M100756 Fanuc Sram Cards 4r5r3r

Fanuc SRAM Cards Memex offers Fanuc compatible PCMCIA SRAM backup cards for Fanuc 16/18 Versions B & C, Fanuc Robots, Fanuc 15B and Fanuc i Series Controls. The SRAM cards offer high-performance nonvolatile memory storage solutions for code transfer and data backup storage applications. With the right driver, the SRAM cards appear as a "Removable Drive" when plugged into a computer simply "drag and drop" files once configured. These SRAM cards are based on advanced CMOS technology that draws very low power and has reliable data retention characteristics. Our SRAM cards contain a rechargeable lithium battery and recharge circuitry, thus eliminating the need for replacement batteries found in many SRAM cards. Typical data retention time, without recharging, is 1 year for a 2MB card. The minimum battery life is 10 years. All our SRAM cards are built in welded stainless steel housings to ensure card integrity and data retention.

Features Include: • Windows 98 to XP PCMCIA Static RAM Memory Cards that work in Fanuc MEM Card ports. • High performance SRAM memory card: 150ns access time • Capacities: 1, 2, 4, 6 & 8 Megabytes • Operating temperature: Commercial Range of 0° to +70°C • Low power CMOS technology provides very low power and reliable data retention characteristics • standby current < 100µA typical • operating current: 190mA maximum for x16 operation at 150ns • Rechargeable lithium battery with recharge circuitry • eliminates the need to replace the battery • standby current during recharge typically < 2mA • battery backup time: 1 year typical based on 2MB (lower densities = longer storage times) • Unlimited write cycles, no endurance issues

Applicability List: Memex Products: Fanuc 16 Versions B & 1. SKU-2490 - 1 Megabyte C Controls +

Fanuc SRAM Card

Fanuc 18 Versions B & C Controls +

2. SKU-2500 - 2 Megabyte

Fanuc 15 Version B Controls +

3. SKU-2510 - 4 Megabyte

Fanuc 16/18/20/21 i Series Controls +

4. SKU-2520 - 6 Megabyte

Fanuc Robots

5. SKU-2530 - 8 Megabyte

Backing Up A Fanuc Control Get the size one bigger than the memory you have. For example: CNC Memory FROM (8+2Meg) 2 Megs (5120M) 1.5 Megs (3840M) 1 Meg (2560M) 512k (1280M) 256k (640M) 128k (320M)

SRAM Card Needed 8 Meg Card (or 6) 4 Meg Card 2 Meg Card 2 Meg Card 1 Meg Card 1 Meg Card 1 Meg Card

So if you have 2 Megabytes (5120 Meters of tape) of Fanuc 16 memory, you would need a 4 Megabyte SRAM card to back it up. If you are installing Fanuc 16-MB FROM Board, you will need our 6 or 8 meg SRAM cards as you need to backup the System Firmware + 2 Meg of SRAM..

Fanuc Master Trick: If you have a Fanuc (e.g. a RoboDrill) that cannot erase its memory normally (Power On Holding RESET + DELETE or "O" + DELETE), you can use this blank 512k file named SRAM2_5D.FDB (from a Fanuc 16, 2 meg dump) and copy it over and over to the SRAM Card with the appropriate names to make the CNC notice the files in the directory. Once reloaded, the sequential blank files will have effectively cleared the memory.

Memex Automation Inc. 777 Walkers Line, Burlington, Ontario Canada L7N 2G1 Phone: 905-635-3040 Fax: 905-631-9640 Sales: Phone: 905-635-3043 Copyright © 2007, Memex Automation Inc. All rights reserved.

File: p:\iso9000\docs\777 memex\m100756 fanuc sram cards.doc