
Rs.220.00
Rs.242.00
TRAVSMT35
COFMOW/IR/MH/TRAV/2012
Rs.100.00
Rs.110.00
SURFACE TRAVERSER 23 SURFACE TRAVERSER 35TON. (Multi track)
24
SURFACE TRAVERSER 50TON. (2track)
TRAVS2T50
COFMOW/IR/MH/TRAV/2012
Rs.170.00
Rs.187.00
25
SURFACE TRAVERSER 70TON. (2track)
TRAVS2T70
COFMOW/IR/MH/TRAV/2012
Rs.195.00
Rs.215.00
CME(P)
CME(P)
26
SURFACE TRAVERSER 80TON. (2track)
TRAVS2T80
COFMOW/IR/MH/TRAV/2012
Rs.220.00
Rs.242.00
27
SURFACE TRAVERSER 80TON. (Multi track)
TRAVSMT80
COFMOW/IR/MH/TRAV/2012
Rs.190.00
Rs.210.00
DIESEL HYD. ROAD MOBILE CRANES
28
ARTICULATING TYPE
8TON.
RMCART8
COFMOW/IR/DH-RMC/ART8T/2011
Rs.12.00
Rs.13.00
29
ARTICULATING TYPE
10 TON.
RMCART10
COFMOW/IR/DH-RMC/ART10T/2011
Rs.13.00
Rs.14.00
30
ARTICULATING TYPE
12 TON.
RMCART12
COFMOW/IR/DH-RMC/ART12T/2011
Rs.15.00
Rs.17.00
31
ARTICULATING TYPE
15TON.
RMCART15
COFMOW/IR/DH-RMC/ART15T/2011
Rs.25.00
Rs.28.00
32
FULL SLEW TYPE
10 TON.
RMCSLEW10
Rs.95.00
Rs.105.00
33
FULL SLEW TYPE
12TON.
RMCSLEW12
COFMOW/IR/DH-RMC/SLEW 10T/2011 COFMOW/IR/DH-RMC/SLEW –12T/2011
Rs.100.00
Rs.110.00
34
FULL SLEW TYPE
15TON.
RMCSLEW15
COFMOW/IR/DH-RMC/SLEW –15T/2011
Rs.110.00
Rs.121.00
35
FULL SLEW TYPE
16TON.
RMCSLEW16
Rs.120.00
Rs.132.00
36
FULL SLEW TYPE
18TON.
RMCSLEW18
Rs.130.00
Rs.143.00
37
FULL SLEW TYPE
20TON.
RMCSLEW20
COFMOW/IR/DH-RMC/SLEW –16T/2011 COFMOW/IR/DH-RMC/SLEW –18T/2011 COFMOW/IR/DH-RMC/SLEW –20T/2011
Rs.150.00
Rs.165.00
38
FULL SLEW TYPE
40TON.
RMCSLEW40
COFMOW/IR/DH-RMC/SLEW –40T/2011
Rs.240.00
Rs.264.00
SYNCHRONISED LIFTING JACKS 39
SYNCHRONISED 15 TON. LIFTING JACKS ELECTRICAL OPERATED SCREWJACKS (SET OF 5 JACKS)
SJE 15
COFMOW/IR/SJE/15/2012
Rs.28.00
Rs.30.00
40
SYNCHRONISED 25TON. LIFTING JACKS ELECTRICAL OPERATED SCREWJACKS (SET OF 5 JACKS)
SJE 25
COFMOW/IR/SJE/25/2012
Rs.30.00
Rs.33.00
41
35 TON. SYNCHRONISED LIFTING JACKS OPERATED ELECTRICALSCREW JACKS (SET OF 5 JACKS) SYNCHRONISED 45 TON. LIFTING JACKS ELECTRICAL OPERATED SCREWJACKS (SET OF 5 JACKS)
SJE 35
COFMOW/IR/SJE/35/2012
Rs.35.00
Rs. 39.00
SJE 45
COFMOW/IR/SJE/45/2011
Rs.75.00
Rs.83.00
42
LOADERS 43
TRACK LOADER (BACKHOE TYPE)
1.85 CUM
TL
COFMOW/IR/TL/1.85/’1996
Rs.183.00
Rs.201.00
44
CRAWLER LOADER
1.6 CUM
CWL
COFMOW/IR/TL/1.6/’1996
Rs.225.00
Rs.248.50
45
FRONT END LOADER
0.7 CUM
FELO.7
COFMOW/IR/FEL/0.7/’2000
Rs.20.00
Rs.22.00
46
FRONT END LOADER
1.0 CUM
FEL1.0
COFMOW/IR/FEL/1.0/’2001
Rs.35.00
Rs.39.00
47
FRONT END LOADER
1.7 CUM
FEL1.7
COFMOW/IR/FEL/1.7/’2001
Rs.45.00
Rs.50.00
48
LOADER CUM EXCAVATOR SKID STEER LOADER
1.0/0.18 CUM
FELCE/1.0/0.1 COFMOW/IR/FELCUM Rs.42.00 8 EXCAVATOR/1.0/0.18/1600/2009 SSL COFMOW/IR/SSL/700/0.35/2002 Rs.22.00
Rs.46.00 Rs.24.50
AIRBAG55
COFMOW/IR/AIR BAG/2009
Rs.8.00
Rs.9.00
AIRBAG130
COFMOW/IR/AIR BAG/2009
Rs.25.00
Rs.28.00
LWET
COFMOW/IR/Light weight elect. Tools/2005
Rs.8.00
Rs.9.00
COFMOW/IR/Synthetic Packing/2007
Rs.1.10
Rs.1.20
49
CME(P)
0.35 CUM
DISASTER MANAGEMENT 50 51
INFLATABLE AIR BAG 55TON (RECTANGULAR TYPE) INFLATABLE AIR BAG 130TON (ROUND TYPE) 1SET OF 2NOS.
52
LIGHT WEIGHT ELECTRIC TOOLS SET
53
SYNTHETIC PACKING 1000X 300X 250mm ,1000X 300X 200mm , 1000X 300X100mm
54
UNDERWATER CUTING EQUIPMENT
UW CUTTING COFMOW/IR/Underwater cutting/2005
Rs.7.00
RS.8.00
55
WATER MIST FIRE FIGHTING EQUIPMENT (BACKPACK TYPE)
WMFF
COFMOW/IR/Water Mist Fire Fighting/2008
Rs.7.00
Rs.8.00
56
INFLATABLE TENT
ITENT
COFMOW/IR/Inflatable tent/2005
Rs.10.00
Rs.11.00
HRD
COFMOW/IR/HRD/2010
Rs .22.00
Rs.24.00
HRE
COFMOW/IR/RRE/2009
Rs. 63.00
Rs. 70.00
RRV
COFMOW/IR/RRV(With crane cum HRD & Fire Fighting)/2005
600T
RRVS
75T
ONE SET (Consisting of SPACK 1 No. of each size)
57
HYDRAULIC RESCUE DEVICE (IMPORTED) 58 HYDRAULIC RERAILLING EQUPMENT RAIL CUM ROAD VEHICLE 59
RAIL CUM ROAD VEHICLE WITH CRANE,HRE,HRD, FIRE FIGHTING EQUIPMENT
60
RAIL CUM ROAD VEHICLE (SHUNTING VEHICLE)
Rs.1150.00
Rs.1250.00
COFMOW/IR/600T/2007
Rs.300.00
Rs.330.00
BD
COFMOW/IR/BD/2007
Rs.350.00
Rs.385.00
SSTS
COMOW/IR/SSTS/2009
Rs.130.00
Rs.143.00
BULLDOZER 61
DIESEL HYD. BULLDOZER SHELL SKIN TENSONING 62 DY.CEE
SHELL SKIN TENSONING
ELECTRICAL EQUIPMENTS 63
DYNAMIC BALANCING MACHINE
3000 Kg.
DBM 3000
COFMOW/IR/DYN BAL3000/2011
Rs.18.00
Rs.19.80
64
DIESEL GENERATATING SETS
160KVA
DGS160
COFMOW/IR/DG Set/AMF-2010
Rs.14.59
Rs.16.50
DY.CEE
65
DIESEL GENERATATING SETS
250KVA
DGS250
COFMOW/IR/DG Set/AMF-2010
Rs.20.50
Rs.22.40
66
DIESEL GENERATATING SETS
320KVA
DGS320
COFMOW/IR/DG Set/AMF-2010
Rs.24.30
Rs.26.70
67
DIESEL GENERATATING SETS
500KVA
DGS500
COFMOW/IR/DG Set/AMF-2010
Rs.38.50
Rs.42.40
68
TRANSFORMER OIL FILTRATION PLANT
3000LPH
HVTOP 3000
COFMOW/IR/ HVTOP/2011
Rs.16.50
Rs.18.00
69
TRANSFORMER OIL FILTRATION PLANT
5000LPH
HVTOP 5000
COFMOW/IR/ HVTOP/2011
Rs.19.50
Rs.21.50
70
STATIC WEIGH BRIDGE 100MT (RAIL)
RWB100
COFMOW/IR/WB/ 2011
Rs.22.25
Rs.24.50
71
STATIC WEIGH BRIDGE 100MT (ROAD)
RDWB100
COFMOW/IR/WB/ 2011
Rs.19.00
Rs.21.00
72
STATIC WEIGH BRIDGE 100MT (RAIL CUM ROAD)
RRWB100
COFMOW/IR/WB/ 2011
Rs.21.00
Rs.23.00
73
SEMIAUTOMATIC SUBMERGESD ARC WELDING PLANT
SWP
COFMOW/IR/SEMI/SAW/1000Am Rs.19.50 p/2008 9Rev.-1)
Rs.21.50
74
Wheel IMPACT LOAD INDIGENOUS DEFLECTION(INDIGENO US)
WILD
COFMOW/IR/WILD/2006
Rs.100.00
Rs.110.00
75
WHEEL IMPACT LOAD DEFLECTION (IMPORTED)
WILDIM
COFMOW/IR/WILD/2006
Rs.360.00
Rs.395.00
76
VACCUM DRYING PLANT
VDP
COFMOW/IR/VPIP/2000
Rs.46.30
Rs.51.00
77
Inverter Baed MIG MAG Synergic Pulse Welding Plant, Air cooled torch
400 Amp
PMIGW400
COFMOW/IR/Pulse/WP/2010
Rs.3.92
Rs.4.32
78
Inverter Baed MIG MAG 450 Amp Synergic Pulse Welding Plant, Water cooled torch
PMIGW400
COFMOW/IR/Pulse/Water cooled/RF/WP/2010
Rs..4.85
Rs.5.32
79
Inverter based MIG MAG 450 Amp Synergic Welding Plant, Air cooled torch
PMIGW450
COFMOW/IR/Synergic/WP2011
Rs.2.80
Rs.3.10
80
Inverter Based MIG450 Amp MAG/MMA Welding plant
SAWPINV
COFMOW/IR/Synergic/WP(MIG MAG-CO2)2007
Rs.8.60
Rs.9.45
81
Semi Automatic CO2 MIG 400Amp MAG Welding Plant with BOOM
SAWPINV
COFMOW/IR/Synergic/WP(MIG MAG-CO2)/2007
Rs.8.60
Rs.9.45
82
Semi Automatic CO2 MIG 400 Amp MAG Welding Plant with MCAW Process
SAWP/PUL
COFMOW/IR/Synergic/WP (MIG MAG-CO2)2007
Rs.9.10
Rs.9.95
1000AMP
IMPOERTED
83
Tig Welding Plant
84
350 Amp
TWP
COFMOW/IR/AC-DC/TIGWP/2011 Rs.8.25
Rs.9.10
Commutator Tig Welding machine
CTWM
COFMOW/IR/ARM TIG/WP/2011
Rs.46.15
Rs.51.00
85
Test Console for Testing DC Traction Motor for NO Load Tst
TMTCNL
COFMOW/E/TMTC/NO LOAD2011
Rs.23.50
Rs.26.00
86
Test Console for Testing DC Traction Motor for ON Load Test
TMTCOL
COFMOW/E/TMTC/ LOAD-2011
Rs.69.50
Rs.76.20
87
Spot Welding Plant
WMS
COFMOW/IR/SPOT/WELD/99
Rs.53.50
Rs.59.00
TRACTION MOTOR SHOP MACHINES Dy.CME-I
AXLE SHOP MACHINE 88
CYLINDRICAL AXLE GRINDING MACHINE (INDIGENOUS CNC)
Length-3000mm.max. Dia-300mm max.
CNCAGM
COFMOW/IR/MT/AG-3/2005-Rev- Rs.400.00 II
Rs.440.00
89
CNC AXLE TURNING LATHE IMPORTED
Surface finish= 0.8 micron Ra(min.)
CNCATLIMP
COFMOW/IR/CNC/ATLIII/3000X600/2006Rev.-II/2010
Rs.716.00
Rs.788.00
90
CNC AXLE TURNING LATHE IDIGENOUS
Surface finish1.6 micron CNCATLIND to3.2 micron
COFMOW/IR/CNC/ATL/3000x300/ Rs.200.00 2006 (Rev-II)/2010
Rs.220.00
91
DOUBLE END MILL AND Length of comp. 300mm DEMC CENTRE M/C to 1250mm /diameter of comp. 25mm to 125mm
COFMOW/IR/FCDT/2005
Rs.100.00
Rs.110.00
92
HORIZONTAL DRILLING Length of axle 2700mm DTMH & TAPPING MACHINE max. & 2200mm min. SINGLE ENDED diameter of axle 300mm & 100mm
COFMOW/IR/CDT/AXLE/2005
Rs.121.00
Rs.133.00
93
AJTB (BG)
Track gauge 1676mm, tread dia 1225-750mm, axle length 26502200mm
COFMOW/IR/MT/JTB-3-R5/2004
Rs.194.00
Rs.213.00
94
AJTB (BG/MG/NG)
AJTBBGMGN Track gauge 1676762mm, tread dia 1225- G 495mm, axle length 26501100mm
COFMOW/IR/MT/JTB/BG/MG&N G/2008
Rs.199.00
Rs.219.00
95
AJTB (BG/MG)
Track gauge 1676-1000, AJTBBGMG tread dia 1225-600mm, axle length 26501500mm
COFMOW/IR/MT/JTB7/98/Rev.I/2005
Rs.196.00
Rs.216.00
Screen diameter 500mm OPP magnification
COFMOW/IR/OPP/2002
Rs.21.00
Rs.23.00
AJTBBG
METROLOGICAL INSTRUMENT 96
OPTICAL PROFILE PROJECTOR (VERTICAL TYPE)
FLOOR CLEANING MACHINE
97
INDUSTRIAL VACUUM 1800mm sweep SWEEPER WITH CABIN
IVS
COFMOW/IR/IVS/2006/Rev.II
Rs.57.00
Rs.62.00
LAPCH
COFMOW/IR/Cyl. Head lap/2004/Rev-II/2010
Rs.30.00
Rs.33.00
COFMOW/IR/Bar Peeling Machine/2003
Rs.631.00
Rs.693.00
TMML
COFMOW/IR/Laser Tool Marking/2003
Rs.91.00
Rs.100.00
BO
COFMOW/IR/Baking Oven/Rly. Coach/2004
Rs.206.00
Rs.226.60
LAPPING MACHINE 98
CYLINDER HEAD LAPPING MACHINE
BAR PEELING MACHINE 99
BAR PEELING M/C
Bar dia 16-60mm length PLMB
TOOL MARKING MACHINE 100
LASER TOOL MARKING MIN. 10 W DIODE MACHINE PUMP SOLID TYPE MULTIMODE ND YAG LASER 110X110MM RANGE PAINTING EQUIPMENT 101
BAKING OVEN FOR RLY. ENGER COACH
Size (max.) length-30m Width-10m Height-11m (on turnkey basis)
102
SURFACE PAINTING BOOTH FOR RLY. ENGER COACH
Internal size 31m(L)x 7m PB (W)x 6m (H) max
COFMOW/IR/Surface Painting Booth/enger Coach/2002
Rs.434.00
Rs.478.00
103
COMPLETE PAINTING SYSTEM FOR RLY. ENGER COACH
(i) SPRAY BOOTH-1 no. PBDO ext. size 30M(L)x10m(W)x 11(H) (ii) DRYING OVEN-01 no.
COFMOW/IR/PB&BO/Rly. Coach/2007
Rs.951.50
Rs.1046.65
104
PRIMARY PAINTING PLANT FOR RAIL COACH SPRING (DIP PAINTING TYPE)
PPP
COFMOW/IR/Primary Paint Plant/Coil Spring/2003
Rs.271.70
Rs.293.87
APCM
COFMOW/IR/CNC/APCM/Portal/3 Rs.136.00 000x6000/2/KRev.I/2005 (Turn key)
Rs. 150.000
PROFILE CUTTING MACHINES
DY CME-I
105
CNC AIR PLASMA CUTTING MACHINE
1x32x6000x3000
106
CNC AIR PLASMA 3 torch x32x9000x3500. APCM 3T CUTTING MACHINE (3 torch, imported machine)
COFMOW/IR/CNC/APCM/Portal/3 Rs.450.00 000x6000/2/KRev.II/2008 (Turn key)
Rs. 500.00
107
CNC GAS PROFILE CUTTING MACHINE
4 Torch 75mm thickness CNCGPCM
COFMOW/IR/PGCM/Portal/3000/9 Rs.70.00 9/Rev.III/2007
Rs.77.00
108
CNC LASER CUTTING MACHINE
109
CNC LASER CUTTING MACHINE
4KW , Thickness20mm(MS),16mm (Corten steel), 10mm(SS) Table size- 3000(W)X (12000+1200) (L) 4KW, Thickness20mm(MS),15 MM (Corten steel), 8mm(SS)Sheet size4000mmX2000mm
110
CNC LASER CUTTING MACHINE
CNCLCM 3000 COFMOW/IR/Laser CuttingII/2005
Rs.1168.00
Rs.1284.00
CNCLCM4000 COFMOW/IR/Laser CuttingII/2001/Rev-I/2008
Rs.900.00
Rs.990.00
Rs.1250.00
Rs.1375.00
5KW ThicknessCNCLCM6500 COFMOW/IR/ Laser Cutting22mm(MS),15mm II/2001/Rev-I/2008 (Corten steel), 8mm(SS) Sheet size- 6000mm X3000mm
111
112
113
CNC LASER CUTTING & Max. sheet size 2mx4m WELDING MACHINE Thickness 0.8-3mm MACHINE BED SIZE 6X2.5 MM GAS PROFILE 4 Torch Thickness= CUTTING MACHINE 100mm
CNC LW&CM
COFMOW/IR/Laser cutting & welding/2004/Rev-I/2008
GPCM
COFMOW/IR/PGCM/Cantiportal/9 Rs.21.00 2-R4/2004 (Turnkey)
Rs.23.00
CNLASMA PROFILE CUTTING MACHINE (UNDER WATER)
Pipe dia 10-90mm, pipe thickness 4mm, length 6mtr.
PCMUW
COFMOW/IR/CNC//APCM/UNDE Rs.500.00 R WATER/2007
Rs.550.00
2 no. of robots, welding fixtures and welding positioner
RBWM
COFMOW/IR/WLD/ Robot /2004 / Rs.689.70 Rev.I /2007
Rs.758.67
RBWM – EB
COFMOW/IR/WLD/Robot /DMW /R-1/2007
Rs.825.00
Rs.2500.00
Rs.2750.00
DY.CME-I ROBOTIC WELDING 114
Bogie bolster and bogie frame welding machine
115
Robotic Welding Machine For loco engine block, 1 for engine block no. of Robot, 1 work positiioner
Rs.754.30
SURFACE PREPARATION SYSTEM 116
BEAD BLASTING MACHINE
117
AIRLESS CENTRIFUGAL GRIT BLASTING PLANT 2 TURBINE WHEEL, INLET & EXIT POWERISED ROLLER
118
AIRLESS CENTRIFUGAL SHOT BLASTING PLANT 4 TURBINE WHEEL, INLET & EXIT POWERISED ROLLER
119
Dia of table 1200mm BBCL load cap. 500kg. No. of satellite on main indexing turn table-4
COFMOW/IR/Bead Blast/ Cylinder Rs.55.00 Liner/2002
Rs.61.00
CSBP(2TUR)
COFMOW/IR/GBP/2003
Rs.78.00
Rs.86.00
CSBP(4TUR)
COFMOW/IR/SBP/2002/Rev-I/ 2005
Rs.90.00
Rs.99.00
AIRLESS CENTRIFUGAL Spring diameter 70CSSB SHOT BLASTING PLANT 400mm Free height 150FOR COIL SPRING 700mm Weight of Spring 3.3-80kg.
COFMOW/IR/CS/SB/97(RevII)2003/2007
Rs.55.00
Rs.61.00
120
GRIT BLASTING PLANT Job size GBPBF FOR BOGIE FRAME 4244x2947x800mm Max. (AIRLESS ROTOR wt.-1500kg. TYPE)
COFMOW/IR/Bogie Frame/SB/2003/Rev-I/2004
Rs.125.00
Rs.140.00
121
GRIT BLASTING PLANT Cabinet size FOR DIESEL ENGINE 1mx1mx1.5m(H) CYLINDER LINERS
COFMOW/IR/SBP/2/94 Rev.I/2003
Rs.33.00
Rs.36.00
122
RAIL SHOT BLASTING RSBM MACHINE SHOT BLASTING PLANT Table diameter 1200mm, RTSBM 1200 (SWING TABLE TYPE) table speed 4 to 5RPM
COMOW/IR/RSBM/2002
Rs.79.00
Rs.87.00
COFMOW/IR/RTSBM/2003/RevIII/2010
Rs.24.00
Rs.27.00
124
SHOT BLASTING PLANT Table diameter 1800mm RTSBM 1800 (SWING TABLE TYPE) table speed 3-4RPM
COFMOW/IR/SBM /Swing table- Rs.33.00 1828mm (72inch) 2003/Rev-I/2005
Rs.37.00
125
SHOT BLASTING PLANT Table diameter 2400mm RTSBM 2400 (SWING TABLE TYPE) table speed 3 to 4RPM
COFMOW/IR/SBM/Swing Table96 inch/r-2/2006
Rs.44.00
123
GBPDSL
Rs.40.00
126
COMBINED AIRLESS CENTRIFUGAL SHOT BLASTING & SHOT PEENING PLANT FOR COIL SPRING & LAMINATED SPRING COIL
127
COACH SHOT BLASTING PLANT (AIRLESS ROTOR TYPE WITH 16 ROTORS)
THREADING MACHINES 128 SCREWING/BOLT OR PIPE THREADING MACHINE
129
CNC Pipe Bending machine
Coil spring diameter-70 SB&PM to 475mm/ Max. length of laminated spring-1862 mm/ free height-150 to 900mm /Max. width of laminated spring-120mm
SBP(COACH)
Bolt Cap-1/4”-4” PipeCap- TMPB 1/4”-4”
Pipe dia 10-90mm, pipe thickness 4mm, length 6mtr.
COFMOW/IR/CS/SP/97/RevI/2006
Rs.82.00
Rs.90.00
COFMOW/IR/Shot Blast/Rly.Coach/2002/rev-II/2009
Rs.660.00
Rs.716.00
COFMOW/IR/ Screwing/2006
Rs.43.00
Rs.47.00
Rs.198.00
Rs.217.00
CNBM(PIPE COFMOW/IR/Pipe Bending ) (CNC)/90mm/2008
DY.CME-I TRACTION MOTOR SHOP MACHINES 130
ARMATURE BINDING MACHINE
BMA
COFMOW/IR/MT/ABM/1/90/Rev-I Rs. 61.00
Rs.67.00
131
FULLY AUTOMATIC COMMUTATOR MICA UNDER CUTTING & DEBURRING M/C
CMUM
COFMOW/IR/MT/AMUD/R299/(Rev-2)/2006
Rs.55.00
Rs.61.00
132
COMMUTATOR TURNING & POLISHING
CT&P
COFMOW/IR/MT/CTL-2/97/RevII/2009
Rs.71.00
Rs.78.00
133
UNIVERSAL MULTIPURPOSE ARMATURE MACHINE
UAM
COFMOW/IR/MT/UAM-1-90/Rev- Rs.95.00 V/ 2007 (turnkey)
Rs.102.00
TURNING CENTRE 134
HEAVY DUTY TURNING Turning diameterTLHD LATHE 1500mm Turning length3000mm
COFMOW/IR/CL-3000X1500/2005 Rs.85.00
Rs.94.00
135
CNC UNDER FLOOR WHEEL LATHE (BG)
WITHOUT SHED
WLU(BG)
COFMOW/IR/M/CNC-UFWL(BG)/2011
Rs.475.00
Rs.500.00
136
CNC UNDER FLOOR WHEEL LATHE (BG)
WITH SHED
WLU(BG)
COFMOW/IR/M/CNC-UFWL(BG)/WITH WORKS/2011
Rs.600.00
Rs. 650.00
137
CNC UNDER FLOOR WHEEL LATHE (BG CUM MG)
WLU(BG&MG) COFMOW/I/M-UFWL/(BG&MG)/ 2004
Rs500.00
Rs.525.00
138
RECONDITIONING OF UNDER FLOOR WHEEL LATHE (BG)
RCWLUF (BG) COFMOW/IR/M-UFWL(BG)/REC /2006
Rs.246.00
Rs.270.00
AXLE BOX CLEANING PLANT BOGIE (BG) WASHING PLANT
AB
COFMOW/IR/M/ AB-/2011
Rs.202.00
Rs.222.00
BC
COFMOW/IR/M-BWP/2001
Rs.702.00
Rs772..00
COACH WASHING PLANT
CW
COFMOW/IR/M-CWP/2010
Rs.605.00
Rs.665.00
DY.CME-II CLEANING AND WASHING PLANTS 139 140 141
142
BEARING CLEANING PLANT 143 *ENGINE BLOCK WASHER VERTICAL TURNING LATHES 144 CNC VERTICAL TURNING LATHE FOR WHEEL MACHINING 145
Table dia 1400mm For wheels
RB
COFMOW/IR/M/B/2012
Rs.385.00
Rs.423.00
EBW
COFMOW/IR/EBW/ 2011
Rs.660.00
Rs.726.00
CNCVTL1400
COFMOW/CNC/ VTL-WM-1400/ 2012
Rs.300.00
Rs.330.00
CNC VERTICAL TURNING LATHE CNC VERTICAL TURNING AND BORING MACHINE & WHEEL HANDLING SYSTEM WITH CONVEYORS AND MANIPULATOR
Table dia 800mm for CNCVTL800 components Table dia 1400 mm (For CNC VTBM RWF)
COFMOW/IR/CNC/VTL-800/2010 Rs.355.00
Rs.391.00
COFMOW/IR/CNC/VTBM1600/2007
Rs.643.50
Rs.707.85
NON CNC VERTICAL TURRET LATHE
Table dia 1500mm
VTL1500
COFMOW/VTL/1500/2012
Rs.252.00
Rs.277.00
NON CNC VERTICAL Table dia 1400mm TURRET LATHE FOR WHEEL MACHINING DY.CME-II BOILERS AND FURNACES 2000kg./hr. 149 OIL FIRED BOILER 4000kg./hr. 150 OIL FIRED BOILER 151 OIL FIRED BOGIE Cap 2.5 Ton HEARTH FURNACE FOR STRESS RELIVING
VTL1400
COFMOW/IR/VTL/WM-1400/2012 Rs.229.00
Rs.250.00
OFB2000 OFB4000 BHF2.5T
COFMOW/IR/M-OFB/2000/2002 COFMOW/IR/M-OFB/4000/2011 COFMOW/IR/OFF/ BOGIE/SRF/2011
Rs.77.00 Rs.85.00 Rs116.00
Rs.85.00 Rs.94.00 Rs.127.00
146
147
148
152
OIL FIRED BOGIE Cap.5 Ton HEARTH FURNACE FOR STRESS RELIVING
BHFF5T
COFMOW/IR/OFF/ BOGIE/SRF/2011
Rs.121.00
Rs.133.00
153
OIL FIRED BOGIE Cap.10TON HEARTH FURNACE FOR STRESS RELIVING
BHF10T
COFMOW/IR/OFF/ BOGIE/SRF/2011
RS.160.00
RS.175.00
154
OIL FIRED BOGIE Cap12 Ton HEARTH FURNACE FOR STRESS RELIVING
BHF12T
COFMOW/IR/OFF/ BOGIE/SRF/2011
Rs.193.00
Rs.212.00
SIMIM
COFMOW/IR/M-SIM-2007(Rev-1) Rs.1723.00
Rs.1895.00
PL(Heavy) Length - 14000mm Width - 1600mm, (2NOS PLANING, 1NO MILLING & 1 NO GRINDING HEAD) Length- 4500mm Width- PL 1600mm,(2 nos. planing, 1 no. milling & 1 no. grinding heads)
COFMOW/IR/PL/14000X1600/200 Rs.403.00 4
Rs.443.00
COFMOW/IR/PL/4500X1600/2006 Rs.399.00
Rs.439.00
COFMOW/IR/IP/PSM/2010
Rs.968.00
Rs.1065.00
COFMOW/IR/M-PSM/2010
Rs.424.00
Rs.466.00
SIMULATOR 155 SIMULATORS IN MOTION TYPE PLANNER MACHINE 156
DOUBLE COLUMN PLANING MACHINE
157
DOUBLE COLUMN PLANING MACHINE
DY.CME-II STRAGHTENING MACHINES 158
PLATE STRAIGHTENING MACHINE
Plate thickness (1025mm & width 2500mm P441n/mm2 (S.S)
159
PLATE STRAIGHTENING MACHINE
Plate thickness 8-16mm PSM(8-16) & width 1250mm (M.S)
PSM(10-25)
160
PLATE Plate thickness 05-20mm PSM(5-20) STRAIGHTENING & width 2500mm , MS-IS MACHINE 2062 161 RAIL STRAIGHTENING RSM MACHINE PLATE BENDING MACHINES 162 CNC PROFILE BENDING CNB
COFMOW/IR/PSM/2010
Rs.470.00
Rs.517.00
COFMOW/IR/RSM/1999
Rs.146.00
Rs.161.00
COFMOW/IR/PBM/2011
Rs.1500.00
Rs.1650.00
COFMOW/IR/HPB/PBM/2010
Rs.280.00
Rs.307.00
163
HYDRAULIC PLATE BENDING MACHINE
600mm x 1250mm Top roll pressure- 600 T
HYDPBM
164
HYDRAULIC PLATE BENDING MACHINE
i) Corten steel(UTS440MPa)-1.5-10 mm ii)SS(UTS-860 MPa- up to 4 mm Width 2750mm
HYDPBM(1.5- COFMOW/IR/HPB/PBM/2010 10)
Rs.61.00
Rs.67.00
HP200(4COL) COFMOW/IR/M/ HP/200/1987
Rs.70.00
Rs.77.00
Rs.68.00
Rs.75.00
HYDRAULIC PRESSES 165 HYD. PRESS 4 COLUMN CAP 200T (W/O TOOLING) 166
HYD. PRESS 4 COLUMN CAP. 300T (W/O TOOLING)
HP300(4COL) COFMOW/IR/C-50/4C100,300/2010
167
HYD. PRESS 4 COLUMN CAP 500T (W/O TOOLING)
HP500(4COL) COFMOW/IR/M/HP/4C-500T/C- Rs.114.00
168
HYD. PRESS 4 COLUMN CAP 500T (W/O TOOLING) 2 CYL. OF 250 T
HP500(4COL) COFMOW/IR/HP- 4C/2 cyl.500T/2011
Rs.212.00
Rs.232.00
169
HYD. PRESS 4 COLUMN CAP 100T (W/O TOOLING)
HP100(4-COL) COFMOW/IR/M/ HP/2009
Rs.35.00
Rs.38.00
170
HYD. PRESS ‘C’ FRAME CAP 100T (W/O TOOLING)
HP100 ( C)
COFMOW/IR/M/ HP/2009
Rs.30.00
Rs.33.00
171
HYD. PRESS ‘C’ FRAME CAP 200T (W/O TOOLING)
HP200 ( C)
COFMOW/IR/M/ HP/2009
Rs.38.00
Rs.42.00
172
HYD. HORIZONTAL PRESS( C-FRAME)
HPSEMIAUTO COFMOW/IR/C-50,100,200/2011 200
Rs.35.00
Rs.39.00
173
HYD. PRESS ‘C’ FRAME CAP 50T (W/O TOOLING)
HP50 (C )
COFMOW/IR/C-50,100,200/2011
Rs.13.00
Rs.16.00
174
HYD. PRESS 4 COLUMN CAP 1000T FOR BOGIE STRAIGHTENING
HP1000 (4COL)
COFMOW/IR/1000T/ST.PRESS/2 Rs.540.00 011
Rs.595.00
CAP 63T
TP63
COFMOW/IR/TP/63/2000
Rs.44.00
Rs.48.00
CAP 30T
TP
COFMOW/IR/PPM/30T/1999
Rs.28.00
Rs.30.00
CAP 200T
TP200
COFMOW/IR/MTP/HF/200T/2007 Rs.70.00
Rs.77.00
CAP 200T
EP
COFMOW/IR/EP-200T/2011
Rs.83.00
WLS
COFMOW/CNC/SWL/BG/2 Rs.561.00 (WITHOUT 012 (Rev. 1) (with AMC)
Rs.617.00 (WITHOUT AMC CHARGES)
COFMOW/CNC/SWL/BG/2 Rs.611.00 (WITHOUT 012 (Rev. 1) (with AMC)
Rs.661.00 (WITHOUT AMC CHARGES)
CAP 200T
Rs.125.00
200T /2011
DY.CME-II TRIMMING PRESSES 175 176 177 178
TRIMMING PRESS (MECHANICAL) TRIMMING PRESS (MECHANICAL) TRIMMING PRESS (MECHANICAL) ECCENTRIC PRESS (W/O TOOLING)
Rs.76.00
WHEEL LATHES
DY.CME-II 179
CNC SURFACE WHEEL WITH PROBE TYPE LATHE (BG) MEASUREMENT
AMC CHARGES)
180
CNC SURFACE WHEEL WITH LASER BASED LATHE (BG) MEASUREMENT & BRAKE DISC MACHINING
DY.CME-II WHEEL PRESS
WLS
AMC CHARGES)
181
DY.CME II
DY.CME II
DY.CME II
HYD. WHEEL PRESS (BG CUM MG)
CAP 500T
WP500
COFMOW/IR/M-HWP/2011
Cap. (T)- 200T
CNB 200
COFMOW/IR/CNC HPB/200/2012 Rs.133.00
Rs.146.00
Cap. (T)- 400T
CNB 400
COFMOW/IR/CNC HPB/400/2012 Rs.202.00
Rs.227.00
Cap. (T)- 650T
CNB 650
COFMOW/IR/HPB/640/2007
Rs.300.00
Rs.330.00
Cap. (T)- 800T
CNB 800
COFMOW/CNCHPB 800T/2012
Rs.400.00
Rs.440.00
Cap. (T)- 80T
PB 80
COFMOW/IR/HPB/80 & 200/2010 Rs.42.00
Rs.46.00
Cap. (T)- 200T
PB 200
COFMOW/IR/HPB/80 & 200/2010 Rs.91.00
Rs.101.00
Cap. (T)- 400T
PB 400
COFMOW/IR/HPB/400/2011
Rs.190.00
Rs.209.00
16X4000 MM
CNCGS DC16X40
COFMOW/IR/CNCDCGSM/16x4000/2012
Rs.589.00
Rs.647.00
190
CNC DOUBLE COLUMN 20X4000 MM GUILLOTINE SHEARING HYDAULICALLY OPERATED, WITH MATERIAL HANDLING SYSTEM
CNCGS DC20X40
COFMOW/IR/CNCDCGSM/20x4000/2012
Rs660.00
Rs.726.00
191
HYDAULIC POWERED 16MM (100T) /COMBINED SHEARING, PUNCHING, CROPPING & NOTCHING
CSPCM
COFMOW/CSPCN/100T/2009
Rs.24
Rs.27.00
192
GUILLOTINE SHEARING 10x2400 MM MACHINEDOUBLE COLUMN
GSDC 1024
COFMOW/IR/DCGSM/2011
Rs.24.00
Rs.27.00
193
GUILLOTINE SHEARING 10x3100 MM MACHINE DOUBLE COLUMN GUILLOTINE SHEARING 13x3100 MM MACHINE DOUBLE COLUMN GUILLOTINE SHEARING 16x3100 MM MACHINEDOUBLE COLUMN
GSDC 1031
COFMOW/IR/DCGSM/2010
Rs.28.00
Rs.31.00
GSDC 1331
COFMOW/IR/DCGSM/2010
Rs.31.00
Rs.35.00
GSDC 1631
COFMOW/IR/DCGSM/2010
Rs.35.00
Rs.39.00
GUILLOTINE SHEARING 16x4000 MM MACHINE DOUBLE COLUMN
GSDC 1640
COFMOW/IR/DCGSM/2010
Rs.73.00
Rs.80.00
GSDC 631
COFMOW/IR/DCGSM/2010
Rs.22.00
Rs.24.00
GSDC 624
COFMOW/IR/DCGSM/2010
Rs.20.00
Rs.22.00
PRESS BRAKES 182 CNC PRESS BRAKES HYDRAULIC 183 CNC PRESS BRAKES HYDRAULIC 184 CNC PRESS BRAKES HYDRAULIC 185 CNC PRESS BRAKES HYDRAULIC 186 PRESS BRAKES HYDRAULIC 187 NON CNC PRESS BRAKES HYDRAULIC 188 NON CNC PRESS BRAKES HYDRAULIC SHEARING MACHINES 189 CNC DOUBLE COLUMN GUILLOTINE SHEARING HYDAULICALLY OPERATED, WITH MATERIAL HANDLING SYSTEM
194
195
196
197
GUILLOTINE SHEARING 6x3100MM MACHINE DOUBLE COLUMN 198 GUILLOTINE SHEARING 6x2400 MM MACHINE DOUBLE COLUMN DY.CME-III BAND SAW
Rs.361.00 (WITHOUT AMC CHARGES)
Rs.397.00 (WITHOUT AMC CHARGES)
199
CNC FULLY AUTOMATIC HORZ. BAND SAW FOR CUTTING OF AXLE BLOOMS WITH INTEGRATED MATERIAL HANDLING/IN LINE SYSTEM
200
PLC CONTROLLED FULLY AUTOMATIC HORZ.BAND SAW FOR CUTTING OF DRAFT GEARS BORING MACHINES
400MM DIA, 400X400MM SQ
HDMCBS
340 MM DIA & 340X340 HMCBS MM SQ.
COFMOW/IR/HDMCBSM/400X40 Rs.442.00 0MM/2010
Rs.486.00
COFMOW/HDHMCBSM/2010/Rev Rs31.00 .I
Rs34.00
201
CNC HORZ. BORING SPINDLE DIA 110MM AND MILLINGMACHINE (Tooled Up)
CNCHBM110
COFMOW/IR/CNCHBM-110/2007 Rs.213,00
Rs.234.30
202
HORZ. BORING AND SPINDLE DIA 130MM MILLING MACHINE (TOOLED UP) Non CNC
HBM130
COFMOW/IR/HBM-130/2011
Rs.260.00
Rs.290.00
203
CNC SPECIAL PURPOSE BORING MACHINE WITH MATERIAL HANDLING
Max. turning/swing diameter =1600mm (min.)
CNCSPBM
COFMOW/IR/CNC-SPBM/2007
Rs.720.00
Rs.792.00
204
RADIAL DRILLING MACHINE 60x2350mm
ARM LENGTH 2350 MM RDM60 ,DRILLING CAP 60 MM
COFMOW/IR/RD-50X /2350, Rs.22.00 60x2350 & 80 x 2500/2010 & 2010 Rev.I & Rev.II
Rs.24.00
205
RADIAL DRILLING MACHINE 80x2500mm
Arm length 2350mm drilling cap. 80 MM
RDM80
COFMOW/I/RD50/2350x60x2350 Rs.47.00 & 80x2500/2010 & 2010 Rev.I & II
Rs.52.00
206
RADIAL DRILLING MACHINE
Arm length 3600 mm drilling cap. 100 MM
RDM100
COFMOW/I/RD80/250&100/3600/ Rs.150.00 2008
Rs.165.00
207
RADIAL DRILLING MACHINE WITH FLOOR PLATE PORTABLE RADIAL DRILLING MACHINE
Arm length 3600mm Drilling cap.100mm
RDM 100
COFMOW/IR/RDM80/250 & 100/3600/2010 Rev.I
Rs.181.50
Arm length 2750mm Drilling cap.50mm
PRDM50
COFMOW/IR/TTRDM50/2250/200 Rs37.70 9
Rs.41.50
208
Rs165.00
209
UNIVERSAL PORTABLE Arm length 2750mm RADIAL DRILLING Drilling cap.50mm MACHINE
UPRDM50
COFMOW/IR/UPRDM50/2250/201 Rs60.50 1
Rs.66.55
210
TRAVELLING TYPE RADIAL DRILLING MACHINE (NON-CNC)
RDMTT65
COFMOW/IR/TTRDM/2011
Rs.185.00
Rs.200.00
RDMTT80
COFMOW/IR/HDTTRDM/2010
Rs.400.00
Rs.440.00
CNCGHM
COFMOW/IR/GHM-800/2008
Rs.785.00
Rs.865.00
211
65X2000MM (TRAVELLING TYPE) LONGITUDINAL TRAVERSE = 6000MM 80X2800MM (Travelling type)Longitudinal Traverse=6000mm
TRAVELLING TYPE RADIAL DRILLING MACHINE WITH TRUNION FIXTURE (TOOLED UP) (NONCNC) GEAR MANUFACTURING MACHINES 212 GEAR HOBBING 800mm,5 axis CNC MACHINE (MAX. DIA)
MACHINIG CENTRES (TOOLED UP)
DY.CME-III
213
CNC HORIZONTAL MACHINING CENTRES WITH PALLET (TOOLED UP) FOR 1-3 COMPONENTS
214
CNC HORIZONTAL Type Horizontal pallet MACHINING CENTRES 630X630 MM WITH PALLET (TOOLED UP) FOR 1-3 COMPONENTS CNC HORIZONTAL Table size 500x500mm MACHINING CENTRES WITH PALLET (TOOLED UP) FOR 02 COMPONENTS
215
DYCMEIII
DYCME-III
Type Horizontal pallet size 800X1000 MM
CNCMC1000
COFMOW/IR/HMC800x1000/2000
Rs.1030.00
Rs.1133.00
CNCMC630
COFMOW/IR/HMC-600/2008
Rs780.00
Rs.860.00
CNCMC 500
COFMOW/IR/HMC-500/2010
Rs.180.00
Rs.198.00
216
CNC HORIZONTAL Type Horizontal pallet CNCMC800 MACHINING CENTRES SIZE 800 X 800 MM WITH PALLET (TOOLED UP) FOR 1-3 COMPONENTS
COFMOW/IR/HMC800x800/DLW/2002
Rs522.20
Rs.574.40
217
HORIZONTAL Type Horizontal SIZE MACHINING CENTRES 1600X1400 MM 5 -AXIS (TOOLED UP) WITHOUT PALLET FOR 14 COMPONENTS
CNCMC1600
COFMOW/IR/CNC HMC/2009
Rs.928.49
Rs. 1020.85
218
Table size CNC HORIZONTAL 3000x2000mm MACHINING CENTRES 5-AXIS (TOOLED UP) FOR 04 COMPONENTS
CNCMC3000 COFMOW/IR/'CNC HMCWH 3000 X 2000/2011
Rs.588.00
Rs.647.00
219
CNC VERTICAL MACHINING CENTRES (3-AXIS)
COFMOW/IR/DLW/VMM600X1100/2005
Rs.245.00
Rs.269.00
220
VERTICAL MACHINING Type vertical Table size 1400X650mm CENTRES (3AXIS)(TOOLED UP) FOR 2-3 COMPONENT
CNCVMC
COFMOW/IR/VMC/DCW/2001
Rs.300.00
Rs.330.00
221
VERTICAL MACHINING Type vertical Table size 1000X900mm CENTRES (5AXIS)(TOOLED UP) FOR 10 COMPONENT
CNCVMC1000 COFMOW/IR/CNCVMC/2009
Rs.386.00
Rs.425.00
222
5-AXIS CNC HEAVY DUTY UNIVERSAL MACHINING CENTRES WITH MILLING EHAD,APC,ATC & ROTARY TABLE (TOOLED UP)
For 3 Phase Loco Stators
HDUMC
COFMOW/IR/HDUMC/2009
Rs.1401.40
Rs.1541.54
224
CNC BED TYPE MILLING MACHINE WITHOUT WORK TABLE &NC ROTARY TABLE &W/O ATC CNC TURN MILL CENTRE/CAMSHAFT MILLING MACHINE
Work table1000x3000mm longitudinal travel4000mm
CNCBTMM
COFMOW/IR/MCNC/BTMM/2009
Rs.675.00
Rs.742.00
For machining of cam shafts
CNCTMC
COFMOW/IR/CNC-TMC2000/2011
Rs.1120.00
Rs.1230.00
CNCFM
COFMOW/IR/CNCFM/3200X5/201 Rs.307.00 0
225
226
Type vertical Table size CNCVMM 600x1100
For folding of coach CNC FOLDING MACHINE capacity 4mm components stainless steel, 5mm corten steel working
Rs.337.00
227
1500 MM CNC HORIZONTAL BORING &MILLING MACHINE X2000mm, Y-1650mm, Z1100mm, B1200x1200mm
DY-III
228
MULTISTATION CNC FOR COMPLETE CNCHBTC16 160MM SPINDLE DIA MACHINING OF ALCO & FLOOR TYPE GM ENGINE BLOCK TRAVELLING COLUMN CNC HORIZONTAL BORING & MILLING MACHINE WITH FIXTURES AND BORING BARS (TOOLED UP) X11000mm, Y-2400mm, Z1000mm, W-900mm, Floor Plate 6000x2000mm (2 nos.)
DY-III
229
MULTISTATION CNC FOR MACHINING OF 160MM SPINDLE DIA EMD CRANK CASES & FLOOR TYPE COMPONENTS TRAVELLING COLUMN CNC HORIZONTAL BORING & MILLING MACHINE WITH FIXTURES AND BORING BARS (TOOLED UP) X10000mm, Y-3000mm, Z1000mm, W-700mm,B1000X1000MM Floor Plate - 6000x2000mm (2 nos.)
230
DMG 3AXIS THREE AXIS CNC GUN (FOR CAMSHAFTS DRILLING MACHINE UPTO 800MM LENGTH & DRILLING OPERATION OF CON ROD AND CAP) 2 Spindle M/c for TSPBM TWO SPINDLE FINE Con.Rod & BORING MACHINE (SPM) Cap.Assembly SPECIAL PURPOSE For Axle CNCEMCCTM CNC END MILLING,CENTERING & CUP TURNING M/c
231
DYCMEIII
232
FOR MACHINING OF TRACTION MOTOR MAGNET FRAME
CNCHB150
COFMOW/IR/HBMM200X1200/DMW/2004
Rs.1150.00
Rs.1265.00
COFMOW/IR/HBM/DCW/2003
Rs.4410.00
Rs.4851.00
CNCHBTC-16 COFMOW/IR/HBM/CNC/TCT/200 Rs.1393.00 8
Rs.1532.30
COFMOW/IR/CDM/600X800/2007 Rs.180..00
Rs.198.00
COFMOW/IR/TSPBM(SPM)
Rs.1600.00
Rs.1760.00
COFMOW/IR/CNCEMCCTM/2010
Rs.1020.00
Rs.1122.00
233
5 AXIS CNC UNIVERSAL X-axis (longitudinal URTMM MACHINING CENTRE traverse) 630mmY-axis FOR TOOL ROOM (vertical traverse 560 mm, Z axis (spindle head traverse) 560mm Spindle motor power-10kw
COFMOW/IR/Milling Machine/ Universal/CNC/ 2005
Rs.325.00
Rs.357.50
234
CUT TO LENGTH LINE
COFMOW/IR/CTLL/2010
Rs. 1690.00
Rs. 1859.00
COFMOW/IR/TCTDBM/2010 Rev.I
Rs.1303.00
Rs. 1433.30
COFMOW/IR/CNC/PCMIL/2007
Rs.1261.00
Rs.1387.10
235
7500mmx1600mmx6mm CTLL Thickness CNC TRAVELLING TYPE For engine block drilling CNCTTDM DRILLING & BORING & Tapping MACHINE WITH TRUNION FIXTURES (TOOLED UP)
PLANO-MILLING 236
CNC DOUBLE COLUMN 7000X3000X1000 PLANO MILLING MACHINE
CNC MILLIP
237
PORTAL MILLING For machining of EMD MACHINE X-13000MM,Y-Crank Cases, WITH 3000MM,Z-1250MM,W- MULTIPLE SPINDLE 1000MM, TABLE 5500X1500
CNC HDPMM
COFMOW/IR/CNC/HDPMMWMS/ Rs.4245.80 2009
Rs. 4670.30
238
Gantry type machining centre X-7500mm, Y4000mm, Z-1200mm, Table-5500x1500
For Bogie machining
GTCNCMC
COFMOW/CNCMC & ATC/2005
Rs.2600.00
Rs.2860.00
CNC TURNING CENTRES/ CNC CHUCKERS (TOOLED UP) WITH 2-3 COMPONENTS CNC TURNING CENTER/CNC CHUCKER (TOOLED UP) 2-3 COPONENT With Y- Axis CNC TURNING CENTRES/CNC CHUCKERS (TOOLED UP)FOR 2-3 COMPONENTS
Turning diameter250mm Turning length400mm
CNCTC 2540
COFMOW/IR/CNC/TC250x400/2005
Rs.54.00
Rs.59.40
450x1000 mm
CNCTC4510
COFMOW/IR/CNC/TC180X400,200X400,250X700 & 450X1000/2009
Rs.80.00
Rs.88.00
Turning diameter250mm, Turning lenth900mm
CNCT2590
COFMOW/IR/CNC-TC-200X500, 250X900 & 450X1000MM/2011
Rs. 154.00
Rs.170.00
CNC TWIN SPINDLE CHUCKER (WITHOUT GANTRY AND BAR FEEDER ) DY.CME-IV AIR COMPRESSOR 243 ROTARY SCREW DIESEL DRIVEN
Turning diameter200mm Turning length175mm
CNC TSCK
COFMOW/IR/CNC/TSC/200/2010 Rs.240.00 (Rev.I)
Rs.264.00
ACDD 180/7
COFMOW/IR/DAC/SC/180/7/2008 Rs.13.85
Rs.14.91
ACDD 300/8.5 COFMOW/IR/DAC/SC/300/8.5/20 Rs.15.40 08 ACDD 300/7 COFMOW/IR/DAC/SC/300/7/2008 Rs.14.30
Rs.16.94 Rs.15.70
TURNING CENTRES 239
240
241
242
244
180CFM 7KG/CM
2
2
ROTARY SCREW DIESEL DRIVEN ROTARY SCREW DIESEL DRIVEN ROTARY SCREW DIESEL DRIVEN
300CFM 8.5KG/CM
450CFM 10KG/
ACDD 450/10
COFMOW/IR/DAC/SC/450/10/200 Rs.20.00 8
Rs.22.00
247
ROTARY SCREW DIESEL DRIVEN
600CFM 7KG/CM2
ACDD 600/7
COFMOW/IR/DAC/SC/600/7/2008 Rs.22.10
Rs.24.30
248
*ROTARY SCREW ELECTRICAL DRIVEN
120CFM 10KG/
ACED 120/10
COFMOW/IR/EAC/SC/120/10/200 Rs.11.00 9
Rs.12.10
249
ROTARY SCREW ELECTRICAL DRIVEN
300CFM 7.5KG/cm2
ACED 300/7.5 COFMOW/IR/EAC/SC/300/7.5/200 Rs.13.60 9
Rs.14.52
250
ROTARY SCREW ELECTRICAL DRIVEN
300CFM 10KG/cm2
ACED 300/10
COFMOW/IR/EAC/SC/300/10/200 Rs.21.00 9
Rs.23.10
251
ROTARY SCREW ELECTRICAL DRIVEN
500CFM 7.5KG/CM2
ACED 500/7.5 COFMOW/IR/EAC/SC/500/7/5/200 Rs.17.60 9
Rs.19.36
252
ROTARY SCREW ELECTRICAL DRIVEN
500CFM 10KG/CM2
ACED 500/10
Rs.25.30
Rs.27.83
253
ROTARY SCREW ELECTRICAL DRIVEN
1000CFM 7.5KG/CM2
ACED 1000/7.5 COFMOW/IR/EAC/SC/1000/7.5/20 Rs.28.60 09
Rs.31.46
254
ROTARY SCREW ELECTRICAL DRIVEN
1000CFM 10KG/CM2
ACED 1000/10 COFMOW/IR/EAC/SC/1000/10/20 Rs.38.10 09
Rs.41.50
245 246
300CFM 7KG/CM
2
COFMOW/IR/EAC/SC/500/10/2 009
255
·
ROTARY SCREW ELECTRICAL DRIVEN OIL FREE AIR COMPRESSOR
1000CFM 7.5KG/CM2
ACEDOF/1000/ COFMOW/IR/EAC/OF/1000/7.5/20 Rs.150.00 7.5 10
Rs.165.00
Note – Oil free Air compressor electric driven 100CFM/7.5 kg/cm2 as New Items.
DY.CME-IV HAMMERS 256
FORGING HAMMERS
Type-Blow energy Open FHOD 1500 dIe- 1500Mkg
COFMOW/IR/FH- 1500/2008
Rs.1.0 Cr
Rs.1.25 Cr
257
FORGING HAMMERS
Type-Blow energy Open FHOD 2250 die- 2250Mkg
COFMOW/IR/FH- 2250/2008
Rs.125.00
Rs.137.00
258
FORGING HAMMERS
Type-Blow energy Open FHOD 450 die- 450Mkg
COFMOW/IR/FH- 450/2001
Rs.60.00
Rs.66.00
259
FORGING HAMMERS
Type-Blow energy Open FHOD 650 die- 650Mkg
COFMOW/IR/FH- 650/2008
Rs.45.00
Rs.50.00
260
FORGING HAMMERS
Type-Blow energy Open FHOD 4500 die- 4500Mkg
COFMOW/IR/FH- 4500
Rs.150.00
Rs.170.00
261
TUP HAMMER
Blow energy 7300Kg.
COFMOW/IR/TH/ 1996
Rs.238.00
Rs.261.80
262
*DOUBLE ACTING TERRY HAMMER
Terry Hammer 1245Mkg DATH - 1245
COFMOW/IR/M/TH – 1245MKG/2008
Rs.90.00
Rs.1.0 cr
DOUBLE SPINDLE HORIZONTAL KEY WAY MILLING HORIZONTAL MILLING MACHINE HORIZONTAL MILLING MACHINE WITH VERTICAL HORIZONTAL MILLING MACHINE
Length of key way – 10- DSKM 200mm Width of key way5-20mm Table size 1600X355 HMM mm(LXW) Table size 1600X350 HMM mm(LXW)
COFMOW/IR/SPM (DSKM)/200/x20x75/2011
Rs.45.00
Rs.50.00
COFMOW/IR/MILLING/M/c/NON- Rs.30.00 CNC/2011 COFMOW/IR/Horizontal/HVMM/16 Rs.35.00 00x350mm/
Rs.33.00
Table size 1350X310 mm(LXW)
HMM
COFMOW/IR/MILLING/M/c/NON- Rs.30.00 CNC/2011
Rs.33.00
267
UNIVERSAL MILLING MACHINE
Table size 1600X300 mm(LXW)
UMM
COFMOW/IR/MILLING/M/c/NON- Rs.34.00 CNC/2011
Rs.38.00
268
VERTICAL MILLING MACHINE
Table size 1350X310 mm(LXW)
VMM
COFMOW/IR/MILLING/M/c/NON- Rs.30.00 CNC/2011
Rs.33.00
FHTUP
MILLING MACHINE
263
264 265
266
Rs.38.50
INJECTION MOULDING
269
AUTOMATIC INJECTION 300GM MOULDING M/c
AIMM300
COFMOW/IR/FAIMM/300GM/2005 Rs.50.00
Rs55.00
270
AUTOMATIC INJECTION 500GM MOULDING M/c
AIMM500
COFMOW/IR/FAIMM/500GM/2005 Rs. 60.00
Rs.66.00
271
COIL SPREADING MACHINE 3 DIA TRATION MOTOR
CSM
COFMOW/IR/CSM/2001
Rs.46.00
Rs.50.00
272
DATA LOGGING SYSTEM FOR ENGINE TEST BED
DLSFETB
COFMOW/IR/MBDL/FMS/ETB/20 Rs.46.00 05
Rs.50.00
273
COMPUTERISED WATER LOAD BOX WITH COOLING TOWER, WATER BOX PLATE LIFTING MACHANISM
CWLB
COFMOW/IR/M/CLB/2005
Rs.65.00
Rs.72.00
274
COMPUTERISED WATER LOAD BOX WITH COOLING TOWER, WATER BOX PLATE LIFTING MACHANISM WITH COMPLETE CONSTRUCTION LIKE TEST CABIN ETC.
CWLBCC
COFMOW/IR/M/CLB/2007
Rs.102.30
Rs.112.50
275
HOT PHOSPHATING PLANT
HPP(PU)
COFMOW/IR/M/RW/Phos/ 2011
Rs.211.00
Rs.232.20
276
HOT PHOSPHATING PLANT PORTABLE X-RAY MACHINE
HPP(WS)
COFMOW/IR/M/RW/Phos/ 2011
Rs.162.00
Rs.180.00
PXRM
COFMOW/IR/ XAY/PORTABLE/ 2011
Rs.37.00
Rs.40.00
278
DIGITAL FUEL INJECTION PUMP TEST BENCH FOR LOCOMOTIVE
TSFIPC
COFMOW/IR/M/ DFIPTB/2011
Rs. 38.00
Rs. 42.00
279
*X-RAY MACHINE FOR BAGGAGE SCANNER
XRMFBS
COFMOW/IR/X-RAY/BS/2011
Rs. 38.00
Rs. 42.00
280
COMPUTERISED GE GOVERNOR TEST STAND COMPUTERISED WOODWARD GOVERNOR TEST STANSD WITH LAN FACILITY TRANSVERSE TESTING MACHNE
TEGEGOV
COFMOW/IR/CGE/GTS/2005
Rs.27.50
Rs.30.25
TSWW GOVN COFMOW/IR/CWWGTS/2009
Rs.30.00
Rs.33.00
TTM
COFMOW/IR/TTM/200/2006
Rs.30.00
Rs.33.00
COMPUTERISED TICKET PRINTING MACHINE COMPUTERISED TICKET & STATIONARY PRINTING MACHINE
CTPM
COFMOW/IR/CTPM/2006
Rs.90.00
Rs.100.00.
CTSPM
COFMOW/IR/CT & SPM/2006
Rs.110.00
Rs.121.00
SHEET FED OFFSET PRINTING MACHINE
SFOPM
COFMOW/IR/FOSPM/2010
Rs.37.40
Rs.42.00
WOPM
COFMOW/IR/WOSPM/2006
Rs.101.50
Rs.111.00
277
281
282
PRINTING MACHINES 283
284
285
286
WEB OFF SET PRINTING MACHINE WITH NUMBRING UNITS SPECTROMETERS 287
OES LAB SPECTROMETER FOR METAL
OESLAB SPETC
COFMOW/IR/Spectrometer/Metal/ Rs.50.00 Lab/2011
Rs.55.00
288
OES PORTABLE SPECTROMETER FOR METAL
OESPORT SPETC
COFMOW/IR/Spectrometer/Metal/ Rs.50.00 Portable/2003
Rs.55.00
289
PARTICLE COUNTER FOR MACHINE WEAR CONDITION MONITORING
PC
COFMOW/IR/PC-DRF/2010
Rs.39.00
Rs.35.00
290
ATOMIC ABSORPTION SPECTROMETER
SPEMAB
COFMOW/IR/AA/Spectrometer/Oil Rs.39.00 /2005
Rs.43.80
291
ROTRODE SPECTROMETER FOR OIL *WD XRF FLUORESENCE SPECTROMETER & SAMPLE PREPARATORY ACCESSORIES
SPECTRT
COFMOW/IR/Spectrometer/RDE/ Rs.80.00 Oil/2008
Rs.88.00
XRF
COFMOW/IR/M/ XRF/2011
Rs.300.00
Rs.330.00
*OPTICAL METALLURGICAL MICROSCOPE
OMM
COFMOW/IR/TIMM/2009
Rs.36.00
Rs.40.00
SEG(IMP)
COFMOW/IR/SEG-500/1000/ 2008
Rs.950.00
Rs.1000.00
292
293
SPRING MANUFACTURING MACHINE 294
COIL SPRING END GRINDING MACHINE (IMPORTED)
Spring Outer Dia Max 500mm/Min. 60mm
SPRING TESTING MACHINE 295
COIL SPRING LOAD 20T DEFLECTION TESTING MACHINE
CSS& LDTM20 COFMOW/IR/CS/LDTM/20/2011
Rs.30.00
Rs.33.00
296
COIL SPRING 25T SCRAGGING & LOAD DEFLECTION TESTING MACHINE
CSS& LDTM25 COFMOW/IR/CSS ALDTM/25/2011
Rs.33.00
Rs.36.00
297
*COIL SPRING 25T SCRAGGING & LOAD DEFLECTION TESTING MACHINE WITH AXIAL SHIFT FOR LHB & IRY COACHES
CSS& COFMOW/IR/LHB&IRY/CSLDTM- Rs.240.00 LDTM25(LHB) 25/2008
Rs.265.00
TESTING EQUIPMENT
298
HYDRAULIC 150T HORIZONTAL TENSILE TESTING MACHINE
HTTM150
COFMOW/IR/HTTM/150/20011
Rs.36.00
Rs.40.00
299
HYDRAULIC 200T HORIZONTAL TENSILE TESTING MACHINE
HTTM200
COFMOW/IR/HTTM/200/2008
Rs.43.00
Rs.48.00
300
SHOCK ABSORBER TESTING M/C FOR COACHES SHOCK ABSORBER TESTING M/C FOR LOCO SHOCKERS (UNIVERSAL) *SHOCK ABSORBER TESTING MACHINE FOR LHB & YAW DAMPERS UNIVERSAL TESTING MACHINE
SATHYD
COFMOW/IR/SAT/SH/1300/2010
Rs.32.00
Rs.35.00
SATMLOCO COFMOW/IR/SAT/L/SH/1300/201 Rs.80.00
Rs.88.00
301
302
303
2
SATMM
COFMOW/IR/M/CCM/SAT/2010
Rs.100.00
Rs.110.00
100T
UTM100
COFMOW/IR/ CCUTM/100T/ 2011 Rs.33.00
Rs.36.00
304
UNIVERSAL TESTING MACHINE
100T
UTM100
COFMOW/IR/ CCUTM/100T/ 2011 Rs.33.00
Rs.36.00
305
UNIVERSAL TESTING MACHINE
20T
UTM20
COFMOW/IR/ CCUTM/20T/ 2011 Rs.30.00
Rs.33.00
306
BOGIE TESTING 50T MACHINE BOGIE LOAD TESTING MACHINE
BLTM50
COFMOW/IR/BLT/50/2011
Rs.71.00
Rs.78.00
ELECTRO MAGNETICCRACK DETATORS 307
MAGNAFLUX TESTING MACHINE FOR SPRING FOR LHB COACHES
EMCDCS LHB COFMOW/IR/EMCDFCS/LHB/100 Rs.30.00 0/2011
Rs.33.00
308
ELECTROMAGNETIC CRACK DETECTOR FOR LOCO CRANK SHAFT
EMCDLCS
COFMOW/IR/EMCDLCS/2011
Rs.35.00
Rs.38.00
309
ELECTROMAGNETIC CRACK DETECTOR FOR ANCHOR LINK AND EQ. STAY
EMCDEL&ES
COFMOW/IR/EMCD/AL&ES/2012 Rs.32.00
Rs.35.00
310
ELECTROMAGNETIC CRACK DETECTOR FOR AXLE
EMCDAXLE
COFMOW/IR/M/EMCDAXLE/2011 Rs.37.00
Rs.41.00
311
MAGNAFLUX TESTING FOR DRAFT GEAR
EMCDDG
COFMOW/IR/MTM/DG/2011
Rs.38.00
GRDG
COFMOW/IR/GGM-800/Rev./2010 Rs.1000.0
Rs.1095.0
Rs.35.00
GRINDING MACHINE 312
GEAR MACHINE
313
GEAR GRINDING 400 mm 5Axis CNC GRDG MACHINE CENTERLESS GRINDER Work dia range 8- CG 100mm Max. workpiece length 2000 MM for UNIVERSAL TOOL & Working dia-300mm CNCGTOOL CUTTER GRINDER Spindle power 11kw
COFMOW/IR/GGM-400/Rev./2010 Rs.850.00
Rs.930.00
COFMOW/IR/CNCGGM/2011
Rs.720.00
Rs.800.00
COFMOW/I/CNC/T&CG/400 /2009 Rs.210.00
Rs.232.00
316
UNIVERSAL PRECISION Internal grinder depths ID CNCIG INTERNAL GRINDER 300mm MACHINE
COFMOW/IR/UPIG/2002
Rs.280.00
Rs.310.00
317
CNC INTERNAL Grinding depth 300mm GRINDER MACHINE
CNCIGM
COFMOW/IR/CNCIGM/250/2008
Rs.620.00
Rs.700.00
318
CNC INTERNAL Grinding depth 250mm GRINDER MACHINE WITH TURRET
CNCIGM
COFMOW/IR/CNCIGM/250/2009
Rs.700.00
Rs.770.00
319
CNC UNIVERSAL Grinding length 1000mm CNC UPCG GRINDING MACHINE height of center- 170mm
COFMOW/IR/CNC/UPCG/2008
Rs.330.00
Rs.365.00
320
CYLINDRICAL GRINDER
COFMOW/IR/CG/225x2000/2008 Rs.90.00
Rs.100.00
321
CNC CAM SHAFT Dia GRINDER MACHINE 1700mm
COFMOW/IR/CSGM1700X160/2007
Rs.1070.0
322
HORIZONTAL SURFACE 450x1500mm GRINDER
323
CNC LINE MACHINE
324
CNC CREEP GRINDER
314
315
HONING MACHINE
GRINDING 800 mm 5Axis CNC
200mm dia X 2000 mm CYLG length 160mmlength CNCCGS HSG
GRINDING FOR CARBON BRUSH LGM GRINDING FEED FOR CON. GRINDING
ROD&
CAP CNCCFG
Rs.990.0
COFMOW/IR/SG/250X1500/2007 Rs.137.00
Rs.150.00
COFMOW/IR/LGM/CB/2008
Rs.650.00
Rs.710.00
COFMOW/IR/DLW/LGM/CB/2008 Rs.700.00
Rs.760.00
HONING Honing
dia 250mm for HM1200 GM/ALCO cylinder liners for DMW spindle Stroke 1200mm
COFMOW/IR/VHM/250X1200/200 Rs.450.00 9
Rs.520.00
Honing dia 200mm for
HM500
COFMOW/IR/VHM/200x500/2009 Rs.290.00
Rs.340.00
COORDINATE Table size 1800x4000 MEASURING MACHINE (CMM) DIMENSION CHECKING MACHINE (PORTABLE CMM) MICROGAUGING EQUIPMENT FOR MEASUREMENT OF CAM SHAFT
COMM
COFMOW/I/CMM/ RCF/2000
Rs.90.00
Rs100.00
MBFDC
COFMOW/I/Portable CMM/2009
Rs45.00
Rs.50.00
MICGAUG
COFMOW/IR/MGE-1700/2007
Rs.180.00
Rs.198.00
330
CNC PROFILE CHECKING EQUIPMENT FOR MEASUREMENT OF CAM SHAFT
CNCM
COFMOW/IR/CNCM/2008
Rs.155.00
Rs.170.00
331
3D GANTRY TYPE CO- FOR MEASUREMENT ON 3DCOMM ORDINATE MEASURING CRANKCASES MACHINE (CMM)
COFMOW/IR/3DCMM/2010
Rs 700.00
Rs 770.00
332
LASER BORING MEASUREMENT AND ALIGNMENT SYSTEM
COFMOW/IR /LLBMAS/GOC/2005 Rs. 38.00
325
VERTICAL MACHINE
326
VERTICALHONING MACHINE
METROLOLOGICAL MACHINES
327
328
329
BMA
Note – Coil Spring Scragging & Load Deflection Testing Machine with Axial Shift for LHB & IRY Coaches and Testing Machine for Yaw Dampers as New Items.
Rs 41.80
Shock Absorber
Related Documents 3m3m1z
Cofmow Compendium 5n281e
November 2019 63
Cofmow Compendium 5n281e
November 2019 221
Hyrule Compendium 1n283m
December 2019 59
Critter Compendium 5a5z5y
October 2019 122
Compendium Maleficarum.pdf 3e4mu
November 2019 73
Lasombra Compendium p5u5n
August 2022 0More Documents from "Rajiv Mahajan" 1f524s
Phil Town Rule1 3m5m57
December 2019 35
Ausstellerliste List Of Exhibitor 2012 3sk2z
November 2019 99
Cofmow Compendium 5n281e
November 2019 63
Hpbtc j3j6z
October 2021 0
Mindy Martin Case Study 1zq4w
November 2020 0