Cofmow Compendium 5n281e

INDIAN RAILWAYS CENTRAL ORGANISATION FOR MODERNISATION OF WORKSHOPS (COFMOW)

REVISED ESTIMATED COST OF MACHINERY & PLANTS FOR THE FINANCIAL YEARS 2011-12 & 2012-13

ISSUED ON 10.08.2010

IMPORTANT NOTE 1.

The list includes the latest specification number of the

equipment and its cost as estimated for the year 2011-12 & 2012-13. Railways to provide for the requisite funds and indicate specification number for indents of sanctioned M&P. 2.

The costs indicated are estimates based on the last

purchases.

The cost consists of FOR destination cost of

equipment, essential maintenance spares for two years and concomitant accessories as mentioned in the specification, and includes sales tax, excise duty at current prevailing rate, installation & commissioning charges and service tax. In case of imported equipment, cost includes CIF Mumbai as above, import duty at prevailing rate and LC charges, besides installation and commissioning charges etc. 3.

The cost indicated does not include COFMOW charges, and

D&G for the railways .

4. additional

The cost also does not include optional accessories, attachment, special toolings/fixtures as required by

the consignees.

For their estimates, consignee should consult the

likely suppliers and COFMOW.

Officer

S.No.

Machine Description

CME(P)

EOT CRANES

Capacity

Machine ID

Spec. No.

Cost in lacs Cost in lacs Yr. 2011-12 Yr. 2012-13

i) Estimated cost do not include the cost of DSL (Down Shop lead). The estimated cost per meter length of DSL is :M.S. Angle type= Rs. 2,500/- per meter and shrouded type = Rs. 3,500/- per meter. The Railways/Consignees while sending the indent should add the cost of DSL as per requirement. ii) EOT cranes with VVVF (Variable Voltage Variable Frequency) drive have lower power consumption and are relatively easier to maintain and therefore have lower life cycle cost. In case of consignee opting for VVVF drive, add10%to the initial capital cost of EOT crane. (Recommended for EOT crane of capacity 20 Ton. and above) iii) For additional feature of remote control add Rs. 2.0 lakh to capital cost. 1 EOT CRANE

2TON. ,SPAN UPTO 15M

EOT2(11M)

COFMOW/IR/EOTC/2T/2010 Rev-I

Rs.25.00

Rs.28.00

2 EOT CRANE

2TON.,SPAN FROM 16M TO 20 M 2TON.,SPAN FROM 21 M TO 30 M 3TON. ,SPAN UPTO 15M 3TON.,SPAN FROM 16M TO 20 M 3TON.,SPAN FROM 21 M TO 30 M 5TON.,SPAN UPTO 15M 5TON.,SPAN FROM 16M TO 20 M 5TON.,SPAN FROM 21 M TO 30 M 10TON.,SPAN UPTO 15M 10TON.,SPAN FROM 16M TO 20 M 10TON.,SPAN FROM 21 M TO 30 M

EOT2(16M)

COFMOW/IR/EOTC/2T/2010 Rev-I COFMOW/IR/EOTC/2T/2010 Rev-I COFMOW/IR/EOTC/3T/2010 Rev-I COFMOW/IR/EOTC/3T/2010 Rev-I COFMOW/IR/EOTC/3T/2010 Rev-I COFMOW/IR/EOTC/5T/2010 Rev-I COFMOW/IR/EOTC/5T/2010 Rev-I COFMOW/IR/EOTC/5T/2010 Rev-I COFMOW/IR/EOTC/10T/2010 Rev-I COFMOW/IR/EOTC/10T/2010 Rev-I COFMOW/IR/EOTC/10T/2010 Rev-I

Rs.26.00

Rs.29.00

Rs.30.00

Rs.33.00

Rs.31.00

Rs.34.00

Rs.33.00

Rs.36.00

Rs.36.00

Rs.40.00

Rs.38.00

Rs.42.00

Rs.40.00

Rs.44.00

Rs.44.00

Rs.48.00

Rs.44.00

Rs.48.00

Rs.60.00

Rs.66.00

Rs.70.00

Rs.77.00

15TON.,SPAN UPTO 15M 15TON.,SPAN FROM 16M TO 20 M 15TON.,SPAN FROM 21 M TO 30 M 20TON.,SPAN UPTO 15M 20TON.,SPAN FROM 16M TO 20 M 20TON.,SPAN FROM 21M TO 30 M 25TON.,SPAN UPTO 15M 25TON.,SPAN FROM 16M TO 20 M 25TON.,SPAN FROM 21 M TO 30 M 30TON. ,SPAN UPTO 15M 30TON.,SPAN FROM 16M TO 20 M 30TON.,SPAN FROM 21 M TO 30 M 35TON. ,SPAN UPTO 15M 35TON.,SPAN FROM 16M TO 20 M 35TON.,SPAN FROM 21 M TO 30 M

EOT15(13M)

COFMOW/IR/EOTC/15T/2010R ev-I COFMOW/IR/EOTC/15T/2010 Rev-I COFMOW/IR/EOTC/15T/2010 Rev-I COFMOW/IR/EOTC/20T/2010 Rev-I COFMOW/IR/EOTC/20T/2010 Rev-I COFMOW/IR/EOTC/20T/2010 Rev-I COFMOW/IR/EOTC/25T/2010 Rev-I COFMOW/IR/EOTC/25T/2010 Rev-I COFMOW/IR/EOTC/25T/2010 Rev-I COFMOW/IR/EOTC/30T/2010 Rev-I COFMOW/IR/EOTC/30T/2010 Rev-I COFMOW/IR/EOTC/30T/2010 Rev-I COFMOW/IR/EOTC/35T/2010 Rev-I COFMOW/IR/EOTC/35T/2010R ev-I COFMOW/IR/EOTC/35T/2010 Rev-I

Rs.60.00

Rs.66.00

Rs.65.00

Rs.72.00

Rs.75.00

Rs.83.00

Rs.70.00

Rs.77.00

Rs.75.00

Rs.83.00

Rs.82.00

Rs.90.00

Rs.80.00

Rs.88.00

Rs. 84.00

Rs.93.00

Rs. 92.00

Rs.101.00

Rs.105.00

Rs.115.00

Rs.110.00

Rs.121.00

Rs.120.00

Rs.132.00

Rs.125.00

Rs.138.00

Rs.130.00

Rs.143.00

Rs.140.00

Rs.155.00

3 EOT CRANE 4 EOT CRANE 5 EOT CRANE 6 EOT CRANE 7 EOT CRANE 8 EOT CRANE 9 EOT CRANE 10 EOT CRANE 11 EOT CRANE 12 EOT CRANE 13 EOT CRANE 14 EOT CRANE 15 EOT CRANE 16 EOT CRANE 17 EOT CRANE 18 EOT CRANE 19 EOT CRANE 20 EOT CRANE

CME(P) 21 EOT CRANE 22 EOT CRANE 23 EOT CRANE 24 EOT CRANE 25 EOT CRANE 26 EOT CRANE 27 EOT CRANE

EOT2(22M) EOT3(14M) EOT3(17M) EOT3(23M) EOT5(15M) EOT5(20M) EOT5(25M) EOT10(11M) EOT10(16M) EOT10(24M)

EOT15(17M) EOT15(25M) EOT20(11M) EOT20(19M) EOT20(25M) EOT25(14M) EOT25(18M) EOT25(25M) EOT30(14M) EOT30(18M) EOT30(22M) EOT35(12M) EOT35(17M) EOT35(25M)

28 EOT CRANE

40TON. ,SPAN UPTO 15M

EOT40(12M)

COFMOW/IR/EOTC/40T/2010 Rev-I

Rs.156.00

Rs.172.00

29 EOT CRANE

40TON.,SPAN FROM 16M TO 20 M 40TON.,SPAN FROM 21 M TO 30 M 50TON. ,SPAN UPTO 15M 50TON.,SPAN FROM 16M TO 20 M 50TON.,SPAN FROM 20 M TO 30 M 65TON. ,SPAN UPTO 15M 65TON.,SPAN FROM 16M TO 20 M 65TON.,SPAN FROM 21 M TO 30 M

EOT40(19M)

Rs.160.00

Rs.176.00

Rs.170.00

Rs.187.00

Rs.176.00

Rs.194.00

Rs.182.00

Rs.200.00

Rs.195.00

Rs.215.00

Rs.218.00

Rs.239.00

Rs.225.00

Rs.247.00

EOT65(25M)

COFMOW/IR/EOTC/40T/2010 Rev-I COFMOW/IR/EOTC/40T/2010 Rev-I COFMOW/IR/EOTC/50T/2010 Rev-I COFMOW/IR/EOTC/50T/2010 Rev-I COFMOW/IR/EOTC/50T/2010 Rev-I COFMOW/IR/EOTC/65T/2010R ev-I COFMOW/IR/EOTC/65T/2010 Rev-I COFMOW/IR/EOTC/65T/2010

Rs.240.00 Rev-I

Rs.262.00

GOLIATH CRANES 37 GOLIATH CRANE

5TON,SPAN,15,25 M

GC 5

COFMOW/IR/EOTC/G/5/2009

Rs.72.00

Rs.79.00

38 GOLIATH CRANE

15TON,SPAN,11.0 M

GC 15

COFMOW/IR/EOTC/G/15/2009

Rs.148.00

Rs.160.00

39 GOLIATH CRANE

15TON,SPAN,15.00 M

GC15

COFMOW/IR/EOTC/G/15/2009

Rs.184.00

Rs.202.00

30 EOT CRANE 31 EOT CRANE 32 EOT CRANE 33 EOT CRANE 34 EOT CRANE 35 EOT CRANE 36 EOT CRANE

CME(P)

EOT CRANES WITH UNDERHUNG JIB 40 EOT CRANES WITH 5 TON.SPAN,11.0 M UNDERHUNG JIB 41 EOT CRANES WITH 5 TON.,SPAN,23.0 M UNDERHUNG JIB

CME(P)

EOT40(25M) EOT50(15M) EOT50(18M) EOT50(25M) EOT65(15M) EOT65(18M)

EOTCUHJ5(11 COFMOW/IR/EOTC/5T(UNDER Rs.91.00 M) HUNG JIB)/2003

Rs.100.00

EOTCUHJ5,(23 COFMOW/IR/EOTC/5T(UNDER Rs.118.00 M) HUNG JIB)/2003

Rs.130.00

COFMOW/IR/EOTC/25X2/(TWI Rs.250.00 N CRAB)/2010 COFMOW/IR/EOTC/42.5X2/(T Rs.330.00 WIN CRAB)/2010

Rs.275.00

TWIN CRAB EOT CRANES 42 TWIN CRAB EOT CRANE 43 TWIN CRAB EOT CRANE

50 TON.,SPAN,21.5 M

TCC 50

85 TON.SPAN 17.50 M

TCC 85

44 TWIN CRAB EOT CRANE 45 TWIN CRAB EOT CRANE

100 TON.SPAN 25. M appxox

TCC100

COFMOW/IR/EOTC/42.5X2/(T WIN CRAB)/2010

Rs.375.00

Rs.412.00

60TON.SPAN 17.50 M

TCC 60

COFMOW/IR/EOTC/42.5X2/(T WIN CRAB)/2010

Rs.260.00

Rs.285.00

Rs.365.00

CME(P)

TRAVERSERS i) Estimated cost do not include the cost of DSL (Down Shop Lead ). The estimated cost per meter length of DSL is : M.S. Angle type= Rs.2,500/- per meter and shrouded type= Rs.3,500/- per meter. The Railways/Consignees while sending the indents should add the cost of DSL as per requirement ii)The estimated cost of DSL with masts is about Rs. 20000/- per meter bay length.The railway while sending the indent shall add the cost per meter requirement . iii) Traversers with VVVF (Variable Voltage Variable Frequency) drives have lower power consumption and are relatively easier to maintain and therefore have lower life cycle cost. In case of consignee opting for VVVF drive, add10%to the initial capital cost of traversers.

CME(P)

PIT TYPE TRAVERSERS 46 PIT TYPE TRAVERSERS 47 PIT TYPE TRAVERSERS 48 PIT TYPE TRAVERSERS SURFACE TRAVERSER 49 SURFACE TRAVERSER

75TON. (2 track) without TRAVP2T75 portal

COFMOW/IR/MH/TRAV/2010

Rs.210.00

Rs.231.50

80TON. (Multi track)

TRAVPMT80

COFMOW/IR/MH/TRAV/2010

Rs.210.00

Rs.231.50

100TON. (Multi track)

TRAVPMT100 COFMOW/IR/MH/TRAV/2010

Rs.220.00

Rs.242.00

35TON. (Multi track)

TRAVSMT35

COFMOW/IR/MH/TRAV/2010

Rs.100.00

Rs.110.00

50 SURFACE TRAVERSER

50TON. (2track)

TRAVS2T50

COFMOW/IR/MH/TRAV/2010

Rs.170.00

Rs.187.00

51 SURFACE TRAVERSER

70TON. (2track)

TRAVS2T70

COFMOW/IR/MH/TRAV/2010

Rs.195.00

Rs.215.00

52 SURFACE TRAVERSER

80TON. (2track)

TRAVS2T80

COFMOW/IR/MH/TRAV/2010

Rs.220.00

Rs.242.00

53 SURFACE TRAVERSER

CME(P)

CME(P)

80TON. (Multi track)

DIESEL HYD. ROAD MOBILE CRANES 54 ARTICULATING 5 TON. TYPE

TRAVSMT80

COFMOW/IR/MH/TRAV/2010

Rs.190.00

Rs.210.00

RMCART5

COFMOW/IR/DH-RMC/ART5T/2009

Rs.10.00

Rs.11.00

55 ARTICULATING TYPE

8TON.

RMCART8

COFMOW/IR/DH-RMC/ART8T/2009

Rs.11.00

Rs.12.00

56 ARTICULATING TYPE

10 TON.

RMCART10

COFMOW/IR/DH-RMC/ART10T/2009

Rs.12.00

Rs.13.00

57 ARTICULATING TYPE

12 TON.

RMCART12

COFMOW/IR/DH-RMC/ART12T/2009

Rs.17.00

Rs.19.00

58 ARTICULATING TYPE

15TON.

RMCART15

COFMOW/IR/DH-RMC/ART15T/2009

Rs.28.00

Rs.31.00

59 FULL SLEW TYPE

10 TON.

RMCSLEW10

Rs.105.00

60 FULL SLEW TYPE

12TON.

RMCSLEW12

COFMOW/IR/DH-RMC/SLEW - Rs95.00 10T/2010 COFMOW/IR/DH-RMC/SLEW Rs.100.00 –12T/2010

61 FULL SLEW TYPE

15TON.

RMCSLEW15

COFMOW/IR/DH-RMC/SLEW –15T/2010

Rs110.00

Rs.121.00

62 FULL SLEW TYPE

16TON.

RMCSLEW16

COFMOW/IR/DH-RMC/SLEW –16T/2010

Rs.120.00

Rs.132.00

63 FULL SLEW TYPE

18TON.

RMCSLEW18

COFMOW/IR/DH-RMC/SLEW –18T/2010

Rs.130.00

Rs.143.00

64 FULL SLEW TYPE

20TON.

RMCSLEW20

COFMOW/IR/DH-RMC/SLEW –20T/2010

Rs.150.00

Rs.165.50

65 FULL SLEW TYPE

40TON.

RMCSLEW40

COFMOW/IR/DH-RMC/SLEW –40T/2010

Rs.240.00

Rs.264.00

Rs.110.00

SYNCHRONISED LIFTING JACKS 66 SYNCHRONISED LIFTING JACKS ELECTRICAL OPERATED SCREWJACKS (SET OF 5 JACKS)

15 TON.

SJE 15

COFMOW/IR/SJE/15/2010

Rs.28.00

Rs.30.00

67 SYNCHRONISED LIFTING JACKS ELECTRICAL OPERATED SCREWJACKS (SET OF 5 JACKS)

25TON.

SJE 25

COFMOW/IR/SJE/25/2010

Rs.30.00

Rs.33.00

68 SYNCHRONISED 35 TON. LIFTING JACKS OPERATED ELECTRICALSCRE W JACKS (SET OF 5 JACKS) 69 SYNCHRONISED 45 TON. LIFTING JACKS ELECTRICAL OPERATED SCREWJACKS (SET OF 5 JACKS)

SJE 35

COFMOW/IR/SJE/35/2010

Rs.40.00

Rs.44.00

SJE 45

COFMOW/IR/SJE/45/2010

Rs.75.00

Rs.83.00

TL

COFMOW/IR/TL/1.85/’1996

Rs.183.00

Rs.201.00

CWL

COFMOW/IR/TL/1.6/’1996

Rs.225.00

Rs.248.50

LOADERS 70 TRACK LOADER (BACKHOE TYPE)

1.85 CUM

71 CRAWLER LOADER 1.6 CUM

CME(P)

72 FRONT END LOADER 73 FRONT END LOADER 74 FRONT END LOADER 75 LOADER CUM EXCAVATOR 76 SKID STEER LOADER DISASTER MANAGEMENT

0.7 CUM

FELO.7

COFMOW/IR/FEL/0.7/’2000

Rs.20.00

Rs.22.00

1.0 CUM

FEL1.0

COFMOW/IR/FEL/1.0/’2001

Rs.35.00

Rs.39.00

1.7 CUM

FEL1.7

COFMOW/IR/FEL/1.7/’2001

Rs.45.00

Rs.50.00

1.0/0.18 CUM

FELCE/1.0/0.1 COFMOW/IR/FELCUM Rs.42.00 8 EXCAVATOR/1.0/0.18/1600/200 SSL COFMOW/IR/SSL/700/0.35/200 Rs.22.00 2

Rs.46.00

55TON

AIRBAG55

COFMOW/IR/AIR BAG/2009

Rs.9.00

Rs.10.00

130TON

AIRBAG130

COFMOW/IR/AIR BAG/2009

Rs.25.00

Rs.28.00

LWET

COFMOW/IR/Light weight elect. Rs.8.0 Tools/2005

Rs.9.0

80 SYNTHETIC ONE SET (Consisting of 1 No. of each size) PACKING 1000X 300X 250mm ,1000X 300X 200mm , 1000X 300X100mm

SPACK

COFMOW/IR/Synthetic Packing/2007

Rs.1.1

Rs.1.2

81 UNDERWATER CUTING EQUIPMENT

UW CUTTING

COFMOW/IR/Underwater cutting/2005

Rs.7.00

RS.8.00

82 WATER MIST FIRE FIGHTING EQUIPMENT (BACKPACK TYPE)

WMFF

COFMOW/IR/Water Mist Fire Fighting/2008

Rs.7.00

Rs.8.00

83 INFLATABLE TENT

TENT

Rs.10.00

Rs.11.00

84 HYDRAULIC RESCUE DEVICE (IMPORTED)

HRD

COFMOW/IR/Inflatable tent/2005 COFMOW/IR/HRD/2010

Rs.18.00

Rs.20.00

85 HYDRAULIC RERAILLING RAIL CUM ROAD VEHICLE

HRE

COFMOW/IR/RRE/2009

Rs.73.00

Rs.80.00

RRV

COFMOW/IR/RRV(With crane cum HRD & Fire Fighting)/2005

Rs.1150.00

Rs.1250.00

600T

RRVS

COFMOW/IR/600T/2007

Rs.300.00

Rs.330.00

75T

BD

COFMOW/IR/BD/2007

Rs.350.00

Rs.385.00

12 TON.

BD

COMOW/IR/SSTS/2009

Rs.130.00

Rs.143.00

77 INFLATABLE AIR BAG 78 INFLATABLE AIR BAG (ROUND TYPE) 1SET OF 2NOS. 79 LIGHT WEIGHT ELECTRIC TOOLS SET

0.35 CUM

86 RAIL CUM ROAD VEHICLE WITH CRANE,HRE,HRD, FIRE FIGHTING EQUIPMENT 87 RAIL CUM ROAD VEHICLE (SHUNTING VEHICLE)

Rs.24.50

BULLDOZER 88 DIESEL HYD. BULLDOZER 89 DIESEL HYD. BULLDOZER SHELL SKIN TENSONING 90 SHELL SKIN TENSONING

SSTS

DY.CEE

ELECTRICAL EQUIPMENTS 91 DYNAMIC BALANCING MACHINE

100 Kg.

DBM 100

COFMOW/IR/DYN BAL100/05(R-I)

Rs.9.76

Rs10.73

92 DYNAMIC BALANCING MACHINE

3000 Kg.

DBM 3000

COFMOW/IR/DYN BAL3000/2008

Rs.7.24

Rs.7.94

93 DYNAMIC WHEEL BALANCING MACHINE

3000 Kg.

DWBM 100

COFMOW/IR/M- WBM/2005

Rs.24.09

Rs.26.50

94 DIESEL GENERATATING SETS

160KVA

DGS160

COFMOW/IR/DG Set-2008

Rs.17.32

Rs.19.05

95 DIESEL GENERATATING SETS 96 DIESEL GENERATATING SETS

250KVA

DGS250

COFMOW/IR/DG Set-2008

Rs.23.93

Rs.26.32

320KVA

DGS320

COFMOW/IR/DG Set-2008

Rs.31.16

Rs.34.28

97 DIESEL GENERATATING SETS

500KVA

DGS500

COFMOW/IR/DG Set-2008

Rs.49.40

Rs.54.34

98 TRANSFORMER OIL FILTRATION PLANT

3000LPH

HVTOP 3000

COFMOW/IR/ HVTOP/2007

Rs.20.50

Rs.22.50

99 TRANSFORMER OIL FILTRATION PLANT

5000LPH

HVTOP 5000

COFMOW/IR/ HVTOP/2007

Rs.25.81

Rs.28.39

AUTOCSM

COFMOW/IR/ CABLE & STRIP/ Rs.179.00 2005

Rs.196.00

EAF

COMOW/IR/M/EAF/2005

Rs.1573.68

ETCDSL

COFMOW/IR/ETC/DSL(BG)/200 Rs.11.62 5

Rs.12.78

ETF

COFMOW/IR/ETF/2006

Rs.49.82

Rs.54.82

ICB

COFMOW/IR/I CBT/2005

Rs.14.72

Rs.16.23

100 AUTOMATIC CUT AND STRIP MACHINE 101 ELECTRIC ARC FURNANCE

40T

102 ELECTRONIC TEST CONSOLE FOR DIESEL LOCOMOTIVES (BG) 103 ELECRRIC TEMPRING FURNANCE

500Kg.

104 INCIRCUIT PCB TESTER

Rs.1430.62

105 INDUCTION HARDENING MACHINE

200KW

IHM200

COFMOW/IR/Induction hardening/ 200KW/MF/2006

Rs.302.50

Rs.332.75

106 INDUCTION HARDENING MACHINE

50KW

IHM50

COFMOW/IR/Induction hardening/ 50KW/MF/2007

Rs.53.49

Rs.58.82

107 STATIC WEIGH BRIDGE (RAIL)

100MT

RWB100

COFMOW/IR/WB/ 2007

Rs.18.50

Rs.20.35

108 STATIC WEIGH BRIDGE (ROAD)

100MT

RDWB100

COFMOW/IR/WB/ 2007

Rs.25.61

Rs.28.17

109 STATIC WEIGH BRIDGE (ROAD)

50MT

RDWB50

COFMOW/IR/WB/ 2007

Rs.15.77

Rs.17.35

110 STATIC WEIGH BRIDGE (ROAD)

30MT

RDWB30

COFMOW/IR/WB/ 2007

Rs.14.02

Rs.15.42

DY.CEE

100MT 111 STATIC WEIGH BRIDGE (RAIL CUM ROAD)

RRWB100

COFMOW/IR/WB/ 2007

Rs.29.62

Rs.32.31

400AMP 112 SEMIAUTOMATIC MIG/MAG WELDING THYSISTER MACHINE

MIG/MAG 400

COFMOW/IR/WP (MIG/MAG/400/2005

Rs.1.57

Rs.1.73

600AMP 113 SEMIAUTOMATIC MIG/MAG WELDING THYSISTER MACHINE

MIG/MAG 600

COFMOW/IR/WP (MIG/MAGCO2)/ 600/2000

Rs.2.32

Rs.3.10

1200AMP 114 SEMIAUTOMATIC SUBMERGESD ARC WELDING PLANT

SWP

COFMOW/IR/SEMI/SAW/1200/2 Rs.19.09 007

Rs.21.0

115 VEHICLE CONTROL UNIT TEST JIG

VCU

COFMOW/IR/VCU/2006

Rs.133.50

Rs.146.89

116 (a)

WHEEL IMPACT LOAD DETECTOR (INDIGENOUS)

INDIGENOUS

WILD

COFMOW/IR/WILD/2006

Rs.102.00

Rs112.00

116 (b)

WHEEL IMPACT LOAD DETECTOR (IMPORTED)

IMPORTED

WILDIM

COFMOW/IR/WILD/2006

Rs.360.00

Rs390.00

117 FULLY AUTOMATIC TAN DELTA TEST SET 118 SEMI AUTOMATIC TAN DELTA TESTING MACHINE12KV

ATDTS

COFMOW/IR/ATDTS-2K

Rs.7.26

Rs.7.98

SATDTS

COFMOW/IR/TDTS-1/1994

Rs.4.48

Rs4.93

119 TEST CONSOLE FOR TESTING DC TRACTION MOTOR FOR NO LOAD TEST

TMTCNL

COFMOW/IR/ETE-TMTC-11/1994

Rs.23.00

25.3

120 TEST CONSOLE FOR TESTING DC TRACTION MOTOR FOR ON LOAD TEST

TMTCOL

COFMOW/IR/E- TMTC/2000

Rs.107.38

Rs.118.11

121 VACUUM DRYING PLANT

VDP

COFMOW/IR/VDP-1/96

Rs.93.36

Rs.102.69

122 VACUUM PRESSURE IMPREGNATION PLANT

VPIP

COFMOW/IR/VPIP/2000

Rs.152.90

Rs.168.19

123 VACUUM PRESSURE IMPREGNATION PLANT FOR HITACHI TRACTION MOTOR

VPIPHMT

COFMOW/IR/VPIP/1/1995/Hitac Rs.207.89 hi

Rs.228.67

ASWP

COFMOW/IR/SAW/1200/1999/R- Rs.33.25 1

Rs.36.57

TRACTION MOTOR SHOP MACHINES

124 AUTOMATIC SUBMERGED ARC WELDING PLANT

1200AMP

125 PULSE MIG WELDING PLANT

450AMP

PMIGW

COFMOW/IR/PULSE/WP(MIGM Rs.10.04 AG-CO2-450A)/2007

Rs.11.27

127 PULSE MIG WELDING PLANT

400AMP

PMIGW 400

COFMOW/IR/Pulse/WP(MIGMAG- CO2-400A)/ 2007

Rs.5.21

Rs.5.73

128 SEMI AUTOMATIC 400AMP CO2 WELDING PLANT (INVERTOR BASED)

SAWP

COFMOW/IR/Synergic/WP(MIG- Rs.4.28 MAG CO2/2007

Rs.4.71

129 TIG WELDING MACHINE

250AMP

TWP

COFMOW/IR/AC-DC TIG WP/2006

Rs.7.56

130

SPOT WELDING 300KVA MACHINE

WMS

COFMOW/IR/SOTWELD/ Rs48.41 1999

131

WELD STRIPPING MACHINE

WSM

COFMOW/IR/WSM/BSW P/2001

Rs. 75.21

Rs. 82.74

COFMOW/IR/MT/AG-3/2005Rev-II

Rs.330.00

Rs.363.00

Rs.6.87

Rs.53.25

Dy.CME-I AXLE SHOP MACHINE 132 CYLINDRICAL AXLE Length-3000mm.max. Dia-CNCAGM 300mm max. GRINDING MACHINE (INDIGENOUS CNC)

133 CNC AXLE TURNING LATHE IMPORTED

Surface finish= 0.8 micron Ra(min.)

CNCATLIMP

COFMOW/IR/CNC/ATLIII/3000X600/2006Rev.-II/2010

Rs.716.00

Rs.788.00

134 CNC AXLE TURNING LATHE IDIGENOUS

Surface finish1.6 micron to3.2 micron

CNCATLIND

COFMOW/IR/CNC/ATL/3000x30 Rs.200.00 0/2006 (Rev-II)/2010

Rs.220.00

135 DOUBLE END MILL Length of comp. 300mm AND CENTRE M/C to 1250mm /diameter of comp. 25mm to 125mm

DEMC

COFMOW/IR/FCDT/2005

Rs.100.00

Rs.110.00

136 HORIZONTAL DRILLING & TAPPING MACHINE SINGLE ENDED

Length of axle 2700mm max. & 2200mm min. diameter of axle 300mm & 100mm

DTMH

COFMOW/IR/CDT/AXLE/2005

Rs.100.00

Rs.110.00

137 AJTB (BG)

Track gauge 1676mm, AJTBBG tread dia 1225-750mm, axle length 2650-2200mm

COFMOW/IR/MT/JTB-3R5/2004

Rs.194.00

Rs.213.00

138 AJTB (BG/MG/NG)

Track gauge 1676AJTBBGMGNG COFMOW/IR/MT/JTB/BG/MG& Rs.199.00 762mm, tread dia 1225NG/2008 495mm, axle length 26501100mm

Rs.219.00

139 AJTB (BG/MG)

Track gauge 1676-1000, AJTBBGMG tread dia 1225-600mm, axle length 2650-1500mm

Rs.216.00

METROLOGICAL INSTRUMENT

COFMOW/IR/MT/JTB7/98/Rev.I/2005

Rs.196.00

140 OPTICAL PROFILE Screen diameter 500mm OPP PROJECTOR magnification (VERTICAL TYPE)

COFMOW/IR/OPP/2002

Rs.21.00

Rs.23.00

IVS

COFMOW/IR/IVS/2006/Rev.II

Rs.47.00

Rs.52.00

LAPCH

COFMOW/IR/Cyl. Head lap/2004/Rev-II/2010

Rs.22.00

Rs.24.00

PLMB

COFMOW/IR/Bar Peeling Machine/2003

Rs.631.00

Rs.693.00

COFMOW/IR/Laser Tool Marking/2003

Rs.75.00

Rs.83.00

COFMOW/IR/Baking Oven/Rly. Coach/2004

Rs.171.00

Rs.188.00

COFMOW/IR/Surface Painting Booth/enger Coach/2002

Rs.434.00

Rs.478.00

147 COMPLETE (i) SPRAY BOOTH-1 no. PBDO PAINTING SYSTEM ext. size FOR RLY. 30M(L)x10m(W)x 11(H) ENGER (ii) DRYING OVEN-01 no. COACH

COFMOW/IR/PB&BO/Rly. Coach/2007

Rs.787.00

Rs.865.00

148 PRIMARY PAINTING PLANT FOR RAIL COACH SPRING (DIP PAINTING TYPE)

PPP

COFMOW/IR/Primary Paint Plant/Coil Spring/2003

Rs.225.00

Rs.247.00

149 CNC AIR PLASMA 1x32x6000x3000 CUTTING MACHINE

APCM

COFMOW/IR/CNC/APCM/Portal Rs.136.00 /3000x6000/2/KRev.I/2005 (Turn key)

Rs. 150.000

150 CNC AIR PLASMA 3 torch x32x9000x3500. CUTTING MACHINE (3 torch, imported machine)

APCM 3T

COFMOW/IR/CNC/APCM/Portal Rs.619.00 /3000x6000/2/KRev.II/2008 (Turn key)

Rs. 681.00

COFMOW/IR/PGCM/Portal/3000 Rs.70.00 /99/Rev.III/2007

Rs.77.00

FLOOR CLEANING MACHINE 141 INDUSTRIAL VACUUM SWEEPER WITH CABIN

1800mm sweep

LAPPING MACHINE 142 CYLINDER HEAD LAPPING MACHINE

BAR PEELING MACHINE 143 BAR PEELING M/C

Bar dia 16-60mm length

TOOL MARKING MACHINE MIN. 10 W DIODE PUMP TMML 144 LASER TOOL MARKING MACHINE SOLID TYPE MULTIMODE ND YAG LASER 110X110MM RANGE PAINTING EQUIPMENT 145 BAKING OVEN FOR Size (max.) length-30m RLY. ENGER Width-10m Height-11m COACH (on turnkey basis)

146 SURFACE PAINTING BOOTH FOR RLY. ENGER COACH

BO

Internal size 31m(L)x 7m PB (W)x 6m (H) max

PROFILE CUTTING MACHINES

DY CMEI

151 CNC GAS PROFILE 4 Torch 75mm thickness CNCGPCM CUTTING MACHINE

4KW , ThicknessCNCLCM 3000 COFMOW/IR/Laser Cutting152 CNC LASER II/2005 CUTTING MACHINE 20mm(MS),16mm (Corten steel), 10mm(SS) Table size- 3000(W)X (12000+1200) (L)

Rs.1168.00

Rs.1284.00

4KW, Thickness153 CNC LASER CUTTING MACHINE 20mm(MS),15 MM (Corten steel), 8mm(SS)Sheet size4000mmX2000mm

Rs.900.00

Rs.990.00

5KW ThicknessCNCLCM6500 COFMOW/IR/ Laser Cutting154 CNC LASER CUTTING MACHINE 22mm(MS),15mm II/2001/Rev-I/2008 (Corten steel), 8mm(SS) Sheet size- 6000mm X3000mm

Rs.1250.00

Rs.1375.00

Max. sheet size 2mx4m 155 CNC LASER CUTTING & Thickness 0.8-3mm WELDING MACHINE MACHINE BED SIZE 6X2.5 MM

CNC LW&CM

COFMOW/IR/Laser cutting & welding/2004/Rev-I/2008

Rs.2500.00

Rs.2750.00

4 Torch Thickness= 156 GAS PROFILE CUTTING MACHINE 100mm

GPCM

COFMOW/IR/PGCM/Cantiportal/ Rs.19.00 92-R4/2004 (Turnkey)

Rs.21.00

COFMOW/IR/CNC//APCM/UND Rs.500.00 ER WATER/2007

Rs.550.00

RBWM

COFMOW/IR/WLD/ Robot /2004 Rs.570.00 / Rev.I /2007

Rs.627.00

RBWM – EB

COFMOW/IR/WLD/Robot /DMW Rs.605.00 /R-1/2007

Rs.665.00

COFMOW/IR/Bead Blast/ Cylinder Liner/2002

Rs.55.00

Rs.61.00

CNCLCM4000 COFMOW/IR/Laser CuttingII/2001/Rev-I/2008

2 torch X32 thickX (8500+ PCMUW 157 CNLASMA PROFILE CUTTING 6300)X 3000 bed size. MACHINE (UNDER WATER)

DY.CME-I

ROBOTIC WELDING 158 Bogie bolster and bogie frame welding machine 159 Robotic Welding Machine for engine block

2 no. of robots, welding fixtures and welding positioner For loco engine block, 1 no. of Robot, 1 work positiioner

SURFACE PREPARATION SYSTEM Dia of table 1200mm load BBCL 160 BEAD BLASTING MACHINE cap. 500kg. No. of satellite on main indexing turn table-4 161 AIRLESS CENTRIFUGAL GRIT BLASTING PLANT 2 TURBINE WHEEL, INLET & EXIT POWERISED ROLLER

CSBP(2TUR)

COFMOW/IR/GBP/2003

Rs.78.00

Rs.86.00

162 AIRLESS CENTRIFUGAL SHOT BLASTING PLANT 4 TURBINE WHEEL, INLET & EXIT POWERISED ROLLER

CSBP(4TUR)

COFMOW/IR/SBP/2002/Rev-I/ 2005

Rs.90.00

Rs.99.00

COFMOW/IR/CS/SB/97(RevII)2003/2007

Rs.55.00

Rs.61.00

COFMOW/IR/Bogie Frame/SB/2003/Rev-I/2004

Rs.187.00

Rs.206.00

163 AIRLESS CENTRIFUGAL SHOT BLASTING PLANT FOR COIL SPRING

Spring diameter 70CSSB 400mm Free height 150700mm Weight of Spring 3.3-80kg.

Job size GBPBF 164 GRIT BLASTING PLANT FOR BOGIE 4244x2947x800mm Max. FRAME (AIRLESS wt.-1500kg. ROTOR TYPE)

Cabinet size 165 GRIT BLASTING PLANT FOR DIESEL 1mx1mx1.5m(H) ENGINE CYLINDER LINERS

GBPDSL

COFMOW/IR/SBP/2/94 Rev.I/2003

Rs.33.00

Rs.36.00

166 RAIL SHOT BLASTING MACHINE 167 SHOT BLASTING PLANT (SWING TABLE TYPE) 168 SHOT BLASTING PLANT (SWING TABLE TYPE)

RSBM

COMOW/IR/RSBM/2002

Rs.79.00

Rs.87.00

Table diameter 1200mm, RTSBM 1200 table speed 4 to 5RPM

COFMOW/IR/RTSBM/2003/Rev- Rs.24.00 III/2010

Rs.27.00

Table diameter 1800mm RTSBM 1800 table speed 3-4RPM

COFMOW/IR/SBM /Swing table- Rs.33.00 1828mm (72inch) 2003/RevI/2005

Rs.37.00

169 SHOT BLASTING PLANT (SWING TABLE TYPE)

Table diameter 2400mm RTSBM 2400 table speed 3 to 4RPM

COFMOW/IR/SBM/Swing Table- Rs.40.00 96 inch/r-2/2006

Rs.44.00

170 COMBINED AIRLESS CENTRIFUGAL SHOT BLASTING & SHOT PEENING PLANT FOR COIL SPRING & LAMINATED SPRING COIL

Coil spring diameter-70 to SB&PM 475mm/ Max. length of laminated spring-1862 mm/ free height-150 to 900mm /Max. width of laminated spring-120mm

COFMOW/IR/CS/SP/97/RevI/2006

Rs.90.00

171 COACH SHOT BLASTING PLANT (AIRLESS ROTOR TYPE WITH 16 ROTORS)

COFMOW/IR/Shot Rs.660.00 Blast/Rly.Coach/2002/rev-II/2009

Rs.716.00

Bolt Cap-1/4”-4” PipeCap- TMPB 1/4”-4”

COFMOW/IR/ Screwing/2006

Rs.43.00

Rs.47.00

Pipe dia 10-90mm, pipe thickness 4mm, length 6mtr.

PBM

COFMOW/IR/Pipe Bending (CNC)/90mm/2008

Rs.172.00

Rs.190.00

BMA

COFMOW/IR/MT/ABM/1/90/Rev- Rs. 61.00 I

Rs.67.00

175 FULLY AUTOMATIC COMMUTATOR MICA UNDER CUTTING & DEBURRING M/C

CMUM

COFMOW/IR/MT/AMUD/R299/(Rev-2)/2006

Rs.55.00

Rs.61.00

176 COMMUTATOR TURNING & POLISHING

CT&P

COFMOW/IR/MT/CTL-2/97/Rev- Rs.71.00 II/2009

Rs.78.00

177 UNIVERSAL MULTIPURPOSE ARMATURE MACHINE

UAM

COFMOW/IR/MT/UAM-1-90/Rev- Rs.95.00 V/ 2007 (turnkey)

Rs.102.00

COFMOW/IR/CL3000X1500/2005

Rs.94.00

THREADING MACHINES 172 SCREWING/BOLT OR PIPE THREADING MACHINE 173 CNC Pipe Bending machine

DY CMEI

SBP(COACH)

Rs.82.00

TRACTION MOTOR SHOP MACHINES 174 ARMATURE BINDING MACHINE

TURNING CENTRE 178 HEAVY DUTY TURNING LATHE

Turning diameterTLHD 1500mm Turning length3000mm

Rs.85.00

DY.CME-II CLEANING AND WASHING PLANTS 179 AXLE BOX CLEANING PLANT 180 BOGIE (BG) WASHING PLANT 181 COACH WASHING PLANT 182 BEARING CLEANING PLANT 183 *ENGINE BLOCK WASHER VERTICAL TURNING LATHES Table dia 1200mm For 184 CNC VERTICAL TURNING LATHE wheels 185 CNC VERTICAL TURNING LATHE 186 CNC VERTICAL TURNING AND BORING MACHINE & WHEEL HANDLING SYSTEM WITH CONVEYORS AND MANIPULATOR

DY.CME-II

AB

COFMOW/IR/M/ AB-/2010

Rs.150.00

Rs.165.00

BC

COFMOW/IR/M-BWP/2001

Rs.580.00

Rs.638.00

CW

COFMOW/IR/M/-CWP/2010

Rs.500.00

Rs.550.00

RB

COFMOW/IR/M/B/2010

Rs.190.00

Rs.209.00

EBW

COFMOW/IR/EBW/ 2010

Rs.600.00

Rs.660.00

CNCVTL1200

COFMOW/CNC/ VTL-1200/2010 Rs.309.00

Rs.340.00

COFMOW/IR/CNC/VTL800/2007 COFMOW/IR/CNC/VTBM1600/2007

Rs.309.00

Rs.340.00

Rs.532.00

Rs.585.00

Table dia 800mm for CNCVTL800 components Table dia 1400 mm (For CNC VTBM RWF)

187 VERTICAL TURRET Table dia 1200mm LATHE

VTL1200

COFMOW/IR/M/ VTL-1200/2007 Rs.176.00

Rs.194.00

188 VERTICAL TURRET Table dia 1500mm LATHE Table dia 1400mm 189 *VERTICAL TURRET LATHE FOR WHEEL MACHINING BOILERS AND FURNACES 190 OIL FIRED BOILER 2000kg./hr.

VTL1500

COFMOW/IR/M/ VTL/2006

Rs.208.00

Rs.229.00

VTL1400

COFMOW/IR/VTL/WM1400/2010

Rs.190.00

Rs.209.00

OFB2000

COFMOW/IR/M-OFB/2000/2002 Rs.64.00

Rs.70.00

OFB4000

COFMOW/IR/M-OFB/4000/2008 Rs.89.00

Rs.98.00

OFF700

Rs.42.00

Rs.47.00

SRF12T

COFMOW/IR/M-OF/ FUR/700Kg/ 2007 COFMOW/IR/OF/ SRF/2007

Rs.110.00

Rs.121.00

Cap 2 Ton 194 OIL FIRED BOGIE HEARTH FURNACE

BHF2T

COFMOW/IR/OFF/Bogie/2007

Rs.61.00

Rs.67.00

195 BOGIE HEARTH FURNACE

BHFF3T

COFMOW/IR/M-OF/BHF/2006

Rs.66.00

Rs.73.00

196 *OIL FIRED BOGIE Cap.10 Ton (chamber HEARTH FURNACE size in mm 8000 Lx WITH MOTORISED 3350Wx 1500H) CUM MANNUAL TROLLEY DRIVEN SYSTEM

BHF10T(MT)

COFMOW/IR/OFF/ Bogie/2009

Rs.98.00

Rs.108.00

Cap.10TON 197 OIL FIRED BOGIE HEARTH FURNACE

BHF10T

COFMOW/IR/OFF/Bogie/2007

RS.80.00

RS.88.00

198 *OIL FIRED BOGIE Cap.10 Ton (chamber HEARTH FURNACE size in mm 8000 Lx 2000Wx 1500H)

BHF10T

COFMOW/IR/OFF/ Bogie/2009

Rs.73.00

Rs.80.00

199 *OIL FIRED BOGIE Cap.12 TON (chamber HEARTH FURNACE size in mm 10000 Lx2500Wx 2000H)

BHF12T

COFMOW/IR/OFF/ Bogie/2009

Rs.70.00

Rs.77.00

191 OIL FIRED BOILER

4000kg./hr.

700kg. 192 OIL FIRED FURNACE 193 STRESS RELIVING Cap12 Ton FURNACE

Cap.3 Ton

SIMULATOR 200 SIMULATORS IN MOTION TYPE

SIMIM

201 DOUBLE COLUMN Length - 14000mm Width PL(Heavy) PLANING MACHINE - 1600mm, (2NOS PLANING, 1NO MILLING & 1 NO GRINDING) 202 DOUBLE COLUMN Length- 4500mm Width- PL PLANING MACHINE 1600mm,(2 nos. planing, 1 no. milling & 1 no. grinding heads)

COFMOW/IR/M-SIM-2007(Rev- Rs.1868.00 1)

Rs.2055.00

COFMOW/IR/PL/14000X1600/2 Rs.333.00 004

Rs.366.00

COFMOW/IR/PL/4500X1600/20 Rs.363.00 06

Rs.399.00

DY.CME-II STRAGHTENING MACHINES 203 PLATE STRAIGHTENING MACHINE

Plate thickness (1025mm & width 2500mm P441n/mm2 (S.S)

PSM(10-25)

COFMOW/IR/IP/PSM/2010

Rs.800.00

Rs.880.00

204 PLATE STRAIGHTENING MACHINE

Plate thickness 8-16mm & width 1250mm (M.S)

PSM(8-16)

COFMOW/IR/M-PSM/2007

Rs.350.00

Rs.385.00

COFMOW/IR/PSM/20x2500/200 Rs.377.00 9

Rs.414.00

COFMOW/IR/RSM/1999

Rs.121.00

Rs.133.00

COFMOW/IR/PBM/2005

Rs.1597.00

COFMOW/IR/HPB/PBM/2010

Rs.242.00

CNC PROFILE BENDING HYDRAULIC PLATE BENDING MACHINE

Plate thickness 05-20mm PSM(10-20) 205 PLATE STRAIGHTENING & width 2500mm , MS-IS MACHINE 2062 RSM 206 RAIL STRAIGHTENING MACHINE PLATE BENDING MACHINES CNB 207 CNC PROFILE BENDING 208 HYDRAULIC PLATE 600mm x 1250mm Top BENDING MACHINE roll pressure- 600 T

HYDRAULIC PRESSES 209 HYD. PRESS 4 COLUMN (W/O TOOLING) 210 HYD. PRESS 4 COLUMN (W/O TOOLING) 211 HYD. PRESS 4 COLUMN (W/O TOOLING) 212 ECCENTRIC PRESS (W/O TOOLING) 213 HYD. PRESS 4 COLUMN (W/O TOOLING) 214 HYD. PRESS ‘C’ FRAME (W/O TOOLING) 215 HYD. PRESS ‘C’ FRAME (W/O TOOLING) 216 HYD. HORIZONTAL PRESS( C-FRAME)

DY.CME-II

217 HYD. PRESS ‘C’ FRAME (W/O TOOLING) 218 HYD. PRESS 4 COLUMN TRIMMING PRESSES

HYDPBM

CAP 200T

HP200(4COL) COFMOW/IR/M/ HP/200/1987

Rs.61.00

Rs.67.00

CAP. 300T

HP300(4COL) COFMOW/IR/HP- 4C/300/2005

Rs.73.00

Rs.80.00

CAP 500T

HP500(4COL) COFMOW/IR/HP- 4C/500/2010

Rs.197.00

Rs.217.00

CAP 200T

EP

Rs.135.00

Rs.149.00

CAP 100T

HP100(4-COL) COFMOW/IR/M/ HP/2009

Rs.31.00

Rs.35.00

CAP 100T

HP100 ( C)

COFMOW/IR/M/ HP/2009

Rs.31.00

Rs.35.00

CAP 200T

HP200 ( C)

COFMOW/IR/M/ HP/2009

Rs.61.00

Rs.67.00

CAP 200T

HPSEMIAUTO COFMOW/IR/M/ HP/2009 200

Rs.48.00

Rs.53.00

CAP 50T

HP50 (C )

COFMOW/IR/ HP2009

Rs.16.00

Rs.17.00

CAP 1000T

HP1000 (4COL)

COFMOW/IR/HP- 4C/1000/2007 Rs. 1199.00 Rs.1319.00

COFMOW/IR/CEP-200/1998

DY.CME-II

219 TRIMMING PRESS CAP 63T (MECHANICAL) 220 TRIMMING PRESS CAP 30T (MECHANICAL) 221 TRIMMING PRESS CAP 200T (MECHANICAL) WHEEL LATHES 222 RECONDITIONING OF UNDER FLOOR WHEEL LATHE (BG)

TP63

COFMOW/IR/TP/63/2000

Rs.36.00

Rs.40.00

TP

COFMOW/IR/PPM/30T/1999

Rs.24.00

Rs.27.00

TP200

COFMOW/IR/MTP/HF/200T/200 Rs.61.00 7

Rs.67.00

RCWLUF (BG) COFMOW/IR/MUFWL(BG)/REC /2006

Rs.246.00

Rs.270.00

223 RECONDITIONING OF UNDER FLOOR WHEEL LATHE (MG) 224 RECONDITIONING OF SURFACE WHEEL LATHE (BG CUM MG) WITH PROBE TYPE 225 CNC SURFACE WHEEL LATHE (BG) MEASUREMENT

RCWLUF (MG) COFMOW/IR/M-UFWL(MG)/ 2005

Rs.224.00

Rs.246.00

RSWL

COFMOW/IR/M/SWL(BG)/REC/ Rs.292.00 2006

Rs.321.00

WLS

COFMOW/SWL/CNC/BG/2009

Rs.761.00

Rs.837.00

WITH LASER BASED 226 CNC SURFACE WHEEL LATHE (BG) MEASUREMENT & BRAKE DISC MACHINING 227 CNC UNDER FLOOR WHEEL LATHE (BG) 228 CNC UNDER FLOOR WHEEL LATHE (BG CUM MG)

WLS

COFMOW/SWL/CNC/BG/2009

Rs.847.00

Rs.932.00

WLU(BG)

COFMOW/IR/M-UFWLCNC(BG)/2010

Rs.602.00

Rs.662.00

WLU(BG&MG) COFMOW/I/M-UFWL/(BG&MG)/ Rs.670.00 2004

Rs.737.00

WP500

COFMOW/IR/M-HWP/2009

Rs.440.00

Rs.484.00

WP200

COFMOW/IR/M-HWP/NG/2006 Rs.242.00

Rs.266.00

AHMCBS

COFMOW/IR/HDBS/2002

Rs.143.00

BS

COFMOW/IR/HDVMCBS/1100X Rs.27.50 1200/2007

Rs.30.25

400MM DIA, 233 CNC FULLY AUTOMATIC HORZ. 400X400MM SQ BAND SAW FOR RWF FOR CUTTING AXLE BLOOMS

HDMCBS

COFMOW/IR/CNC/HDMCBSM/4 Rs.184.00 00X400MM/2010

Rs.202.00

234 PLC HORZ. HIGH SPEED METAL CUTTING BAND SAW FOR CBC COUPLING

HMCBS

COFMOW/IR/HDHMCBSM/340 Rs33.00 X340/2010

Rs35.00

DY.CME-II WHEEL PRESS

DYCMEIII

CAP 500T 229 HYD. WHEEL PRESS (BG CUM MG) CAP 200T 230 HYD. WHEEL PRESS (NG) BAND SAW 231 FULLY AUTOMATIC 300MM DIA HORZ. BAND SAW FOR RWF, FOR CUTTING AXLE BLOOMS 232 VERTICAL HIGH SPEED METAL CUTTING BAND SAW

BORING MACHINES

300MM DIA

340 MM DIA & 340X340 MM SQ.

Rs.130.00

235 CNC HORZ. BORING AND MILLINGMACHINE (Tooled Up)

SPINDLE DIA 110MM

CNCHBM110

COFMOW/IR/CNCHBM110/2007

Rs.200.00

Rs.220.00

SPINDLE DIA 130MM 236 HORZ. BORING AND MILLING MACHINE (TOOLED UP)

HBM130

COFMOW/IR/HBM-130/2007

Rs.305.00

Rs.335.00

237 HORZ. BORING MACHINE ( Tooled Up)

HBM110

COFMOW/IR/HBM-110/2008

Rs.150.00

Rs.165.00

Max. turning/swing 238 CNC SPECIAL PURPOSE BORING diameter =1600mm MACHINE WITH MATERIAL HANDLING

CNCSPBM

COFMOW/IR/CNC-SPBM/2007 Rs.750.00

Rs.825.00

239 RADIAL DRILLING MACHINE

RDM50

COFMOW/IR/RDRs.20.00 50X1500,50X1790&50/2350/200 8

Rs.22.00

240 RADIAL DRILLING MACHINE

ARM LENGTH 1500/1790/ 2350 MM ,DRILLING CAP mm50 MM Arm length 2500 mm & drilling cap. 80 MM

RDM80

COFMOW/I/RD80/2500&100/36 Rs.98.00 00/2008

Rs.107.00

241 RADIAL DRILLING MACHINE

Arm length 3600 mm & drilling cap. 100 MM

RDM100

COFMOW/I/RD80/2500&100/36 Rs.135.00 00/2008

Rs.150.00

242 RADIAL DRILLING MACHINE (TRAVELLING TYPE) WITH TRUNION FOR HOLDING ENGINE BLOCKS

80mmx2800(travelling type) Traverse of machine on bed is 6

RDTT80

COFMOW/IR/TTRD80/2800/2007

Rs455.00

Rs.500.00

CNCGHM

COFMOW/IR/GHM-800/2001

Rs.655.00

Rs.720.00

CNCGSM

COFMOW/IR/CNCGS/2007

Rs.269.00

Rs.300.00

SPINDLE DIA 110MM

GEAR MANUFACTURING MACHINES 800mm,5 axis CNC 243 GEAR HOBBING MACHINE (MAX. DIA) 400mm X MODUL E5 244 CNC GEAR SHAPER (MAX. DIA) 245 GEAR GRINDING MACHINE

800 mm , 5 Axis CNC

GRDG

COFMOW/IR/GGM800/Rev./2007

Rs.1000.00

Rs.1095.00

245A GEAR GRINDING

400 mm , 5Axis CNC

GRDG

COFMOW/IR/GGM400/Rev./2008

Rs.850.00

Rs.930.00

246 CENTERLESS GRINDER

Work dia range 8-100 mm Max. workpiece LENGTH 2000 MM GRINDING THROUGH FEED

CG

COFMOW/IR/CNCGGM/2008

Rs.720.00

Rs.800.00

247 UNIVERSAL TOOL & CUTTER GRINDER

Working dia-300mm Spindle power 11kw

CNCGTOOL

COFMOW/I/CNC/T&CG/400/200 Rs.210.00 9

Rs.232.00

Internal grinder depths ID CNCIG 248 UNIVERSAL PRECISION 300mm INTERNAL GRINDER MACHINE

COFMOW/IR/UPIG/2002

Rs.280.00

Rs.310.00

GRINDING DEPTH 250 249 CNC INTERNAL GRINDER MACHINE MM WITH TURRET

COFMOW/IR/CNCIGM/250/200 Rs.700.00 9

Rs.770.00

MACHINE GRINDING MACHINES

CNCIGM

GRINDING DEPTH 300 249A CNCINTERNAL GRINDER MACHINE MM

DYCMEIII

DY-II

DY-III

COFMOW/IR/CNCIGM/250/200 Rs.620.00 8

Rs.700.00

250 UNIVERSAL GRINDING MACHINE, OPERATED HYDRAULICALLY

Grinding length 1000mm CNC UPCG height of center- 170mm

COFMOW/IR/CNC/UPCG/2008 Rs.330.00

Rs365.00

251 CYLINDRICAL GRINDER HYD. OPERATED

200mm dia x 2000 length CyG 2000mm

COFMOW/IR/CG/2225x2000/20 Rs.90.00 08

Rs.100.00

Rs.1070.00

Dia 160mm length 252 CNC CAM SHAFT GRINDER MACHINE 1700mm

CNCCGM

COFMOW/IR/CSGM1700X160/2007

253 HORIZONTAL SURFACE GRINDER

450x1500mm

HSG

COFMOW/IR/SG/250X1500/200 Rs.137.00 7

Rs.150.00

254 CNC LINE GRINDING MACHINE

FOR CARBON BRUSH GRINDING

LGM

COFMOW/IR/LGM/CB/2008

Rs.710.00

255 CNC CREEP

FOR CON ROD AND CAP GRINDING

CNCCFG

COFMOW/IR/DLW/LGM/CB/ Rs.700.00 2008

Rs. 760.00

COFMOW/IR/VHM/250X1200/20 Rs.450.00 09

Rs.520.00

COFMOW/IR/VHM/250x850/199 Rs.290.00 9

Rs.340.00

COFMOW/IR/VHM/200x500/200 Rs.198.00 9

Rs.218.00

CNCTMC

COFMOW/IR/CNC/VTL/1000/20 Rs.600.00 04

Rs.665.00

CNCMC1000

COFMOW/IR/HMC800x1000/2000

Rs.850.00

Rs.935.00

CNCMC630

COFMOW/IR/HMC-600/2008

Rs.650.00

Rs.710.00

COFMOW/IR/HMC800x800/DLW/2002

Rs.710.00

Rs.780.00

FEED GRINDER DY-III

CNCIGM

HONING MACHINES HM1200 256 VERTICAL HONING Honing dia 250mm for MACHINE GM/ALCO cylinder liners for DMW Spindle Stroke 1200mm HM850 257 HONING MACHINE Honing dia 250mm for ALCO/MAK Cylinder liners for DMW spindle stroke 850mm HM500 258 HONING MACHINE Honing dia 200mm

VERTICAL BORING & MILLING MACHINES Table 800mm dia meter 259 CNC VTL TURNMILL CENTRE FOR LOCO COMPONENTS MACHINIG CENTRES (TOOLED UP) Type Horizontal pallet 260 HORIZONTAL MACHINING size 1000X1000 MM CENTRES (TOOLED UP) FOR 1-3 COMPONENTS

Type Horizontal pallet 261 HORIZONTAL MACHINING 630X630 MM CENTRES (TOOLED UP) FOR 1-3

262 HORIZONTAL

Type Horizontal pallet CNCMC800

MACHINING SIZE 800 X 800 MM CENTRES (TOOLED UP) FOR 1-3 COMPONENTS

Rs.990.00

Rs.650.00

DYCMEIII

Type Horizontal SIZE 263 HORIZONTAL 1600X1400 MM MACHINING CENTRES 5 -AXIS WITHOUT PALLET (TOOLED UP) FOR 18 COMPONENTS

CNCMC1600

COFMOW/IR/CNC HMC

Rs.1000.00

Rs. 1100.00

Type vertical Table size 264 VERTICAL MACHINING 600x1100 CENTRES (3-AXIS)

CNCVMM

COFMOW/IR/DLW/VMM600X1100/2005

Rs.230.00

Rs.255.00

Type vertical Table size 264A VERTICAL MACHINING 1400X650mm CENTRES (3AXIS)(TOOLED UP) FOR 2-3 COMPONENT

CNCVMC

COFMOW/IR/VMC/DCW/2001

Rs.300.00

Rs.330.00

CNCVMC1000 COFMOW/IR/VMC/2009

Rs.550.00

Rs.610.00

UMC

COFMOW/IR/HDUMC/2009

Rs.1150.00

Rs.1270.00

COMM

COFMOW/I/CMM/ RCF/2000

Rs.90.00

Rs.100.00

267 DIMENSION CHECKING MACHINE (PORTABLE CMM)

MBFDC

COFMOW/I/Portable CMM/2009 Rs.45.00

Rs.50.00

268 MICROGAUGING EQUIPMENT FOR MEASUREMENT OF CAM SHAFT

MICGAUG

COFMOW/IR/MGE-1700/2007

Rs.180.00

Rs.198.00

CNCM

COFMOW/IR/CNCM/2008

Rs.155.00

Rs.170.00

COFMOW/IR/3DCMM/2010

Rs.700.00

Rs.770.00

Type vertical Table size 265 VERTICAL MACHINING 1000X900mm CENTRES (5AXIS)(TOOLED UP) FOR 10 COMPONENT 265A HEAVY DUTY UNIVERSAL MACHINING CENTRES WITH MILLING HEAD ,APC,ATC &ROTARY TABLE (TOOLED UP) DYCME-IV

METROLOGICAL INSTRUMENT 266 COORDINATE MEASURING MACHINE (CMM)

268A CNC PROFILE CHECKING EQUIPMENT FOR MEASUREMENT OF CAM SHAFT 268B 3D GANTRY

TYPE COORDINATE MEASURING MACHINE(CMM) DYCME-III

Type vertical Table size 1000X900mm

MILLING MACHINES

Table size 1800x4000

FOR MEASUREMENT COMM ON CRANK CASES

CNCBTMM Work table269 CNC BED TYPE MILLING MACHINE 1000x4500mm long travelWITH WORK TABLE 4000mm UNIVERSAL HEAD & W/O ATC(CNC EDGE MILLING MACHINE BED TYPE)(RECIPROCA TING TABLE FIXED BED TYPE)

COFMOW/IR/MCNC/BTMM/2007

Rs.1100.00

Rs.1210.00

CNCBTMM

COFMOW/IR/MCNC/BTMM/2009

Rs.810.00

Rs.900.00

270 CNC CAMSHAFT MILLING MACHINE

CNCCAMM

COFMOW/IR/CNC/CSMM2000X400/2008

Rs.760.00

Rs.836.00

271 LASER LINE BORING MEASUREMENT AND ALIGNMENT SYSTEM

BM&A

COFMOW/IR/LLBMAS/GOC/20 Rs.32.00 05

Rs.38.00

DY-III

272 CNC FOLDING MACHINE

CNCFM

COFMOW/IR/CNCFM/3200X5/2 Rs.250.00 010

Rs.275.00

DY-III

FOR MACHINING OF 273 1500 MM CNC HORIZONTAL TRACTION MOTOR BORING &MILLING MAGNET FRAME MACHINE

CNCHB150

COFMOW/IR/HBMM200X1200/DMW/2004

Rs.1500.00

Rs.1700.00

274 MULTISTATION CNC 160MM SPINDLE DIA FLOOR TYPE TRAVELLING COLUMN CNC HORIZONTAL BORING & MILLING MACHINE WITH FIXTURES AND BORING BARS (TOOLED UP)

FOR MACHINING OF ENGINE BLOCK FOR REHABLITAION PURPOSES

CNCHBTC16

COFMOW/IR/HBM/DCW/2007

Rs.4900.00

Rs.5400.00

275 SINGLE AXIS CNC GUN DRILLING MACHINE

FOR CAMSHAFTS UPTO 1 METER

DMG1AXIS

COFMOW/IR/GDM/DLW400X1800/ 2004

Rs.132.00

Rs.145.00

1200X5000mm length 276 CNC KNOB /BED TYPE MILLING MACHINE (TRAVELLING TYPE COLUMN)

CNC BTMM

COFMOW/IR/CNC/KMM5000X1200/2008

Rs.1540.00

Rs.1694.00

277 THREE AXIS CNC GUN DRILLING MACHINE

DMG 3AXIS

COFMOW/IR/CDM/600X800/20 Rs.260.00 07

Work table269A CNC BED TYPE MILLING MACHINE 1000x4500mm WITHOUT WORK TABLE &NC ROTARY TABLE &W/O ATC

DYCMEIII

(FOR CAMSHAFTS UPTO 800MM LENGTH & DRILLING OPERATION OF CON ROD AND CAP)

Rs.295.00

278 GANTRY TYPE CNC MILLING MACHINE WITH ATC AND AUTOMATIC HEAD CHANGER FOR BOGIE FRAME MACHINING

GTCNC MC

COFMOW/IR/CNC MC&ATC/2005

Rs.2662.00

Rs.2928.20

279 AUTO DRILLING MACHINE

Twin spindle for carbon brushes



COFMOW/IR/Auto Drilling Machine/ Carbon Brush/ 2007

RS.85.00

RS.95.00

280 TWO SPINDLE FINE BORING MACHINE (SPM) 281 SPECIAL PURPOSE CNC END MILLING,CENTERIN G & CUP TURNING M/c

2 Spindle M/c for Cam Rod

TSPBM

COFMOW/IR/TSPBM(SPM)

Rs.800.00

Rs.900.00

FIRST OPERATION FOR CNCEMCCTM COFMOW/IR/CNCAXLE LINE MACHINE EMCCTM/2007/2010 LINE

Rs.1565.00

Rs.1691.00

282 UNIVERSAL RAM TURRET MILLING MACHINE UNIVERSAL MILLING MACHINE/CNC 5 AXIS MACHINING CENTRE FOR TOOL ROOM

X-axis (longitudinal URTMM traverse) 630mmY-axis (vertical traverse 560 mm, Z axis (spindle head traverse) 560mm Spindle motor power-10kw

COFMOW/IR/Milling Machine/ Universal/CNC/ 2005

Rs.450.00

Rs.510.00

283 CNC TRAVELLING TYPE DRILLING MACHINE

For engine block drilling & CNCTTDM Tapping

COFMOW/IR/TTRDM/DMW/200 Rs1200.00 7

Rs.1320.00

7000X3000X1000

CNC MILLIP

COFMOW/IR/CNC/PCMIL/2007 Rs.2000.00

Rs.2200.00

Length-2500mm Width1600mm

MILLP

COFMOW/IR/PL/CLW/2003

Rs.815.00

Rs.900.00

Cap. (T)- 200T

CNB 200

Rs.230.00

Rs.260.00

Cap. (T)- 400T

CNB 400

Rs.320.00

Rs.360.00

Cap. (T)- 800T

CNB 800

Rs.725.00

Rs.797.50

Cap. (T)- 200T

PB 200

Rs.150.00

Rs.165.00

Cap. (T)- 400T

PB 400

COFMOW/IR/CNC HPB/200/2007 COFMOW/IR/CNC HPB/400/2002 COFMOW/IR/CNC HPB/800/2001 COFMOW/IR/HPB/80/200/250/2 005 COFMOW/IR/HPB/400/2007

Rs.210.00

Rs.231.00

Cap. (T)- 80T

PB 80

Cap. (T)- 650T

CNB 650

COFMOW/IR/HPB/80/200/250/2 Rs.55.00 005 COFMOW/IR/HPB/640/2007 Rs.515.00

CNCGS DC16X40

COFMOW/IR/CNCRs.490.00 DCGM/20X4000& 16X4000/2007

PLANO-MILLING

DYCME II

DY-II

284 CNC DOUBLE COLUMN PLANO MILLING MACHINE 285 DOUBLE COLUMN PLANO MILLING MACHINE PRESS BRAKES 286 PRESS BRAKES HYDRAULIC CNC 287 PRESS BRAKES HYDRAULIC CNC 288 PRESS BRAKES HYDRAULIC CNC 289 PRESS BRAKES HYDRAULIC 290 PRESS BRAKES HYDRAULIC 291 PRESS BRAKES HYDRAULIC 292 PRESS BRAKES HYDRAULIC

SHEARING MACHINES 16X4000 MM 293 GUILLOTINE SHEARING CNC DOUBLE COLUMN HYDAULICALLY OPERATED, WITH MATERIAL HANDLING SYSTEM

Rs.60.50 Rs.565.00

Rs.535.00

DYCME II

DYCME III

DYCME III

20X4000 MM 294 GUILLOTINE SHEARING CNC DOUBLE COLUMN HYDAULICALLY OPERATED, WITH MATERIAL HANDLING SYSTEM

CNCGS DC20X40

COFMOW/IR/CNCRs.550.00 DCGM/20X4000& 16X4000/2007

Rs.600.00

295 HYDAULIC POWERED /COMBINED SHEARING, PUNCHING, CROPPING & NOTCHING

16MM (100T)

CSPCM

COFMOW/IR/DCGSM/6x3100. 10x2400, 10x3100, 13x3100, 16x4000, 20x3100 & 20x4000/2007

Rs.75.00

Rs.82.50

296 GUILLOTINE SHEARING MACHINEDOUBLE COLUMN

10x2400 MM

GSDC 1024

COFMOW/IR/DCGSM/6x3100. 10x2400, 10x3100, 13x3100, 16x4000, 20x3100 & 20x4000/2007

Rs.45.00

Rs.49.50

10x3100 MM 297 GUILLOTINE SHEARING MACHINE DOUBLE COLUMN

GSDC 1031

COFMOW/IR/DCGSM/6x3100. 10x2400, 10x3100, 13x3100, 16x4000, 20x3100 & 20x4000/2007

Rs.50.00

Rs.55.00

13x3100 MM 298 GUILLOTINE SHEARING MACHINE DOUBLE COLUMN

GSDC 1331

COFMOW/IR/DCGSM/6x3100. 10x2400, 10x3100, 13x3100, 16x4000, 20x3100 & 20x4000/2007

Rs.70.00

Rs.77.00

299 GUILLOTINE SHEARING MACHINEDOUBLE COLUMN

16x3100 MM

GSDC 1631

COFMOW/IR/DCGSM/16x3100. Rs.80.00 10x2400, 10x3100, 13x3100, 16x4000, 20x3100 & 20x4000/2007

Rs.88.00

16x4000 MM 300 GUILLOTINE SHEARING MACHINE DOUBLE COLUMN

GSDC 1640

COFMOW/IR/DCGSM/16x3100. Rs.95.00 10x2400, 10x3100, 13x3100, 16x4000, 20x3100 & 20x4000/2007

Rs.104.50

6x3100MM 301 GUILLOTINE SHEARING MACHINE DOUBLE COLUMN

GSDC 631

COFMOW/IR/DCGSM/6x3100. 10x2400, 10x3100, 13x3100, 16x4000, 20x3100 & 20x4000/2007

Rs.42.00

Rs.46.20

6x2400 MM 302 GUILLOTINE SHEARING MACHINE DOUBLE COLUMN

GSDC 624

COFMOW/IR/DCGSM/6x3100. 10x2400, 10x3100, 13x3100, 16x4000, 20x3100 & 20x4000/2007

Rs.36.00

Rs.39.60

303 CUT TO LENGTH LINE

4000mm X1250mm X5mm Thickness

CTLL

COFMOW/IR/CTLL/2001

Rs.1650.00

Rs.1820.00

304 CUT TO LENGTH LINE

7500mm X1600mm X5mm Thickness

CTL

COFMOW/IR/ CTLL/2008

Rs.2800.00

RS.3100.00

COFMOW/IR/CNC/TC250x400/2005

Rs.70.00

Rs.77.00

Rs.190.00

Rs.209.00

TURNING CENTRES Turning diameter- 250mm CNCTC 2540 305 CNC TURNING CENTRES/ CNC Turning length- 400mm CHUCKERS (TOOLED UP) WITH 2-3 COMPONENTS

Turning diameter- 500 CNCTC 451000 COFMOW/IR/CNC306 CNC TURNING CENTRES/ CNC mm Turning length- 2000 TC/2000/2006 CHUCKERS mm (TOOLED UP) FOR 2-3 COMPONENTS

450x1000 mm 307 CNC TURNING CENTER/CNC CHUCKER (TOOLED UP) 2-3 COPONENT With YAxis

CNCTC 451000 COFMOW/IR/CNC/TC/1000/200 Rs.275.00 7

Turning diameter- 500mm CNCTC 502000 COFMOW/IR/CNC/HDTC308 CNC TURNING CENTRES/ CNC Turning length- 2000mm 500x2000/ 2007 CHUCKERS (TOOLED UP) FOR 2-3 COMPONENTS CNC TWIN Turning diameter- 200mm CNC TSCK SPINDLE CHUCKER Turning length- 175mm (WITHOUT GANTRY AND BAR FEEDER )

DYCME-III

308A

DYCMEIV

AIR COMPRESSOR 309 ROTARY SCREW DIESEL DRIVEN 310 ROTARY SCREW DIESEL DRIVEN

*180CFM 7KG/CM2

311 ROTARY SCREW DIESEL DRIVEN 312 ROTARY SCREW DIESEL DRIVEN

Rs.225.00

Rs.247.50

COFMOW/IR/CNC/TSC/200/200 Rs.290.00 7

Rs.319.00

COFMOW/IR/DAC/SC/180/7/20 Rs.13.85 08 ACDD 300/8.5 COFMOW/IR/DAC/SC/300/8.5/2 Rs.15.40 008

Rs.14.95

*300CFM 7KG/CM2

ACDD 300/7

Rs.15.70

*450CFM 10KG/CM2

ACDD 450/10

COFMOW/IR/DAC/SC/300/7/20 Rs.14.30 08 COFMOW/IR/DAC/SC/450/10/2 Rs.20.00 008

313 ROTARY SCREW DIESEL DRIVEN

*600CFM 7KG/CM2

ACDD 600/7

COFMOW/IR/DAC/SC/600/7/20 Rs.22.10 08

Rs.24.30

314 ROTARY SCREW ELECTRICAL DRIVEN 315 ROTARY SCREW ELECTRICAL DRIVEN

120 CFM 10KG/CM2

ACED120/10

COFMOW/IR/EAC/SC/120/10/2 Rs.10.00 009

Rs.11.00

300CFM 10KG/CM2

ACED 300/10

COFMOW/IR/EAC/SC/300/10/2 Rs.21.00 009

Rs.23.10

316 ROTARY SCREW ELECTRICAL DRIVEN

300CFM 7.5KG/CM2

ACED 300/7.5

COFMOW/IR/EAC/SC/300/7.5/2 Rs.13.20 009

Rs.14.52

317 ROTARY SCREW ELECTRICAL DRIVEN

500CFM 10KG/CM2

ACED 500/10

COFMOW/IR/EAC/SC/500/10/2 Rs.25.30 009

Rs.27.83

318 ROTARY SCREW ELECTRICAL DRIVEN

500CFM 7.5KG/CM2

ACED 500/7.5

COFMOW/IR/EAC/SC/500/7.5/2 Rs.17.60 009

Rs.19.36

319 ROTARY SCREW ELECTRICAL DRIVEN

1000CFM 7.5KG/CM2

ACED 1000/7.5 COFMOW/IR/EAC/SC/1000/7.5/ Rs.28.60 2009

Rs.31.46

320 ROTARY SCREW ELECTRICAL DRIVEN

1000CFM 10KG/CM2

ACED 1000/10 COFMOW/IR/EAC/SC/1000/10/ Rs.37.80 2009

Rs.41.50

321 ELECTRIC

1000CFM/7.5/kg/cm2

ACEDOF

Rs.77.00

DRIVEN OIL FREE AIR COMP •

Rs.305.00

*300CFM 8.5KG/CM2

ACDD 180/7

COFMOW/IR/EAC/SC/OF/10 Rs.70.00 00/7.5/2010

Rs.16.94

Rs.22.00

Note – Electric Driven Air Compressor 120 CFM/10 CM2 and oil free Air compressor electric driven 100CFM/7.5 kg/cm2 as New Items. HAMMERS Type-Blow energy Open FHOD 1500 COFMOW/IR/FH- 1500/2008 Rs.68.00 Rs.75.00 322 FORGING HAMMERS dia- 1500Mkg Type-Blow energy Open FHOD 2250 COFMOW/IR/FH- 2250/2008 Rs.106.00 Rs.116.60 323 FORGING HAMMERS dia- 2250Mkg

324 FORGING HAMMERS 325 FORGING HAMMERS 326 FORGING HAMMERS 327 TUP HAMMER 328 DOUBLE ACTING

Type-Blow energy Open dia- 450Mkg Type-Blow energy Open dia- 4500Mkg Type-Blow energy Open dia- 650Mkg Blow energy 7300Kg.

TERRY HAMMER TERRY HAMMER 1245 MKG

FHOD 450

COFMOW/IR/FH- 450/2001

Rs.31.00

Rs.34.10

FHOD 4500

COFMOW/IR/FH- 4500

Rs.125.00

Rs.137.50

FHOD 650

COFMOW/IR/FH- 650/2008

Rs.44.00

Rs.48.40

FHTUP

COFMOW/IR/TH/ 1996

DATH1245

COFMOW/IR/M/TH-1245 MKG/2008

Rs.238.00 Rs.75.80

Rs.261.80 Rs.83.30

Rs.37.10

R40.80

Note- Double acting Terry Hammer 1245 MKG as New Items DYCMEIV

MILLING MACHINES 329 DOUBLE SPINDLE HORIZONTAL KEY WAY MILLING

Length of key way – 10- DSKM 200mm Width of key way5-20mm

COFMOW/IR/SPM (DSKM)/200/x20x75/2004

Table size 1600X355 330 HORIZONTAL MILLING MACHINE mm(LXW)

HMM

COFMOW/IR/MILLING/M/c/NON- Rs.18.70 CNC/2008

Rs.20.50

Table size 1600X350 331 HORIZONTAL MILLING MACHINE mm(LXW) WITH VERTICAL ATTACHMENT

HMM

COFMOW/IR/Horizontal/HVMM/ Rs.20.00 1600x350mm/2009

Rs.22.00

Table size 1350X310 332 HORIZONTAL MILLING MACHINE mm(LXW)

HMM

COFMOW/IR/MILLING/M/c/NON- Rs.13.20 CNC/2009

Rs.14.50

Table size 1600X300 333 UNIVERSAL MILLING MACHINE mm(LXW)

UMM

COFMOW/IR/MILLING/M/c/NON- Rs.30.96 CNC/2009

Rs.34.00

334 VERTICAL MILLING Table size 1350X310 MACHINE mm(LXW)

VMM

COFMOW/IR/MILLING/M/c/NON- Rs.15.00 CNC/2009

Rs.16.50

300GM 335 AUTOMATIC INJECTION MOULDING MACHINE 500GM 336 AUTOMATIC INJECTION MOULDING MACHINE 337 COIL SPREADING MACHINE 3 DIA TRATION MOTOR 338 COMPUTERISED WATER LOAD BOX WITH COOLING TOWER, WATER BOX PLATE LIFTING MACHANISM

AIMM300

COFMOW/IR/FAIMM/300GM/20 Rs.27.50 05

Rs.30.00

AIMM500

COFMOW/IR/FAIMM/500GM/20 Rs.33.00 05

Rs.36.30

CSM

COFMOW/IR/CSM/2001

Rs.37.40

Rs.41.10

CWLB

COFMOW/IR/M/M/CLB/2005

Rs.65.00

Rs.72.00

339 COMPUTERISED WATER LOAD BOX WITH COOLING TOWER, WATER BOX PLATE LIFTING MACHANISM WITH COMPLETE CONSTRUCTION LIKE TEST CABIN ETC.

CWLBCC

COFMOW/IR/M/CLB/2007

Rs.102.30

Rs.112.50

340 HOT PHOSPHATING PLANT 341 HOT PHOSPHATING PLANT

HPP(PU)

COFMOW/IR/M/Phos/2001

Rs.211.20

Rs.232.20

HPP(WS)

COFMOW/IR/M/RW/Phos/2009 Rs.148.00

Rs.162.80

342 PORTABLE X-RAY MACHINE

PXRM

COFMOW/IR/ XRAY/PORTABLE/ 2009

Rs.37.00

Rs.40.70

343 DIGITAL FUEL INJECTION PUMP TEST BENCH FOR LOCOMOTIVE 344 *X-RAY MACHINE FOR BAGGAGE SCANNER

TSFIPC

COFMOW/IR/M/ DFIPTB/2008

Rs.28.00

Rs.30.80

XRMFBS

COFMOW/IR/XRAY/BS/2010

Rs. 38.00

Rs. 42.00

Note- X-Ray machine for baggage scanner as New Items DYCMEIV

345 COMPUTERISED GE GOVERNOR TEST STAND

TEGEGOV

COFMOW/IR/CGE/GTS/2005

Rs.27.50

Rs.30.25

346 COMPUTERISED WOODWARD GOVERNOR TEST STAND WITH LAN FACILITY

TSWW GOVN

COFMOW/IR/CWWG/GTS/2009 Rs.24.00

Rs.26.40

347 TRANSVERSE TESTING MACHNE

TTM

COFMOW/IR/TTM/200/2006

Rs.18.15

Rs.20.00

CTPM

COFMOW/IR/CTPM/2006

Rs.72.60

Rs.80.00

349 COMPUTERISED TICKET & STATIONARY PRINTING MACHINE

CTSPM

COFMOW/IR/CT & SPM/2006

Rs.92.40

Rs.101.60

350 SHEET FED OFFSET PRINTING MACHINE 351 WEB OFF SET PRINTING MACHINE WITH NUMBRING UNITS

SFOPM

COFMOW/IR/FOSPM/2010

Rs.37.40

Rs.42.00

WOPM

COFMOW/IR/WOSPM/2006

Rs.92.40

Rs.101.60

OESLAB SPETC

COFMOW/IR/Spectrometer/Met Rs.44.00 al/Lab/2010

Rs.48.40

353 OES PORTABLE SPECTROMETER FOR METAL

OESPORT SPETC

COFMOW/IR/Spectrometer/Met Rs.38.50 al/Portable/2003

Rs.42.30

354 PARTICLE COUNTER FOR MACHINE WEAR CONDITION MONITORING

PC

COFMOW/IR/PC-DRF/2010

Rs29.22

Rs.32.12

355 ATOMIC ABSORPTION SPECTROMETER

SPEMAB

COFMOW/IR/AA/Spectrometer/ Rs.39.90 Oil/2005

Rs.43.80

356 ROTRODE SPECTROMETER FOR OIL

SPECTRT

COFMOW/IR/Spectrometer/RDE Rs.80.00 /Oil/2008

Rs.88.00

357 *WD XRF

XRF

COFMOW/IR/M/ XRF/2010

Rs.250.00

PRINTING MACHINES 348 COMPUTERISED TICKET PRINTING MACHINE

SPECTROMETERS 352 OES LAB SPECTROMETER FOR METAL

FLUORESENCE SPECTROMETER & SAMPLE PREPARATORY ACCESSORIES

Rs.232.00

358 *OPTICAL

Rs.30.00

Rs.33.00

Rs.950.00

Rs.1000.00

CSS& LDTM15 COFMOW/IR/CSS ALDTM/15/2009

Rs.19.00

Rs.20.90

CSS& LDTM20 COFMOW/IR/CSS ALDTM/20/2009

Rs.21.00

Rs.23.10

OMM

COFMOW/IR/TIMM/2009

METALLURGICAL MICROSCOPE Note: XRF Spectrometer and Optical Metallurgical Microscope as New Items SPRING MANUFACTURING MACHINES 359 COIL SPRING END Spring Outer Dia Max GRINDING 500mm Min. 60mm MACHINE (IMPORTED) SPRING TESTING MACHINES 15T 360 COIL SPRING SCRAGGING & LOAD DEFLECTION TESTING MACHINE

20T 361 COIL SPRING SCRAGGING & LOAD DEFLECTION TESTING MACHINE

SEG(IMP)

COFMOW/IR/SEG500/1000/2008

CSS& COFMOW/IR/LHB&IRY/CSL Rs.240.00 LDTM20(LHB) DTM-20/2008

Rs.265.00

BLTM50

Rs.63.80

Rs.71.10

EMCDCS LHB COFMOW/IR/EMCDFCS/LHB/1 Rs.20.50 000/2009

Rs.22.50

365 MAGNAFLUX TESTING FOR DRAFT GEAR

EMCDDG

COFMOW/IR/MTM/DG/2009

Rs.17.86

Rs.19.56

366 ELECTROMAGNETI C CRACK DETECTOR FOR LOCO CRANK SHAFT

EMCDLCS

COFMOW/IR/EMCDLCS/2010

Rs.24.20

Rs.26.60

150T

HTTM150

COFMOW/IR/HTTM/150/2010

Rs.33.00

Rs.36.30

200T

HTTM200

COFMOW/IR/HTTM/200/2008

Rs.39.00

Rs.42.90

SATHYDLHB

COFMOW/IR/SAT/SH/1300/201 Rs.25.50 0

Rs.28.05

362 *COIL SPRING

20T

SCRAGGING & LOAD DEFLECTION TESTING MACHINE WITH AXIAL SHIFT FOR LHB & IRY COACHES TESTING EQUIPMENTS 50T 363 BOGIE TESTING MACHINE BOGIE LOAD TESTING MACHINE 364 MAGNAFLUX TESTING MACHINE FOR SPRING FOR LHB COACHES

367 HYDRAULIC HORIZONTAL TENSILE TESTING MACHINE 368 HYDRAULIC HORIZONTAL TENSILE TESTING MACHINE

369 SHOCK ABSORBER TESTING M/C FOR LHB COACHES

COFMOW/IR/BLT/50/2009

SATMM

COFMOW/IR/M/CCM/SAT/2010 Rs.150.00

Rs.165.00

100T 371 UNIVERSAL TESTING MACHINE

UTM100

COFMOW/IR/ CCUTM/100T/ 2010

Rs.20.00

Rs.22.00

20T 372 UNIVERSAL TESTING MACHINE

UTM20

COFMOW/IR/ CCUTM/20T/ 2010

Rs.17.45

Rs.19.15

370 *SHOCK

ABSORBER TESTING MACHINE FOR YAW DAMPERS

* Note – Coil Spring Scragging & Load Deflection Testing Machine with Axial Shift for LHB & IRY Coaches and Shock Absorber Testing Machine for Yaw Dampers as New Items.