Jsa For Welding Grinding 6k2c1
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Jsa For Welding Grinding as PDF for free.
More details w3441
- Words: 993
- Pages: 7
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
Controls/ Precautions
Potential Hazards
1. Applic ation of Permit to Work.
1. Work carried out without PTW.
2. Condu ct TBT
1. Unawareness by team .
1. Apply work permits from Client prior to
work at site.
1. Tool box talk to be conducted prior to start
of work and to coordinate the work to have a clear understanding of hazards.
3. Inspec
tion of Tools & Equip ment. 4. Perso nal Protec tive Equip ment. (P.P.E. )
1. Improper or damaged tools. 2. Bodily Injuries.
1. Proper visual inspection on tools and equipments. 2. Damaged tools or equipments will be removed from site.
1.
1. Bodily Injuries.
Page 1 of 7
Adequate and suitable P.P.E. – Safety helmet, safety glasses, ear plug/muff, dust mask / respirator, safety hand gloves and safety boot will be provided to all workers during the course of work.
Name of Responsible Person
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
Potential Hazards
g
1. Inspection shall be done for all slings, lifting tools Proper lift plan, check the radius, load. Crane Inspection shall be done by HSE dept., Crane Safe Operating Procedure shall be followed. 2. Only qualified Crane Operator & rigger perso
gi
Carry out lifting works.
5. Ri
1.Fall of load during off loading, failure of crane / slings
Controls/ Precautions
Name of Responsible Person
n g wi th cr a n e fo r pi p e of f
Page 2 of 7
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
Controls/ Precautions
Potential Hazards
lo a di n g/ Er ec tio n 2.Crushing hazard or hit by the load 3.Hit by mobile equipment
4. Hand and finger injury. 6 .G ri n
1. Improper Work Permit & Awareness. Page 3 of 7
1. Handle the lifted load by tag line only Walking below suspended load shall be Prohibited. Area under lift to be barricaded. 1. Signalman shall be provided to give Signal to the crane operator and trailer driver. 2. Use walkie-talkie for effective communication. 1. Pinch points the load shall be identified. 2. Use proper PPE,s for tool handling (Heavy Duty gloves)
1. Get approved Hot Work Permit with gas test certificate from FPF Control Room. Gas test is requirement for any job near Un- plant and ogm area to identify if there is any
Name of Responsible Person
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
Potential Hazards
Controls/ Precautions
di
gas leakage which is harmful or flammable.
n
2. Conduct a daily toolbox talk before start specific work.
g W
3. Make a gas test with gas monitor and follow permit procedure and checks if working near OGM or FPF. O2,CO,H2S,LEL
el di n g W or k 2. Poor supervision and un-skilled person.
3. Injury due to damaged tools
Page 4 of 7
1. Proper monitoring and supervision required for the specific job. 2. Carry out the work only by qualified competent personnel “Welder, Fabricator”. 1.Hand tools to be inspected regularly before start Of each day. 2. Homemade tools are not allowed at the site. 3. Use proper PPE,s for tool handling (Heavy Duty gloves)
Name of Responsible Person
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
Potential Hazards
4. Electrical Shock
5. Eye / Face injury 6.Fire & Explosion
Page 5 of 7
Controls/ Precautions
1. Periodical checking and maintenance of all power tools. 2. Power cable to be checked prior to grinding & welding operations for no damage. 1. Safety Goggles, Face Shield, to worn by all workers during welding cutting activity. 1. Grinding and welding area contains sparks by using barriers or fire blankets. 2. Install Fire Extinguishers D / CO2 at hot job area. 3. To monitor the hot work area by (Fire Watcher) during job & after completion of welding work to ensure no presence of any fire hazards. 4. Prohibit on smoking in Plant area. 5. Clear area from any flammable material; Remove any flammable material away from
Name of Responsible Person
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
7Emerg ency Prepar ation at Site. a)First Aid and Medic al Attenti on. 8Enviro nment al. a)Ergon omics.
Potential Hazards
Controls/ Precautions
welding, cutting and grinding operation. 1. Poor response in case of 1. All site team should be trained in emergency. emergency rescue procedure. 2. Always maintain or clear the access for emergency vehicle at site. 1. Failure to rescue the injured person.
1. One vehicle should be at site all the time for emergency use. 2. First aid box should be at site.
1. Contamination. 2. Pollution. 3. Heat stroke, Exhaustion and suffocation.
1. All usage of machineries/tools to be monitored to ensure no leakage of oil/fluids. 2. All activities which produce smoke/dust will be kept at minimal. Water will be used to minimize dust. 3. Shed to shield workers from direct sunlight will be provided.
1. Personnel injuries.
1. Follow the safe working procedure. 2. Implement correct manual handling
Page 6 of 7
Name of Responsible Person
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
09House keepin g. 10Demo bilizati on of Equip ment, Tool and Materi al.
Potential Hazards
1. Poor housekeeping.
1. Poor demobilization standard or procedure.
Page 7 of 7
Controls/ Precautions 1. Housekeeping to be maintained at all time during and after work. 2. Proper disposable of accumulated rubbish from work area.
1. Ensure proper and safe demobilization of machineries and material. 2. Ensure applied work permit and certificate should be closed by Client authority at the end of job.
Name of Responsible Person
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
Controls/ Precautions
Potential Hazards
1. Applic ation of Permit to Work.
1. Work carried out without PTW.
2. Condu ct TBT
1. Unawareness by team .
1. Apply work permits from Client prior to
work at site.
1. Tool box talk to be conducted prior to start
of work and to coordinate the work to have a clear understanding of hazards.
3. Inspec
tion of Tools & Equip ment. 4. Perso nal Protec tive Equip ment. (P.P.E. )
1. Improper or damaged tools. 2. Bodily Injuries.
1. Proper visual inspection on tools and equipments. 2. Damaged tools or equipments will be removed from site.
1.
1. Bodily Injuries.
Page 1 of 7
Adequate and suitable P.P.E. – Safety helmet, safety glasses, ear plug/muff, dust mask / respirator, safety hand gloves and safety boot will be provided to all workers during the course of work.
Name of Responsible Person
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
Potential Hazards
g
1. Inspection shall be done for all slings, lifting tools Proper lift plan, check the radius, load. Crane Inspection shall be done by HSE dept., Crane Safe Operating Procedure shall be followed. 2. Only qualified Crane Operator & rigger perso
gi
Carry out lifting works.
5. Ri
1.Fall of load during off loading, failure of crane / slings
Controls/ Precautions
Name of Responsible Person
n g wi th cr a n e fo r pi p e of f
Page 2 of 7
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
Controls/ Precautions
Potential Hazards
lo a di n g/ Er ec tio n 2.Crushing hazard or hit by the load 3.Hit by mobile equipment
4. Hand and finger injury. 6 .G ri n
1. Improper Work Permit & Awareness. Page 3 of 7
1. Handle the lifted load by tag line only Walking below suspended load shall be Prohibited. Area under lift to be barricaded. 1. Signalman shall be provided to give Signal to the crane operator and trailer driver. 2. Use walkie-talkie for effective communication. 1. Pinch points the load shall be identified. 2. Use proper PPE,s for tool handling (Heavy Duty gloves)
1. Get approved Hot Work Permit with gas test certificate from FPF Control Room. Gas test is requirement for any job near Un- plant and ogm area to identify if there is any
Name of Responsible Person
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
Potential Hazards
Controls/ Precautions
di
gas leakage which is harmful or flammable.
n
2. Conduct a daily toolbox talk before start specific work.
g W
3. Make a gas test with gas monitor and follow permit procedure and checks if working near OGM or FPF. O2,CO,H2S,LEL
el di n g W or k 2. Poor supervision and un-skilled person.
3. Injury due to damaged tools
Page 4 of 7
1. Proper monitoring and supervision required for the specific job. 2. Carry out the work only by qualified competent personnel “Welder, Fabricator”. 1.Hand tools to be inspected regularly before start Of each day. 2. Homemade tools are not allowed at the site. 3. Use proper PPE,s for tool handling (Heavy Duty gloves)
Name of Responsible Person
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
Potential Hazards
4. Electrical Shock
5. Eye / Face injury 6.Fire & Explosion
Page 5 of 7
Controls/ Precautions
1. Periodical checking and maintenance of all power tools. 2. Power cable to be checked prior to grinding & welding operations for no damage. 1. Safety Goggles, Face Shield, to worn by all workers during welding cutting activity. 1. Grinding and welding area contains sparks by using barriers or fire blankets. 2. Install Fire Extinguishers D / CO2 at hot job area. 3. To monitor the hot work area by (Fire Watcher) during job & after completion of welding work to ensure no presence of any fire hazards. 4. Prohibit on smoking in Plant area. 5. Clear area from any flammable material; Remove any flammable material away from
Name of Responsible Person
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
7Emerg ency Prepar ation at Site. a)First Aid and Medic al Attenti on. 8Enviro nment al. a)Ergon omics.
Potential Hazards
Controls/ Precautions
welding, cutting and grinding operation. 1. Poor response in case of 1. All site team should be trained in emergency. emergency rescue procedure. 2. Always maintain or clear the access for emergency vehicle at site. 1. Failure to rescue the injured person.
1. One vehicle should be at site all the time for emergency use. 2. First aid box should be at site.
1. Contamination. 2. Pollution. 3. Heat stroke, Exhaustion and suffocation.
1. All usage of machineries/tools to be monitored to ensure no leakage of oil/fluids. 2. All activities which produce smoke/dust will be kept at minimal. Water will be used to minimize dust. 3. Shed to shield workers from direct sunlight will be provided.
1. Personnel injuries.
1. Follow the safe working procedure. 2. Implement correct manual handling
Page 6 of 7
Name of Responsible Person
JOB SAFETY ANALYSIS LOCATION: --------------------Task Name: Duration:
FACILITY:---------------------
DATE: ----------
Welding, Grinding of Pipe line Task Steps
09House keepin g. 10Demo bilizati on of Equip ment, Tool and Materi al.
Potential Hazards
1. Poor housekeeping.
1. Poor demobilization standard or procedure.
Page 7 of 7
Controls/ Precautions 1. Housekeeping to be maintained at all time during and after work. 2. Proper disposable of accumulated rubbish from work area.
1. Ensure proper and safe demobilization of machineries and material. 2. Ensure applied work permit and certificate should be closed by Client authority at the end of job.
Name of Responsible Person
Related Documents 3m3m1z
Jsa For Welding Grinding 6k2c1
November 2019 314
Jsa Grinding Welding Gas Cutting 2y2g1l
November 2019 459
Jsa Welding 2y432
December 2019 205
Jsa Welding 2y432
May 2020 31
Arc Welding -jsa (1) 2i1p2d
December 2019 117
Jsa #05 - Electric Welding 1i4o10
December 2019 99More Documents from "Babar" 2g2g2w
November 2022 0
Birdland The Real Book Bb 2 f3o6w
August 2021 0
Dimd (roland Dimension D Chorus) Manual 5t4w4f
May 2022 0
Jsa For Welding Grinding 6k2c1
November 2019 314
Wasting-my-young-years - London Grammar.pdf 6y1568
March 2023 0