Importing Nozzle Loads From Autopipe Into Autopipe Nozzle 641x2k
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3b7i
Overview 3e4r5l
& View Importing Nozzle Loads From Autopipe Into Autopipe Nozzle as PDF for free.
More details w3441
- Words: 465
- Pages: 3
Importing Nozzle Loads from AutoPIPE into AutoPIPE Nozzle - Pipe Stress and Vessel ...
Page 1 of 3
Pipe Stress and Vessel Design This is where you can find and contribute to discussions, ideas, and other information about Bentley Pipe Stress Analysis products.
Importing Nozzle Loads from AutoPIPE into AutoPIPE Nozzle
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Import / Export Subarea: Original Author: Bentley Technical Group
Problem: How to import loads from AutoPIPE into AutoPIPE Nozzle?
Answer: Use the following procedure: Note: Before starting this procedure be sure that AutoPIPE (Advance or Nuclear) and AutoPIPE Nozzle are correctly installed and licensed. AutoPIPE Nozzle cannot be licensed with AutoPIPE Standard. 1. Open model in AutoPIPE, ex: C:\ Bentley\ AutoPIPE V8i SELECTseries \ Examples\ WALKTHRU.DAT 2. Tell AutoPIPE which anchors in the model are to be exported to AutoPIPE Nozzle: a. Grids: Open the Model Input grids (Edit> Grids), select the Anchor tab, in the very last column on the right place a check mark in the box for the
http://communities.bentley.com/products/pipe_stress_analysis/w/pipe_stress_analysis__... 15/Oct/2013
Importing Nozzle Loads from AutoPIPE into AutoPIPE Nozzle - Pipe Stress and Vessel ...
Page 2 of 3
b. Anchor dialog: Place a check mark in the box "Report anchor results to AutoPIPE Nozzle"
3. Anlyze the model 4. Select File> Export> Nozzle Loads to AutoPIPE Nozzle. Note: See AutoPIPE online help for details about the this command and file format. 5. Providing everthing was installed correctly and licensed, in a few moments, AutoPIPE Nozzle should have automatically started. Note: If AutoPIPE Nozzle does not automatically start then starte the program and then select File> Import AutoPIPE... 6. On the "Import AutoPIPE Nozzles" dialog screen, " Select Nozzle PXF file" should have automatically been the filled in with the model name exported from AutoPIPE, ex: Walkthru must press on the drop down arrows to choose BOTH a "Selct Nozzle ID" and a "Analysis Set Number", as pictured below, before pressing OK button.
http://communities.bentley.com/products/pipe_stress_analysis/w/pipe_stress_analysis__... 15/Oct/2013
Importing Nozzle Loads from AutoPIPE into AutoPIPE Nozzle - Pipe Stress and Vessel ...
Page 3 of 3
After making a valid selection fro the 2 items above, press the OK button. 7. Choose a from 1 of 5 vessel "Orientation", and press OK button to complet the process of importing nozzle loads from AutoPIPE V8i. Note: AutoPIPE Nozzle can only process one nozzle at a time. When completed with the current nozzle, save the file, and then select File> Import AutoPIPE... to select a different nozzle ID to be processed.
See Also Bentley AutoPIPE
External Links Bentley Technical KnowledgeBase Bentley LEARN Server
Comments or Corrections? Bentley's Technical Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
http://communities.bentley.com/products/pipe_stress_analysis/w/pipe_stress_analysis__... 15/Oct/2013
Page 1 of 3
Pipe Stress and Vessel Design This is where you can find and contribute to discussions, ideas, and other information about Bentley Pipe Stress Analysis products.
Importing Nozzle Loads from AutoPIPE into AutoPIPE Nozzle
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Import / Export Subarea: Original Author: Bentley Technical Group
Problem: How to import loads from AutoPIPE into AutoPIPE Nozzle?
Answer: Use the following procedure: Note: Before starting this procedure be sure that AutoPIPE (Advance or Nuclear) and AutoPIPE Nozzle are correctly installed and licensed. AutoPIPE Nozzle cannot be licensed with AutoPIPE Standard. 1. Open model in AutoPIPE, ex: C:\ Bentley\ AutoPIPE V8i SELECTseries \ Examples\ WALKTHRU.DAT 2. Tell AutoPIPE which anchors in the model are to be exported to AutoPIPE Nozzle: a. Grids: Open the Model Input grids (Edit> Grids), select the Anchor tab, in the very last column on the right place a check mark in the box for the
http://communities.bentley.com/products/pipe_stress_analysis/w/pipe_stress_analysis__... 15/Oct/2013
Importing Nozzle Loads from AutoPIPE into AutoPIPE Nozzle - Pipe Stress and Vessel ...
Page 2 of 3
b. Anchor dialog: Place a check mark in the box "Report anchor results to AutoPIPE Nozzle"
3. Anlyze the model 4. Select File> Export> Nozzle Loads to AutoPIPE Nozzle. Note: See AutoPIPE online help for details about the this command and file format. 5. Providing everthing was installed correctly and licensed, in a few moments, AutoPIPE Nozzle should have automatically started. Note: If AutoPIPE Nozzle does not automatically start then starte the program and then select File> Import AutoPIPE... 6. On the "Import AutoPIPE Nozzles" dialog screen, " Select Nozzle PXF file" should have automatically been the filled in with the model name exported from AutoPIPE, ex: Walkthru must press on the drop down arrows to choose BOTH a "Selct Nozzle ID" and a "Analysis Set Number", as pictured below, before pressing OK button.
http://communities.bentley.com/products/pipe_stress_analysis/w/pipe_stress_analysis__... 15/Oct/2013
Importing Nozzle Loads from AutoPIPE into AutoPIPE Nozzle - Pipe Stress and Vessel ...
Page 3 of 3
After making a valid selection fro the 2 items above, press the OK button. 7. Choose a from 1 of 5 vessel "Orientation", and press OK button to complet the process of importing nozzle loads from AutoPIPE V8i. Note: AutoPIPE Nozzle can only process one nozzle at a time. When completed with the current nozzle, save the file, and then select File> Import AutoPIPE... to select a different nozzle ID to be processed.
See Also Bentley AutoPIPE
External Links Bentley Technical KnowledgeBase Bentley LEARN Server
Comments or Corrections? Bentley's Technical Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
http://communities.bentley.com/products/pipe_stress_analysis/w/pipe_stress_analysis__... 15/Oct/2013
Related Documents 3m3m1z
Importing Nozzle Loads From Autopipe Into Autopipe Nozzle 641x2k
April 2023 0
Nozzle Loads 2r355y
October 2019 205
Allowable Nozzle Loads 5f2x4d
December 2019 290
Pressure Vessel Nozzle Loads ppz
February 2022 0
Calgary 2011 Nozzle Loads Presentation 2b3y6
December 2019 73